Mugen MBX8R Diff build with Ice Berg!…Rainy day tips from the race hauler!!

[@charlesdekeadorcdriver2118]

Good stuff dudes!. This is R/C to me, couple buddy’s cutting it up keeping our hands busy building cars🤘🏻🤘🏻🤘🏻

[@noprorc9365]

Definitely!!… a bit long for a video , but more fun!! Thanks Charles !!!👍🏽🚀🏁

[@_heckler_]

I'd like to drink a beer with Iceberg.

[@sebastienr.5037]

Tx for this video. You don't use shim 8x10x0,1 before install bearing like Adam Drake in his diff ?

[@noprorc9365]

I do not, I like to be able to adjust the shimming if needed without having to disassemble the diff.

[@sebastienr.5037]

@@noprorc9365 Tx for your response. It's exactly why I hesite do to this before the build !

[@sebastienr.5037]

@@noprorc9365 You use 1 shim in each side ?

[@noprorc9365]

@@sebastienr.5037 99% of the time I’m running a 0.2 on the gear side front and 0.3 on the gear side rear… I never run shims opposite of the gear side as it’s not necessary.. if you needed shims opposite the gear side that’s telling me the gear side is over shimmed and needs to be pushed back.. at that point the diff is shimmed to tight… so I just do the gear side keeping the mesh close but free.. then let the diff find its own sweet spot on power 👍🏽👍🏽

[@sebastienr.5037]

@@noprorc9365 thank you for this constructive response 🔥