I whatched almost every video you have maded . Because I'm dutch it's a little bit hard to follow some videos on KZbin, but your videos are great and easy to follow. The informatie is brilliant and told in a right tempo. It's helped me a lot to understand the complexity of FS2020 and to program them. Thnx a lot. Straight on!
@b0ris360 Жыл бұрын
The only video on this that I understood. Told me EXACTLY what to do without making assumptions about my knowledge level. Did so whilst making the video concise and without waffle. Subbed👍🏼
@Sebastopolmark2 жыл бұрын
GREAT video Kip. Every time I watch one of your tutorials, I can't say enough about how professional they are. As Matthew says, "Concise and Informative". Have a great 2K22! !! !!! Let's get to 25K in 22.
@ADPeguero Жыл бұрын
Gem of a video. Will need to watch it a couple of times to get it but so far it's the best put together and well explained one. Thank you for taking the time.
@mikevadnais77222 жыл бұрын
This takes all the frustration out when trying to use the World Map to create a flight. I will surely use these techniques for all my future flight plans.
@tonyevans2967 Жыл бұрын
Thank you for a very clear and concise set of instructions on how to pick up a localiser and glideslope. I have successfully landed a plane on instruments with ATC not shouting at me for the first time.🙂
@danmorand36582 жыл бұрын
Nice job (as always). You really have a talent for finding exactly the right balance between need-to-know and nice-to-know. Keep up the great work.
@flyinghorse27397 ай бұрын
I absolutely agree with that
@LowescC Жыл бұрын
thank you- the airway explanation alone is useful beyond words...
@donc97512 жыл бұрын
Great video! Flying in VR, using the g1000 has been a real pain for me learning to use the mouse in flight to manipulate the small dials is hard enough so thanks for the great info and explanation!
@andrefinken2 жыл бұрын
I bought myself the GNS530 from RealSimGear to make my VR-life a lot easier and more immersive. Via Spad.next (or Axis and Os) ich connected the hardware-knobs to the AS1000 bindings and now ich use a knob from the GNS530 (inner, outer and push) to navigate through my G1000 MFD. It even makes the planning-phase a fun-part.
@donc97512 жыл бұрын
@@andrefinken That sounds like a very cool solution to autopilot and more fun too! I looked into those programs before (spad.nxt and axis and oh's) but never spent enough time with them to learn how to properly configure, use and bind my controls with, but another look sounds warranted. Thank you for sharing that info with me Andrè!
@brunosolothurnmann92052 жыл бұрын
Thank you, I appreciate seeing the whole flight plan. This helps a lot to follow your explanation an do it my self.
@remsmith32334 ай бұрын
Again, presentation was clear, informative, and useful. Thanks
@hiortintexasracing2 жыл бұрын
Thanks Kip! I was just sitting in the Bonanza trying to figure this out when this video came up. Clear and to the point instructions as usual !
@franksmith94972 жыл бұрын
Well done. Your presentation was clear and understandable showing your competence as an effective instructor. Thank you.
@SHOCKSTRUT2 жыл бұрын
Thanks for taking the time to make this video. I purchased a Kodiak recently and this helps a lot.
@theophanie776 ай бұрын
So clear and straight to the point. Thank you ! Jean-michel.
@theophanie776 ай бұрын
I do not see the V158 airway when I insert after WACKS but only the choices NONE and the V216 once again. Did you have such behaviors ? Jmichel
@MatthewJohnCrittenden2 жыл бұрын
Concise and informative as ever. Happy holidays!
@TheFalconJetDriver2 жыл бұрын
Very nice job! I Fly airplanes in the real world and it nice to see such concise information.😀🛫
@mikevadnais77222 жыл бұрын
Just another excellent training video. Thank You again Kip for all your hard work making our lives a lot smarter.
@justinbouchard8 ай бұрын
this is an absolutely fabulous lesson you have chosen what to share very concisely it is fabulous, thank you for this.
@KipOnTheGround7 ай бұрын
Thanks, glad you enjoyed it!
@justinbouchard7 ай бұрын
you're very welcome :)
@peterprow15472 жыл бұрын
Thanks so much for this. I was tearing out my hair with regard to pressing both mouse buttons to select the cursor!
@MartianSolarbuddy10 ай бұрын
Thanks, Kip, for this! I've been *trying* to get the flight-planning part of the G1000 figured out. Eery video I've watched seemed to magically progress without me seeing exactly what was done. The UI on the G1000 is "simple" to those who already know it, but it's a nightmare to us noobs. I was able to set up and fly both of these flight plans per your excellent instruction. Super job! My next step is to see if you have any NXi videos.
@taronov2 жыл бұрын
Another awesome vid. Thanks!
@ShannonNewbold2 жыл бұрын
Thanks for the Shift key for adjusting the MDA. I hate landing at airports at high elevations. Takes forever to dial it in.
@Jacob-gg9mp Жыл бұрын
Excellent, really excellent.
@jackwoud2 жыл бұрын
Thank you for the explanation Kip, it completed the picture regarding the latest version NXi. I wish you a happy New Year's Eve and a good start in 2022. Greetings from Jack from IJmuiden the Netherlands.
@kidkokonut45812 жыл бұрын
Love your Videos. Found a "Trick" - If you press and hold left Mousebutton, moved Mouse sideways. Will increase input fast; keep Holding LMB and use Mwheel for Finetuning. 😎
@KipOnTheGround Жыл бұрын
Yep! I actually like the new "lock" mode in the sim, though some despise it. Another trick that works with many knobs is to hold SHIFT while using your mouse wheel. It will double the rate at which it turns, e.g. it'll move 2 degrees or 200ft or 2 letters at a time instead of 1.
@sadunlap12 жыл бұрын
Hi Kip. Thanks, and Happy Holidays!!
@KipOnTheGround2 жыл бұрын
Happy Holidays Steve!
@angryrick2330 Жыл бұрын
This video helps a lot. Thanks!
@benvanboom8907 Жыл бұрын
This is so clear …..thanks KIP!😊
@RemyLabue2 жыл бұрын
Thanks for the vid, didn't know you could hit enter on start or end airport to bring up it's info. Thanks for teaching me something new. Could you please go over the real world procedure for programming the flight plan? Would pilots know in advance the runways they're using or do you have to ask when you get to the destination and then program in the arrival while in the air? I would love for someone to cover a quick short flight to explain how to do that while communicating with ATC. Thanks in advance.
@KipOnTheGround2 жыл бұрын
I do plan to do some full flight type of videos, so it’s good to know that’s what you’re looking for. I’m not a real world pilot, but listening to the ATIS will give you active runways and approach information at towered airports. Until ATC clears you for taxiing and departure, and an approach and landing, you don’t know 100% for sure, but you can be well prepared for what is likely. While the MSFS ATC will give you simple “climb and maintain” instructions for your departure, and also assign you an approach, it will not assign an actual DP/SID or STAR, so if you want to follow those procedures you just need to do it on your own accord in this sim. Hope that helps for now :-)
@Drmerlin604 Жыл бұрын
Excellent tutorial. Really helpful. Thank you.
@ccmorrison332 жыл бұрын
i needed this in my life - thank you SO much! happy flying :)
@IamKvothe2 жыл бұрын
Once again an amazing video... informative, entertaining... outstanding job! Thanks from Spain, I'm hooked on your channel!
@Maddog-he5uf Жыл бұрын
Well done, thank you.
@TheSkilledballplaya Жыл бұрын
2:48 you can also click the little keyboard sign right after the airport code and it lets you type it in on your keyboard :) i learned this from another video just minute ago :D
@capevisser2 жыл бұрын
Thanks Kip. I always enjoy your informative instructional videos. Happy New Year!
@zacky5315 Жыл бұрын
Excellent... thank you.
@rogerwatts55662 жыл бұрын
Hi Kip. Excellent video once more. The only bit that was too quick for me was when you added the departure runway to the flight plan. I have tried everything but when I highlight the departure airport i cannot open up the window to choose the runway.
@haroldmorash6752 жыл бұрын
Another great video Kip! Thanks...
@ozbert19692 жыл бұрын
Thanks for the tutorial Kip, I got all the way to the end and then crash to desktop, lol. At least I get to practice entering it all in again.
@KipOnTheGround2 жыл бұрын
Ahh, bummer :-( It seems like the sim crashing on final has been happening to people often lately.
@ozbert19692 жыл бұрын
@@KipOnTheGround The great news is I now have the process in my memory and can now make my own plans. I love your work, explained very well and a breeze to follow - how can I send you a tip?
@Adventure4942 жыл бұрын
Great vid Kip, thanks again!
@luciaguilera7068 Жыл бұрын
Excellent!
@3mate1 Жыл бұрын
LOL I got pulled over in Baraboo by a tribal cop who gave me a hard time because I was still going the speed limit from the outside town before the speed change, but I saw him right as I saw the reduce speed sign and stopped before the speed change. He threatened to take my license because I was from MN and out of state. I told him I was on my way home from a ship and I had been at sea for 2 months and I let the speed get away from me, and apologized. I looked like shit from working my watch before getting off in Port Inland MI. Anyways he did a double take when I said that, ran my license, and called me sir when he let me go. He went from asking me what I was doing in his community because I didn't "have any connection here" to "have a good day sir, drive safe" pretty quick.
@corumuk672 жыл бұрын
Great tutorial. Thanks.
@Djeez22 жыл бұрын
You forgot to mention how to insert a waypoint in the enroute section. I learned that yesterday: highlight the waypoint that you want to “move down” and just start rolling the inner FMS knob. Easy, but not very intuitive.
@KipOnTheGround2 жыл бұрын
Ah, yes you're correct that I didn't cover adding a waypoint between others. I think of it almost the same way, but as "where do I want to add the waypoint", so if you highlight the second waypoint, the one you enter becomes the new second waypoint. Thanks for pointing that out.
@jakew98872 жыл бұрын
Excellent Video. Thanks
@wollaminfaetter2 жыл бұрын
Great tutorial.... and i can tell because i have seen a lot.
@weircottage2 жыл бұрын
Brilliant! Thank you.
@boardingtime95872 жыл бұрын
Thank You! This was really helpfull!
@davidotto8677 Жыл бұрын
Excellent video. Quick question: For some reason, my NXi always opens new trips with an IFR flight plan prepopulated when I choose to fly IRF. It asks low or high route IRF, then populates waypoints in the flight plan. I'd rather start from scratch. Can this be shut off in the settings?
@PablosCZ2 жыл бұрын
very helpful, thanks
@jonridley6 ай бұрын
Thanks
@danienwalls73259 ай бұрын
Great!
@SVS96DAN2 жыл бұрын
Very good job Thanks
@heyjoe93022 жыл бұрын
Excellent video as always, Kip. I learn so much from your tutorials and it makes me enjoy MSFS more. One question. When I enter a departure or arrival procedure, I sometimes get a waypoint called MANSEQ. This creates a gap in the flight path. Do you typically delete MANSEQ from your flight plans when they appear? Or do you delete the whole procedure and find one that doesn't have MANSEQ?
@KipOnTheGround2 жыл бұрын
Thanks Joe! MANSEQ is a "manual sequence", which is a leg in the flight plan where you have to (as it suggests) manually sequence/advance to the next leg in the flight plan. This isn't something that MSFS ATC handles correctly, but during a MANSEQ in a departure/arrival procedure, you'd expect to get vectors/headings from ATC, and then eventually be cleared to continue on course. Once cleared, you'd advance to the next leg in the flight plan by pressing the SUSP softkey on the PFD. If you don't want to deal with the step of manually sequencing, you could just delete the MANSEQs before encountering them. It wouldn't be as realistic but it'd be convenient :-) It'd be great if MSFS ATC handled departure and arrival procedures more thoroughly in the future, but for now they're very simplified. Hope that helps!
@tsw113852 жыл бұрын
Yeah Mate!
@pgustafson53 Жыл бұрын
Hi Kip! Great job on the video! Just what I needed. Two questions: 1. In World Map, we have the option to Save our Flight Plan; Can we do the same after putting in the Flight Plan manually via G1000? 2. How do you associate the Flight Plan to the Autopilot, or can it be? Do you have to manually move the Heading to follow the Plan? Thanks so much! Gus
@KipOnTheGround Жыл бұрын
#1 I'd have to test, but I'd guess no -- the "save" menu while in the sim/plane I believe will just save the state of your flight so you can resume it, though I've never used it. #2 yes, generally your autopilot's NAV mode will be coupled to the GPS so it will follow your route. First, make sure the G1000's NAV source is set to GPS (magenta colors on the HSI; if not press the "CDI" soft key to change it so it reads GPS and is magenta-colored) -- not VOR1/VOR2 (those are for navigating by VORs, not GPS). Next, you need to fly close to your course before NAV mode will activate. You can see me explain this here: kzbin.info/www/bejne/nHKVpXeOj91kqZI
@andrevdw7474 ай бұрын
Thanks Kip! One question, when flying enroute, I use a direct-to. But if I want to replace the direct-to with a FPL then the direct-to stays and can't be removed. Any idea how to do this. Many thanks!
@Flight2312 жыл бұрын
All traffic displays on the traffic map are gone in the latest update 8 from Asobo?
@charlesmarschall13752 жыл бұрын
Is anyone else having problems with the flight planner producing ILS plans that don't work since SU9?
@JoeDFWAviation Жыл бұрын
I can’t get the keyboard input button to work
@Wileybird035 ай бұрын
Can you just type in (V9) for the airway
@kenknowles514 ай бұрын
Great video! Learning the G1000nxi on the P100 but I ran into a problem. I’m routing EGPH06 GOSAM1D P600 BLACA DCT EGAA25. EGAA has no published arrival, so I end up with an enroute section that terminates at the waypoint BLACA. The next waypoint is the CF for runway 25. This results in the leg from BLACA to CF25 not connecting. I realise I can go direct from somewhere on the previous leg but I’d like to flight plan to be continuous so that the TOD and VPTH is correctly calculated before I depart. In the Airbus I could just clear the lateral discontinuity and link BLACA to CF25 but there doesn’t seem to be any way in the G1000 to link the last enroute waypoint directly to an approach without an arrival. Is there a way around this?
@bigc2082 ай бұрын
Can you save the flight plan for later use?
@rustyr0824 Жыл бұрын
Great video. I'm new to all of this. I was wondering how you actually execute the flight plan created. I understood how to create the starting point and ending point from inside the MSFS main map screen and understood how to plug in the various way points but how to actually have it display the flight plan. When I tried even though it was stating a starting point a leg and an ending point, the pink link only showed from starting point to leg, it didn't also show the ending point. Thanks
@JobuRum2 жыл бұрын
When choosing an approach is there anyway to zoom the map out? I tried using the range knob but didn't do anything.
@KipOnTheGround2 жыл бұрын
Not while seeing the approach preview, unfortunately not. It’s possible that’s how it works in the real G1000 (the WT team replicates behavior as closely as they can to the real thing) but I can’t verify :-)
@timharris7425 Жыл бұрын
Nice clear presentation, but I have a question about the flp, I see that all the waypoints are the same altitude is there anyway to select each target altitude for each waypoint, cause in the navlog it has the right altitudes for each waypoint, but the flight plan just shows one altitude for every waypoint, any thoughts on this would be appreciated
@andyprobert70406 ай бұрын
Is it possible to insert a new way point or procedure into the middle of a flight plan? Thanks for the great video.
@KipOnTheGround6 ай бұрын
Yep, just highlight the spot you want the new waypoint to be inserted at, then roll the inner FMS knob as usual to start entering that waypoint. Procedures are always separate from the enroute waypoints (Departure, Enroute, Arrival, Approach, in that order)
@defreitj Жыл бұрын
10Thanks!
@defreitj Жыл бұрын
Best I've seen, with clarity and precision without mumbo jumbo!
@KipOnTheGround11 ай бұрын
Thank you!
@Nork393 Жыл бұрын
Very helpful video! I had been trying to program flight plans from scratch using the PROC page instead of the FPL. I was noticing that while the flightplan looked correct, once i arrived at the end of the departure procedure, the system seemed unable to move to the enroute/arrival/approach procedures. I'm trying to understand conceptually why that method of coming at it all from the PROC page doesn't work. Do you know? Separately, i'm wondering if its necessary to have at least one enroute waypoint. I was trying to go from L35 to KPSP using the RWY 08 departure out of L35, and then, because the airports are so close, directly into an approach procedure for KPSP, RNAV 13 I think it was. Is that possible to do?
@Nork393 Жыл бұрын
Ok, after some more experimenting, I think my issue actually had to do with my choosing VECTORS as the transition option rather than a transition at one of the IAFs. In a VTF approach, when the flight plan gets through its enroute waypoints, does it then wait for the pilot to instruct it which of the waypoints to vector to, rather than automatically heading towards the first waypoint in the list? If so, whats the proper way to tell the autopilot which waypoint to head to? Seems like you can do this with the DIRECT TO function, or with the ACTIVATE LEG function in the MENU.
@larryedwards5703 Жыл бұрын
Kip on the Ground: Excellent helpful video. You are to be commended for your easy to understand strategy. I flew this exact route using every word of instruction and it was just like you said. Question: I cannot get my Range knob to range in and out. Could you explain how I can get it to work. You seem to just push the knob and it zooms easily for you. Also, somewhere along the line, I lost the MFD image of the route. I did however, view it on the VFR map. Perhaps there is something I can do to zoom in and out to see and follow my FPL. I did discover that by turning on the Nav mode, the FPL was followed automatically down to runway 25. I was surprised that I did not have to switch from GPS to Loc 1 to intercept the localizer nor the GS Glideslope. It was automatically done, even from 2700 ft at the iaf to the faf at 2500 ft. Have learned a lot from your amazing teaching. I heard you say, one could join your discord. What is that all about and if I did, what should I expect?
@barrywells31952 жыл бұрын
Downloaded G1000nix and now my lochtec autopilot modual not working How do I Uninstall it
@KipOnTheGround2 жыл бұрын
Go to profile / content manager within the sim to uninstall things from the marketplace
@amol16082 жыл бұрын
Awesome video. Really helping me get a grip on this. One question though. On the first plan you programmed the approach, and on the second plan you programmed departure and arrival. How to you know that the waypoint given on skyvector or simbrief is a waypoint for arrival and not for approach? Or am I missing something here? (probably am, as I am just starting with this). Could you also add approach even if you have arrival programmed?
@KipOnTheGround2 жыл бұрын
Thanks! For the second flight I programmed in this video, if I actually flew it, I would have been assigned an approach by ATC into KBOI when nearing the destination. I'd then use the PROC menu to add the assigned approach. I also could have looked up the most recent weather info for the destination airport (or ATIS ideally) to take a guess at which approach I would likely get, and pre-program it. When ATC ultimately assigns you one, you'd just use PROC menu again while in-flight to load the approach they actually assign, if it's different than the one you guessed. Hope that helps!
@amol16082 жыл бұрын
@@KipOnTheGround thank you for explaining!
@angryrick2330 Жыл бұрын
Also is this nxi still a mod or is this like base game stuff now thats been integrated?
@DrStrixАй бұрын
Great video, much informative and clear, but a bit to fast :) My brain don't work in that speed....
@lucasstory2 жыл бұрын
Pretty sure you don't need to turn off the keyboard mode after entering a way point. I've never had to turn it off.
@bernardomelo13002 жыл бұрын
Thank you...........APRECIATE! abraço
@sellis682 жыл бұрын
Is there a way to have the plane automatically turn at each way point or do you need to change your heading manually?
@XCougar85X2 жыл бұрын
Thanks a lot. Really helped with me fumbling less. Btw, how did you get the altitude to show up at the routes?
@KipOnTheGround2 жыл бұрын
If you mean the altitudes in the flight plan, those will be added automatically when you load an approach procedure. Once you have an approach loaded, you can also edit the enroute altitude constraints if you want -- you can learn more about that in this video: kzbin.info/www/bejne/mpWoZKeYZpp4oKc
@XCougar85X2 жыл бұрын
@@KipOnTheGround Thank you so much. Really doing a great job
@thomasmullee30493 ай бұрын
What if ATC gives you an other runway after programming everything into it ? 😲
@KipOnTheGround3 ай бұрын
They could even give you a new route in an IFR clearance, too :-) Just need to be able to react to it and program in the changes!
@abbynormal73892 жыл бұрын
Always the best....& how do u get the Nobs/buttons etc to highlight when u put the curser over them ? Thanks
@KipOnTheGround2 жыл бұрын
It's part of the newer "Lock" cockpit interaction system. If you're on "Legacy" then you won't get the highlighting. You can change between the two under General Settings > Accessibility > Cockpit Interaction System. If you haven't used the "Lock" system before, you may need to reset your mouse settings to the default profile (use the blue arrows under the word Mouse in the control settings area to choose "Default". then rebind any custom mouse settings you had before). I'd recommend enabling the tooltips under the Accessibility area too for a bit until you get used to how to use the new system, because it can be a little confusing at first.
@andrewjamez2 жыл бұрын
can you import a .pln file that was exported from say little nav map?
@KipOnTheGround2 жыл бұрын
Only via the world map, not in the NXi itself. Find “load” at the very bottom of the world map screen.
@gabrielgcosta2 жыл бұрын
Hey Kip! Excellent video! I have two questions: 1) for some reason I passed through a waypoint and it didnt went to the next one automatically, when trying to fix it, I pressed on the direct to button and I could never get back to the my FP, I had to complete everything with the direct to mode. Please, do you know how I cancel the direct to mode and get back to the FP? Is there anyway to instruct the garmin to jump a waypoint in my route? Thanks for the great content!
@KipOnTheGround2 жыл бұрын
To go from Direct-To back to flying a leg in your flight plan, open the FPL screen on the Garmin, and use the FMS knob (press it, then turn it) to highlight the waypoint you want to fly to. To activate the leg between the previous waypoint and the one highlighted, press MENU, highlight "Activate Leg" and press ENT. To fly from your current location directly to the highlighted waypoint, press the D-to button instead, then ENT twice to activate it.
@michaelchomiczewski79372 жыл бұрын
Thank you for yet another great tuotorial :-) When entering depaarture aiport, is it possible to use the 'nearest' list as a shortcut? Since we are alredy at the airport in question - presumably this would be a fast way to select the departure aiport. I tired doing that, but I can't seem to do anything with aiports in the 'nearest' list other than use Direct To or load an approach.
@KipOnTheGround2 жыл бұрын
Unfortunately not :-(
@rainst85 Жыл бұрын
Can you plan the ifr route in the g1000 and then ask atc to authorise it?
@KipOnTheGround Жыл бұрын
With the NXi specifically, you will be able to do this with Sim Update 10. It’s supposed to be released this week. Here’s a video I made about the updates coming including the ATC sync: kzbin.info/www/bejne/i2m4pXStmNV3p9E
@rainst85 Жыл бұрын
@@KipOnTheGround I am on the beta branch, I will watch this video, thank you mate!
@sabahalsowaifan53522 жыл бұрын
thank, how do you get the knob to be led and blue when point it
@KipOnTheGround2 жыл бұрын
General Settings / Accessibility / Cockpit Interaction System needs to be set to "Lock" for the highlighting to happen. It's a different way of interacting with the controls, so if you haven't used it I'd recommend turning on the 2 tooltip options in that same area so you can get used to how it works.
@mih1959 Жыл бұрын
Being a stupid rookie i always thought flying would be fast bcs you go just the beeline between A and B, but all those VIAs and airways makes it like driving a car in some roadworks-infested city. Why are all those "detours" necessary, i can also go a straight line guided by GPS, which is probably very "un-pilotly"?! ;-) Nonetheless thanks for your teaching us :-)
@KipOnTheGround Жыл бұрын
If the weather allows it, you could definitely just fly VFR directly to your destination! IFR lets you fly in non-ideal weather conditions, though it comes with more specific routes that ATC will assign you as part of your IFR clearance. For this video, I intentionally chose several different IFR routes to demonstrate since a direct-to flight plan is obviously much simpler :-)
@mih1959 Жыл бұрын
@@KipOnTheGround Understood. If you can't see a thing you want as much "lighttowers" as possible and small steps between them to find your way ;-)
@leegilbert75512 жыл бұрын
Does the NXI pop out yet?
@KipOnTheGround2 жыл бұрын
Always has been able to as far as I know! I pop it out onto separate screens often.
@bertobones71822 жыл бұрын
🌟🌟🌟🌟🌟
@redneckrandy2 жыл бұрын
mybad
@rekunta2 жыл бұрын
This system is incredibly frustrating to learn. I can follow well enough step by step, but each menu seems to have five sub menus which have five sub menus which again have five sub menus. And each input at whatever level seems to affect something where I have no idea on what tier subsystem it’s relevant to. It is one of the most unintuitive, clusterfuck interfaces I’ve ever seen. I input departure, arrival, then I attempt to do approach and it for some reason deletes everything I’ve previously inputted. I would love to understand how to manually input waypoints and airports, to change destinations on the fly, but I guess the world map will have to do. I’m trying to experiment to get a feel for how this system operates. Yeah right. This thing is a fucking nightmare to use.
@peejay1943 Жыл бұрын
Slow down please. Why are you in such a rush!!
@greenops.1437 Жыл бұрын
Missed 4 steps,. Not a subscriber....gotta move on.