Replacing The Dash Lights In My 1993 Chevy S10

[@USA0312]

Gonna try and do this on my '91 S10, thanks so much for the vid bro

[@billclifton2808]

Why did you skip getting the panels out?? That's what I need to know

[@tomhueston48]

Hello everyone, This is a great video an a lot of help, Thank you! How ever I was able to remove dash panel with out disconnecting any of the climate control wiring an cable, first of all I had only about 1/2 inch of slack. By pushing the controls to the right a little I able to get a tool in there to remove nuts, the other side was easy to get to. Its a little work to get the dash panel out with all that stuff in the way, but I think it will work, mine did... I have a1993 S10 pick up...Oh yeah, I put LED bulbs in mine, Got them on Amazon, $13.00 bucks for 10 bulbs....

[@jameswarren436]

i have a 92 and a no dash light problem the heat control BS is what turned me back. one video said its got to come out (this one) another said you didnt have to remove it? of course this is a 93 mine is a 92. if you have tackled this issue please reply.

[@mariahjohnston1081]

Just used this video today to change my dash lights in my 94 s10 blazer!

[@matthewblalock4916]

I heard the house of the rising sun lol so awesome! thank you so much for making this. I have a 93 GMC Sonoma with the same dash. It has a problem with the dome light staying on all the time and none of the gage lights seem to work.

[@jls72753]

I have a 88 S10 most all the dash lights are burned out except one.. After watching your excellent video I think I'm going to pick me up a Chilton manual and some bulbs and give it a try myself... If that doesn't work I'll just use a little fashlight LOL

[@KnuckleHeadGarage27]

What's the part number so I can get the bulbs for my 85 s10 I have . ?

[@bobdickens4980]

Sup dude, replaced my lights. Didn't have to disconnect hearted controls, there is enough side to pull it out and swing it to the right and out of the way.. Sad part is I think the circuit board is bad....no lights.

[@darkvada3828]

Real late, but if you used l.e.d's try switching around, they are polarity sensitive!

[@mongooserider32]

And dang, 11 years Later I've picked up a 92 s10 !

[@CubNole]

You can gently tug on the HVAC column to give you more room to work with, the only downside is you'll hear your blend door cable (for hot or cold) stretch farther behind the dash, which will sort of kink it and make it difficult to push it up to hot or down to cold with a kink in the cable so THEN you take everything out of your glovebox, take that plate off back there in the back, and feed the cable back to the right (you can't miss it) and it will unkink and be perfect once again. :)

[@Atrocities85]

How do you get the push clips off without breaking it?

[@larryweary1274]

very helpful keep em coming

[@rockind78]

How in the world did you get the cable off without breaking the retainer washer? I am having a devil of a time with mine.

[@zoefaith120]

love, the video I got a 92 s10 5 speed and my dash lights are like all died and I see the pain. awesome in-depth video. how your old girl is still doing good.

[@NBH45304]

Alex, LOL I could have had this done in one evening, but thought it might make a good YT video. It took me two days to do this video. The worst part in my opinion was disconnecting the climate controls. Very tight space and little room to work. Nathan

[@1johnnyangel]

Where do I buy the bulb assembly?

[@ThrillaBytez]

Hey man just wondering how did you get the push on washers off? Without breaking them

[@NBH45304]

CubNole, I tried to tug on the cables to gain more length, but it was a no go. I would hate to even think about that cable breaking down in the dash EKKKK ! Nathan

[@hhhernandez15]

did you replace the blower switch?

[@jerrysimeone]

What service manual are you using please. Thanks

[@FuerzaImperialOficial]

what's the part number on the bulb.

[@brickwall911]

T10

[@reggiesanders1229]

So how do you make the chime stop? Where is it at?

[@Joe_Blo]

In the steering column. There's a rod that interacts with the ignition switch.

[@TxJonathan]

how do you remove the actual bulb from its blue housing?

[@NBH45304]

Hello, If I remember right I seen a video of an analog to digital dash conversion here on YT. I remember the wiring harness needed changed from this current one to the one for the digital cluster. Nathan

[@NBH45304]

Hello, Interesting to know that, thanks for the info. Nathan

[@rubberwoody]

can you replace this instrument cluster with the digital one in the olds bravada?

[@thelonewulf1000]

you can take those apart they are just soldered in but they sell the sockets on ebay so that you can put in any type of bulbs (incandescent or LED)

[@benshires9044]

How does the wiring unplug please i'm stuck swapping dashes in my 91

[@motorsportwarehouse5109]

thnk maybe you could of done the video, a little darker lol

[@jamesstephens195]

haha I went and did mine last night and now my cluster is DEAD haha. nothing moves nothing lights/.heres hoping something isn't lited up

[@alvarocazares7171]

Gracias por la información amigo

[@terrywhitfield4230]

Do you know the location of your turn signal flasher by chance?

[@scarlettthedog7264]

Terry Whitfield I'm pretty sure it's deep in the column at least that's how it is for mine

[@donnymayes6342]

I have a question what make ur dash lights not come back on it on a 93 chevy S10 how can I get the dash lights to come back on

[@donnymayes6342]

But I got just no dash lights everything else works

[@donnymayes6342]

Need help and what to check

[@donnymayes6342]

I put a fuse in it come on for a sec then blow the fuse what can it be

[@Robertschannel-1]

nbh45304 I have a 1993 GMC Sonoma Sle.. and my bulbs are blown.. and the green board screws won't come undone

[@otisussery9124]

Where is the FUSE box in a 1993 s10? The Brake lights are not working.." But I can't figure out where the fuses are

[@BillyPipes]

Underneath the driver side dash by the emergency break pedal

[@mikerscope]

same problem ended up getting my bulbs $14 @ Amazon Partsam 10 Pack PC168 LED blue. thanks though for the demo

[@dragnblazer]

gonna try this on my 88 s10 pick up and my 89 s10 blazer

[@lilRoBeRt91011]

maybe ill bring my 91 blazer your way and you can do mine to .lol

[@NBH45304]

Robert, LOL, yeah it was a pain in the ass especially the climate control. They really could have done something different here with the design. Nathan

[@wjwyd]

anybody have a link for the bulbs?

[@deeh9303]

I have a 89 Chevy S10. I ran into this problem. How ridiculous that you cannot go to auto parts store and buy the bulbs. So much ridiculous engineering on this vehicle. Wait till you have to replace the headlight dimmer switch. It just goes on and on . I will never buy another GM vehicle the rest of my life.

[@killers_are_quiet923]

Came here for help because I searched everywhere else and can't find anything on it, recently bought a v8 swapped 92 s10, but the dude played with the wiring. My question is does anybody know what color wires go to both the headlight switch and dimmer switch, he definitely switched shit around and it's screwing up my dash board. Any help would be much appreciated because this shits giving me a headache and I don't want just start putting wires where they don't belong.

[@whyme2818]

Shit I just bought a neon blue strip light and walla looks good and hassle free. I just basicly had to turn it off if popo got behind me lol

[@carolyngordin6091]

winshield wipers ehhh

[@bigboutdooraddictions8032]

Can't see anything that your doing but aging was 9 years ago lol

[@brickwall911]

20 seconds worth of content with 20 minutes of crap added

[@edgarcervera8698]

Lo pjeden hcee er en español

[@charlielo6516]

Edgar Cervera jajaja no mames