Kioti Tractor CK3510SE Annual Review Good - Bad - Ugly

[@itmagic4377]

Thank you for an excellent and thorough review! Have the same class machine, a CK3520SE with about 60 Hours so far on it. Been just as fantastic, and only real issue was when I forgot to remove a wheel lock and drove a few feet, so lost the front tire bead. Use a wheel lock, gps, and steering wheel lock to keep it safe, as I keep mine covered in the woods behind our home until a more permanent covered home is built. The Kioti will surely play a huge part in building a new home for itself! Also have the loader and factory backhoe, grapple, forklift, ballast box, subsoiler, and box blade. Have lights for it still in the box, and plans for a rops cover as well. Just brought home 40 - 60lb sacks of concrete, and was able to move around the pallet from my truck with relative ease. You and a few other good colleagues helped me make a great decision with this wonderful equipment. Thank you!!!

[@tractorrookie]

Hey there! Awesome. Sounds like you are all in. Nice! Looks like you have built a monster machine. Cheers buddy!🇺🇸🚜

[@brucebabin4137]

Beautiful tractor, respect to you for keeping it immaculate. Hope to have one soon and love to take care of it the way you do. Cheers.

[@tractorrookie]

😊Hi Bruce! Thanks! I try to keep it decent. Always washing, or greasing, or something. I think storing them inside really helps. Good luck with your purchase. Take care!🚜🇺🇸👊

[@jimmcghee4742]

I have a CK3510HST and have had problems with the fuel inlet filter. I've had to fish it out 3 times. I use a piece of steel brake line and make a dog catcher by running .030 welding wire down the tubing making a loop noose. Tricky but can be done. I bought a 55 gallon tank and pump mounted to a homemade skid. Problem solved.

[@tractorrookie]

🌟👍. Nice! Good to know!!! Thanks for the tip and for stopping by the channel!!!🚜💪🍺🇺🇸

[@geremychubbuck3730]

So I have a 2017 CK3510 and your review is spot on. A great tractor. Some issues that I've had are: same grease fitting bolt loosening issue, same fuel tank screen pushed into the tank issue (same way as you), top link bracket bolts fell out (they are too short from Kitoi, I recommend replacing them with longer grade 10.8 bolts with locktite blue), cracked subframe for the backhoe (Kioti repaired it even after warranty because it is a known issue - I also now connect the top link to the backhoe under the seat - I HIGHLY recommend that you do this as other manufacturers now (LS tractor, etc.) do this), torn shifter boot from the factory and general loosening of bolts. You have to torque every 10 hours when you grease. I also have about 300 hours on it and love the tractor. Well built for it's class.

[@tractorrookie]

🌟👍 Wow! Thanks! That is a lot of good information. How did you attach the top link to the backhoe? That seems like a good idea especially given the frame issue. I was unaware of the that. Thanks for the comment! Very helpful.💪😎🚜🇺🇸

[@geremychubbuck3730]

@@tractorrookie I made a bracket and welded it under the seat on the floor to connect the top link to. Search the internet and you'll see some examples. I can send you pics of it if I can figure out how to send pics on youtube chat. I highly recommend it and also bracing the subframe in the weak spot where they all break. I use my backhoe a lot and I do know how to properly use it. The backhoe is simply too powerful and heavy for the box beam frame that it comes with. It really needs the top link attached at a minimum. LS does this on theirs as well from the factory.

[@tractorrookie]

@@geremychubbuck3730 Nice! That sounds awesome. One of the guys on the Facebook page. “Kioti tractor owners only” said that he thought Kioti had added supports and that mine was new enough to have them. It does have supports that run up from the frame at a 45. I would love to see photos of your top link. My email is [e-mail] Thanks 👍💪

[@geremychubbuck3730]

@@tractorrookie I just sent you three emails showing the cracks, the repairs to the subframe and the modification that I made for the top link. Feel free to share on your video. I recommend doing this.

[@tractorrookie]

@@geremychubbuck3730 Thank you!

[@davehudson4607]

I like the fuel tank placement, and the filter screen.

[@tractorrookie]

🌟👍 Easy access is a good thing. Thanks for stopping by and checking out the video!🚜🇺🇸🍺

[@PJ-si2po]

Your are keeping your tractor extremely clean, I can see grease around cylinder pins and grease points shows strict maintenance to the book Very honest review and thanks for the video

[@tractorrookie]

😊👍 Hi PJ, I am a newbie to the tractor game, but I try to keep up on what I am suppose to do. I appreciate you checking out the video! Take care!🇺🇸🚜🍺

[@donmacdonald7758]

Great tractors, my nephew has owned that model for 3 yrs. without a problem, he has a cab with heat and air, but no backhoe. They are major competition to JD and Kubota. NICE!!! Thanks from Georgian Bay

[@tractorrookie]

🌟👍 Thanks Don. We have about 300 hours on it so far. We have been happy with it. Appreciate you checking out the video and subscribing. 😊🇺🇸🍺

[@donmacdonald7758]

@@tractorrookie My pleasure.

[@HometownAcres]

Excellent review. I’ve been thinking about doing something similar on my 3510. The only issue I’ve had on mine in 200 hours is the hazard lights being incredibly flimsy. Broke the first trip into the woods with a low hanging branch.

[@tractorrookie]

🌟👍 Thank you. That sucks about your lights, I hope it wasn’t too spendy to fix. Appreciate the watch!💪😀🚜🇺🇸

[@hitied1]

I bought a previously owned 2015 Kioti 3510 w/loader and no regeneration garbage on it I did need to get used to the confined positions compared to my Kubota 5240 Two months and 25 added hours and I am very pleased. I can run my WoodMaxx 9900 wood chipper which surprised me. I like both my Orange machines. Oh, look for a funnel with a long flexible spout.

[@hitied1]

Correction Kioti CK30

[@tractorrookie]

🚜👍 Very nice! I have not had any issues with the regin system so far🤞 Very cool on the Woodmax!! Love it!!! Long funnel! Right on! Thanks for stopping by!!

[@JoshHovis]

Great review! I have about the same amount of hours on my 3510, just under 300. I've been pretty happy with mine as well. Good to see you've had a similar experience so far. Thanks for sharing

[@tractorrookie]

🌟👍Right on! Thanks for stopping by! 💪🚜😎🇺🇸🍺

[@blessed7fold]

Hey I really appreciated the review and how you got to the point. I also want to ask you what you used to make the video in terms of your camera and mic because I thought the production on this video was outstanding. Your voice, lighting and clarity of focus was just perfect.

[@tractorrookie]

😊👍 Hi Blessed!!!! Hey, I appreciate that!! I am usually a “get to the point” type of guy, but it is tricky when you are trying to think of everything about your tractor 😎 I just used my iPhone and a tripod. It works well most of the time. Occasionally, I’ll have sound quality issues, but I do a lot of editing on iMovie and try to adjust for that! Thanks for checking out the video and commenting! Take care!!!🍺🇺🇸🚜

[@blessed7fold]

@@tractorrookie An iPhone?? Really? Wow that's impressive!

[@brontoab1]

I have a 2011 ck35hst. The fuel tank is under the hood. I think under the hood is a more convenient location. Otherwise this updated version looks very nice. The 2011 version is a 2 peddle version. I think I'd prefer your 3 peddle!

[@tractorrookie]

😎👍 Hi Brontoab1! Interesting! Sounds like your tractor is still working! That’s good to hear! I definitely like the pedal setup. Thanks for checking out the video! Take care!🇺🇸🚜🍺

[@brontoab1]

@@tractorrookie I've almost got 800 hours on mine. It runs just fine. I suggest changing the front end loader subframe bolts (the bolts that bolt the subframe to the tractor frame) every 5 to 7 years if you are using the FEL a lot. Those bolts wear out and get loose and I've had 2 break.

[@tractorrookie]

Oh nice! I have just under 600, thanks for the heads up! I’ll keep an eye on that!👍😎

[@Raul28153]

Nive video. I'm getting that model and the walk through was good.

[@tractorrookie]

😊👍Hi Raul, Congratulations!!! Very cool. If you end up having any questions, I might know the answer! 😂🤣 If you haven’t, check out the Kioti Owners page on Facebook. Take care!🍺🚜🇺🇸

[@EarlybirdFarmSC]

Nice review. I have had a few issues myself but minor and Kioti took care of them. Two were my fault of just using the machine. I only got 49 hours on mine though and not quite a year yet. It has just rain so much here.

[@tractorrookie]

🚜💪 It is good to hear that they took care of you. It does seem like some things are just going to happen. I put 200 hours on the first year, getting our property ready. This year does seem like it’s always raining 🙄☹️ Thanks for checking out the video!🍺🇺🇸

[@EarlybirdFarmSC]

@@tractorrookie Yes always raining lol. I was out on the tractor today. Just hit 50 so I’m gonna do my oil change soon.

[@tractorrookie]

@@EarlybirdFarmSC Excellent! It’s pretty straight forward! Enjoy!

[@EarlybirdFarmSC]

@@tractorrookie I’m gonna go back abs watch your video on it again but I’m pretty mechanical inclined. I’m just uncertain about the oil in that filler tube. Seems it would fill up very slow.

[@tractorrookie]

Yep, not the easiest access, slow and steady 😊

[@blipsmann1985]

Just bought one just like it!!!!

[@tractorrookie]

😊👍 Hi Blips! You be are in for a treat! It’s a work horse. Thanks for checking out the video! Take care!🇺🇸🍺🚜

[@stevek6921]

Helpful review during my search for the right brand and size. Thanks much. I particularly enjoyed your warning sticker on the right side. 😆

[@tractorrookie]

👍💪 Hi Steve! Excellent! Glad to hear it! I appreciate you checking out the video!!!

[@martybertrand5119]

I have the same tractor and agree on the oil fill cap- couldn’t they make it more accessible?

[@tractorrookie]

🌟👍 Right?! It’s the little things. Thanks for checking it out! 💪🚜🍺🇺🇸

[@midniteoyl8913]

You can weld on/rig up some heavy expanded metal to that brush guard for branch protection.

[@tractorrookie]

🚜💪👍 That’s exactly what we did in this episode; kzbin.info/www/bejne/b5PHkGagjJili7M

[@midniteoyl8913]

@@tractorrookie - Really great looking job! Better than I was doing, lol. I'm stealing it if you don't mind..?

[@tractorrookie]

😎 Of course!!! If you got the skills! Go for it! That’s awesome! I had to talk my buddy into doing mine. 😜🚜🇺🇸🍺

[@midniteoyl8913]

@@tractorrookie - Thanks!

[@IronSharpensIronPv27.17]

Outstanding review

[@tractorrookie]

Thanks!

[@1of7]

Very helpful info. Thank you.

[@tractorrookie]

👊👍Hi Carl! Great!!! Glad to hear it! I appreciate you checking out the video! Take care!!🍺🚜🇺🇸

[@extraacct478]

The “pto switch” is labeled as the “AUTO/MAMUAL” switch. Be ware of it if you DON’T use it all the time. My dealer set mine to auto during service and I could not get the pto to engage and thought he had messed up my machine! (I finally found the switch set to AUTO, swapped to MANUAL, and went on).

[@tractorrookie]

🚜😊 oh wow! Good to know! Thanks 🇺🇸💪🍺

[@carolmorrison5173]

I think you enjoyed that tractor a lot!,,,

[@tractorrookie]

😁💪 You are correct young lady, Thank you!😎🚜🇺🇸

[@janieberks3201]

Enjoyed it, however I missed where the cup holder is located😜

[@tractorrookie]

😂😂 Oh, there is a cup holder! Very handsomely placed to the right of the operator! 👍💪🚜🇺🇸

[@PurpleCollarLife]

Are you sure it has 286 hours on it? Still looks new! Great job keeping it nice. 😀 I appreciate your thoughts on the backhoe on and off challenge. The 3510 is still in the running for me.

[@tractorrookie]

Finally made it by the dealership episode #104👍🚜😎

[@jstring]

Have the cab model. Love it to death. It eats up coolant but we run it hot to death. First year got over 900 hours and she’s still running strong at 3700 hours. We service it religiously daily and the only thing that’s ever gone south is the link pedal quit working. Took a computer flash to work out

[@tractorrookie]

😊👍 Wow! Impressive hours! Sounds like you got a good one and you are getting your monies out of her. I’m curious what oil do you guys run? Thanks for checking out the video and commenting!🇺🇸🚜🍺

[@pmaint1]

#GAOTU What year is your tractor?

[@tractorrookie]

2019. Merry Christmas!

[@pmaint1]

@@tractorrookie WOW! So many hours in such a short time. Very impressive. God bless good luck and Merry Christmas to you too!

[@jstring]

@@pmaint1 ours is a 2018. And yea we use it daily. Only day it gets a break is Sunday 😉

[@SunnyBunnyAcres]

Fantastic video I've watched it at least 3x now in the years I've been researching what tractor to get. Can you comment on the loader controls - I've heard that these do not have an 8-way loader control where you can lift/curl at the same time. I've been borrowing a friend's Kubota for years and this is a great feature and I'm constantly multitasking the loader/bucket control. I did purchase a CK3510SE/Cab and should be ready in a couple weeks.

[@tractorrookie]

😊👍 Hi Johnson! Thanks for checking out the video and commenting!!! Congratulations on the new tractor!!! A cab would be awesome! I do not think my tractor does a true multi function. I am use to it and I have become fairly efficient at operating the bucket, but there is a delay between the curl and lift and so on. I would say it is slight and depending on what you are use to , it could make a difference. I think keeping the RPMs up also helps, but that might be in my head. I am anxious to hear what you think about it. My nieghbor has a Kubota that used at his place, I really didn’t notice a difference. Take care and good luck with the new tractor!🇺🇸🚜🍺

[@Brookside975]

I love how you take good care of your equipment and have a clean shop! I may have asked you before, but approx. how often in run hours does your 3510 regen? Thanks. Enjoy your channel.

[@tractorrookie]

🌟👍 Thanks for noticing! I try! Constant battle! I would say it will regen every 30 to 50 hours. I notice when I run the rpms higher, it seems less frequent. I always continue to use it during regen, hasn’t been a problem so far. Thanks for watching.💪🚜🇺🇸🍺

[@Brookside975]

@@tractorrookie Thank you for the prompt and concise reply. Great channel. As soon as I can find my KY or TN property I definitely wish to get a Ck3510SE Cab. Cheers, Steve/OHIO

[@DDrenegade6632]

You mentioned the throttle link system. I am wondering, does it automatically engage and disengage? If so, can you manually shut it off when you want full throttle for the pto while driving? I mow very steep hills on our property where I need constant rpm to the pto but would need to be in and off the throttle so to speak.

[@tractorrookie]

😊👍 Hi Peter! Yes you can shut it off. I usually leave it linked. The link just allows you to use your throttle like a car, but at the same time, you can always reach up and lift the throttle lever. I will sometimes do that when I want more RPMs at a lower speed. I hope I answered your question. Thanks for checking out the video! Take care!🇺🇸😊🍺🚜

[@mailmanx69]

17:13 - Rear Differential. Have you ever had trouble making it engage? I've had my CK3510SE for a few months and have NEVER been able to get it to engage. I'm hoping to figure it out on my own because my dealer is 2-hours away.

[@tractorrookie]

😊 Hi Michael! I have used a diff-lock a few times, sometimes I do have to rock the machine forward and back to get it to lock into place. I have heard of other guys having trouble getting it to work. Have you checked the Kioti tractor owners page on Facebook for discussions about it? Good luck! Take care!🍺🚜🇺🇸

[@danclas5983]

Tires have to be actively slipping or spinning for it to engage. Another words you cannot just be setting still and engage it. Hope this helps.

[@williamhannon5067]

Should have cut that hydraulic line block into so if it happens again you only have remove block bolts.

[@tractorrookie]

👍💪 I hope it doesn’t happen again!!! That makes sense, although I am not how easy they cut in two, but it sounds like you are speaking from experience. At the time, I thought the dealer might replace them for me, but I was on the hook for them. Thanks for checking out the video. 🚜🍺🇺🇸

[@kevinrivera5064]

Hi my friend this is Kevin from Arizona I own ck 4010 I wanted to inform you of a problem the DPF filter is a bad thing two times I have had to take it to the dealership for them to reset the computer to regin it DPF restricts the flow of air that can damage motor and something the dealer never told me about and if you clean filter also blow out two lines to sensor every three hours I have to regin what a waist of time Diesel is supposed to smoke and restrictions on air going in and exhaust loss of power damaged motor code won't clear itself like a car filter cleaned spotless a orb 2 won't work

[@tractorrookie]

😳 Wow! That’s frustrating!! How many hours do you have on your machine? So far, mine has been completing regens fine. I’m at 525 hours. I’m sorry you are having those issues! That’s sucks! Take care Kevin!!🇺🇸🍺🚜

[@kevinrivera5064]

@@tractorrookie over five hundred hours restrictions on air exhaust isn't good the dealership says run it minimum of 17 rpm and it will self clean but you can't when cold the computer should reset once cleaned and both air lines to sensor must be blown out you can clean with pressure washer it's going to cost me 170 bucks labor to reset computer 100 miles to and from a hint blow out two air lines and wash filter you will see how much soot is still in filter not removed by regin that's a bad design diesel is supposed to smoke

[@tractorrookie]

That seems really awful! I have not even looked at the regen filter. I wouldn’t know where to start. I guess I’ll have to watch a video.

[@kevinrivera5064]

@@tractorrookie look your a rancher just like me I have a moral obligation to inform you your good people I love the toys you have on your tractor I called kioti cooperate office I want the DPF deleted they don't use it on smaller tractors I am not complaining just concerned I payed cash o want to protect my equipment I own a diamond ranch I rely on my tractor

[@tractorrookie]

Makes sense!

[@willpartin622]

Thank you! Do you have to clutch when going from low to Med range and engaging the 4 wheel drive or Diff lock? Can't find it in my manual anywhere as it pertains to the hydrostatic trans.

[@tractorrookie]

😊👍 Hi Will, anytime I shift gears or engage 4x4 or diff lock, I do it when I’m stopped. I do not take it out of gear to engage 4x4 or the diff. Lock. Hope that helps!!!💪🚜🇺🇸🍺

[@prow6586]

Thanks for the review. Does the "auto PTO shut-off" have a brake on the PTO shaft? I have a NH3 TC33D and my PTO continues to run for 30-60 seconds after I shut it off when I'm using mowers and tiller, so an electric switch to disconnect somehow would not stop the rotating of the PTO shaft. Just trying to figure out how these new tractors work. Thanks, Paul

[@tractorrookie]

Hi Prow! Thanks for checking out the video. One of times that the PTO link saved me, I hit a big rock in the field. I believe the bush hog stopped when I hit the rock, pulled the three point hitch up immediately and the tractor cut power to the PTO. I don’t think it has a brake that stops it, I think it just cuts power. I’ll test it next time I hook up the bush hog and pay more attention. Take care!🚜🇺🇸🍺

[@prow6586]

Hi, I'm still debating pulling the trigger on the CK3510SE so thanks for your being point man on the good bad & ugly! 😁🍻

[@tractorrookie]

Absolutely! It’s a big decision. Good luck !

[@ranchitosantos5165]

I am debating between a Kioti, or Massey F. Any recommendations?

[@tractorrookie]

😊👍Hi Ranchito! Well, probably one of the biggest factors when you are considering two good brands is dealership and dealership support. Secondly, I would compare features of each and determine best value for the money. I went with Kioti with it being a close dealership and best features for the money. Hopefully you can get some seat time and play with the controls. Good luck! Thanks for checking out the video. 🚜🍺🇺🇸

[@ranchitosantos5165]

Thank you for your feedback:)

[@jcammons3692]

That shows no wear I can see. How do you have almost 300 hours and no wear? I have 190 hours on mine and the tires are worn down, the paint on the step is rubbed off, brake pedal paint rubbed off, and various rub marks. All around the loader. I have worked hard with mine and the only issues I have had are bolts falling out periodically after long hours in the field. I have to go over every morning to prevent loss of them.

[@tractorrookie]

Hi JC, not sure what to tell you! Sounds like you are seriously working your property. I have been mostly trying to restore our property. I think the work I am doing is probably light duty compared to you. I’m at 350 hours now and I have lost some paint on the steps and pedals. 😊 Good to hear the Kioti is performing for you! Thanks for checking out the channel!🚜🇺🇸🍺

[@mr.redneck2715]

I think kiote shud build a universal under frame that accepts a backhoe and snow blower. I have a snow blower but no way will buy the backhoe because it’s a royal pain to switch the frame brackets.

[@tractorrookie]

👍💪🚜 Thats a great idea! I don’t they will listen to us tho.😊😉 I’d love to play with a snow blower!!!! Thanks for watching! I appreciate it.🇺🇸🍺🦃

[@stevemiller9190]

How tall is canopy? Max height?

[@tractorrookie]

The Rops height is 99.2 inches. The canopy is somewhat adjustable, but you are likely going to be over the rops and over 99". www.tractordata.com/farm-tractors/008/8/6/8865-kioti-ck3510-dimensions.html

[@bkbrown5881]

Nice job. Good stuff.

[@tractorrookie]

🌟👍 Thank you! The review was your idea. Email me your email address if you want to claim your prize😁😎 Thanks for watching! 🚜💪🇺🇸

[@texastodd12]

How much weight will the backhoe lift. I cannot find the boom lift spec anywhere. Thanks. Nice video.

[@tractorrookie]

💪👍Good question. I’ll check the manual and see if it’s in there. Thanks for checking out the video.🍺🚜🇺🇸

[@texastodd12]

@@tractorrookie I asked the Salesman and he called his Kioti rep. No one knows. It is not listed in any spec. they could find.

[@tractorrookie]

The only thing I found in the manual was digging force and operating pressure. I suspect they would say it’s not designed for lifting. 😊🤷🏼‍♂️ Cheers!🍺🚜🇺🇸

[@texastodd12]

You are probably right, but who wouldn't? I'm sure the position of the bucket has a dramatic effect on lifting power, thus hard to define. Thanks for your reply!

[@texastodd12]

As a side note, two dealers discouraged the backhoe purchase saying I wouldn't need it. Not sure how they could know that but I'm gonna give it a go without and see how it goes for a while. Delivering the 2610 tomorrow, they say.

[@traderjack6151]

Don’t care for fuel tank location, hyd. Quick couplers are to hard to get to. That canopy looks narrow!?

[@tractorrookie]

Thanks for checking out the video. I don’t have much to compare it to, it’s my first tractor. No complaints so far! 😁🇺🇸🚜🍺

[@1o1carolina53]

What brand canopy ???

[@tractorrookie]

Hi 101! Thanks for checking out the video! www.rhinohidecanopies.com/

[@slip0n0fall]

Great review - have you had any issues with ground clearance with the BH subframe? It's one of the bigger things holding me back from a CK (vs other more integrated subframe designs)

[@tractorrookie]

👍🚜 thanks! I have on occasion touched bottom. As long as the hoses are up, it has not been a problem. Thanks for stopping by.💪😁🇺🇸🍺

[@Bigwingrider1800]

what is the regen??? This is what melted this plastic..

[@tractorrookie]

🚜😊 Yes, the regen is the system in the tractor that burns out all the leftover diesel particles. The regen only kicks on every 50 hours or so on tractors that are above a certain horsepower. It’s not a problem as long as I keep those loader arms up away from the exhaust during the 15-20 minute regen. Thanks for checking out the video.🍺🇺🇸

[@comodice905]

All Sud koreano...tractorez...son que tu...mahinney

[@tractorrookie]

Interesting!!! I had no idea! Funny how things are different in all over the world. Take care!!🚜👍🌲

[@IronSharpensIronPv27.17]

Outstanding review

[@tractorrookie]

😊👍 Hi Chris! Thank you!! I appreciate you checking out the channel and commenting!🚜🇺🇸🍺