My Gun Isn't Working! What Should I Do?

Рет қаралды 4,149

Күн бұрын

Пікірлер: 59

@M1911jln 2 ай бұрын

I suggest that you number each magazine. If you are getting failures, the numbers on the magazine will help you identify if the failures are specific to a particular magazine (in which case, it is likely that that particular magazine is the problem) or if they occur with all magazines (in which case, it is probably not a magazine issue).

@LangdonTactical 2 ай бұрын

Great suggestion!

@GaryPatterson-c3h 2 ай бұрын

Good stuff y’all.. we appreciate you.!

@Lizrd46 2 ай бұрын

My Berettas will devour all ammo I've used throughout the years without a hitch. I can also say that about my Hellcat. Way back I've tried the ole lets load five different brands of ammo and varying bullet weights in one mag and zero failures.

@JaysonChapman-t5k 2 ай бұрын

Excellent information. I learned something. Thanks

@chipkormas2840 2 ай бұрын

Not a problem with my LTT PX4. It eats everything without issue ,,,,with regularly maintenance

@brianphelps6661 2 ай бұрын

Can’t beat a stock Glock with factory mags. Not the best but it will go bang nearly 100%

@jason3211 2 ай бұрын

Any suggestions on lite strikes?. 92x RDO , It does not matter if im using the factory #16 D spring or 14# hammer spring ,i even went up to #17 same random lite strikes, I replaced the firing pin, triple checked the firing pin cavity, replaced the firing pin block lever, new factory trigger bar , sent it to beretta for warranty and still does it. Next going to replace the firing pin block , after that i just dont know. Guess a new slide. Earnest commented the firing pin block might not be getting out of the way fast enough, which makes sense because not all the lite strikes are the same detent on the primer , some barley have a mark others have obviously hit harder, this is frustrating as heck , also thought of getting the Wilson combat deluxe hammer, says it improves primer ignition with the lighter hammer spring, #14 is what i like to use. Also Earnest assured me it's not the Ammo, he said S&B , speer/CCI brass case, and Magtech should fire reliably with the 14# Hammer, and as I stated earlier I have tried 17# still has same issue. UPDATE! The polymer Hammer spring cap was garbage! This 92X from the factory came with the Flush hammer spring cap, after a viewer suggested it might be that guess what it was. Inside was distorted,along with the pin hole elongated vertically, matching up the new aluminum cap with polymer the Aluminum one fits a bit tighter,Beretta warranty work should have found this, anyway put in Factory aluminum lanyard hammer spring cap and no longer an issue. Boy did I learn a hard lesson. Triple check everything myself.

@TheMakeReadyRanch 2 ай бұрын

Does the gun have the polymer hammer spring cap? Might want to check that out. I had a similar issue on a LTT, and the polymer in the spring pocket was deformed, almost like it was too soft. The retaining pin hole had elongated as well. Weirdest thing I ever saw. Replaced it with the aluminum cap, which is still available.

@jason3211 2 ай бұрын

Yes it does have the polymer end cap. It does not look deformed but I will definitely replace it with an aluminum one, that is a very good point thank you for the help.

@tstststs 2 ай бұрын

This is a long shot but try replacing the trigger bar spring. I had a problem recently on a 92FS where the trigger bar spring wasn't strong enough and the trigger bar was not pushed all the way up during the trigger pull, causing it to fall on half cock instead. Try pulling the trigger while pressing up on the trigger bar and see if that seems to fix the issue.

@jason3211 2 ай бұрын

I just ordered a wolff trigger bar spring ,👍 and have an aluminum lanyard hammer spring cap on the way. @@tstststs

@jason3211 2 ай бұрын

@@TheMakeReadyRanch Thank you very much for the advice, the polymer cap was garbage, distorted inside,along with the pin hole elongated vertically compared to the factory aluminum cap. I sure learned a lesson on this. Triple check everything!

@TheMakeReadyRanch 2 ай бұрын

Been shooting 92s in competition for 20 years, and the newer TN made stuff is much less reliable and durable than the guns made in MD.

@kennethbaker5223 2 ай бұрын

I’ve been shooting 92’s for longer, and have had the opposite experience. Funny how that works.

@TheMakeReadyRanch 2 ай бұрын

@@kennethbaker5223indeed. Further proof that you can't rely on internet anecdotes. You gotta experience and learn for yourself.

@J.Varney 2 ай бұрын

Yeah bought a new 92 last month and it shoots low at 15 yards like really low. Like 2 feet low even from a rest. They offered no solution but an adjustable rear sight. That turd got dumped at a loss. My 2005 inox from Italy is my only 92 now but she runs.

@dannychio9814 2 ай бұрын

JEEEEZ! ALOTA TROLLS ON HERE. If you all love your Glocks, go be happy. I'm glad you found a firearm you connect with. I've been shooting Beretta 92's for 32+ years, 6 of those as a service weapon. I've been shooting PX4 for @ 13 years. 0 misfires-Gospel truth! If my life depends on it, you know it's gonna be a Beretta.

@Duhtonyle 2 ай бұрын

@@dannychio9814 not trolling, I’ve seen 7 beretta 92s break. You prob have less than 1000 rounds on your berretas

@dannychio9814 2 ай бұрын

@Duhtonyle Yea ok. Sure. Obviously critcal reading isn't your forte.

@Duhtonyle 2 ай бұрын

@@dannychio9814 hopefully your Berretas don’t break after 500 rounds 😊

@bernoodler5749 2 ай бұрын

@dannychio9814 beretta quality is not what it once was. Many of the newer produced berettas have issues with longevity for those who shoot ofter (1k+ rounds a month)

@kennethbaker5223 2 ай бұрын

@@DuhtonyleI’ve seen every type of firearm break. Your point?

@Philmoscowitz 2 ай бұрын

What's wrong with ammo manufactured during Covid?

@TheMakeReadyRanch 2 ай бұрын

Everything.

@onegudman7 2 ай бұрын

Poor QC as manufacturers were rushing to keep up with demand.

@Philmoscowitz 2 ай бұрын

@@onegudman7 Thanks. So is it all ammo manufactured in 2020, or is it only some brands?

@onegudman7 2 ай бұрын

@@Philmoscowitz great question! I don't know, I mostly reload my own but have always had good luck with Blazer.

@Philmoscowitz 2 ай бұрын

@@onegudman7 I like Blazer, too. Also Fiocchi and Magtech. For range shooting anyway. I wish they would put the date of manufacture on the boxes so we can tell if we're getting a Covid batch or not.

@BLACKWOLF-1911 2 ай бұрын

Send it to nighthawk and brace yourself for the total!

@armageddonready4071 2 ай бұрын

In America, if it’s broke, throw it away and buy a new one. MERICA

@SnowDeemy 2 ай бұрын

🌹🌹🌹🌹

@kevos823 2 ай бұрын

"Make sure your gun is clean and ready to go" then you watch a video with Ernest its dirty i have 17 million rounds through it haven't cleaned it, in broke in half but was still working hahaha

@Duhtonyle 2 ай бұрын

PX4 is $1500 and it barely works

@LangdonTactical 2 ай бұрын

Can you elaborate?

@Duhtonyle 2 ай бұрын

@@LangdonTactical My buddy's PX4 started choking and the RMA experience was less than stellar. LTT told him they cant reproduce it so they can't fix it even though he has videos of it malfunctioning and on top of that charged him money for the RMA. So needless to say, he's pissed with a $1500 paperweight and a ransom fee to get his gun back.

@J.Huff76 2 ай бұрын

@@Duhtonyle LMAO! cool story bro. my buddy's wife sister's uncle twice removed said something about a gun to . LTT didnt get where they are at by selling paper weights. Why is it all ways the garbage glock owners that say stuff like this?

@Duhtonyle 2 ай бұрын

@@J.Huff76 reality hurts to people who don’t shoot their guns 🥱🥱

@bernoodler5749 2 ай бұрын

@J.Huff76 you are very angry about a personal preference and person's experience. Why is that? Why do you feel a need to defend a company and assume the customer is in the wrong?