My Trick on How to cut in walls!!!

Phone Number: 951-764-5043
Facebook PSP Page: / prost. .

[@darreneffle4118]

I served a 3 yr apprenticeship and been painting for 22 yrs. When you paint long enough over time you have a sort of style or way you will brush roll and spray. Met a lit of painters who hate painting. I consider myself blessed to be a painter and still live what i do. My customers tell me it shows that i love my job.

[@jasonmiller32]

I hear the same thing. I love painting and been doing it for 12yrs

[@Ginge-uh6lo]

Bruv .. I’m from London England .. currently in the states .. but just moved from southern Spain too .. been a painter all my working life .. All the trades I work with always tell me they hate painting … WE get the praise .. WE make the job look finished .. … I wouldn’t do any other job .. plus it’s not taxing in the body .. we still look good .. not falling apart my man

[@jeromegarcia5396]

Lol everyone jumps in to say you wrong or their way is better, but there's no science in paint, you find your groove and rock with it, this works, and may not work for anyone else... Being able to cut without tape separates novice from pros... Bro out here left hand on a ladder holding a camera helping you, show him respect, plus a nice clean work space, no cutting corners, that's professional 👍👍

[@jamesb7290]

Exactly, very impressive work here.

[@jimmyhoneycutt1]

None of that matters when you end up with a shitty cut in.

[@annrunning]

Yes, very good work here. Painting, whether on canvas or a wall, is an art. There’s no 1 correct way

[@drumsofviolence]

Yeah everyone has a better way, but yet here they are doing a search on it 😂😂😂😂

[@alsheremeta]

What you say is correct, but painting doors without removing the handles is being lazy in my opinion...

[@kishka7]

1/12/24 Great video - I am a semi-retired handyman in Northern California wine country. Cutting in is my thing! I would suggest / recommend that when holding the brush and cutting in that you NEVER flex your wrist - the motion comes FROM THE ELBOW - NOT the forearm/wrist! Because if you move the wrist it creates a radius motion that curves the paint line.

[@daryloya]

I murmured a cuss word when you went left handed. That's mind-numbing. Awesome painting skills.

[@craigkeller]

An old man learned a trick from a young man. Thank you 🙏

[@robbhawks2568]

3" brush rocks. Perfect cut in brush. Dipping a brush into a bucket does not load the brush. The paint clings to the outside of the brush. This can cause drips and pour paint flow onto the wall. Dip brush into paint and then press the bristles against the side of the bucket forcing the paint into the middle of the brush. Do both sides. When done correctly you can pick up the brush without a drip and as you draw your paint stroke the paint will flow without dripping. It is like ink inside a magic marker.

[@jessicafalstein]

good tip. thanks.

[@jbj27406]

Now that you mention it, my father used to do that with his brush when he was painting windows or trim. He'd dip it, then pat the inside of the paint can on both sides, emerge from the paint dripless, and lay down a line that he could just snug right up to an edge. He had a lot of practice and a steady hand, but your technique is a big part of it. Thank you.

[@pingpong9656]

Do you press the side of the bristles into the side of the can or do you press the end of the bristles?

[@robbhawks2568]

@@pingpong9656 Press the bristles into the side of the can. This forces the paint into the bristles. It is a quick press press, and then out of the can and onto the wall.

[@jbj27406]

@@pingpong9656 First, you have to be painting out of a "pot" or pail that is less than half full. Then you immerse your brush in the paint, bring the brush up out of the paint and kind of slap the sides of the pail with your brush a few times. When you can lift the brush out of the pot and it doesn't drip, you're ready to approach the work surface or edge. You really have to have some space on the inside of your pot that is not filled with paint so you can slap or press the flat of your brush to that surface.

[@skyhawaii5446]

Tough cut brother. Very few painters can cut with both hands. Even fewer can cut dark colors against a white ceiling with a textured finish and achieve a good cut line. You showed a close up of your work in progress. Beyond impressive in my professional opinion. There are a lot of videos that show the before and after. Very few show what you just did. Great job! I only have 40 years of experience, so please accept my humble message.

[@hairylarry6167]

This video is cool. I'm 67, do a lot of painting. I am really impressed with that perfect cut line. It helps to know these skills when you have a bright white ceiling and darker color for walls.

[@Jacob_Dwyer]

You said it best: practice. Super clean, great painting, really pro.

[@WilliamFontaineJr]

I painted professionally for a few years. Never seen your tip, but it makes really good sense given my experience. Retired now, but will try that text time I paint. Thanks.

[@ethanboggio3314]

I believe this is a method that will work for me! I get blinded by the white after awhile and it can be hard to distinguish wall/ceiling line. I'll be able to see the line created by the knife and have a guide to follow now! Thank you so very much!

[@tonyc7352]

Yes, there is something about cutting in to a white-on-white corner that gets me sort of disoriented for a moment, this gives you something to focus on.

[@raybrintnall3368]

Been painting for years on my own home and rental properties, and that is perhaps the best tip I’ve seen for achieving a nice line between the ceiling and wall. I also breathe in slowly before applying the brush then gradually exhale when brushing. As you say, “no rush.”

[@leroychavez9409]

thanks for your answer.

[@matthewwalden656]

#2 pencil does the same thing

[@progression_decibel]

My dad taught me the same breathing technique when painting. Makes a difference!

[@gordonmorrow]

I always cut in ceilings while wearing stilts (Dura- Stilts, 18”- 30”). It’s much faster and less tiring than a step ladder. You just walk along and can easily position your body for best comfort and efficiency. Tip: adjust the stilts so your head just skims the ceiling. Example: 96” ceiling - 72” tall = 24” stilt height. Love your tip with putty knife. I never heard that one before.

[@robertrohr3990]

Painted my whole life. Worked for paint contractors while in college in the late 1960s. Learned the business from them and ended up as a successful painting contractor for over 50 yrs. Air compressors and paint pots were still in wide use when I started painting, so were oil base enamels. I went all airless during the 70s and never looked back. I also learned to cut in with either hand and tried many different ways to get clean lines. Good video.

[@sleddy01]

What does this have to do with anything?

[@davidcoleman757]

I think any painter worth their salt needs to be able to cut in with both hands. I'm a leftie, so I had to learn to use my right the same way. There are always areas where you have to swap hands! I really liked this guys cutting in - I think with painters it's kind of a signature thing. We pride ourselves on a nice straight line.

[@wassupjg]

@@sleddy01 damn son he's just sharing his experience and said the video's good, chill out

[@sleddy01]

@@wassupjg That's all the world is anymore. People hanging their opinions on anything that will hold it. At least segue into me me me.

[@chrisgriffith1573]

Never used the Benji Moore products... they are a bit pricy, and I always felt they were somewhat plastic-like. I always used my 5n1 to smooth a line along the knockdown, the 5n1 is always in my side pocket, and never leaves my side, my fist boss would send people home for not having: A) 5n1, B) Rag, C) Painter whites. Another good trick is to use a square sanding block, and force a corner into the top edge of the wall where the ceiling meets the wall. This works better on the wall before you prime, to cut into the knock-down plaster, and also gain an extra edge that the wall finishers didn't leave. You are the FIRST painter on KZbin that I didn't tag as a crappy handyman who THOUGHT he knew how to paint! You are right about tape, and about the only reason I have ever needed tape was to mask off the baseboards and chair rails to keep the roller sprinkles off them!

[@darreneffle4118]

The guy that taught me 20 + yes ago was like that too. Always white, always knife in?back pocket. Had to paint a straight line vertical and horizontal in the middle of a wall, cut in with no tape. Even had me take apart my first sprayer and put back together. ( so would really know my tools like the back of my hand and know how to repair when your back up rig is needed by Monday.

[@jaypreddy8185]

I’m a novice painter (as a matter of fact, I hate painting 😆) but I learned that it’s a lot less work “free handing” like this video than putting up tape. Putting up tape just makes a mess for me. I learned how to apply the right amount of paint, how to angle the brush, how to apply the brush strokes and how to be ambidextrous just like in this video. Just like he said, takes time and patience

[@ronaldshank7589]

I can relate to what you're saying, when it comes to taping. I can definitely tape, but I hate wasting product like that, especially when I know that, if you take your time at cutting in, and with painting the trim, you can get as good of a result, as someone who tapes. I'm not against the people that tape, but I guess I just don't understand why they can't take the time to learn how to be accurate in their cutting in, and in painting the trim, that's all. Have a great day, and when it comes to painting (Or anything else!), ROCK ON!!!

[@MV-wb2cz]

they probably hate painting as much as you do lol that's why they tape so they can be really fast at the ceiling and at the trim.

[@SonnyCider]

Good job! You learn something on each gig. All the best to you.

[@marcymathieu4463]

Thank you for this tip . I just started painting and I appreciate the advice on cutting in . Great job .

[@guyfawkes578]

Here is another tip. Give me a call, gorgeous.

[@airborne652]

Great tip with lightly scoring a line to follow. I’m a novice and struggling to get a perfect line but I’m determined and will succeed eventually.

[@ethanadams2013]

I like the 1" square head brush; holds a lot of loaded paint so once you get in the groove on a line, the paint lasts forever and you can just keep going.

[@annestone3211]

Cutting: perfection. Thanks for the great video!

[@gypsydildopunks7083]

Most painters I see are the worst, thanks for doing a bang up job

[@sharonslodounik9844]

Very clear demo. Great explanations and execution of painting!

[@ParagonBG]

Woooow a painter who actually cares!!! Good freaking job man! I'd hire you in a heart beat!

[@davidcoleman757]

Nice cutting in, and boy the spray job on the woodwork looks good. Great vid.

[@1951timbo]

Brilliant prep work. A true skilled tradesman.

[@joesimonetti]

Just like anything...it still takes practice, patience, and skill...

[@Esiddik]

Danggggggggg !!!!! right hand, left hand while holding the camera too !!👏🏼👏🏼👏🏼👏🏼👏🏼 never seen this tip before will try it for sure!

[@jaybickford512]

Awesome tip! It will definitely make my next painting job easier and more professional looking. Thanks for sharing.

[@donaldwayne4219]

Thats a neat tip. Beautiful finish on doors and trims, excellent work.

[@seanmcaleavy2369]

You seem pretty knowledgeable. Purdy brushes are good, but you really should check out a Corona Cortez. They are comparable in price but are of much higher quality. They hold more paint and release it in such a smooth and consistent way. Cutting the wall at the ceiling would be a perfect way to compare the two brushes. Do one wall with a Purdy and do the next with a Corona and I guarantee you will feel the difference.

[@beeenn649]

45 years' experience here, I use a 3'' wall brush or a 4' wall brush if I can get them. Perfect cut line, 3 times faster. I brushout door bucks faster than you can tape and spray them. We were taught the right way buy guys that were around before rollers were invented.

[@beeenn649]

Thanks, I know a real mechanic when I see one. If you're swinging a purdy brush, then that's all the proof I need that you're not a painter. 1/2 stock, if that, one wedge and what the hell is up with that angle thing? I used to cut in 6 over 6's with a 2-1/2 flat, hell, we had to cut the glass on a ladder, braking the cuts on our knee and using a speging gun to shoot those diamond points into the mullions. In those days, it was the painter that installed the glass, that's right. We were PROFESSIONALS.

[@ExNihlo]

Fantastic idea and video!! Thank you so much for sharing this knowledge with the masses 🙂

[@andreww6738]

Looks great man! Will give it a shot. Thanks for that tip, looks awesome.

[@svenben9868]

I worked for a high end painter/cabinet finisher for about 7 years. Before getting the job I was ignorant to painting.. there is a difference between painting and being a professional painter. My boss could see a crooked cut line or a holiday from the driveway.. I learned there is a technique to straight cut lines. Chinex soft bristle. And just like when target shooting.. exhaling when painting keeps your cuts straight. At least that's what worked for me. We never used tape for cut lines. That's homeowner shit. Lol

[@designx8693]

ha ha. yes exhaling does help steady your hand. My problem is I go so far that I forget to inhale again. lol

[@markanthony3275]

Tape is for people who can't paint.

[@qasmb1546]

oh wow you didnt use tape. Guess what alot of people use tape and get perfect lines.

[@qasmb1546]

@@markanthony3275 Nonsense. Tape is to save time. Cutting in with a brush takes ages, is more tiring and will not even get a line as straight as tape.

[@markanthony3275]

@@qasmb1546 A professional painter can cut in a kitchen , without tape , in about twenty minutes. How long would it take to tape all the cupboard edges and fixtures in a kitchen, and then have to cut it in ? I've never seen any of the professional painters I worked with use tape. One guy could pass his brush all the way around a door knob in two movements, and never leave any paint on the door knob.

[@kathleenleary8296]

I learned to cut in with either hand, too. It saves so much time!

[@guysolis5843]

Excellent tip. I used to paint, it's so tedious but your project is looking good..

[@Santos-ek8md]

The trick is great bc the 1-inch knife making the line lends a visual for you while being patient & moving along. Great work 😎✌

[@ChadPrestonOfficial]

WOW. That looks really good, dude. I'm going to use that technique from now on. Awesome!

[@dionisioramirez6706]

I was taught this trick by a union painter, and I have been using it ever since. Its great to use when painting dark colors next to light.

[@ken1per]

great video and a new tip i never thought of!! thanks very much i think you did a great job with this vid!

[@Applesupnorth]

I like your knife trick, I'll be using that 👌 Try turning your brush so you are using the side bristles more rather than just the tip(not completely parallel to your line, but much closer to parallel than perpendicular).. Once you get a feel for it, you'll notice your lines will be even straighter and you'll be able to go longer per dip. The way the bristles are installed in the brush makes the paint flow from center to edge, and heel to edge... using more of the edge will allow you to empty the brush more efficiently without having to work the bristles back and forth as many times to refill the tip, thus creating straighter lines faster and more easily. Also when trying to get away with 1 coat, where the color is barely covering: on your final pass, turn the brush farther past parallel, so the heel is closer to your line than the tip. This will release even more paint, thus better covering the area near the line where the roller cannot get. The things you learn after 40yrs in the biz :D

[@M_Ladd]

Learning and trying to explain so people can understand what you are trying to do are two different skills and abilities. They do not always go hand in hand.

[@scooterp7009]

Yah

[@MV-wb2cz]

do you like 2.5" or 3" angled brushes for cutting using your method? I feel like a 2.5" would be perfect for your method.

[@Applesupnorth]

@@MV-wb2cz For me, it mostly depends on how many tight corners or trim are in need of cutting.. If it's mostly long straight sections with minimal corners/trim, I use 3". If there's lots of corners/trim, I go with 2.5".

[@zangsax]

Dont care what others say , havent seen their line. Yours is nice. Good job.

[@stevenrichardson6793]

Nice to see how the pros do it...I hate painting, rather be beat with a rubber hose than paint !! But Job Well Done !! Thanks for the tip !!

[@PercussusResurgo]

Find a sadistic painter and you will both be happy? You can thank me later when you are recovering from your beating in your freshly painted home.

[@roysnider3456]

This is a great tip, I’m currently working on my house and when cutting in the walls I have trouble seeing the corner and the line solves that. Thanks.👍

[@benjamanalthaus5434]

I started a painting business in February this year. I’ve had opportunities to increase my skill and really step into the trade, but I think I made a mistake. I stopped cutting in with a brush and instead started doing everything with a 4 inch roller for a while. I’ve gotten much faster at masking but I still feel like I should go back to the brush.

[@tobybailey1285]

Its called scribing. You basically create a small groove, or dam in the drywall for your bristles to ride along and make it more difficult for the paint to go beyond it, as long as you're somewhat careful.

[@mgtowski395]

Appreciate the tip. I'll try this the next time I'm painting.

[@godbluffvdgg]

Painter for 30 years. We normally just freehand the cut-in...I'm glad you didn't go right up to the edge to cut in...But, in production painting, ya gotta move the paint...it's a one or two stroke process...Especially with flat...And, naturally depending on the surface roughness...

[@gregarioussolitudinist5695]

That tip about removing tape as soon as you finish the cut in is like having money in the bank. Paint, then peel the tape, then take your break.

[@darknes7800]

Yup, just let the paint set a bit....the peel. I still prefer the brush cut in.

[@bob12345188]

been a painter decorator for 40yrs love my job its just everthing that surounds it im in the uk tho ..

[@trpill]

professional painter here, and i like this. I usually watch these sorts of videos with a very critical eye, but yer this one, i am going to try it today. I will report back if its bullshit lol

[@jwil4905]

Well?

[@gpo746]

Exactly how I taught myself how to do it ! , Glad Im not the only one doing it .

[@denatindale6914]

Thank you! I didn't realize I needed to paint under the edge first.

[@NiktheEnglishGreekCypriot]

So glad that in England we have mostly flat texture-less walls

[@PaulCloves]

Great tip I can’t stand cutting in ( I’m useless at it ) it’s so difficult getting that lovely straight neat line especially if ur using a Dark colour next to a white ceiling and if u get it wrong it looks awful in the past I have used tape ( frog tape) and it did work with no bleed through but it takes so long to put that on neatly I’ve seen on you tube specialist cutting in rollers I might give them a go on my next project and c if they make it easier

[@maddierosemusic]

I can't believe you tape the door handles instead of removing them. That Advance looks super sharp anyway.

[@notsure2923]

I was a painter for 20 years and I’m telling you a 3” brush with just the right angles is enough and when used properly acrillic pain is bled perfectly into trim

[@p165711]

Damn! Now I have to redo the Bedrooms! Great tip. Tx.

[@AnthonyDibiaseIdeas]

Thank you. The putty knife line is a brilliant idea.

[@STV-H4H]

This is the missing link I’ve been looking for! I imagine the line serves also to be a little bit of a border than traps some so it doesn’t seep upwards. My ongoing dilemma is always the ceiling or walls first argument. Having two contrasting colors makes this a never ending back and forth battle of touching up each color until my eyes stop telling me it’s acceptable or not. My original plan on the rooms I’m currently working on was white on white. But because the casing was my most important piece of the project, and it had to be white, the walls had to be done another color my simple scheme was not going to be pleasing. What surprised me though was that the top shelf Sherman Williams paint (grey) still revealed countless teensy white specks after it dried. My first coat is (except on new work) usually mostly acceptable. Hate admitting this because it’s bad form. The second coat goes really quickly with good paint, but it is still a bit of a hassle. But I’m certainly trying your tip when I get back to the ladder this afternoon.

[@martinavizcomm]

I use tape, a small roller & then fill in with a 1 inch soft brush. Brilliant finish & saves me loads of time.

[@ronaldshank7589]

Ok... not bad. Not bad at all! Great work! Also:You mentioned about being able to do your cut-in work with both hands. You're right-It takes a lot of practice, and caution. I can do that, too, but it took a long time for me to get the feel of things, in that particular part of the job. As I said:Great work! I'm only too happy to subscribe!

[@ricksolari9570]

Does the scratch also draw paint through cappillary action? Does it act as a barrier?

[@jamesmonty7667]

Yes great tip , that's what I do or use a H rated lead pencil ✏️ if the knife doesn't work. Great guide for perfect straight lines 👌

[@skylark4901]

I'll be honest I was stressing out a little just watching you, I don't remember exactly but I don't think I was breathing the whole time watching you paint 😆

[@jamescameron7633]

Nice work bro

[@Aleboy40]

Thanks Brother , I have a job coming up for a good Neighbor ,No Charge you know ..and I am a roofer lol So Thanks for the Lesson .I needed it

[@bernardmoss7171]

Their is more than one way of doing good professional painting job when it comes to cutting in and all the other bits involved. Each to their own. At end of the day it's all about providing a neat tidy job with no streaks, runs and not hitting woodwork or ceilings.

[@1painter4hire]

Great Explanation Boss 👍

[@mansardmanor3869]

My trick is similar No putty knife No tape I lay my brush parallel with the edge and lay a smooth edge in corner I also use the angle of the brush in the corner Try it, works great

[@wally7856]

He's cutting in textured walls, that line he makes with the knife gives him a smooth surface at the joint.

[@johnnybravoBoyah]

Great video & tape tips

[@andrewsbbq]

I use a 12” drywall knife as a ceiling guard and I can fly with the brush. Quick wipe of the knife every once in a while to keep a clean edge. Easy, quick, cheap, washable and no waste like tape.

[@progression_decibel]

When you use the knife, are you angling it at a 45 degree angle or slightly biased towards the ceiling or wall to prevent paint from trying to bleed over? Thanks!

[@polecat7355]

I'm no pro painter but that's what I do and it works better and faster than this "technique"!

[@KhoaNguyen-xj6gk]

I think your advice is best for the beginner or first time DIY person like me. :) Cut in with brush is for someone who has skill or experience with painting.

[@ortiztino]

Thanks for the advice, keep up the great work.

[@Takataka7years]

Very helpful trick, many thanks

[@Apollo_Blaze]

Great video...Great skills.

[@joelwinter4956]

The actual "trick" explanation starts around 2:00, if anyone is wondering.

[@prostatuspainting1206]

😂😂 that is funny, I’m sorry didn’t mean to take that long on showing the trick, next time I’ll try and get to the point sooner.

[@HEMPHILL84]

No tape crew! Bangin vid

[@forku5749]

Does the line act like a river,and so the paint then goes and sits in the groove

[@ktkt1825]

Your brush technique is similar to how a car striping painter uses the brush: slowly, with full bristle with pressure contacting the surface- the tip and upper edge will 'track', following your movement. Draw from left to right, using the shoulder, not the wrist or elbow for a smooth line. Pre-painting just below the edge ensures a consistent application with the tip creating the edge.

[@bsojdfo]

I’ve started using a Purdy semi oval 3” for cutting in walls. Seems like it makes it a lot easier.

[@prostatuspainting1206]

Oh yea it’s way easier

[@michaelyarmas4423]

You're Modest! you have great skill my friend!

[@prostatuspainting1206]

Thx 🙏

[@greenchie2]

works well w the pointed part of 5 IN 1 also. learned it in Sarasota. I call it the florida trick.Caulking a super small bead along the edge of the tape will help prevent bleeding through.

[@threezysworld8089]

Super easy to cut in by hand. The biggest key is make sure your brush has plenty of paint on it.

[@xbrizzcakez]

Nice job site, did you stage it for the video or is that a normal setting? I just put my brushes down after 40 years in the trade. After hearing your tape comment I`ll add that when doing an accent wall and I knew the client would expect perfection I would do it as follows, Tape the wall then using the adjoining wall or ceiling color apply a little of that color on the accent wall to be painted, then that color bleeds under the tape but it is undetectable as its the same wall/ceiling color, it also seals the tape so when you cut it with the accent color it creates a sharp line that cannot be duplicated by hand, I let the paint dry completely before removing. It is not a practical everyday process but it is worth the time when needed. Keep up the nice work ....

[@prostatuspainting1206]

Yes we use that technique as well look out for a future video on the taping up for cut ins!!

[@JazzyJabbz]

Hi could you please help me? I want to paint my walls But have no idea where to end the line of paint?? 🤦🏼‍♀️ My walls CURVE into the ceiling where it then meets an artex border I hope that description makes sence because it is quite tricky to explain. I have uploaded a very short video to show what I mean. The more I look at it the more it hurts my head as to where the new wall colour should end????? 🤦🏼‍♀️ Thank you so much for reading

[@scottphillips7108]

I know that the putty knife and line is a way for people to try and achieve a straight line but I don't use that method on the rounded over corners because it leaves that upper part of the ceiling color half round over on the wall to be seen [which is very noticeable and unsightly in my full belief] as well you have to have extremely steady hands to get a true straight to the eyeball line so i avoid all this by following the upper half of the rounded over corner line instead of in the middle [where your putty knife line is located] or the bottom half of the rounded over corner line... The way to get the straightest to the eye cut lines when dealing with rounded corners... No putty knife line needed and no tape needed and you eliminate the upper rounded over part that shows the ceiling color onto the wall side... Just straight open hand cutting and your eyeball sight... By doing it that way it removes the rounded and gap look between where the ceiling meets the wall... When completed the ceiling line where it meets the wall is straight like a 45 degree line looks straight when cut in... Instead of the bottom half or the middle half [line] of the rounded corner leaving the gap and the ceiling line on the wall and in most cases uneven cut lines from trying to perform a miracle...Fast and easy and gets the job done without any different effort or set up than when you normally cut a corner line... By bottom and upper round over line I am referring to the exact spot where the round [surface] ends and the flat [surface] begins...

[@margaretWestminster]

You have done a great job.

[@cliffjones3986]

Blue bristle purdy brushes are only brushes I’ve used for over 15 yrs.

[@robertbeck5524]

Awesome trick love it

[@I-sed-no]

Awesome work! Thanks for the video

[@Toasty_1992]

You the man!! Thanks for the video.

[@audreybowles6357]

Thank you for this very good putty knife tip with cutting in lines.

[@TrashyLobster]

Gotta let the paint "roll” up to the texture. Keep the brush loaded. But not dripping. I always dip and then slap the brush against the sides of my cut pail. Gotta cut both ways. I’ve brush cut tons of walls with a "knock down" ceiling texture. If you don’t know what you’re doing it can be intimidating, try it in a closet 1st to get the hang of it, then onto the rest of the house. Thing about it is, if you get a little paint on the texture, no biggie, come back with the same ceiling paint and touch it up. It’s not the end of the world. Practice & Patience, you’ll be fine.

[@swagon4545]

Tape is a nightmare.. Takes hours to put on... & like you said it always bleeds... I'm going take your advice & give it a try.. Wish me luck...

[@prostatuspainting1206]

Yea go ahead and try it, feel free to ask if you have any other questions

[@leroychavez9409]

nice work. I paint at the schools, prepping takes lots of time. my question is, do the professional painters like you tape inside corners to get a perfect straight line, when you have two different colors. I was told to use a paint shield. when I'm done painting, I go back and look for minor mistakes.

[@KenFullman]

Interesting question. Shame it wasn't answered. :(

[@ginawhite3399]

So does paint caulk go on before or after painting? Probably a dumb question but I really don’t know. Do you even use it??

[@dirtycarpet6134]

is that avocado green? thanks for the tips !!

[@reedjacksonmaccom]

another reason this works (to paint to within a few mm fron the ceiling) is because of light effects…. at that junction of the ceiling and the wall the contrast is always going to trick the eye to not see the actual line that the two surfaces meet, but instead it merely sees the two different amount of light reflected from two surfaces that are 90° opposed.

[@designx8693]

I have painted for 35 years and would not do it this way. Look closer, and you see that there is still what appears to be a bright white line between your colour edge and the ceiling. THAT is the line you need to follow for the perfect look.

[@jimmyhoneycutt1]

My thoughts exactly. The cut in is too low. He's also using a stiff bristle brush, and using it edge-wise.

[@wally7856]

Yep. You are better off having the darker color intrude a hair onto the lighter color rather then the other way around. Painting is all about the "look". There is no secret to getting that "look". Take 2 steps back and use your eyes.

[@designx8693]

@@wally7856 I agree. I often tell clients it is the illusion of a perfect straight line. The key is to hide that little bright line as close as possible.

[@jimmyhoneycutt1]

@@wally7856 yep. Just like that old STYX song "The Grand Illusion". Better to run it a little high than low.

[@xbrizzcakez]

I just retired, almost 40 years in the trade myself. That spray texture is what makes trouble for a sharp cut in. Almost makes it impossible ...I prefer smooth walls