Aye!! She’s a beaut!! Can’t wait til you get her in and break her in for a good review! Really glad to see you back!
@Goodezilla2 жыл бұрын
Thank you Andre!
@Green_Streets2 жыл бұрын
Nice selection! This is the most well equipped clutch set I have come across. The metal alignment tool is a must for multi plate clutches! When torquing down the pressure plate I continually check to make sure the alignment tool slides smoothly (just slightly) and that it also bottoms out. This ensures everything is square and provides the least resistance when installing the box.
@Goodezilla2 жыл бұрын
Thank you, yeah the TSB also recommended doing that. I'm hoping it goes smoothly during install!
@Green_Streets2 жыл бұрын
@@Goodezilla the only bummer was all 30 or so of those PP fasteners. Also, I had some Aussie friends recommended using red loctite vs the blue that comes with it. That said, they were well over 1,000whp.
@Goodezilla2 жыл бұрын
@@Green_Streets Thank you for the heads up!
@kolapodasilva58382 жыл бұрын
Thanks for the unboxing. I have the same clutch/flywheel that the shop the car was in sold me on. I never saw the unit before it was installed
@Goodezilla2 жыл бұрын
Glad I can help out 🤣
@jimbostir50042 жыл бұрын
You know what?,, that’s a real nice bit of kit. Lots of clutch for the cash for sure. Congratulations on your new purchase! Is it heavy? I’m looking forward to seeing your review on driving in traffic slowly and giving it a bit of a hard time. It looks awesome. Thankyou for that.
@Goodezilla2 жыл бұрын
Yeah it's pretty heavy...like 40-42 LBS or so according to the shipping weight
@blaqjac212 жыл бұрын
i have a similar sized 8 or 9 inch organic twin in my evo x and i love it . my buddy has the six puck and another has the hydo 8 inch fat ceramic puck design . well all love them
@mindlessr332 жыл бұрын
Nice! Glad I could help :)
@Goodezilla2 жыл бұрын
Thank you 😎🤘
@samheal49832 жыл бұрын
Nice kit Justin, just about to change plates on my os giken £665
@steveh31302 жыл бұрын
Nice addition to the build differently need upgraded and know that you can go and play without worrier. Watch your vid getting me pump up to get my part install so I can enjoy this year, been lazy installing. Hope to meet up sometime.
@Goodezilla2 жыл бұрын
Thank you man. I hope you get yours up and running soon!
@stuckinkaos95tbirdlx2 жыл бұрын
If you havnt thought about it. Upgrading the slave cylinder to larger size. I cant remember the actual size. I think your stock one is 3/4 and bigger one is 15/16....
@Goodezilla2 жыл бұрын
I have a nismo unit on there currently. I'll look into it
@eprohoda2 жыл бұрын
enojyed~ excellent ,see you on my side,
@Goodezilla2 жыл бұрын
Thank you!
@mikedawg87052 жыл бұрын
Hey what oil pump do you have on there? I know you upgraded to the super tech spline drive conversion correct? But is it an OEM oil pump? I’m looking to do the same thing so just curious. I currently have the OEM oil pump no spline drive setup. If I go with a high flow oil pump I need the larger sump right? Thanks man
@Goodezilla2 жыл бұрын
Hey, I have a N1 oil pump with the Supertec Racing Spline drive gearset. I don't have an extended sump, but I do have the Tomei oil baffle in the sump.
@mikedawg87052 жыл бұрын
@@Goodezilla do you think the oil restricter is necessary to control how much oil is in the head?
@Goodezilla2 жыл бұрын
@@mikedawg8705 yes, I believe it's a good thing to do
@andrewstrudwick67782 жыл бұрын
Did you look at the Nismo twin? That's what I bought. Not the competition one but the next one down.
@Goodezilla2 жыл бұрын
I looked at them, but from what I saw they wouldn't hold my power and/or have room for more power to go up.
@andrewstrudwick67782 жыл бұрын
@@Goodezilla the competition is for 740+hp while the twin supercopper mix is 670hp
@Goodezilla2 жыл бұрын
@@andrewstrudwick6778 right, I make 620 whp and wanted something streetable and not right at the cusp of meeting the limit. I'm sure the nismo is good too.
@christianherbort38322 жыл бұрын
🥰🥰🥰🥰🥰🥰
@edayala91712 жыл бұрын
What happedn got tired of the os giken?
@Goodezilla2 жыл бұрын
it's slipping...check out my last video
@edayala91712 жыл бұрын
@@Goodezilla my bad I remenebr now You are gonna feel a big difference bro
@IILaymanII2 жыл бұрын
Hey Goodezilla go check out the channel "The Northern Garage" he has just put one of these clutche sin his car too :)
@Goodezilla2 жыл бұрын
I'll give it a look
@taznz12 жыл бұрын
Good video, strong accent. He was smart enough to replace rear main seal while he had everything apart.