N14 Cummins Engine Video of ECM Sensors

Explaining where The Cam Sensor, Turbo Boost Sensor and ECM are Located.
For ECMs, Sensor, Wiring Harnesses and more including FREE Electronic Troubleshooting, Call 810.653.6300 or Vist Www.N14Parts.Com ask for Terry Chron

[@wildstealth]

I think your missing about 5-6 sensors on your list

[@bigriem]

turbo boost sensor is on the back of the intake manifold in front of the firewall

[@techT9Xn9ne1]

What about timing sensor. Even skipped coolant temp oil temp and oil pressure.

[@breannachron392]

Thanks for the comment!

[@robdyrdek9293]

Great video!

[@michaelrichey1644]

I have a problem with 460 Cummings red head won't turn but 1500 rpm and no shutdown flashing

[@davelicata5046]

Intermittent miss fire #2 and #5 not all the time. Could be every day could be once a week could be once a month. Doesn't last all day when it happens. 5 min or 1 hour. It last for. Any ideas

[@unknown1129]

check the injector harness for: opens, shorts and high resistance's to eliminate power and ground issues to each of these injectors!

[@artemioriosjr8156]

I have a n14 celect engine and its leaking oil from the top exhaust little pipe on the head cover what can it be engine is running awesome just that oil leak

[@sswcubes]

Its normal. If it drips a little. That tube is a crank crase breather tube. Mines always done that and i had an inframe done about 350k miles ago. I've seen other n14 do the same.

[@ahmedamzh6360]

Is it possible to make an alternative resistance to the speed of a Caterpillar engine?

[@rickyharris5132]

Why dose my high temp alarm keep going off but my truck is not running hot

[@khalidasaad6142]

i have 2001 n14 celect plus when i hit bump sometimes get loss of power and check engine comes and off in split second code comes up power supplyelectrical fault what could it be??

[@truck4455]

Khalid Asaad I have same problem today You can help me.

[@richh4003]

Check battery connections

[@MrSehka77]

Have n14 select plus black top 460hp 2000 freightliner what's the difference between redtop ?

[@ernestoramon3700]

The premium package from factory cpl 2026 same as 2025 but not 9252

[@MrSehka77]

@@ernestoramon3700can I make this one 550hp if so just a tune ? Or what's needed ? Thanks for replying and help

[@kosiv]

I do not know if this still active. I have N14 plus and I have vibration. I have 120k mi on rebuild engine and replace clutch 3 times. Vibration. It is coming from engine side i can feel it on floor than on steering wheel. I replaces intake shaft and pilot and some other bearing, Replaces tires and wheels, did balance couple times and vibration is getting strong, along with that i have some high noise from fuel pump side and engine break has pulsing noise on high speed. I do not want to go to Cummins - they did this engine for $32k and when i ask for this noise wile the warranty was active - they told me it is coming from rear and it is not related with them.

[@envisionCamusa]

Please Update on what it was

[@unknownartist8342]

I got it 96 kw cummins N14 and be side of the cam /crank sensor is got another sensor any body knows what is for?

[@jcjc8274]

Please I replace even all my injector, fuel pomp, check valve, fuel line, and still no start with out staring fuel, now every time check engine come on, And I have to hit the fuel pedal hard for the check engine alarm get off. No mechanic found the problem but they charge me for the time, and the end all they said We don't know what is. PLEASE HELP, PLEASE HELP.

[@artemioriosjr8156]

Check the Wiring on the temperature sensor ground it helps

[@junejones4776]

where is the ambient temperature sensor?

[@bigriem]

ambient temp sensor is in the middle on the bottom of the intake manifold

[@ElmoZaPimp]

Where's the crank position sensor?

[@carlosrabelo374]

Radiator fan. Clutch. Solenoid work. Electric. Wire and. Sensor

[@mageshkumar6523]

CUMMINS ENGINE, MODEL: NTA-495-MG. The generator was on load, suddenly the rpm started to reduce from 1500 rpm to 1000rpm. then the generator was off loaded and stby generator was taken on load. while investigation found oil carry over in exhaust manifold.

[@roberttuttle5963]

i hope coolaint doesn t come out of that turbo boost sensor port hahahaha missed the engine speed sensor don't recall the exhaust temp sensor as ab input for the e c m its a O E M option on the n !$ model.

[@wanbyrodriguez5322]

Tengo nuevo albor de leba puesto y metales y ahun no tengo precion de aceite corecta ke debo haser

[@killwardanoki8847]

the cause of low oil pressure on N14 cellect cummins

[@zebra5591]

killward anoki plz need help with this too do you know where to test it? Need help asap lol

[@mageshkumar6523]

COULD ANY ONE HELP

[@julioflores3283]

En españ6

[@joseocho6588]

Traduselo