My New Favorite Cinewhoop Frame - Speedybee Bee35

Speedybee Bee35 Frame: bit.ly/3rG56bs
__________________________________________________________________________
Support the channel by clicking these affiliate links when purchasing parts at these sites!
RDQ - www.racedayquads.com?aff=58
GetFPV - bit.ly/3RroJf8 (5% off Coupon - 0KC6D3YB02RN)
Banggood - www.banggood.com/custlink/v3G...
BetaFPV - bit.ly/3E07NbW
GEPRC - geprc.com/?ref=iJ5Pz1Je
Insta360 - www.insta360.com/sal/one_rs?i...
__________________________________________________________________________
Just getting into FPV?
This kit includes everything you need to get started!
bit.ly/3Denags
Frames
5”: RDQ Sourceone V3: bit.ly/3vCnPDC
5”: iFlight XL5: bit.ly/3wfgwTr
3”: Shendrone Squirt V2: bit.ly/3bu3zNQ
2.5”: Betafpv Pavo25: bit.ly/3Nhmet7
Flight Controllers
Mamba F7 MK4 Stack: bit.ly/3zUDPU9
Speedybee F405 V3 Stack - bit.ly/3L4SpMJ
26x26 (Whoop) iFlight Beast AIO: bit.ly/3oQ8KdR
Motors
Xilo Stealth Motors - bit.ly/3x7se2o
Emax ECO II Motors: bit.ly/34QovLv
HGLRC 3600kv Motors: bit.ly/3SnakRY
Digital DJI System
DJI FPV Goggles V2: bit.ly/3qfTEzr
Caddx Polar Vista: bit.ly/3tsqTSp
Runcam Link Pheonix: bit.ly/3eBGGJp
TX/RX
TBS Ethix Mambo: bit.ly/3L2kXGx
TBS Crossfire: bit.ly/3qnUKbZ
Batteries:
6s Tattu 1050: bit.ly/3ztaJJZ
6s GNB 1100: www.banggood.com/custlink/G33...
4s CNHL 650: bit.ly/3zUOFti
4s BetaFPV 750: bit.ly/3Sq8MXq
Recommended Budget Gear:
Controller - www.banggood.com/custlink/vKD...
Goggles - www.banggood.com/custlink/GKK...
Other Equipment:
Torvol Backpack: bit.ly/3zU9G7j
Electric Multi-tool: www.banggood.com/custlink/GDK...
Naked GoPro Hero 8 Case & BEC: bit.ly/3yuWjI5
DJI Air 2 S: bit.ly/3QERAfJ
GoPro Hero 9: amzn.to/349z9Ju
GoPro Hero 10: amzn.to/3ILPAyC
Sony A7iii: amzn.to/3QvV82L
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!

[@julianhummel6118]

A full build tutorial with the O3 air Unit would be awesome!

[@zoeconner11]

I'm hopping caddx air unit will fit

[@rainbowrunner1136]

amazing, in morning i was looking for this frame. And now ur video is here. wow!

[@dominickeen6091]

Awesome frame! Eventually I want to build a cinewhoop and use walksnail module on my hdzero goggles.

[@kurtzFPV]

Just finished my build today. I used all the components from an old style cinewhoop frame and set up with Inav, a magnetometer/gps and a lidar module for hopefully maintaining very steady altitude when flying low. Also great for position hold. The hover test went smoothly and looking forward to testing all the other modes sometime this week. It is a great looking machine, but not the easiest assembly. Worth it so far though. I wish I'd noticed that the dampening gopro mount wasn't included with the pro frame when I ordered it.

I also ordered this frame and want to install a lidar module along with INAV. I am just wondering which lidar module you installed. Can you share its name? Thanks

[@kurtzFPV]

@ I installed the inexpensive Matek module that is widely available, at least in the US. Although INAV 7 recognized it and I had my magnetometer calibrated, I could not get things working correctly in the assisted and autonomous mode's, so I then installed Betaflight. I could at least get return to home working good enough to get back close to the home point. INAV flew nicely. I just couldn't get the other modes working right. I may try again at some point. Please come back and let me know if you are successful.

[@mlentsch]

I love speedybee's designs. I just built the Master5. It was a joy to build and flys better than anything else I have. Only $65 bucks - nice box, instructions, hardware... chamfered edges... compare that to something like the Apex - what a joke!

[@nelsonabtmeyer8739]

Which Flight Controller Setup would you suggest for my TBS Tango 2?

[@dimitarnaydenov90]

Please make a full build video!!!! Looks really good Can it fly with the bigger gopro with the screens?

[@Curiousity0309]

The "hood" on fpv camera is meant to protect the lens in crashes. If I take a non pro version (flat bottom plate), do you think there will be enough space to fit a full 30x30 stack with vista/link vtx?

[@ayoaina_fpv]

Great stuff! Which motors did you use here please? Thanks.

[@maxourc4178]

Hi. What is the motors on his drone? How much time of flight ? Thank you

[@Sashalexandros]

Do you think can a walksnail vtx and speedybee fc-esc stack would fit?

[@donshots7175]

Can use Dji action 4 on this instead of GoPro mini?

[@Ash-vi9mt]

How it is compare to GEPRC Cinelog 35?

[@tonytillman316]

When is the release date for this thing?

[@focalpointvideo]

I just built this & it will be my 1st whoop, I fly 5”’s mainly for cinematic purposes. My question is are there any good presets in Beta flight you can recommend for super slow indoor type flying? &/or rates? Thanks

[@glitchunicorn]

oh look at that! I'm glad they put feet on it.

[@Shauny_D]

There are 20x20 mounts but will it fit a FC and esc 20x20 stack? I'm thinking of just swapping parts from another build into it...

[@MatthewTaylor3]

An ND filter for the FPV camera is still useful to reduce jello while doing certain manoeuvres.

[@garettflores5281]

Wouldn't the motion blur from the ND filter interfere with gyro data and produce poorly stabilized image?

[@MatthewTaylor3]

@@garettflores5281 No, if you turn OFF the built in stabilization, then stabilize later using a tool like Gyroflow. This gives best results and the widest field of view and better lens correction than what is in the camera itself. The beauty of using something like gyroflow is that it stabilises at night and really low light conditions too that the camera can't do itself.

[@Oli-vt9sh]

Found fitting a capacitor and o3 unit in this frame… has anyone found a way to make them all fit without really squeezing it shut?

[@goldfishhomebd1276]

Which lipo did u used? Whats the total weight?& What's the flight time?

[@Techgv]

How much weight it has with go pro

[@Jaceace87]

Good video love it

[@dragoslash6136]

can the waksnail moonlight fit

[@HuntAndFishExchange]

Nice - How does this compare with the Pavo 25 build? - Should I remove the guts from that build, upgrade the motors and build this?

[@TRONCATFPV]

This is a 3.5" drone whereas the pavo25 is a 2.5" drone. This one will no doubt be faster but its also bigger

[@dronefilmsgermany]

Was your vtx Plug and Play?

[@rainbowrunner1136]

But may I know, why did u use axisflying motors and not speedybee? What motors would you suggest?

[@TRONCATFPV]

I used Axis flying motors because those are actually what speedybee sent along with the frame. They ended up working great with this build!

[@ElChingonFPV]

I've heard usinga 30x30 stack could prove difficult due to space. Do you see that as a possible issue?

[@TRONCATFPV]

I could see some 30x30 stacks being a tight squeeze, especially ones that have bigger motor pads and battery connectors

[@lorikvlog]

What is the fly time of this

[@grhosso]

the question is: is there enough room for a stack FC+ESC or it shall be used an AIO FC ?

[@TRONCATFPV]

I personally have an AIO but you can fit a stack

[@iCrazy414]

How would you compare this to your squirt?

[@TRONCATFPV]

I feel like once I get my 3.5" 5 blade gemfans on this thing I will like it more than the squirt. Once I try out the 5 blades i'll report back 👍

[@user-kazenodrone23]

good♪

[@HamptonFPV]

🤘

[@BabaBlacSheepFPV]

Will a 1506 4300kv fit here?

[@ipranoj]

Yes it does. I've used a 1507

[@DiTuttoUnPo72]

Hi I find that cinewhoop are too noisy.. Then the 35 is as big as a 5" inch.. Mine will be disassembled soon and I will do another project on a real 3.5"

[@user-yo7ku2kb5w]

what is the flight time?

[@TRONCATFPV]

This will vary depending on what FC you use, how fast you like to fly, how heavy your drone weighs, and what battery you choose to use.

[@crazylolsbg]

I love the frame but no money :(

[@MovingCameraChannel]

What? How? But I've already bought five Pavo 25 frames. )))

[@TRONCATFPV]

The pavo25 frame is a great 2.5” frame 👍 This one is a 3.5” frame though. Different use case 🤙

[@zoeconner11]

Ever draw stl?

[@TRONCATFPV]

no lie, I am designing a camera mount for this drone right now lmao What STL do you need for this drone?

[@zoeconner11]

Naked hero 7