New at Spyderco - The Stovepipe™

[@Tb0ne212]

Love the blade! Too bad about the price. Fell right off the radar once I looked at the price!

[@Youtube-Censorship-Police]

dito

[@godse7en]

So why does it cost x2 the techno2 and chef ? Radiused handles… but still the same ti handle with no steel insert..like the design but the material cost dont add up.

[@ericthorpe5670]

The knife is absolutely gorgeous, but what an insulting price.

[@firstname3219]

Sals frequent extravagant trips to Hawaii are getting expensive for us Spyderco fans... Dudes grown a huge head over the past few years...

[@ericthorpe5670]

@@firstname3219 I get that the quality is still there, and better yet the QC is still on point for the most part. The materials are still top notch and the fit and finish as always are tight, but the overall cost does not equal the sum of the parts on most models.

[@firstname3219]

@@ericthorpe5670 I agrre 100%.

[@jacobpoucher]

@@firstname3219 it's probably Eric over Sal just saying

[@hawkshadowoseanacy5171]

Is this seriously that much better than a CRK? Yikes.

[@maxciofalo-guell3680]

If this was in the $200 range, it might be more compelling.

[@bsmithhammer]

Yeah, I'll wait for the pleb version in M390 & G10.

[@theKashConnoisseur]

@@bsmithhammer that's gonna be a long wait. Probably right around when they do a Slysz Bowie in VG10 and FRN lol. In other words, never.

[@modofatak]

M390 and 20cv are the same

[@bsmithhammer]

@@modofatak Almost the same. But I guarantee you Spyderco wouldn't be charging $600 MSRP for a M390/G10 version or if did, hardly anyone would buy it at that price.

[@aqvila11]

Why doesn`t have a stainless steel lockbar insert?

[@Southernknife_addict]

You don’t need one on thicker blades. And most everyday users never need one period but those manufacturers sure sell the sizzle huh

[@aqvila11]

@@Southernknife_addict Then why my xm-24 bowie has one?!

[@jacobpoucher]

More USA knives please 🙏

[@jacobpoucher]

@BB nice dog you got good taste in knives and dogs bro !

[@Paladin-el8jp]

Maybe I have a different idea from Sal what "crowned" means-- but that outer perimeter looks chamfered, not crowned

[@HDramboDwango]

Wow! I want that 6" Kukri one when available!

[@HDramboDwango]

6" folder!

[@zeuqramjj2002]

Lol for $600… you can get 2! Coldsteel Espada XL on their Amazon page.

[@Southernknife_addict]

Really nice knife. Made for hardcore knife enthusiasts for sure. Love mine

[@Mastermindyoung14]

I REALLY hope BBB's collaboration isn't this crazy expensive but...it's gonna be made in Golden with 15v. I'm buying it regardless!

[@sixsanchezNatchyawn]

the squarebody cleaver design rules 100 %

[@zeuqramjj2002]

Lol this is NOT worth 600$!!!

[@SailfishSoundSystem]

Inspired by Optimus Prime taking a dump.

[@WearilyCorrect]

🤣

[@snakehead324]

Cool design but wouldn’t pay half that for a toylike sub 3 inch blade.

[@CaffeineThrottle]

Hi wormhead, obviously you're unfamiliar with CQB.My sub 3" toy will have your femoral artery cut while you're still trying to get you hatchet sized blunt object into motion. Not everyone buys a superior"pig sticker" to play with paper and use as an identity.👋🎉🥱

[@FYLbingbong]

what a great looking design. very nice 😍

[@natureandknives]

Bro they lost me at design a butcher build 😆

[@ironsights7028]

Up your production. And keep it in stock.

[@barbar7746]

The marketing team estimated people are ready to pay such a high price for this knife..

[@modofatak]

Just because a company CAN charge more-than-fair-market for something, doesn’t mean they should.

[@donfierro777]

Thats...thats nice 😎

[@theKashConnoisseur]

Let's be fair about why the price is so high, it's not a normal Spyderco with FRN handles and VG10. It's a custom model brought into production, which ends up costing Spyderco an absolute heap in tooling and machining and training and all the other aspects of rolling out a brand new blade pattern. And then they have to know that it's not a mass appeal knife like the Delica or the Paramilitary. Less predicted sales volume means they need to charge more per unit to recoup the costs of bringing it to market. Also, let's not forget that MSRP ends up being higher than you pay at authorized dealers, and this knife is still 1/2 to 1/3 cheaper than buying a Bill the Butcher folder for essentially the same custom knife. If the price is too high for you, that doesn't mean Spyderco missed the mark, it just means you are not the person this is marketed towards, and that's ok. If you think good knives over $100 are silly, they have the Byrd line and the Value line. If you think $300 is fair for this kind of quality and materials, they make Sebenzas all day every day. If you want a collectable, limited production, high quality knife and the aesthetics and exclusivity of this design speak to you.... You are the person this is meant for!

[@WearilyCorrect]

If you take into account it is made by (probably) 12 year olds being paid 10 Taiwanese pennies a day then no $600 is not fair. The only Spyderco knives I buy are USA made because when I buy a luxury or high end item, I want my dollars to support Americans.

[@JEEROFUKU]

@@WearilyCorrect 🤝

[@theKashConnoisseur]

@@WearilyCorrect Taiwan isn't like China, they have actual work and pay standards. Do yourself a favor and at least read the Wiki article on the country before insinuating Spyderco is using child slave labor, come on lol. Spyderco's Taiwan factory always does the high end custom designed pieces and they have arguably better fit and finish than the Golden, USA knives. Also, Taiwan is busy resisting Chinese influence and pressure, so I don't mind my American greenbacks going towards helping them out. Lord knows we need more Democratic, US-favoring countries in Asia. Free Hong Kong, free Taiwan, etc etc.

[@Youtube-Censorship-Police]

@@theKashConnoisseur i might be wrong but i think you are wasting your time with this guy. i still think the price is too high, if reate (yes i know, china) can make integrals for $300 with the same or better fit'n'finish, then the stovepipe suddenly becomes very unattractive. also: my local gun shop has a sebenza with chad nichols damascus and wood inlays for only $50 more, which is honestly clearly a better deal.

[@theKashConnoisseur]

@@KZbin-Censorship-Police Man go grab that sebenza, that's a screaming deal lol. $50, nice.

[@markjg2275]

At $600.00 not worth the price , knives costing as much or more than firearms ,at a time when people are losing jobs from mandates and inflation this is not something I would buy speaking for myself.

[@theKashConnoisseur]

To be fair people who are out of work would be ill advised to even spend $300 on a knife. In fact, unless owning a new knife is going to put money in your pocket, I'd think folks out of work would be best served looking for more work rather than making frivolous knife purchases. And of course, if you just need a blade for work, any $10 gas station special will do just fine.

[@TheGunsNBlades]

Overpriced for what it isnt. 600…….🤪🧐

[@WearilyCorrect]

$600 would be a really good deal for an American made knife but a Taiwan blade... nah.

[@aqvila11]

It is too small Spyderco.Make one with a 9,5 - 10cm blade .Bill the butcher had a cleaver not a mosquito.

[@kraakvmaar1505]

Exactly👍👍

[@owawa1965]

งามมากครับ

[@813johnnfla]

It’s a fucking ti yojimbo lol

[@Krano229]

Nice, but for that price, I can get a few gallons of gas right now. :/

[@AlphaRomeoOneFive]

Got mine in the mail today and I love it. I realize not everyone will by the comments obviously. Not everything is for everyone however

[@vonWeizhacker69]

I like that you said Reeve Lock.

[@rpnp2]

They always said that

[@JEEROFUKU]

Nothing new. YoJimbo / YoJumbo is much better blade with a reasonable price tag.

[@lancemiller4647]

You do need to wear gloves to overcome the sharp edges & hotspots I felt after only a few minutes.. Also, I'd need to have more money than sense to spend $420+ on such a small knife..

[@kraakvmaar1505]

Thanks for deleting my comment in which I make fun about how small you made this so called butcher knife😂

[@hobosbite6580]

No

[@OTG414]

I’m not paying the same amount of money for a stupid pocket knife as I paid for my carry pistol!

[@pville5548]

$600 a pop. Well shows you Spyderco missed the mark once again. This is getting boring.

[@theKashConnoisseur]

It just means you aren't the person this is marketed towards. Folks get upset at the prices Jackson Pollock paintings go for as well, saying "my toddler could throw paint at a canvas too, this isn't special" but like a Pollock, the value in this knife is more than the sum of it's parts. In 5-10 years time, people who spent $600 on this exclusive knife will basically be able to name their price selling on the secondary market. And people who want one of the Bill the Butcher customs that these closely follow are being charged $1000-$2000 for the privilege. If you like the quality and materials but don't want to pay a premium for an exclusive, limited design, try a CRK Sebenza. $300, titanium handle and Reeve integral lock, good blade steel. Relatively available from the usual suspects, with a bit of luck. Great knife, looks a lot like many other knives out there, and there's a lot of Sebenzas in the wild compared to Stovepipes/Bill the Butchers. But that's why they're half the price or less.

[@cameratool]

Spyderco lost the plot about five years ago.

[@CaffeineThrottle]

Mine arrived today 2-2-22 I even paid for overnight freight.Anyone considering or maybe on the fence, it's worth every cent.👍👍😉P.S.this ain't no blah bugout!

[@813johnnfla]

Naw bruh Why the fuck do knife companies feel the need to copy each other and come out with new shit every year… for that bullshit crk gets my money and respect

[@hafertr1235]

it's not a copy it's a collab, and why wouldn't they come out with new stuff each year?