Multiview on the ATEM Mini?

What does it take to enable multiview on the ATEM Mini?
Here's all the products shown in this video:
Blackmagic ATEM Mini: geni.us/atemmini
Just get the ATEM Mini Pro instead
geni.us/atem-mini-pro
PK1 Stand for ATEM Mini
pk1.tv/atem/?ref=apk_old
My favorite HDMI recorder: geni.us/h9gA7C
Slim 15" HDMI monitor: geni.us/9Y2MJ
Multiviewer: geni.us/trAJRpt
HDMI splitters: geni.us/o9GIhk6
5-Port USB power: geni.us/7ho8RU
Short micro USB cables: geni.us/kz0RP2
Short HDMI cables: geni.us/q3IBUnj
---
My other ATEM Mini videos:
The 3 Best Things about the ATEM Mini: • The 3 BEST THINGS abou...
How to unlock the secret pro features: • How to unlock the secr...
How to add titles and graphics with the ATEM Mini: • How to add graphics an...
---
This video was filmed with:
Lumix GH5S geni.us/lumix-gh5s
Sony a6400 geni.us/CVd2r
Sigma 16mm Lens geni.us/o8BA
Samson C02 Microphone geni.us/5hl7O
Big light geni.us/aputure-120d

[@aaronpk]

Check out my video on the just-announced ATEM Mini Pro, which now includes multiview built in! kzbin.info/www/bejne/oGrMe5ublKZlq6s

[@sapphoto]

As a teacher with a limited budget I just started looking at the ATEM mini as a solution. This is actually a great video to show the options and considerations. Thanks!

[@Thepuppetmayor]

its June 23rd 2021 and after reviewing all the "experts" tutoring (three days in total) about this Atem Mini "Saour" that does not come with Multiview set up, I have found you and really I cant be more than happy finally watching such helpful video. I really enjoyed how clever yet brilliant you are Aaron. You have definitely saved me throwing this device while no knowing what the heck was wrong that I could not see my 4 cameras. I thought it was due I am turning too old already for this kind of cybernetic challenge but really you have giving me hope. Thank you very much from Miami, Florida. Best of luck!

[@DanielPassos]

I’m not a pro, I’m just a single guy helping my wife on her KZbin productions and live, this trick helped me a lot. Thanks for sharing!!!

[@BrianEller-begrafx]

This is really cool. One needs to keep in mind as we watch this that: a) This was referring to the ORIGINAL ATEM Mini. The ATEM Mini Pro DOES have MultiView, though with it you are stuck trying to decide whether you want to send "Program" or "Multiview" out the HDMI Out port; doing something like this video shows WOULD allow you to send a PROGRAM out to whatever output you desired, AND still have a Multiview display for camera selection. b) While in this video he has a lot of stuff packed onto his desk, you need to keep in mind that in any actual production environment, your cameras are PROBABLY not going to be as close to you as this, so the "clutter" wouldn't be an issue. c) It's a great option to keep in mind.

[@mcpkl3676]

Thank you for sharing this. It is very helpful for me and my team. We didnt think of that multiview device till we watch this video. Gonna share our setup soon!

[@brianoconnell3237]

Really informative regarding the requirements for a solution, some wise advice and fun to watch. Well done!

[@rrho170]

Tip. Double stick or Velcro the gear to the back side of monitor or under desktop.Helps organize and hide the bundle. Great Video!

[@grasworxTTGameplan]

i liked the touch with the USB power. Couple other solutions had plug in power and that turned this whole package into a crazy mess...well even more of a mess.

[@Drmikekuna]

I appreciate this video. I didn't even know that you could buy an inexpensive gadget to do multiview... now I do!

[@terrygibson8876]

Good stuff man😀 Love the honest retrospection! 😀

[@zaheedahmed]

Thank you very much!!! you made my life easy!!!! Only You missed out is the link for buying 5 volt usb to mutiviewer power supply . Please add so that we can easily add to cart, becaue we dont know the berrel jack size

[@AventuriLaAntipozi]

Common sense things, down to earth and easy to understand, love your approach, thanks

[@marksouzacosta]

It ended up way better than I was expecting

[@zephanmoses]

It's a great setup for the right purpose/use. I think in the end my concern would be the cable run on an HDMI cable is very limited. I went with the Blackmagic Bidirectional converters for under $100 a piece so I can run SDI cables and have a few hundred feet rather than be stuck around 15-25 feet away from the camera.

[@aaronpk]

Yeah, again this is not targeted at the professional broadcast crowd, so there's no SDI inputs on it like the ATEM TVS has. That's another reason I use the TVS at gigs where I'm gonna have 150 foot cable runs, cause I can use just one HDMI-SDI converter at the camera and bring the SDI right into the switcher

[@igorsim8170]

Hi. Does Atem mini effects quality of incoming signal passing thru? Could I use multi viewer with v mix and do my switching in there? Thanks.

[@takisbabaris]

I admire your honesty

[@LFS316]

I love your later suggestions to just get and ATEM mini pro. Got me laughing)) I Shute hope to get one someday though . Great work . Thank you

[@videoeditorbloke]

Even though this is a bit messy, it does have one advantage over the ATEM Studio HD, and you kind of showed it in your video - the ATEM mini allows your cameras to be outputting different formats to each other, whereas with the more expensive set-up, you have to make sure all your cameras match with their signal format.

[@AwesomePlayers]

Which sucks big time! Love the Mini.

[@erickvivas9417]

Hello Mate! Thank you for your video... Please tell me, how would you connect a Logitech brio 4k to the BlackMagic Mini Pro? Which adapters would you use?

[@aaronpk]

UPDATE! Blackmagic just announced a new product: the ATEM Mini Pro, which includes MULTIVIEW!! Pre-order it now: aaronpk.com/minipro

[@BBROPHOTO]

Literally came here to say the same comment! It looks so incredibly perfect now. What an amazing little device.

[@lukasEgg]

@@BBROPHOTO well it annoys me than you cannot output hdmi and multiview at the same time. That would have been sooo good.

[@DeltaWhiskeyBravo13579]

Very nice answer to getting multi view.

[@gerardobello1747]

Aaron thank you, this content is really helpful. Can you make a short video or tell me how to set up your BMD video assist to record your program? I tried but the video look like it was recorded in slow motion. Any suggestion? Thanks.

[@glongSJK]

Does the video and audio come through the USB out. I'd like to get audio mic plugged in camera to come with video through HDMI micro to atem. Then out to PC USB for zoom or Skype. Any advice for best flow. Thanks in advance.

[@Tomix098]

Hey Aaron, question - can you multiview on atem mini pro via hdmi out, and get Your image from single cameras via usb to a streaming software?

[@michalforysiak9219]

Great video as always👌👌.would you make video, what software, hardware you need to have replay options?

[@OAVT27]

Can i have the same setup for 4K recording from out from Sony alpha cameras?

[@nateshapley]

What size is the DC barrel jack for the multiviewer? I didn't see a link for that cable.

[@marcthiele]

I like your final conclusion ;)

[@ifn_media]

I simply use 4 LED monitors with pass throughs BUT if I needed to extend to further multiview, then your set up would be fine - I'd velcro the setup to the back of the monitor in question

[@joereyes8989]

If I already have Atem Mini and Video Card do I need capture card (eg. Elgato HD60 Pro) to use VMix on my Windows PC? Thanks!

[@pavel.suchkov]

Great vid as always, Aaron! We're working with 4 Hollyland video transmitters each of which has an extra HDMI output. So minus one device per channel :) Nice monitor too!

[@aaronpk]

Nice that's awesome! That's a great way to solve it too!

[@locoqueno]

Hi Pavel. Is latency an issue when working with the wireless transmitters? Which Hollyland model and cameras do you use?

[@pavel.suchkov]

@@locoqueno Hi, Pablo! We use Hollylands 300 and 400 (two of each), two Blackmagic Pocket Cinema Cameras 4K, Olympus OMD EM1 mk II and a Gopro 7 black. So far the latency has not been an issue, as the audio goes from the Zoom H5 either through one of the BMPCC4Ks, then there is no issue at all as both video and audio both come at the same time. Or the audio goes from the Zoom H5 to the Line In of the ATEM mini. But then we adjust the latency in the vMix (the software we use to broadcast)

[@EasyyokeFilms]

@@pavel.suchkov Can you please explain how you did this "Or the audio goes from the Zoom H5 to the Line In of the ATEM mini. But then we adjust the latency in the vMix"..... I am using OBS for live events and the audio comes straight from the sound console into the atem mini and I have been looking for a way to sync up the small latency of the Hollyland Mars 300 with the audio. Can you explain how you did this. I cannot pass audio straight to the camera.

[@totema4025]

hi, when i record my video i have to use ssd for save the files. I m looking for a method for connect the ssd ssd too in same time. i hope you will can my request. when i make my video i need to save on ssd but after i have to disconnect hhd for reconnnect it on pc for import files. how can i connect on same ssd mac and atem for record and after read the files? i tried to put a switch on ssd but it did run.

[@gerardobello1747]

For sure this is the best option to solve the multiview issue. Thanks!! Question!! I have the same BMD recorder. But not sure why, I don't know wish setting use. The codec on the recorder just look like if the is a resolution issue. Looks in slow motion and my camera is set to ProRes 1080 HQ. On the monitor look good and normal but the recording look bad. Any suggestion? Than you!!

[@medienluemmel2000]

Good stuff! Thx for sharing. Especially your resume i enjoyed a lot and i agree.

[@azelan59]

it work thank you ..I modified little bit put all in in one ABS case bag with 3mm panel plywood on the top ...problem HDMI out from atem not working well video flickering at the 5 inch feelworld monitor,...hdmi out from multviewer work great....

[@go2grow-dezvoltarepersonal467]

I want at list to have one view at a time to see what it records. But It doesn`t show up on on software. Do you have any idea why? Have you any video with the answer? tnx!

[@jerryalicea8897]

does a Ninja2 work as a recording unit with the atem mini ? Reason I ask is I did your hookup as you showed us and found a problem with sending the signal to the ninja. Very Frustrating !!!

[@fujonmedia]

Great stuff! Can you post a link to the USB to Barrel cable please?

[@johncrisoctaviano]

Is it possible to make a portrait orientation of Camera?

[@altarisproject9673]

how to pop up the multiview preview on external monitor?

[@alain99v6]

wouldn't be surprised if BM introduce a new version with multiview out at NAB 2020 or a single unit multiview with loops on each inputs

[@RobertoRaymon]

I need something similar. So I'm going to run multiple cameras into my Atem mini pro, then of course have an output to a monitor where I can view the cameras as I'm switching them, but THEN I also need an additional output to run to another computer in order to live stream. 🤔

[@opportunityknocks3088]

I appreciate the video and this guys out the box thinking, I have been in a lot of gigs and know this is required....But the pro is 500 something now, just save for that simple and clean set up

[@aaronpk]

Believe it or not, I made this before the Pro was announced! I definitely do not recommend doing this 😂

[@opportunityknocks3088]

@@aaronpk Bro, i realized that after the post...dont fault me lol

[@calebjarvis9585]

Is it possible to label the multi view on the monitor?

[@perspectivestudioscaribbea5899]

Because of my budget and the fact that i have already built a rig using the web presenter and my Atomos ninja2 in a gator case, I will do this setup when i purchase my Atem mini and the mess will be hidden in the case, i like the idea of recording my mix in prores. I'll do a video when I'm actually setting it up, thanks for sharing Aaron 👍

[@Gren4te]

Please just get the mini pro ;). It’ll save you a lot of headaches. Because you now have 5 extra devices that need power as well, a lot of extra cables and a lot of stuff that can break. Having just one point of contact for warranty stuff is so worth the small extra.

[@Creamybokeh]

Thanks for this! I’ve been trying to think of a more elegant solution than having 3 or 4 separate monitors for each input.. I imagine you could build or craft an enclosure for the splitter / multi view element that would tidy up those cords a bit. Still cheaper than buying the more expensive switcher.

[@aaronpk]

a bit cheaper, but definitely more limiting still. IMO the more expensive one is worth the price especially since it gives you an extra AUX output that you can use for things like feeding a projector in the room

[@Rrroarr]

@@aaronpk ooooor.....use another splitter on the output PGM :D

[@cameraguydbk]

Based on the4 other comments, I must be the only guy who didn't get this to work. I've tried 2 different multi view, the one listed with 2 different sets of 1-2 converters. Can't get multi view to work to save my soul. I guess I'll return everything and wait in the even longer line up for the Pro model. Great job on the video.

[@doggoTvs]

man... nice video ... I need help with something...my camera doesnt delivery 16:9 image ... is there any way for scale the camera and get rid of the two black bars on the side with the regular atem mini?

[@aaronpk]

Unfortunately not, but you might check the camera for a setting like that instead

[@robinmordasiewicz]

My new favourite KZbinr.

[@AudioForCreativeMedi]

Thanks for showing us.

[@pakiparler]

Quick question. After 30 mins most camera stop recoding then they need to shutter start again can you avoid that using atom mini pro iso?

[@aaronpk]

Yes, if you use the ATEM Mini Pro ISO to record instead of recording in your camera, then you won't be stuck with the 30 minute limit in the camera. One thing to look for though is to make sure your camera has clean HDMI out and also has a way to disable any power-saving options.

[@eventsunlimited2338]

you are a genius. love your videos.

[@banglakagaj3880]

Where can I get it?

[@HerbalFaces]

Thanks very helpful

[@RBSFILMSHD]

Sir Ji this product is not avilabel above amazon inside india. can you couriered this product inside our india. what in ple

[@YourStoryStudios]

Good to know it works!

[@bradleypisney]

Super super helpful!

[@louisgoutaudier6284]

Thanks for your great video! Can I ask you a question? I have two DSLRs, and I want to do a live KZbin Multicam. What do I need, on a tight budget, to do my live? I have already installed the OBS application, but hardware-wise, is the ATEM Mini enough as a device between my DSLR and my computer or do I need another device?

[@mhuff29]

This should work, the ATEM mini shows as a single webcam on your computer so in the OBS system you would drop down to it as an input.

[@mrmooor453]

Its nice work sir. Thanx

[@kabassa]

Great job!

[@Max70022]

that's an excellent review

[@ekainjulen6263]

Very nice!!!

[@DaniPerezFotografia]

Good job making the multiview as clean as possible BUT as you said and i think the same Atem Mini is not design to require multiview, for me to much messy

[@PuTeFabiO]

hello Aaron, if i have an atem mini connect via usb to my computer, and a elgato capture card receiving the hdmi out from the atem, can i assume i can mount on the obs a multiview with 2 cameras, assuming that elgato will receive the preview and usb will output the program, and if i have a 3rd camera conected and configured to pip, can i assume i can have 3 cameras showing at the same time on obs?

[@aaronpk]

That's a bit of a juggling act but I think it would work! It'd be quite a trick to manage all of that and keep track of what you're doing if you're switching between inputs though.

[@PuTeFabiO]

@@aaronpk yes i imagine it would be a little dificult to manage but could be a good workaround for some case cenarios

[@lyfestephens8850]

Dude I'm glad you did this video- Pro or not.. spending $250 compare to $1000 I don't mind the wires Lol.... Great video I'm about about the place my order on the parts now.... The only thing that I would do different which gonna cost me a pretty penny is wireless video transmitter I need 3 might be getting the Accsoon Cineeye ($250X3). Call it the day Thanks again

[@dan7872]

@ Aaron Parecki, somewhat unrelated but do you happen to know a ready-to-use 4x1 hdmi multi-viewer with *customizable* (windows size & position) display modes? Something that does not break the bank. I'm trying to hook up 3 or 4 PC HDMI outputs to it and send the result to a ultra-wide monitor. Or maybe another solution? Thanks.

[@aaronpk]

Pretty sure the only thing in your "not break the bank" price range is the Decimator DMON QUAD at $295. geni.us/GGlq9M8 However I think it only does 1920x1080 resolutions, not ultrawide. I've also seen some ultrawide monitors with that feature built in though.

[@dan7872]

Thanks. LG has some monitors like that but the number of modes are limited to the model and not customizable..

[@morsmediatv-undfilmprodukt3958]

Hi, does the Multiviewer support different framerates (25p , 50i , 30p) at the same time?

[@aaronpk]

Yes it does! Look closely at 6:49

[@JohnKagu]

Thanks for the video. This helps I have the pro line but as client turn to use the phone with better image today we need a product to setup at a non-broadcast rate. This helps a lot. PS if that mess of wires is to much for you you can send it over I will not mind having it. :-) Thanks I was considering using a Blackmagic Design MultiView 4 HD with Blackmagic Design Micro Converter BiDirectional SDI/HDMI/PSU given I have some Blackmagic Design Micro Converter HDMI to SDI already in my arsenal.

[@DualTasticToday]

I have the mini with 3 static cameras and the roaming canon 70d with the mars 300 and a 10 inch monitor with hdmi in and out. Works good.

[@suryagr8]

Is there any lag in audio/video signals? I hope Audio is synced with video (from HDMI and 3.5 mm mixer)

[@aaronpk]

HDMI sources always add a delay, but the audio jack on the ATEM does not have a delay, so the audio from the audio jack will be somewhat out of sync with the video from the HDMI ports. The trick is to either run the audio into a camera so that the camera brings them in sync, or add a delay on the audio input with an external device.

[@user-xs1rw4ph6n]

That's great! Thank you

[@msapessoa]

Very cool. Thank you.

[@StephenFinkNRP]

I would have loved if it had had a preview out like my old toaster. I know it can be set up for a preview out but that defeats the video assist.

[@MM-Privat]

How loud is the cooling-fan of this switcher? I have a Roland V-1HD and it is so loud that it is almost unusable....

[@Gren4te]

I don’t think there actually is one. Only a slight whine from the power supply which might be annoying if you are sensitive to high pitched sounds. The extreme has a fan, but I can only hear it at startup. Good way to check if it still works ;).

[@soundcolorstudio]

Great video!! Wanna ask if there is any delay of video from direct input to atem mini? Also any video out sync (audio n video) occurred? Thx!!

[@aaronpk]

There's only a couple frame delay in the video processing, but all the inputs stay in sync themselves and with the audio coming in from HDMI. If you have audio coming in from the 1/8" jacks you'll notice a slight delay in the video between that audio and the audio from the HDMI sources.

[@soundcolorstudio]

@@aaronpk thanks for telling!!

[@justinh9814]

Question.. why not just adjust the features of Picture-In-Picture?

[@damiencooper]

If I wouldn't want to switch angles and have them streamed all at the same time I skip the splitters and go directly from the multiviewer into the Atem mini, right?

[@aaronpk]

Yeah you could do that! That little multi viewer device will output a video signal you can input into the ATEM Mini if you want to actually stream multiple video feeds on the screen at the same time

[@damiencooper]

@@aaronpk great, that's all I need! Thanks ;)

[@PaulwDonovan]

Hi. Thx for informative video. A good DIY person would look for a way to make it all fit in a box with the monitor (or a pelican-like case) and have all the plugs fitted in the side. After I buy my ATEM mini I’ll see about adding this setup. Thx.

[@stevenfortemediallc]

Thanks, without the monitor it seems like it’s less than a $100 solution which isn’t bad. But Amazon has the pro for 600-700 usually. Thanks for the video tho I didn’t realize that there was a multivitamin splitter. 👍🏾

[@al4video]

I bought one of these and I put it back in the box. Multiview is an absolute must in any situation.. It's too bad because i love the build quality of this device. I set this thing aside and purchased the Atomos Shogun 7 Switching recorder. Much simpler.

[@aaronpk]

Too bad! At least it will go to someone who will appreciate it!

[@al4video]

@@aaronpk Yeah, I think it will fit nicely for a lot of people. The fact that it takes any kind of input is unheard of at that price.

[@hacklabdesign]

Bravo on this build. 351.92 is amazon cart total incld. the lcd monitor being 169 which should not be counted . THaNKYOU

[@Vidman1981]

Hi Aaron, I have the Atem Mini. I'm trying to split the HDMI Out to a program monitor as well as a potential feed out to, say a projector or separate presentation monitor. I have a Powered (by mini USB) signal splitter, the one you recommended with your link, but it doesn't seem to be actually doing anything. both signals go black (not even a 'no signal') notification on the monitors. I know the HDMI Splitter works, because I used it on my laptop to give me a duplicate extended screen to those same monitors and it worked just fine. I'm wondering what I may be doing wrong, or if the Splitter I have is somehow not compatible or if perhaps the ATEM Program out has some sort of build it measures to not allow this to work? Thanks in advance for your advice, keep making these videos.

[@aaronpk]

I've noticed this as well! I don't really understand why, but for some reason the ATEM Mini output doesn't work with some splitters. What I've been doing is using small monitors that have an HDMI output and running the larger screen from the monitor out instead of a splitter

[@Vidman1981]

@@aaronpk what monitors do you recommend? I am a little limited with my set up. I have put my Atem in a case with some additional gear for a quick set up on remote shoots

[@mahanimrod8513]

Aaron Parecki Hi Aaron, I’m having a problem with Atem Mini output. Its shows no signal/signal lost in my monitor (for preview). I tried using splitter between the Atem mini and Monitor which some people recommend in the BMD forum, still doesn’t work. Do you have suggestion to solve this? Thanks

[@BrodyRadioShow]

Do I need to buy an adapter for each camera like the Camlink or does the Atem Mini have encoders built-in? Thanks!

[@aaronpk]

The Mini has HDMI inputs so you don't need any other adapters!

[@BrodyRadioShow]

@@aaronpk thank you!

[@qramo]

I tried this. My multiview works well with camera source but PC screen source is turn black screen...hmm

[@itsoverat6000]

Thank you very much!

[@persikii8020]

Can I use any PC monitor my is (Dell 49") to connect or do I need to use Blackmagic Design Video Assist HDMI/6G-SDI Recorder?

[@aaronpk]

Not sure exactly what you're asking about since this video was about using a specific monitor that supports 4-up multiview itself. But generally you should be able to connect a PC monitor to the ATEM HDMI output. (Some monitors don't support 30fps signals so if you're not seeing anything try changing your ATEM frame rate to 60fps)

[@persikii8020]

@@aaronpk That's actually was my question. Thank you very much.

[@persikii8020]

@@aaronpk I bought the cables for the connection. Unfortunately all the HDMI are all wrong the only thing that came right muti-viewer switcher. Can you please update if possible link to Amazon where I can buy the hdmi to connect to ATEM, the hdmi adapter with usb.

[@sonicultura]

If I want to get a camera for my Atem Mini under 500 USD with good picture quality for livestreaming what's your suggestion? Thanks!

[@aaronpk]

At that price I'm a big fan of the Lumix G7, it comes with a kit lens for $497! That's what I was using on today's livestream as well!

[@sonicultura]

@@aaronpk I was looking at the Sony A5100 is the Lumix better would you say? Thanks for taking your time and making them greats videos for us!

[@slipstream4572]

Latency?

[@MeetupvideoUK]

Good solution Aaron! But, 3-4 months ago people was complaining about the lack of multiview in Mini. Now, after the cheapest solution, they don’t need it 😂😂😂 Easy.

[@ronakpgosar8387]

Will it support 4 5D mark 4 camera input for the multi view ? As in the description it doesn't mention about the the camera input

[@aaronpk]

The multiviewer handled every camera I threw at it, but I don't have any Canon cameras so I wasn't able to test. I suspect it would work fine though!

[@ronakpgosar8387]

@@aaronpk okay thanks

[@Philip8888888]

I'm so cheap that I exactly priced this set-up but in the end decided that the cost/hassle wasn't worth it and decided I could live without multiview.

[@LucaDiBattistaillustrator]

Hi Aaron, could I plug cameras directly in the Atem mini without going through the multiview?

[@aaronpk]

You certainly can, but then you won't be able to get multiview!

[@LucaDiBattistaillustrator]

​@@aaronpk Hi Aaron, other question Atem mini works only like a switcher and I need a capture card in add? Thank you :)

[@pardeepasr2085]

Sir, make a video, how to connect live Mini Solo to connect the live u Solo how to link to the laptop.

[@vangelaobli]

wow this is a great workaround! but with that cost plus the hassle, I just want to sell my mini and jump to mini pro. that is, if I come to a point that I could not live without multiview

[@Darock80]

I'm thinking about making my atem mini as a "suped-up" web presenter and using my atem production 4k studio as my primary switcher. What are your thoughts?

[@aaronpk]

Yes! Obviously the Mini can't do 4K, but that's fine for streaming. You could use the Mini as an easy way to switch between your main program feed from the big switcher and fade-to-black, or putting up a start/end screen. It also has some great audio tools in it (check out my other videos!) which means you can boost the audio on the stream but not affect your main program. You could also keep a persistent corner logo overlay on the mini and not have it burned in to the recording you're making from the big switcher. Lots of possibilities! And at this price, it's almost a no-brainer to get it!

[@MFCtvElCanaldelasFamilias]

Hello. How were you able to get all four inputs into a screen? Even if the tv monitor had 4 hdmi inputs, how does the screen split into 4?

[@aaronpk]

That's what the Multiviewer device does! That's the box with the 5 HDMI ports that I show at the beginning.

[@MFCtvElCanaldelasFamilias]

@@aaronpk Thanks!

[@Adr805]

you don't loose the hdmi quality if you split it into two?

[@AwesomePlayers]

No. Digital.

[@GuitarSundayChannel]

Can you show how to connect one/multiple gopros to the atem mini?

[@aaronpk]

You just need a micro HDMI to HDMI cable and it'll work. However, the gorpro HDMI output is significantly delayed, so it was pretty much unusable in my experience. Maybe if you had only gopros the delays would sync up, but I'm not even confident about that.

[@josephpodcast]

Hi. Help, help, help, help... I have a monitor with SDI input and output. How can I use it with an Aten MiNI HDMI?

[@aaronpk]

Check this out, it converts HDMI to SDI and the other way around! geni.us/2jwmg