Mustang Auto to manual swap ECU tune changes

[@jacobn7597]

Thank you this was helpful!

[@saintdead3043]

Does he have a parts list

[@forcefedhatch]

@@saintdead3043 parts lost is in my auto to manual swap videos, mainly the cost video that starts it off.

[@jacobn7597]

would you be able to post what tuner you used? A link would be awesome

[@forcefedhatch]

The tuner itself is the SCT X4 tuner, and the software is from lasota racing. It’s the SCT pro racer software.

[@SébastienLemay-x4m]

After your swap did you have some engine stall problem? This program may be solve it? Mine stall every stop sign when i put clutch pedal at floor when i ride

[@forcefedhatch]

@@SébastienLemay-x4m sounds like you need to do a base idle reset. I would follow fords recommendations on doing a base idle reset so the IAC use is set properly as well.

[@SébastienLemay-x4m]

Already did it

[@forcefedhatch]

@@SébastienLemay-x4m I would say maybe look at the TPS as well, it could be the dashpot settings in the tune but I ran mine without the IAC plugged in and didn’t realize it. I’d say you can check those next.

[@jae7629]

Did you have to purchase the Sct pro racer software?

[@forcefedhatch]

Yes I do have the Proracer software.

[@tonyvl9528]

Or I’m not sure if I have to use device updater?

[@forcefedhatch]

I would use the updater, sucks because you lose quite a few EPA freedoms we used to have but mine wouldn’t load new tunes till i updated sadly..

[@edyramirez9683]

I have a manual ecu and the steering wheel with the key would I be able to plug it in and run it like that ?

[@edyramirez9683]

I’m doing the swap myself I need help guys thank you ❤️

[@forcefedhatch]

Maybe if the VATS is disabled.. if not you may have to just have it tuned for it.

[@edyramirez9683]

Any idea how to disable vats or should I just program it like u brother ?

[@jacksontbanda]

If the ecu, key, key cylinder, pats transceiver, and gauge cluster are all from the same car, then you do not need any sort of tune because they were all programmed together

[@jacobn7597]

wouldn't it be cheaper to get a manual ecu off ebay? I am seeing the ecu about $350 on ebay for my car

[@forcefedhatch]

It could, but you would still need to have the anti theft disabled and a tune depending on what modifications you have done.. I already have the software, so this worked for me

[@jacobn7597]

That makes sense . Thanks for the quick replies!@@forcefedhatch

[@forcefedhatch]

@@jacobn7597 no problem!