MOZA Mini-MI | New Updated Advanced Calibration Tutorial

[@ahmadhusain5429]

I have done it dozens of times but it can't be used yet, please help

[@christopherrippel2463]

Why is PF & YF blinking?? Once calibrated, and turning on the unit, it come to attention for 5-10 seconds, then dies out with the flashing. Every time! What is wrong???

[@nemezida0024]

WOOOOOW We use it!

[@rmmonon5173]

Help! Firstly my setup was unable to do motion time lapse. I was unable to add 9 points to be followed. Later on I updated my firmware and now I am able to add points for motion lapse but Alas! the phone (gimble) is not following the points and remains at the same position.

[@TraveloTech]

please help sir. my moza mini mi tracking is not working.. its brand new .calibration completed but the tracking is not working properly. i select subject but the gimbel is up and down continually, what can i do

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@majeedthanoor]

I am also facing similar issue.I already contacted with supporting team.I am waiting for their reply.

[@ord4studio]

What is the format of the link to broadcast? There is only one rtmp field in the application, where should I write the key?

[@secretagentx-9908]

sunday chill commentary?

[@felipeacydc1289]

help... my mini mi 2019 spin out of control after calibration... what im doing wrong?

[@GudsenMOZA]

Hi, did you do the advanced calibration ？

[@pepelochas]

HOla,, mi dispositivo despues de unos segundos "se afloja" y se vuelve a caer.... por que sera???

[@chi11estpanda]

Why is this thing designed to have the tilt motor on the left side? Is it so the lens is on the bottom right corner when in landscape mode? I unlocked landscape mode and the app shows right side up so App looks fine, but at the same time everything for my phone is still upside down--notification bar, even when keyboard comes up, etc. I don't know why Samsung didn't think to make Landscape work for both ways 🤦‍♂🤦‍♂Ugh, this was not a problem with my Galaxy S8+ but now with the Galaxy S21 5G, it doesn't have landscape mode when turning the phone clockwise to place the tilt motor on the left and I can't turn the phone around because then the bar is blocking the camera...how bad is it to use the device with the tilt motor on the right??

[@abbi6203]

Please help me when i turn on my moza mini mi it's spinning i tried many times calibration and also i updated he firmware i try all calibration but i can't fi it .

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@abbi6203]

@@GudsenMOZA sir i send the email.

[@sgcko7]

@@abbi6203 did they respond?

[@YogeshjadonYj]

Sir My mosa mini gimbal automatically rotated right now he is in warranty. he took Delhi service centre. he told. We shut service center. Mail to company. There have gone 2 times are making crazy

[@toyingzt]

Hello moza Please solution, my mini mi dosn't work with my android Bluetooth not conectting with my phone Please solution

[@GudsenMOZA]

We will help you fix it.

[@toyingzt]

@@GudsenMOZA thank's for your respon

[@MikeCampbellmc]

I can't get my tilt motor to work so can't even get the rest of this going. I have seen nothing about getting the tilt motor to move - it's locked in place. Am I missing something?

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@frankothedrako4774]

Did you ever figure this out I am sick

[@frankothedrako4774]

Suck*

[@BlazshoNikolov]

What the heck is "electrical angle" and to calibrate that? Im stuck with "calibration failed" all day.

[@GudsenMOZA]

Hi there, please reach out to our service center: [e-mail], the team will help you out.

[@KALABAWCANADA]

I am trying to connect to my phone and it keeps saying i need to disconnect Bluetooth from another phone; I only have one phone

[@GudsenMOZA]

Can you please contact our service center for help? [e-mail]

[@shannonlovgren3359]

I am trying to recalibrate my Mini Mi but it won't connect. I've restarted both the phone and the Mini Mi. I have off-loaded and reloaded the app. Nothing is working and I am frustrated because the mini mi just goes crazy everytime I try to turn it on.... urghhh! I have followed all the steps in this video but never get past the connect to the device because I just get an x next to the selected device instead of "device connected" What can I try next?

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guide.

[@colours.of_life]

Mobile holder portion is heating after 15 minutes of usage and lose the stability control why?

[@GudsenMOZA]

It could be caused by reason of unbalanced setup.

[@happywithdolon]

How to reset calibration, please help me

[@GudsenMOZA]

Hi there, thanks for reaching out to MOZA team, you can contact our service center to help you out, [e-mail], thank you!

[@dragonsoul3039]

Please help! My mini mi keeps falling asleep and the roll arm is asleep too

[@GudsenMOZA]

Hello，please make sure it is well balanced，and make sure it is the latest firmware.

[@dragonsoul3039]

Gudsen MOZA I’ve done that but still the gimbal falls asleep and the roll arm doesn’t work. I’ve checked motor and it wasn’t burnt or hot

[@ursulaandrea237]

Can i use xiaomi redmi 5 plus?

[@GudsenMOZA]

Yes，sure

[@ursulaandrea237]

@@GudsenMOZA is the software compatible with redmi 5 plus?

[@GudsenMOZA]

The MOZA Genie is compatible with it.

[@dafjazz]

On my 3rd use of this Moza Mini-Mi gimbal, it shook violently and threw my cellphone and hit my LCD TV. What if it hit a person?? I would've been sued. Oh yeah, my phone almost broke into pieces too.

[@GudsenMOZA]

If you running some tech issues here, you can contact our tech team to see if they will help you to fix it. Email: [e-mail]

[@liltwistofcaine]

Like fuckin hell it does.

[@jake30966]

Why does mine vibrate when i switch it on even after calibration ?

[@GudsenMOZA]

Hello，please kindly balance the Mini-MI before you switch on.

[@jake30966]

@@GudsenMOZA Hi , Thanks for help it worked it doesn't vibrate now 👍👍👍

[@jake30966]

@@GudsenMOZA mine keeps going into sleep mode and i have to continually press the power button to wake it up and it only lasts for a few seconds then it does it again , is there an easy fix for this ?

[@GudsenMOZA]

@@jake30966 Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@dragonsoul3039]

Jakeyboy Bond i have the same problem

[@consulenteagrario]

anche nel libretto illustrativo

[@filiphurta6776]

My mobile spinning every time when i turn my gimbal on. This tutorial is bad!

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@meseendev]

Вылетает при попытке обновления или калибровки . Стедикам крутится как вертолет. Не покупайте продукты @UCHBIF5mblt4W0iPRKzU6qPA​ чтобы не иметь проблем

[@GudsenMOZA]

Is your gimbal facing these issues？You can contact our tech team to help you to fix it. [e-mail]

[@chronicle7138]

This is an incredibly frustrating device to set up. It should not be this difficult to calibrate. I've tried the upgrade about 5 times, each time I can't get pass confirm.

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@consulenteagrario]

ma un video italiano fatelo