Always putting in hard work gotta love it!! POV: I’m the fedex guy 😂
@EdgasketGarage8 ай бұрын
MVP! Hope you know how to drive manual!!
@LoganDoesntHaveAids8 ай бұрын
i love the way you shoot your videos, absolute diamond in the rough when it comes to car content, 10/10
@loganmclennan26178 ай бұрын
I agree, from a fellow Logan who also does not have aids (as far as I am aware)
@EdgasketGarage8 ай бұрын
lol this is rich
@EdgasketGarage8 ай бұрын
Thank you Logan
@mastercricket76268 ай бұрын
I'm dead with the comment and name 😅😅😅😅
@jn71548 ай бұрын
@loganmclennan2617 what's the chances there's 2 logans on one video and neither of them have aids? Seen better odds in Vegas
@AznMrTurbo8 ай бұрын
Ed your sooo underrated! Pls keep up the grid bro
@EdgasketGarage8 ай бұрын
Rock on dude!
@topreviewer59238 ай бұрын
Fed ex guy gets to smoke the joint while cruising the Audi the only true way
@topreviewer59238 ай бұрын
My Volvo 240 had rear fog light
@Broskiee8708 ай бұрын
That ending.. Heads: R8 | Tails: R8 🤣
@EdgasketGarage8 ай бұрын
I had to get this car done
@lalalandtopg5 ай бұрын
DONT STOP KEEP GOING DONT QUIT YOUR DOING GREAT
@jeffkovatch1038 ай бұрын
Your vids keep getting better and better. Loving the channel! Been here since the last R8. What a joy to watch you gaining subscribers. Keep it up!
@EdgasketGarage8 ай бұрын
Thank you for following along. I miss that old R8!
@caylonsubhar16818 ай бұрын
Love your editing style dude,brings more excitement to car content
@EdgasketGarage8 ай бұрын
Thank you sir!
@kyledutrahockey8 ай бұрын
10/10 as always Ed Gasket! Can't wait for the Evo!
@EdgasketGarage8 ай бұрын
My buddy ❤️
@Justin-bz1dp8 ай бұрын
@@EdgasketGaragehi
@ericbittner26678 ай бұрын
That notary is literally aroind the corner from my house😂 great vid as always Ed!
@EdgasketGarage8 ай бұрын
Local support! Love it
@Alexdaballer228 ай бұрын
Feels so Exciting watching ur cars getting rebuilt cant wait to see the final look of the Evo!!!!
@EdgasketGarage8 ай бұрын
Thank you Alex!
@criordan54378 ай бұрын
Great job Ed
@EdgasketGarage8 ай бұрын
Cheers mate
@SomeJuanPlay8 ай бұрын
You're a real mechanic in my eyes Ed
@EdgasketGarage8 ай бұрын
I’m a pretender
@christianludwig10748 ай бұрын
I think those white wheels would actually look really good with a light blue wrap. Also, I’d really like to see a video where you explain/ take us through the process of buying a car from auction and assessing if its worth rebuilding. The videos are always great and I'm looking forward to the next one (even though its not a VW 😄).
@EdgasketGarage8 ай бұрын
I agree the White wheel goes well with a light blue/red/organge/yellow/green
@aarontreanor8 ай бұрын
He's good. Just so good. Love the stance/fit, looks 💸💰🤑
@EdgasketGarage8 ай бұрын
You talking about my Fedex guy?!
@aarontreanor8 ай бұрын
HAHA!@@EdgasketGarage
@dylanm24106 ай бұрын
Best car KZbin channel of ALL TIME
@Mnmunky6 ай бұрын
Another fantastic video. Excited to see what color wrap you choose. What was the value of the suspension resistors? I worry about the longevity of my magride… And where do you get all of your energy from??? 😂 Keep up the great videos! Edit: Found it on the R8 Talk forum. 1.5Ohm / 100W resistors. Only works for the Gen 1 and Gen 1.5 R8.
@DuncanLiban58498 ай бұрын
So...just smiles Hahaha
@EdgasketGarage7 ай бұрын
many miles many smiles ahead
@bradleynevills44448 ай бұрын
Great job brother keep up the great work
@EdgasketGarage8 ай бұрын
Right on Brad!
@callmecue8 ай бұрын
Not sure about other brands but late model American spec Audis DO have rear fog lights. Extra bulb in the tailgate cluster. Handy for foggy weather days with limited visibility.
@EdgasketGarage8 ай бұрын
You’re right you can tell if you have it by looking at the light knob on dash. BUT there is an additional light you can buy as the video showed.
@motdraw128 ай бұрын
When you solder, hold the tip on the join you want to solder for a little longer so when you feed the solder in you not feeding it onto the tip of the iron but into the hot join you intend to join, gets a better flow and join 🤙
@EdgasketGarage8 ай бұрын
Thanks for the Tip Tom 🤜🏼
@motdraw128 ай бұрын
Glad to help, love your vids man
@OoKwyl8 ай бұрын
I enjoy your videos , I’m one of ya Amazon drivers lol seen ya channel name when you had the Bentley . Love the content !
@EdgasketGarage8 ай бұрын
I love this! Thank you for watching. Catch you next time you stop by 🤜🏼
@StraightLineCycles8 ай бұрын
for an even cheaper option, remove the clear lens on your cluster, paint the useless suspension light with flat black touchup paint from the back side of the bezel.
@EdgasketGarage8 ай бұрын
I’ll use my left over check engine light paint
@Tpass4328 ай бұрын
Another good video Edward. Keep it up
@EdgasketGarage8 ай бұрын
Thank you!
@hado-atlanta8 ай бұрын
could you please make a video about step by step on how to change salvage title to rebuilt title. thank you
@EdgasketGarage8 ай бұрын
It’s certainly a process
@Spartan375X8 ай бұрын
Almost 14K subscribers, I think that's more than double from the time you put out the Grom video and I subscribed then.
@EdgasketGarage8 ай бұрын
Wow throwback! That was my first salvage purchase.
@SimonBambrough8 ай бұрын
Love the video as always dude 😊
@EdgasketGarage8 ай бұрын
Thanks Mav!
@Drostyles76765 ай бұрын
I read your post on lamborghini & you won a subscriber
@ISLAMICSTORIES138 ай бұрын
Nice videos man! im a new sub. what state are you in? so much easier here in TN with rebuilds. we just send the before and after pictures and receipts for parts straight to nashville and good to go. its looked at by an anti-theft unit to make sure its not a stolen car or stolen parts but there are no mechanics involved lol. and the body panels are usually all kinds of different colors or unpainted and they dont care.
@EdgasketGarage8 ай бұрын
I envy you for that! I'd have a garage full of rebuilt cars
@pastoungatos78528 ай бұрын
I suggest if you can buy this computer that plugs to the obd2 port (I don't remember it's name) so you can clear the codes alone
@EdgasketGarage8 ай бұрын
OBD11 pro!
@soundoflasers8 ай бұрын
Do you think the same suspension trick would work on an audi that came with air supsension? Without deactivating the suspension warning light, the adaptive cruise control won't work, and I'm keen on keeping that function! Thank you. Love the videos btw :)
@EdgasketGarage8 ай бұрын
Good question. It would work if the resistance from the factory suspension is a fixed number. If the resistance is variable, youd be in trouble. I also don’t know what I’m talking about! Not afraid to say it
@soundoflasers8 ай бұрын
@@EdgasketGarage Thank you Mr. Gasket.
@MomotoMan8 ай бұрын
Don't wrap it, the silver paint looks great with the white rims and red calipers! Salvage cars ftw. I worked on my copart audis today and even used obd11 as well.
@EdgasketGarage8 ай бұрын
Thanks for the comments! The white on silver does pop
@mastercricket76268 ай бұрын
Dbl standard .. or is it just a dbl coin meh 😅.. . Na but hell yea brotha. I know u happy as all can be now (I try catch my tongue as I seen u say family channel when u found something in Evo and what to do with it is obvious but then again , I liked your idea of break it down into the paint 💪🏽🤘🏽 then it's a canna-car 😂 lol .. na but super happy for ya tho on the r8 bro , I know u happy now u can rip that rad machine (I love the r8 and I think it is the a6 both dope to me ) legally ... peace and love bro keep it rad stay safe and build on.. l8z famz and keep having fun.. ps sorry I'm adhd so all my comments are paragraphs 😅
@EdgasketGarage8 ай бұрын
Thanks for checking out the video man 🙌
@slo_5.0h498 ай бұрын
Imagine doing the paint thing and then getting pulled over by a K-9 officer for something and he asks if he can search the car! LMAO! That be so funny to watch!
@isaacfalvey8 ай бұрын
You lied to us.😂
@EdgasketGarage8 ай бұрын
When you lie so much you can’t even remember what you lied about
@whobroughtdude22318 ай бұрын
I can confirm this man is 100% correct. I have 996.2 911 and a 1970 Camaro I’m working on simultaneously. It’s exhausting. 😂😂
@EdgasketGarage8 ай бұрын
Two great cars 🤜🏼
@AWD_T8 ай бұрын
Any reason why you don’t use flux?
@EdgasketGarage8 ай бұрын
Lack of knowledge. Between you and I when I stopped recording I started all over And learned that the wire has to be as hot as the iron 🤪