My NEW Custom DJ Booth Setup for 2020 |

[@DJRickWeb]

Everything in the booth Pioneer s9 amzn.to/2GX4jrZ Rane 12 amzn.to/386LOx2 Furman Power Strip amzn.to/2GXnAJB Amazon Powered USB Hub amzn.to/2UsqLRv Hosa xlr cables amzn.to/31t08NX A Lot of Damn Wood

[@1LovePT]

sticker light link? this looks great dude

[@DJRickWeb]

Dont have a link. @stickerlight on Instagram there not a big company

[@1LovePT]

@@DJRickWeb thanks bro

[@redpillguru111]

The whole thing is legit! Nice job brother.

[@nesentertainments]

Looks fantastic but for me as a single op in new Jersey no way to transport and some venues with multiple rooms can put you on the second floor. Otherwise I love it especially the turntable set up.

[@BayardoRugama]

Booth is dope but, I’m more impressed with your flight case... man that looks so clean. Should have filmed the making of the flight case.

[@DJRickWeb]

Time crunch. Made the flight case in 12 hours straight.

[@asole100]

Mention flight case, and Dj Barr will show up. 🙉 Loves his flight cases. 😂

[@BEMS4Life]

@@DJRickWeb Please document/video the next one you do. would love to see the process.

[@djsupetown9499]

holly crap that is bad a$$$ wow and your equipment talk about top of the line. you have come a long way since the early videos. i remember one of you first club gigs when you were up stairs and the school tent prom video. congrats that is a beautiful booth you have created very impressed, keep on growing. proud to see you doing what you love and having success with it all. life don't get any better that this - keep grinding

[@ClevelandTerry]

This is a great video pal. I’ve been contemplating making one for my studio for a few weeks now. This gave me some ideas.

[@thirtyfivealive]

Super impressed brother, that’s really awesome! Everything is so custom and looks super professional. 🙌🏼

[@djfishscottfisher108]

All you need now is custom vinyl. Looks really clean.

[@DJRickWeb]

12 inch skins you listening to this guy!?!? Lol jk yeah I need to get on that

[@mickeyj71hp]

It looks great Rick. I sure wouldn’t want to move it though. Lol.

[@chrishodges2246]

Awww Maaan that joint is DOPE, U really put some work in on that set up, GREAT JOB MAN!!!

[@hillaryshingie]

Love your work 👏👏👏👏 learning a lot all the way from Zimbabwe, Africa.

[@khalidasadullah882]

Nice set up....real clean look...I love how you max- out storage space to transport stuff under the stand ..real dope idea.

[@jayritter604]

Sick! Building a recording room and looking to build something similar. This gives me ideas. Rane is the ONLY way to go!

[@moflexmusicinc.6060]

Sick booth brother

[@djjesse1294]

What's up Rick!!! Nice & clean set up. Very professional.

[@vdoscanr]

Looks really dope....thx for sharing

[@1CrazyDJ4U]

One hell of a job on the booth. Great work.

[@JibaritoC]

I Love it... So cool.. great work 👍🏽 will be making my own custom one.. soon. Thanks for the video.

[@MsDJDaze]

That table is so freakin dope. I have the Rane 12s with a Rane 72. I would love that table, but wouldn’t take it to gigs. Would just keep it at home with my equipment.

[@bxclusiv]

Awesome job man. I’m impress

[@djviewer]

Great job man! Very impressed with your carpentry skills!😉👍🏼

[@djnoy842]

Congrats!

[@nasby5093]

As much as I LOOOOOOVE this, there is no way, Im hiring a second person to come do 5 minutes worth of work before and after an event. I did a hoerboard T Stand and built a custom road case and then being in Califrnia everything is in the friggin dirt at rustic venues. Spending tons of time driving 6 hours to check out each and every new venue isn't happening but I defintely applaud your set up! I love what you created its absolutely gorgeous. I also am on the RANE12s and I use the 72 mixer instead of the S9 cause I wanted 2 mics. Gorgeous set up man! I love it and Id want one for my man cave! LOL

[@DJRickWeb]

An assistant does way more than 5 minutes of work. Mixing music during cocktail and dinner. Load in load out. Setup teardown etc. Backup when I have to piss

[@dennisnbrown]

Real nice my friend. Great job

[@asole100]

Thought he legit made a regular table at first. 😂😭😭 This table is actually cool. 👀🙉

[@staffordalvi1929]

That's dope AF!!🔥🔥

[@luisacevedo324]

Nice idea Rick... Good luck in 2020...

[@djsin5254]

You should skin the twelves and s9 in wood grain!

[@djtimmysnyder4882]

Can I see a shot of the bottom. How are the legs attached? Thanks. Nice Work.

[@DJRickWeb]

The legs are attached inside to the walls of the the top. Pause the video on some of the inside shots.

[@briank3799]

That cup holder though!

[@christopherelson5119]

You need to install a little breather hole in the top of the road case. It'll definitely make it easier to get the lid off and on.

[@djcruz99]

I wouldn't move that around :) looks dope!!

[@milesdavis258]

Dude this incredible. Super well done, much respect to your skills

[@datboyfilmz1826]

I like that dj set up but kinda big to transport in my car starting out nice job well thought out for the subs and storage under neath the set up over a 5star set up great job man

[@DJRickWeb]

Absolutely. It's not car friendly at all

[@3d_Ink_Oficial]

Dude, you’re a genius It looks amazing the table and the travel case Great job

[@allengallegos7238]

Good job Rick!!!🎧

[@stewardsproductions]

DOPE!

[@PapaRay922]

Excellent forethought and craftsmanship.

[@DJAnthonyAlvarez]

I love my S9! Use them with my technics 1200!

[@RamPageProX2024]

that light on the laptop looks sick

[@djtwaynesworld2568]

Where can I get a sticker light?

[@pushmotivation-__asher1335]

Great job on the table.

[@GTTrains]

Pretty cool! For your XLR and power coming down the leg, I would suggest making a patch bay instead of the hole you have at the bottom, no? Nice XLR patch and PowerCon (Blue) In would do the trick. That way you wouldn’t even have to open the top for the power because you could leave everything on and when you twist in the PowerCon, BOOM!, power!

[@DJRickWeb]

That would add 3 more connections I would have to make

[@GTTrains]

DJ Rick Web yea. Pigtail cables would do the trick, to go from booth to your rack. But so much more simple than having to feed cables every time and remove your lid each time. Just preference obviously. Pretty Cool set up either way. The finished wood looks nice

[@DJRickWeb]

@@GTTrains I dont feed the cables just roll the slack and put the in the road case

[@GTTrains]

DJ Rick Web 👍🏻 gotcha. Comes down to preference at the end of the day.

[@musicman257]

Damn wish you were my neighbor I have you build me one Nice Job Cant wait to see what equipment your driving that with

[@djodmaticca.8384]

At 10:55 "feel the air coming out" " feels so good"....and you said it has gas pipe 💨? Lol That is Awsome good job Rick you should get a patent for it.

[@DjReeceVarnell]

I have the same style setup with my hoerboard rig, takes two people to lift off the case top ! very bulky but very quick to setup.

[@djmikebee5596]

Hi DJ Rick Web, I would just like to know the top of your console is made of what kind of material? 1/2 '' plywood? and the sides in pine plank? The number of your brown dye it is super beautiful, Thank you and congratulations super nice work !!! Bye, friend from Québec, Canada.

[@chrismanikkam6444]

Looks great Dj Webb. I would have built the legs to be removable, so it's like a flightcase with a top cover. Great work, keep on rocking it!!😁

[@BEMS4Life]

I'd include some spring clips to the lid, it will still be easy to remove but won't pop off when you lift the flight case off it. Really nice clean design that's just been stolen! Cheers! Maybe get the crowd facing vertical panel cnc'd with your DJ name, maybe get a white frosted insert cnc'd to match, backlight it, would look sick!

[@drummerdude8323]

Overall a great build. Job well done. The two things that stood out to me: If you would have moved your power strip/conditioner to the right hand side of the table, it would have been easier to flip the switch by removing your cup holder, versus lifting the entire table top, this adding wear and tear. Also, as clean as that is (and it’s very clean, very sharp) tie up those 3 cables on your laptop stand. Weather with velcro around the pole or some kind of attachment on the bottom of your wooden stand for it. Small detail, but it will make a big difference.

[@DJRickWeb]

I have to pop the top off for the sticker light controller too so no win there. I am adding a clip to the laptop stand as the wires need to come off to remove the stand for transport

[@drummerdude8323]

DJ Rick Web you wouldn’t have to do that for the sticker light if you used a usb extension cable so your cord would reach and you just kept it pulled out of the hole, the same way you do your xlrs in the leg. Same with your laptop charger etc. just keep them pulled through the hole at all times. Mount the controller for your light sticker to the underside of the laptop stand. You’d have all 3 cables right there ran through your hole, all you have to do is plug them in, and you will never need to lift the whole top again. Just trying to help. I’ve enjoyed your channel for a couple years!

[@DJRickWeb]

@@drummerdude8323 not a bad idea on the sticker light controller. I'll look into it

[@drummerdude8323]

@D.jrickweb oh?

[@DJRickWeb]

Thats a spam account

[@DJNateNYC]

Very innovative, well built, great job

[@cameronjones3982]

You did an amazing job! Look great!

[@djrickweb_]

Thanks for your feedback Congratulations 🎁 I got some Dj gear for you

[@RoyalSingleton]

Damn I want one!!!!

[@bradstoll1991]

i really like this this is really clean

[@dja-myx2781]

Really sweet bro !!! Well done.

[@kenwa6180]

Very smart storage hack dude

[@ajtorres3865]

i find it not functional if you have to have another person all the time but dont get me wrong it is a great looking table love it i dont mond lugging my flight cases with my mixer and turntables to an event but love how clean that looks tho

[@DJILLEE]

I like how this looks! I'm weird about my legs being seen when I dj though lol. I dance around too much.

[@tobi2734]

Ha, Me Too Man. I Want Too Be A DJ And A BBALL Player Too I Cant Decide

[@alfiekennedy1657]

@@tobi2734 just get a black table cloth works perfectly

[@3d_Ink_Oficial]

Same here But now I bought a ProX- XS ZtableBL on amazon Not gonna lie That thing is pretty dope and practical to move and assemble

[@DonalRomano]

Add a smart plug 😉 power it off and on via Google/Amazon! Tell Jarvis to drop your needle! It works for me

[@TheLjdevlin86]

Awesome video and decent table...maybe a video explaining how videographer connect to mixer? One love

[@DJRickWeb]

You just need an aux out for them. Typically rca or 1/4inch Jack's work. I use a 12 channel mixer that let's me select mics or music or both so the videographer can get exactly what they are looking for

[@TheLjdevlin86]

DJ Rick Web great info. Thanks.

[@femikevinmurphy8070]

Pretty dope! Good job.

[@hankshepherd5834]

Very clever, great job!

[@jimdunlop4427]

Whew...nice job!

[@aqgaqg6777]

Its dope! But when i saw the way the travel case, came to me y dont you make that travel case ur booth! Customize the top to fit exactly how the booth fits the entire equipment and cover it up

[@Vincent-Vega24]

Dude, its SICK!!!!! Great Job!!!! I build all my stuff myself also, i cant stand giving people all my hard earned money!!!!!

[@kevinmagrini4771]

Awesome build!! I have the exact same setup, and I plan on building something very similar. Great work, it looks awesome!!!

[@djdarkbreeze7206]

Dope ..... simply dope....... mic dropped

[@latinobazaar]

The plans? I need to build one by September.

[@DJRickWeb]

Did have plans. Have a sketch on a piece of paper and built it.

[@pushmotivation-__asher1335]

Rane 12, hells yeah

[@fehmisolmaz805]

Looks great. The 3/4 pine might warp

[@DJRickWeb]

Potentially. And actually it's only a 1/2" top.

[@judycek]

wow, good job man !!

[@isaiahfurrow7414]

I want to someday have a flush top console like this, but just for at home... Thanks for the video, and the cupholder idea....where'd the cup holder come from?

[@DJRickWeb]

Amazon. Just search cup holder insert

[@djdannybhtx]

Nice work bro!!

[@chadnliz2k11]

I have the Rane 12s and 72 but quickly bought the Denon sc5000 decks to use with 72 for mobile work. Too much to lug the 12s around for me. Nice job

[@thepoppychannel798]

He has an editor!!

[@Dj2wise1]

i love your enthusiasm for your own design, awesome work on that. But is just looks way to heavy and bulky to transport. You should really consider making the legs collapsible

[@DJRickWeb]

Did you see the giant flight case?

[@Ninja_man_son]

Super clean but big and heavy

[@djrickweb_]

Thanks for your feedback Congratulations 🎁 I got some Dj gear for you

[@hot4futureyears2come]

Oh, and congrats on the new hottness

[@djbabyT15]

Great video.

[@djbabyT15]

@D.jrickweb Forreal? What did I win?

[@DJRickWeb]

No

[@revolutionradiocanada]

Dude! Great job. If I owned a club, I'd get you to construct the DJ Booth...

[@soundtasticevents3602]

Yes yes well done love it

[@skeennah1927]

when Rick put all his weight on the table............................................phew!!!

[@markscott4297]

I love the new Booth

[@djjohnnyhaines]

Have you thought about running power con connector and xlr connectors to that leg similar to what you did with your sz?

[@DJRickWeb]

Well that was the original plan till my friend Nick Spinelli showed me his wire setup. Having just the long wires coming out means one less connection to plug in.

[@RadINation]

I am wanting to do a similar build, but is will be multi function I can either use it to DJ or take it with me as FOH for the band.

[@delrico8788]

Mann that’s Dope ✊🏾

[@TeeBizz]

Nice!!!! Way 2 Go Young Man!!!!

[@CRAMvidz]

Question: what parts did you use to make your laptop?

[@eugenedickie6975]

Hey Bro Whats the best dj pools what do you use?

[@DJRickWeb]

Direct music services

[@markseymour8767]

Awwwwsome! But the mega mega MEGA thing I need to know....where the hell did you get the lit laptop decal? It's bootiful!

[@DJRickWeb]

Sticker light.

[@antonkramarenko5339]

Super neat build!!! Please advise how are you handling the bass feedback into the turntables? Have you tried playing vinyl records on it? Im having a big issue playing vinyl form my personal build and it causes huge feedback, sometimes having a needle skip. Thank you

[@DJRickWeb]

I use rane 12s. No needles

[@joshuaculross1387]

Few ideas for you, add a fold up handle to the road case on the inside of the base so it could be used as a dolly when moving gear inside possibly and another is to add a switch onto the outside of the case so you don’t have to open it up every time you use it

[@DjGCue71]

That shit right there Rick... IS DOPE AF! But ur right, it comes with a lot of limitations. I been looking to build my own. But i want to make mine to fit 2 TT & a mixer and a ddj-sz2

[@djrickweb_]

Thanks for your feedback Congratulations 🎁 I got some Dj gear for you

[@Earthcitizen4609]

Loved the intro funny excited kid

[@patrickjrusaw]

Suggestion make an access cut out over the power switch and hide it with a business card holder removable tray

[@THEFUNKTIONHOUSE]

Looks awesome!! Nice Job!

[@cmel7284]

Flight case is dope. Would really appreciate a video on how you made it!

[@djrickweb_]

Thanks for your feedback Congratulations 🎁 I got some Dj gear for you

[@DJMikeLoverSmitty]

Do you keep your gear in the table when transport?

[@DJRickWeb]

Yes

[@tyree86]

This is fire!! I would pay for something like this✊🏾

[@DJRickWeb]

You be paying a lot lol

[@wez130]

What wood did you use for the top? I like it.

[@cfwproductions]

That is nice!!! Though I would say if you modify it, make the the legs unscrewable!

[@mysique96]

Keep up the good work and keep doing what you are doing! Question, Are you going to Mobile Beat this year?

[@DJRickWeb]

Nope

[@carlitosadrian123]

Cool Dj both, where did u get that loptop stiker from? I want get one

[@DJRickWeb]

Sticker light on Instagram