Multi Crew Cooperation basics. Go around and ILS approach on Airbus A320 - BAA Training

This time our volunteers Marija and Rimantas try to manage normal approaches and ILS and basic go-around in the Airbus #A320 #FullFlightSimulator. Can you name all the mistakes that have been done? Feel free to comment them - let's learn together!
www.baatraining... BAA Training Aviation Academy is European standard aviation training center, where the experience of tailored training solutions is wrapped in the personal care.
BAA Training headquarters is in Lithuania and counts more than 20 years of experience in aviation training, while its heritage reaches 1938 - the establishment of the Lithuanian airlines training department. In addition to training base in headquters it is able to offer training solutions in various Europe, CIS and Asia locations.
Follow us
Facebook: / baatraining
Twitter: / baatraining

[@marcopolo1984]

the spoilers are either missing from the after T/O checklist, or something else is wrong. Every time after take off the F/O is like "oh! spoilers disarm" Why is that?

[@farayidarlingtonchaparadza20]

Yes, seems like an afterthought all the time.

[@PilotSwitzerland]

This video is full of mistakes .. hands on throttle after v1, wrong fma callouts etc.

[@brianhealey9738]

I also doubt you would be slamming thrust all the way. I don't think your airline would like that.

[@rawdata136]

Read the description, nothing further!

[@rawdata136]

Hi Briam, As it seems you are not familiar with Airbus procedures let me explain them for you. In case of go around (which was the case in this video) pilot flying is supposed to select TOGA (take of / go around). Feel free to check it in FCOM and FCTM if you have them at your disposal of course ;).

[@polumordvinov]

Not autothrotle! Airbus has autothrust. When going around you have to make a call out "go around"! Pilot flying is forgetting about checklists. When reading after take off checklist PF seems to check it only on flap lever, not on ecam. Etc.

[@vorontsovsemyon6897]

I do not sure about flaps checking, because flaps lever can be at position 0, but due to hydraulic failure or flaps/slats jamming actuall configuration can be still 1 for example or vice versa.

[@joelsamuel8962]

CRM basics, many mistakes! Transfer of controls prior briefings was completely absent , pilot flying manually should never push or select anything.

[@vicentethomaslopezcortes7712]

First of all, after v1 you must take out your hands of the thrust levers… they missed call out “thrust set” during the roll and they were making a lot of procedures in the runway… if you all will teach and show people studing a320. Make sure to make it correctly …

[@rawdata136]

Nice video guys! Congrats to both Marija and Rimantas for stepping in front of the cameras and trying to explain something for others who don't have access behind the cockpit doors. Yes the video has some mistakes but considering the fact that none of them are TR for the A32F I would say they did pretty good job! Anyways keep up the good work!

[@awkerper]

For those of us who are not pilots, it's neat to see this. Thanks for sharing this video! :)

[@jorgepozo280]

Pues 14:45

[@rmnsvn]

Bring Pranas back we don’t want new guys

[@yousefadel6349]

Роман Савин true

[@Croatiair]

it is ok if new guys know what the hell are they doing, but if not then better bring someone who knows...otherwise it is just kids playing in sim..

[@richardc6038]

The new guys don't know what there doing and Pranas would be ROFL

[@officergregorystevens5765]

These people have lives - we can't expect the same guy to do these videos for years and years.. they're in school for a reason. To become pilots, and move on from school. Would you rather have no videos? Because at this rate, Christmas is cancelled.

[@captaina330]

where is captain pranas drulis !llllllllllllllllllll, ????

[@ytkdmr]

@01:43 why your hand is still on thrust levers after V1 ?

[@43sq]

Guys next time you have to pay attention to put you set belts on, cuz it part of the operation

[@sztojanbarna]

11:47 First Officer missed the "Positive Rate" callout for Gear up. 4:17 Minimums are 359ft, yet she went all the way down to 200ft ( 11:20 ). A good pilot practise would be that you start TOGA 100ft before or at minimums according to my A320 instructor having over 25k hours of total flight time. All in all, awesome video guys!

[@henrikolsen5]

Generally remember DA (decision altitude) is used for a precision (ILS) approach and not an MDA, as I understand. You decide a go-around/continue _at_ DA and are allowed to go slightly below on a go-around. And also remember difference between AMSL vs RA for the minimum callout.

[@banditfpv]

Read the description, these people are making mistakes cause they are only trying, the description even says can you spot all the mistakes.

[@shikhrrr6275]

Has Pranas got job?? 😃😃

[@bohdankovalchuk8137]

Did I missed something? Where is Parnas? 😀

[@MauritsVeen]

Many mistakes

[@j.g.a7564]

Great video, I have one question: why do you set the heading on the autopilot if you’re flying manually? My understanding is that you set a heading when the A/P is engaged but I saw something different here. Why is it so? Thank you very much!🙂

[@nielyeehk]

They are setting the heading bug. It's a little magenta dotted line that shows up on the ND to assist with the roll out.

[@firstcapt75]

It’s mainly used to control FDs used as reference by pilots

[@Sethorion99]

I once heard a 737 pilot say in a livestream that it helps them remember where they're going, and that it's also very embarrassing if you forget to check the heading bug before you enable the autopilot - too late to find out it's off in a weird direction.

[@cheburatorish]

Personally I see no reasons to fly manually with flight directors. It is just same job that the autopilot would do. There is no failure which would incapacitate the autopilot but leave the flight directors unaffected, afaik. So let the machine do the machine's job and save the crew resources for the crew's tasks.

[@EldarKhaitov]

@@cheburatorish I think the same way, cheers

[@KINGKEN222222]

they got missing Spoiler Disarm task, I think so

[@VincenzoMarzano]

Why does she use the joystick if they are setting the heading on the computer?

[@tomlapilot-jo5to]

He is setting probabaly heading bug only not autopilot in hdg mode.As i can see, she flys manualy all the time.

[@sajidshaikh4378]

can any body tell that what will it cost to do SPL,PPL,CPL in BAA..

[@GGSTop]

Shitloads.

[@gabgaabs]

It depend the country

[@goldeneagle1852]

Beautifull

[@officergregorystevens5765]

Nice beard.

[@ANANDUACHARRY]

where is pranas drulis pranas, drulids........... love from india

[@vicentethomaslopezcortes7712]

Cant believe this.. why she has his hand always in the trhust if she made a little move she can disconect the autopilot during the app

[@vicentethomaslopezcortes7712]

And the A/ths

[@vicentethomaslopezcortes7712]

CANT MISSD THE CALL OUTS

[@vamac53]

do the keys set up in fsx steam work on aerosoft a320?

[@sebastianfischer429]

mike mccarthy I don't think they use FSX, because its not allowed for training.

[@miguelbazzano2484]

Jesussssss Christ!!! I really understand why it shouldn’t be use for training purposes!

[@TheNautliev98]

Landing checklist and no gear check wtf?

[@adriangm5590]

I think that when they say ecam no blue is already ckecked there , but I don’t know if that’s good or not

[@MSA3568]

Well tried. Easy on the MW/MC Push buttons 😜they do crack!. English can improve a bit and do fasted your belts and shoulder harnesses, but well tried!

[@hussainpathan2012]

Your name is subhan Allah mariyam

[@krisaussie1986]

cant work...

[@kirkmartin4005]

Good video

[@Dante1243]

11:39

[@yuriyyuriy4623]

a complete failure on the procedures!!!✈

[@BOSS-gu9bn]

6/10

[@kevinbaird7277]

I am fixing up a kid's bike at the moment and i can clearly see the many mistakes, the spoilers especially, this plane would have stalled, checklist is too casual, much more discipline is required in this cockpit, nice girl though, if i was going to die i would want her in the seat.

[@federicspeti5394]

wow this girl just busted minimums so bad.. She even noted that our minimums are gonna be 359. at 400 - no ground visibility 300 - still no ground visibility, the copliot calls out minimums (late tho) and the captain keeps waiting til 200

[@preciousmsipa2744]

lol

[@t0mas]

That's not how it works. You brief minimums as an altitude referenced to sea level (AMSL), the call-outs are based on the radar altimeter so they are referenced to the ground (AGL). The minimums are 359ft AMSL, with airport elevation of about 180ft that means the 200ft AGL call out from the radar altimeter is at 380ft AMSL so above minimums.

[@Userznxbdjr]

full of mistakes flaps should be taken out earlier before he plane stalls !

[@johnny310xx]

OMG from 4:17 she keep puttin her fingers on the MCDU screen and the PFDduring her « briefing » lol …ohhhh Know we know whos doing this !!! …. This video is full of stuff you shouldn’t do …. Lol Whut a joke

[@chopper6777]

these peoples are amature. i wasted time watching this video.

[@chopper6777]

this video is not helpful!!!!! you must study airbus menual thoroghly!!! she lacks knowledge!