New HART Tools 70 Piece DRILL & DRIVE Bit Set (I CAN'T BELIEVE WALMART SELLS THIS!)

[@adambomb7331]

The biggest benefit to decent bits at Walmart was when they were 24 hours. With limited hours, I'll be heading to HD

[@pyrosquid3653]

Hart has been turning out good products at reasonable prices. I've bought a lot of Hart products in the last 2 years and I find them to be convenient and easy to use. Most of what I'm doing is on the weekends and only takes 10 minutes to 2 hours.

[@DeeRawb]

I don’t leave a lot of comments. But, your ability to be engaging while providing subject matter expertise in an efficient manner is refreshing. I’m subscribing.

[@VCGConstruction]

Thanks Dave, appreciate it!

[@delliott777]

Very sweet of you to review the Hart tools on Valentines day.

[@BostonBorn]

Even though I already own a cordless drill that I’m pleased with, I picked up the Hart impact driver & drill combo. What I love about them: the impact driver is smaller and, my opinion, more manageable for someone with smaller hands and the drill is 1/2 inch. Most cordless drills are 1/4 inch. I passed on this kit but, picked up the 3 piece 6 inch impact driver bit set. How many times have you encountered a tight space and had to finish driving a screw with a manual screwdriver? I always run into that situation and it drives me nuts! There are some things I like about this kit...maybe it’s worth it for those items. 🤷🏻‍♀️

[@bozzy7946]

I love the hart drills, the brushless impact was how I removed a frozen water heater element. Great tools for at home use.

[@chuckmiller5763]

I just realized a few days ago that this is the original Hart Hammers brand and logo. Hart was the first with the California framer hammer. Funny thing, walmart sells "Hart" hammers too, BUT not the original Harts. You have to go elsewhere for the good hammers.

[@Japone81]

The OG hart hammers last a lifetime

[@danielhughes5932]

They have an awesome framing/stripping 23oz i think i might try though

[@thatkindagirl777]

Just put down 500 sq. ft. of 1x4 IPE a type of Brazilian walnut which is the 2nd hardest of all woods for those who may not know. The contractor sold the homeowner on 1x4 instead of 5/4 stock because that was what was available from a certain supplier he goes to. A camo gun hidden install requires minimum 5/4 thickness (1 in actual) and they werent routed to accept ipe clips and i sure as hell wasn't routing all that stock, there was already a 3/32 thickness discrepancy between half the order so i was already dealing with that putting me behind schedule. So instead I was face screwing 2.5 inch T10 stainless trim heads. I started with the free GRK driver that comes in the box and pre drilling a 1/8 pilot followed by setting it with an impact gun. I spun every tip off i had in the 3 boxes of screws by quitting time. The next morning I switched out the impact for a reg cordless drill to drive the screws smoothly and to hedge my bets i also bumped up my pilot to 5/32 and a dewalt T10 max fit driver, i went through 2 drivers by the end of the day, better but still no good. After a run to the hardware store I grabbed 3 milwaukee shockwave T10 drivers and those outshined dewalt and GRK brands. I did spin 1 off so far but it lasted me all day and some of the following day so im extremely pleased with the quality of the shockwave drivers. It wasnt an ideal application but it came out looking great and im proud of the work i did

[@JCulpepper73]

Great content Vince! I already own some Hart impact bits because of a previous review you did. The machined Phillips #2 fit the screw heads so well.

[@rolandmcneal3806]

Thanks for the video I was looking to buy just this set today I wanted to see some reviews on it you helped me a lot thanks.

[@toolhead147]

I agree, don't like the ryobi bits that much. Not the best quality. Even back in the day when I had my ryobi tools I was getting milwaukee bits.

[@MissMolly3377]

I was talking to a representative from Hart at Walmart. He said the company that makes Milwaukee tools makes Hart tools...🤷

[@sakibc1787]

Same company

[@UToobSteak]

Yes, TTI. They also make Ryobi, which the Hart stuff is close to

[@nonamegiven5744]

“You’ve gone done diddly done it” LOL 😂

[@VCGConstruction]

🤣🤣

[@georgfloydvictims]

Thank you guys for all the hard work you all do putting these videos out for everyone. Love you guys.

[@Lyle-1999]

Nice to see a Hart review! Good stuff Vince!

[@phillipcuster8036]

I don’t know about other companies but Makita make a magnet that goes around 2 inch bits to magnetize it

[@boosted2.4_sky]

If its got a 1/4" drive ... Put it in the impact driver....🏁 Good Stuff Vince....👍

[@Todd_S]

I always hit the like button before I watch the video because I know it's going to be good. I recently got a new Milwaukee Shockwave 120 piece drill/driver bit set for only $24.88 to use with my 7 year old Milwaukee M18 drill and impact driver kit. I love it!

[@TheDmantheman100]

Ive got 10 year old m18 drill and impact kit that still is better than half of the newer budget stuff, the batterys have lost a bit of power but they still get it done. Im impressed, ive been trying to kill them for 3 years now so i can go get some new brushless ones.

[@RoguePlanetStudio]

Got a Ryobi drill from home Depot and a drill bit set from Hart to put some patio furniture together and the bits stripped. The regular ones in the 70 pack, switched to the titanium ones and they were better. Picked up a basic set of Ryobi.

[@mjc8761]

Happy Sunday VCG! Thx for review appears they are good for DIYers 🙂

[@peacefulosprey7140]

Best review of the Hart Drill impact kit! 👌

[@larrymixer144]

There are very old quick change bit sets that came out with the notch cut in the end that mounts into the quick change collet that mounts into the drill chuck the same as the impact drive chucks of today. Most of the higher end new impact driven bits have a reduced shank just above the business end of the bit for prevention of breaking screws and other fasteners off with the impact action. Milwaukie has the best rated ones followed closely by Dewalt. I often wonder would I rather loose a screw in a piece of wood or end up replacing the broken screwdriver bits. I live on a farm and it's not like a run to the shopping center when you need things were talking about a half hour drive one way. You need good tools that will hold up to use and sometimes a little abuse.

[@rtgray7]

I use Kobalt XTR power tools and I only purchase XTR bit kits which have done well for me so far BUT I always keep Milwaukee Shock-wave and Dewalt on hand because they have been put through their paces through their paces and found to be dependable.

[@marauder2525]

NO Harts here (mostly Dewalt); however, I am impressed that it does not lose it's bits and attachments like I have seen Ryobi do.

[@minnesotaman3]

hey Vince have you came across a new bit set with a non fitting phillips number 2 also can you test harbor freight brands bauer (18.99 for 35 pieces) , Warrior (5.99 for 32 pieces) , hurcules (19.99 for 45), storehouse (7.99 for 80 pieces)

[@gixxer_killa]

Clicked for the review, but soon as he started talking I knew he was a South Philly guy! Yo Cuz Def subbed & liking everything on this channel!!!

[@casperchazz]

Thanks for all your help

[@doeskerbyrock]

I feel like this is the exact same as the Ryobi set I bought my mom or Christmas. I got her this set and gave her my old Gen 1 M12 drill, so I don't have to constantly take my tools when I go to her house and she asks me to do something. I haven't been there since Christmas, but I feel it was if not the same really close. I kinda assumed that Hart and Ryobi would probably share bit sets and replace labels. Can we see a Hart vs Ryobi bit challenge?

[@zzmalone6720]

Awesome review. You did a solid job on this video! Have a great weekend. 👍🏻

[@VCGConstruction]

You as well Malone family! 👍🏻

[@ogcabbage6213]

Thanks brother for not getting back after 3 ,but still like ya end up with milwaukee m12 fuel combo kit after dawalt and kobalt I return them all and finally ended up with what I still have good stuff.

[@blaineturner1434]

Probably a great kit for home for the weekend DIY

[@robertsneed3]

Very nice review on these Hart drill bits and drill. You done didly done it now !!!

[@VCGConstruction]

🤣🤣👍🏻

[@logansmith2581]

That kit is an exact copy of a Ryobi kit that’s been around for a long time, sans the green plastic. The Ryobi kit even had the nail set. I got use out of it around the house, and if your in a pinch this kit would suffice. But with the deals and steals always around on the big 3 kits, I would just stock up on them when they are on sale.

[@brianvalastro7283]

I just got a hart 4ah battery for my impact and drill set cant wait to try it out. My set only came with one 1.5 battery to begin with, for the 100$ i paid for the set its gonna do anything id like it to. For them jobs it cant, i have a old scool plug in 10 amp dewalt.

[@MissMolly3377]

Well, I have this same driver and kit, and It wore my #2 right down. I don't know why it went half way through my 2 x 4, and it would not drive any further, for some reason. I tried a couple screws, however, I had no problems with the driver bit that actually came with the impact driver. It worked great. I couldn't believe that that particular drill bit, in the kit, just continually ate out the head of my screws.

[@dannydeakins4938]

I use big M and Dewalt, work at said store and when I break, loose or fugger up said bits I’ll grab a hart. They haven’t let me down for what I use them for.

[@ddewit1969]

Hey I am a carpenter from Holland we have a lot of different brands Festool and Milwaukee are very good en many more but my favourite is Wera greets from Nederland 🇳🇱

[@thenuclearnarwhale9188]

they did the same thing like harbour freight warrior drill bits where they advertise titanium nitride coated as titanuim bits

[@Aepek]

13:35 having the wobble means, don’t have to rock drill back and forth to cut material😉 Also, Vince, you made me laugh pretty much entire video, from what, we’re saying and how were acting. LOVE when you review bit sets, cuz it’s just “great” to hear what gonna say😂 Thanks for a fun vid and a laugh, needed it✌🏻

[@VCGConstruction]

Thanks Aepek, hope you’re doing well! 👍🏻

[@graywolf2570]

Happy to see more hart stuff

[@AntonioClaudioMichael]

Great video @Vcgconstruction

[@markbuckeye]

@ VGC Construction. FYI the Milwaukee 3 & 8 M18 two batt pack for $169 was finally at my local HD...just sharing, been trying to buy it for weeks order always cancelled.

[@ernestwalden3894]

I been thinking about trashing my hyper tough tools Even though they all still work. I even used them on the job sight as well. But I am going to replace them and was wondering about buying the craftsman cordless toos. I don't have the money for milwaukee or dewalt so what do you guys thank about craftsman ?

[@johnstringer7168]

Save ur money and keep the tools lol. Not worth it

[@stephenleepmg113]

Craftsman, Kobolt, Hercules, or Bauer. Any of these cheaper line are okay. If I was just starting out I would go kobolt. 5 year warrent and it is easily replaced at any Lowes.

[@sakibc1787]

If you go with heart go with Brushless, that motors are strong

[@samuelstufft2073]

Only dewalt and Milwaukee. Still the best bits.

[@UToobSteak]

I've used the heck out of my Hart hole saws over the last few years

[@davidperry4013]

Diablo should enter the screw driving bit game.

[@Majestic-Gaming]

Thanks for the upload this morning!

[@VCGConstruction]

👍🏻

[@shooter_ric5722]

If I can, I usually buy Makita bits for my Milwaukee M18 drivers haha. They just hold the screw head so nice. If not Dewalt is always of sale and sometimes I can find Milwaukee bit assortments.

[@yaniana23]

this was really interesting , thanks for the guide .it was like getting a new toy ...oooh what does this do ,oooooohhh thats what it does and what does this one do....thanks for showing me

[@NoChillAustin]

12:35 you didn't have to call me out like that 😭😭😭

[@adammiller4735]

The biggest reason for the extra wobble on the spax screws when not using the included bit is because there’s an extra little indent in the spax screw which the included spax bit fills by having a little extra piece on the bit. This is for the torx bits of course.

[@Lyle-1999]

@vcg construction, can you review the Hart STACK system mobile tool box? Would like to know your thoughts for DIYer point of view???

[@ronaiosa126]

I’d like to see that too, since it looks exactly like its Husky counterpart

[@Enigma00017]

This is helping a lot. Im a dewalt guy. But dang Hart you got Hart. Give it a good bit set and lets see what happens. :)

[@matryan3532]

Vince is the goat

[@VCGConstruction]

Thanks Mat, appreciate that!

[@Michael-t3b5b]

The cut in the shaft on the spade bits does not necessarily mean its impact rated. Several drills are made with no real chuck just a 1/4 inch drive to accept bits and drivers with 1/4 drive ends. I have a Craftsman drill/driver set that I’ve had for over 25 years. First thing you needed to do was insert the 1/4 inch adaptor into your corded or “brand new” cordless drill then all the other items in the case would fit into that adapter. Unless the manufacturer states “impact rated” I would be careful about assuming that to be true

[@andrewmiller5145]

From what I see that is a fair set for a homeowner and diyer

[@420banshee7]

Anyone know if kobalt will come out with a pack out type system to attach to the rolling tough box that my 5 piece xtr set came in because it seems like the perfect base for such mentioned system especially with everyone else doing them I've been kinda bummed they haven't came up with something like that yet. I absolutely love the xtr kobalt tools and would be nice to have attachable cases to hold fasteners and bits etc. I would really love to see something come out very very soon for that setup in the kobalt blue and black colors before I have to break down and buy the craftsman system or likewise. Any info on this would be wonderful and helpful to me or if someone could pass it on to lows as I'm not the most computer savvy type person, thanks .

[@franciscocv1995]

I got one of those hart bits it was good works and took the abuse I put it through. That I did alot. But that I did a door dead bolt. And used 2 of the masonry bits. In drilling in to 1970 foundation in a a cellar. But it too so long I had to used alot of support. But good for a quick buy

[@Xmatador20]

Which impact driver is the best for diy ? Best bang for you buck ?

[@GabrielGuzman18]

anyone knows which is the best drill driver set?all I have is an impact driver

[@mattalford3932]

Everything you've tested is more than enough for any home DIY project. Buy a drill bit sharpener or do it by hand, and you'll get more use out of your drill bits.

[@deeheych1101]

Lol it's a crazy value but I've always been skeptical

[@mtanyctrainatlantamartatra7164]

When are you going to check the Hart seven in a quarter cordless circular saw?

[@PowerToolsForBeginners]

Thanks Lets chalk up a win for Hart Drill Bit Kits!

[@rufineaaron3123]

Sabes cuándo presentarán nuevos productos milwaukee???

[@powerpanda557]

Always happy the get the notification.

[@TheNorthlandWorkshop]

My motto with drill bits in impact drivers is “if it fits it ships”.

[@brotheradam]

Many DIYers only need to install a door handle on a door so, the hole saw is around right size..

[@miguelbravo4666]

Will you be reviewing the hart stack system??? 🤔

[@georgebonney90]

I really appreciate the info gentlemen, thank u👍

[@VCGConstruction]

Thanks George, we appreciate it!

[@lilbigdaddy3042]

My favorite torx bits are the ones grk makes

[@d.sack2727]

I agree, all bits need magnets or sleeves.

[@RetroReflux]

Hart is owned by the same company that owns milawauke, just some food for thought. Different engineering teams but just throwing it out there

[@stephenleepmg113]

Hay Vince and hello VCG There are just so many more better options for less money 💰 and maybe a few bucks more Bosch bits and tools with free batteries, or 12V Milwaukee on sale with Milwaukee bits and sometimes free batteries, etc. My point is dollar for dollar there are way more better options.

[@davelopez5355]

How would you compare this to Kobalt bits or kobalt xtr? Or craftsman

[@kc0lif]

i love ryobi and milwaukee and dewalt. informative channel.

[@corycarpenter5873]

Sooooo how do you use sockets with the drill?

[@dillonvaller4388]

Aloha, definitely try to fit testing the milwaukee plum line & dot laser some day, love the video one of my coworkers has the Ryobi bit set @Vcgconstruction

[@jonathancantrell1422]

I own hart impact and drill and my drill has died on me but impact is still working just fine just something interesting I thought

[@Xedgehog1]

Very few of these companies actually make the "lower end" parts. Craftsman, Kobalt, Ryobi, etc...are distribution companies. They R&D, design, market and SOURCE the tools, but other companies MAKE the bits, blades, sockets and hand tools.

[@andrewwithers530]

I have Ryobi and have tried the bits and drivers. They are trash. Looking to get Milwaukee sets now.

[@kirillkhizhnyak3749]

Bro , I love your vids

[@chaitern6075]

I feel like if a tool or bit doesnt work well its not the tool i blame the assembly line. Who ever worked at that moment and was putting together the set i purchased messed up somewhere or was not having a so great day so it was more or less half assed put together.

[@RICHARDSONMRD]

I Agree 👍

[@AntonioClaudioMichael]

Awesome to see another notification

[@sho4504]

Its literally quality over quantity. I use a lot of bosch professional bits and drivers and i dont bother with those 200+ kits because more often than not you want be needing half of it or half of it wont be fit for purpose. Better to spend a bit more and get smaller sets for what you need, like a set of professional brad point bits, separate set of tct masonry bits.

[@rickycervantes4926]

I smashed the like button for the good luck 👌

[@zeth8300]

Nice video keep it up vince honesty is the way 👍 hart is replacing black&decker.

[@Omnivorous1One]

Is that really a solid titanium 3/8 drill bit or a titanium coating?

[@Hj2098-b8u]

Very Nice brother!!!

[@rh3309]

What happened to TTR? Is it canceled due to covid?

[@GodGunsGills]

Harts new multi charger is nice! I did a video on it. Also hart has the heated jacket!

[@nikosuave4779]

I almost got this one but, no counter sink

[@ramranch6696]

Will you test their saw blades?

[@wesleemiller]

Great video.

[@zail2238]

I wanna get my dad a good heavy duty impact drill. Any recommendations?

[@ManCaverTools]

you da man Vince

[@xtx8133]

I'm a inpact guy I hate drills but there's a place for them

[@refreshlandscapelighting4813]

Yo VCG! Another great video! I have a question/unrelated. I’m in the market for a core drill Dewalt for landscape lighting hardscapes.... which core drill would you recommmend?? Thx!

[@danielhughes5932]

I basically just use these cheaper kits as consumables. We're always training guys that have never used a drill cant swing a hammer or drive a bolt. Of course 90 percent of them are lost and the other ten percent destroyed from misuse. the amount of Phillips bits and 5/16th/tap con drivers that are stripped because 18-25 year olds are afraid to push forward and DRIVE things in is astounding. So i keep a few contractor grade things in my personal tool box but use the cheap shit unless absolutely necessary around others.