New Ruger RXM - What's so special?

Unfiltered MAC on Twitter: / mac_arms
Join Patreon and support MAC! / militaryarms
Political Comentary: / @secondlegacy
Follow and support us on Utreon!: utreon.com/c/m...
Follow us on Rumble: rumble.com/use...
MAC T-Shirt Store: ballisticink.c...
Modern Gun School: www.mgs.edu
Challenge Targets Discount Code: MAC556 (www.challenget...)
We take a look at the new Ruger/Magpul RXM 9mm pistol.

[@roul3688]

I envision Magpul coming out with all sorts of cool accessories for the chassis system

[@Gringo111R]

I can envision these things dropping down in price to $300 and it will be a great first gun or backup for anyone. Certainly better than a PSA Dagger!

[@stevennunez6013]

The Glock store has a detailed video of how to dissemble and reassemble the rxm .

[@chrisb9478]

Gun deals showing as low as $337, great deal.

[@Osprey1994]

Be cautious using Gun deals like that. Often times the lowest prices are from sites that may or may not deliver you a product. Always do your research on who you are buying from.

[@Shadow__133]

@@Osprey1994Yeah, most times they also hide shipping and other fees on the deals listing, making you waste time.

[@chrisb9478]

@ True, but if it’s a long standing gun store website, I’ve heard of. It works great, you buy online & they ship to your local FFL to pickup. I’ve done this several times, no issues at all. Plus using a credit card gives you a little insurance as well.

[@ElMayo31]

After fees thats over 437

[@chrisb9478]

@ Well, don’t buy it. Gun desks often gets me to a good price on the exact gun I want. If my local shop is too high.

[@ThePoorBoy]

If the Gen3 is to become the AR of pistols, the RXM is the pistol that seems most likely to accelerate that. And it's probably going to be available in California soon. The Ruger LCP was recently added to the roster. The RXM already has an LCI, so the only other requirement would be a mag disconnect. California would be an enormous market for the RXM for obvious reasons. I plan to get one if it's added!

[@jjwolff7658]

I’m loving mine. 800 rounds no issues. Shoots great. Quality fit and finish. Did a little polishing and after break in the trigger is nice and slick now. I am carrying it at the moment.

[@danovercast9282]

What’s so special about this Glock “clone” is that it’s being made by a company that has the manufacturing capacity to punch Glock’s lights out. It’s not a boutique outfit or garage startup, it’s the 800-pound gorilla of gun making.

[@Shadow0fd3ath24]

Combines all the best features of the Glock 19, PSA Dagger, and Ruger optic plate stuff... then they added the FCG swappable frame system with an EVEN BETTER grip shape and angle than the Dagger, plus with that Magpul EXCELLENCE. Got mine for 355 shipped BRAND NEW

[@PaulAmerican]

This is the product Glock needed to build which would have won them the military contract over sig. While Glock is stuck in the box other companies are making better Glocks.

[@bradenmchenry995]

They didn’t even include an optics cut for mhs trial. Hilarious

[@cosyfoot7867]

No it wouldn’t have. Sig won the contract because of price alone meaning Glock would not have won. Glock met the modularity requirement by having backstraps. The contract wasn’t for a removable FCU. Sig met the modularity requirements by having different grip module sizes. It has nothing to do with the FCU and honestly a regular Glock would have been better for maintenance because there are so few parts compared to the 320 FCU. I do agree that this is a better Glock though and as someone who’s shot many thousands of rounds through a Glock 19 or 34 I picked one of these up. They’re very good guns, especially for the money. I just hope the aftermarket takes off on the grip modules as the rest is already there. I hope they also release a flux style brace for these. The real reason I bought it as I have so many true Glocks and didn’t need it for carry.

[@MR.IceCreamMan93]

Lmao

[@johnviera3884]

There’s a lot of misinformation spread around on the Sig vs Glock contract I think Sig should have concentrated more on their quality control and engineering than securing a military contract that military contract will expire but the shit stain on their name is eternal

[@PaulAmerican]

@johnviera3884 there wasn't a problem with the manual safety models like the military versions. The drop safe issue was on the no safety model released for the civilian market. If they just renamed the m17/18 for the civilian market there wouldn't of been a issue and the p320 would have been the best selling duty gun since.

[@UncleDanBand64]

Yep, I will probably get one. Seems to be a nice pistol.

[@guardianminifarm8005]

Many thanks

[@darthonly5664]

Bought one and it feel better on my grip and tighter group than my old 19 so I put it on my EDC rotation.

[@oneijack98]

Bought 2 of them. I really like the feel of it and have been very happy with it. The trigger feels better than my G17 gen 5. I see Magpul just dropped the standard frame in 4 colors now but I really want a 19X grip length.

[@JR15A2]

The RXM trigger is just a Gen3 Glock trigger with a more comfortable shoe. How do you reckon it feels better than a Gen5 Glock trigger? I've never heard anyone say they prefer a Gen3 Glock trigger over a Gen5. I hope they come out with the standard-length grip sooner rather than later because the compact grip that comes with them disappointed me after I put some rounds through it.

[@oneijack98]

@JR15A2 more comfortable is the key word there. I didn't have to spend more money on it unlike most my glocks. RXM is a good all-around gun and cheap enough to toss in a car console as a backup and forget about it until shtf. That is what I got two of them for.

[@chrisduncan440]

And it doesn't have the ridiculous glock hump.

[@tdhawk7284]

Ole Gaston Glock reminds me of Henry Ford: Both were entrepreneurs and trailblazers in their respective areas. However, as the years went on, they became resistant to change. Other companies copied their work and improved on it. Consequently, they lost market share.

[@Shadow0fd3ath24]

Gaston isnt and hasnt ran the development in 15+ years

[@mic187x2]

Glock hasn't lost its market share

[@Shadow0fd3ath24]

yup Glock is still on the Model A and needs to move onto the V8 Model B/48

[@jammerlr7780]

@@mic187x2Absolutely incorrect. The only market that Glock has maintained is the LE contract market. They are bleeding massive amounts in the civilian market. Their continued resistance to adjust to the market is driving that exodus. They absolutely do not have the commanding market presence that they once did. No matter. There are plenty of other companies that are more than willing to step in and fill that void.

[@danielgregory7200]

​@@mic187x2, From LEO contacts I know. They are pretty much 50/50 with M&P. And Sig is making inroads into Glocks market share. As many departments pistols are now well worn. The main reason they have kept their market share is price. It is quite expensive to switch to a different platform. Even if it's much better. When departments have stockpiles of magazines and spare parts. And, their armorers are trained for that model. The majority of shooters that don't want to switch. Have never really fired anything else.

[@danielgregory7200]

We have one in the shop. Sold another already. My buddies shop has sold 2. Saying it's a Glock clone. Is not really accurate. As the grip angle is better. The sights are better. The trigger is better. It has a chassis system. The ergonomics are better. And, the grip texture is better.

[@mundoh5947]

Sorry people that are hating on a glock clone that works and is compatible with Glock 19 parts and slides are idiots 🙄

[@JR15A2]

Glock haters are a very vocal minority. They always chime in with their opinions whether you want them or not.

[@the12gaugeshotty]

No, people are hating on Ruger because they approve of gun control. F**k Ruger. "The best way to address the firepower concern is therefore not to try to outlaw or license many millions of older and perfectly legitimate firearms (which would be a licensing effort of staggering proportions) but to prohibit the possession of high capacity magazines," Ruger said in a letter to Congress in 1989.

[@MichaelSisley-fw3xr]

Don't worry about them. Just be who you know you are. Last time I checked, the haters don't pay the bills for you, me etc. The people that tell me my gun is crap, I must get this or that, they live in an alternate reality. Guns are like underwear. Everyone wears what they wear, what is best for THEM. Same for socks, all clothing, how you cut your hair, or don't. Life is good.

[@danielgregory7200]

​, I don't think it so much people hate Glocks. It's just there are many, many companies making better polymer framed guns. We haven't ordered on for the shop in over 3 years. Because nobody asks for them.

[@davidwiechecki9205]

What'll be cool with this is all of the grip frames that will be produced at reasonable prices. No one makes a reasonably priced grip frame for the Sig pistols.

[@josh656]

Or be Steyr and win the lawsuit against Sig but make no products for their M9-A2’s

[@theoreticalfitness7701]

I bought one for my daughter for her 22th birthday. I ended up getting another one for myself. Having a slide not locking on the last issue, but made some adjustments and we'll see this weekend. Just wanted to throw this out there, but glock is discontinuing their 25 which is in .380. According to Lenny Magill, you can put the 25 upper on the 19 and use the standard 9mm mag and convert it. This would essentially mean that you could put that same 25 upper on the Gluger and convert that to .380 as well.

[@moshedayan9049]

This is my next with the new mec-gar metal Glock magazines

[@steveshoemaker6347]

Thank for the Ruger PXM excellent review Tim...... Old F-4 pilot in my 80's

[@17cmmittlererminenwerfer81]

You're at a cocktail party, and the host mentions that there's a fighter pilot among tonight's guests. You: "I'd like to meet him. How do I know who the fighter pilot is?" The host: "Don't worry, I'm sure he'll be around to tell you soon enough."

[@Nefville]

I held one of these at the gun store yesterday and I was really impressed with the quality of it. Everything felt really well done, I even checked the inside of the barrel because I've heard there have been some issues with tooling marks or defects with some of the earlier RXMs but everything looked perfect to me. I'm just waiting for them to do one with a threaded barrel, I don't want to drop $300+ for a barrel if they're just going to do it factory in a few months for a few bucks* more than the standard RXM.

[@warfumble]

Nice, thanks!

[@pjbarney9580]

very cool idea... now they just need to tweet it to the newer generations of glocks!

[@Cheka__]

I like that jacket.

[@b.g.4277]

Good gun, but get your hands on a CSX E-Series. A compact that is truly different than what most companies are rolling out. New trigger and modularity looks great.

[@haus-drache7019]

nice german army camo

[@lancekilkenny721]

Gota love flecktarn!

[@haus-drache7019]

@@lancekilkenny721 me german

[@lancekilkenny721]

@@haus-drache7019 Gutten Tag!

[@haus-drache7019]

@@lancekilkenny721 danke ist Abend 18:45

[@Shadow__133]

I like the classic 1940s ones better.

[@bradenmchenry995]

It’s the gen 6 that glock refuses to make. We all know Glock is not doing shit for the gen 6. Better to support companies that actually want to make a compelling product

[@JR15A2]

Why would they when they already make the most popular pistol on the planet?. Quit crying and whining about it and buy something else if you don't like it. It's not like we don't have more choices than anyone would have ever dreamed possible in years past.

[@FELiPES101]

kinda hard to beat the gun, an extra grip for style, a case of 9mm, and tax for under $1000

[@jackwright9102]

Thanks 😊

[@LindaSuarez-f9c]

Your channel is a real KZbin gem where every video is a little work of art. Keep up the great work 🍋🐰🌛

[@BrokeDadBuilds]

I have a RXM and its a steal for something not a glock but glock reliability. Definitely beats the Glock price too now.

[@MB-lr5fp]

Does the loaded chamber window cause carbon, etc to accumulate in the lens of the optic?? This was a problem with the M&P pistols. S&W omitted this feature from the newest version. I'm surprised Ruger included it here

[@mikewithers299]

Yup! My m&p always smoked up my red dot. I took it off. I'm good with irons for defensive carry anyways.

[@stickfighter1038]

If Magpul comes out with a PDW chassis for the RXM that would set it further apart.

[@MichaelSisley-fw3xr]

I think the price of this gun will be very appealing. As you said, two reputable names, so there is a warranty there. Yes, the economy sucks currently. Nobody is exempt from inflation. Ruger will sell a lot of these guns. The number one reason I got a Glock when we were able to get them in America was the reliability. Wiz bang features, I do not care. I just want it to operate fine when and if I need it. Fast forward and guess what, now everyone has a clone Glock they make. That is fine too. More choices, more competition for your dollars, you get a cheaper cost. If I needed a gun, I would buy one. Right now, I am concentrating my money towards food, taxes, and utilities.

[@goodcitizen64]

Good review 👍

[@trynsurviven2440]

Right now they are just over four hundred in my area of Oklahoma. I’m hoping that will change in the near future.

[@chrisb9478]

Gun deals showing a shop has them for $337!

[@trynsurviven2440]

@ nice😎

[@Osprey1994]

​@@chrisb9478From companies that may or may not even have one.

[@jammerlr7780]

Got mine in OKC for 399.

[@Mrgunsngear]

🇺🇸

[@mofoq]

now big question is will ruger allow other companies to make grip parts for their RXM (considering their FCI being a patented part)? or better to go with that open-source gen3 FCU setup?

[@trilliamogdlocog4986]

Is it drop safe😂

[@kenjiwenji]

Spreading the message from The VSO Gun Channel: NO MORE COPS IN THE ATF!!! And honestly if Pam Bondi doesn't fall in line, we're gonna have a fuckin' problem!

[@GilLopezPadro]

Why not detail the red dot mounting options with the pins?

[@gvii]

Pretty cool bit of kit there, and the price is darn fine as well. It's a been an interesting stretch for firearms the last couple of decades. A lot of really neat stuff and ideas floating around out there. Been a few turds too, but seems a little less in that direction overall. Quite a bit of good movement on the optic front too. Just irritates me because no matter how good the sight, or how fine a dot it has, they all look like an exploding star to me thanks to my stupid eyeball. It's just not fair, lol...

[@macdude04]

Am I the only one that thinks 3 magazines minimum should be the standard? I’m not knocking the RMX, but the industry as a whole. We pay a lot for some of these tools

[@TimHarperW5TAH]

You can buy them

[@macdude04]

@ gee thanks, I never knew I could buy more magazines. I’ve just been buying the same gun over and over keeping the magazines and selling the gun

[@macdude04]

@@TimHarperW5TAH dummy

[@why-be-normal7014]

It’s a good gun but u also have a 1000$ red dot on a 350$ gun is not what most are going to do

[@brianmanning9271]

And?

[@Aron-79]

Respect ✊🏻

[@Osprey1994]

I've seen some issues start to pop up now that people have put some rounds through them. I'm going to wait for a bit and hope that I avoid any problems. PS. I've noticed some major inconsistency with the trigger. Some people say rolling break, some people say it has a defined wall. The one I handled had a clear wall.

[@JR15A2]

It's just a Gen3 Glock trigger with a more comfortable shoe. Don't overthink it. Like a Gen3 Glock, some are better than others, and they can be tweaked or replaced with an aftermarket trigger bar/shoe and connector.

[@1nfamyX]

I wish ppl would post more of that stevens visible loader reproduction

[@iamAwesomo1994]

But does it take glock mags?😅

[@danielgregory7200]

Yes it does.

[@travismassengale4622]

I love the video. You should try the Bear creek arsenal grizzly.. I'm curious 😂

[@savageone9568]

Its funny to me how people hate the glock so much but make tons of CLONES of the glock. People are IGNORANT and these guns PROVE IT. FACTS

[@dnet8180]

The designers of this gun must have just bought a Glock tekmat and presented it to Ruger

[@larryschmidt3594]

This seems to be a PSA dagger with a chassis. PSA should have done the chassis system. My Dagger with a cut slide cost me 250 bucks when they first came out. The grip angle is what beats out a Glock along with price for all of these clones.

[@jammerlr7780]

I considered the Dagger the. realized they kept the godawful Glock grip angle. Ruger wisely chose to go with a more conventional angle. I spent a good amount of time with rental and borrowed Glocks from friends but just couldn’t get the bad taste of that grip out of my mouth. Ruger changed that with the RXM and I couldn’t be happier with mine.

[@larryschmidt3594]

@jammerlr7780 the Dagger does not have the same grip angle. I have a Dagger and a Glock. That was the big thing with the Dagger, to change the grip angle.

[@caddilacjim]

I own a M17 and only changed out the grip module to a Wilson Combat don't plan to use a different frame.So this Ruger only innovation to me is using cheap Glock mags.

[@danncairns5546]

my only complaint is that the grip is way too small for my hands, but then again how many companies make a gun for guys that are 6'5". must be why i gravitated towards the full sized pistols.

[@JoeRLewis-nz9zj]

Yep, and just like it's blood brother, it ejests spent cases all over the place!😊

[@badas45]

Id like a dagger comparison... Does anyone else smell burning toast?

[@damienthomas6655]

❤❤I think this will do really well ,,and if i was given the choice of a gen 3 or 5 glock ,,or this gen3 Ruger=Glock or Rock i would chose the ROCK or RXM ,,,which is probably better than an original gen 3 Glock and cheaper than a new gen 5 Glock ,,,they will sell possibly tons of the RXM's ,good job Ruger and Magpul

[@Libertarian_Neighbor]

This gun goes for about $1200 in California if you can find one off roster.

[@jake45790]

😂🤣😂🤣

[@tafino]

The actual RXM??

[@JR15A2]

That's insane; I wouldn't even consider paying that much.

[@Shadow0fd3ath24]

you can get tthem for 335 online, smuggle them from arizona

[@Shadow0fd3ath24]

buy in arizona and take there to ca

[@218cortex]

Of course Ruger products are known for having rough edges, but I'm impressed with this. I mean, it's cheaper than the Glock 44... which is a notoriously janky .22 that still doesn't have OEM 15rd mags all these years later. Good stuff.

[@willthompson9073]

Glock stuff in my opinion is kinda getting long in the tooth I'd always like getting more guns into hands of first time gun owners and them to be reliable but there's so much around that price point of a glock is better that's what's neat about this but glocks have never fit my hand well in fact I really didn't know any better until I shot a cz or a 1911 or 1911 style gun and realized oh the glock doesn't fit my hand at all

[@marktownsend8187]

Want it see a g26 side frame!

[@travismetcalf7509]

Isn't your trigger pull test of the RXM pointless, since the lower was not the RXM lower that you tested?

[@TuttleScott]

looks like he changed it back before doing that but I did think it strange to do a review on a gun and change half the parts because he liked them bettter especially when the upgrade involved a whole other serialized part.

[@RainMakeR_Workshop]

Bit of an odd question for you. But I'm an artist and I'm looking to design a Bullpup rifle and would like the input of someone who knows guns and likes bullpups. What features would you want in a bullpup for special forces use? I'm thinking 5.56 with ambidextrous everything. But I'm not sure what mag release location to use, where the fire select and safety should be and what design would be best, should the ejection port be side-ejecting? forward ejecting? downward ejecting? Apparently gas and brass in your face can be an issue with side-ejecting and if its not side-ejecting, where would be the best place to clear chamber obstructions? Should I add a port to access the chamber? I've also heard downward ejecting like the RBD has issues with burning peoples arms and falling into their lap in some positions, and forward ejecting like the F2000 can apparently clog. I also have some functional questions that would be in notes as I can only design the outer appearance, but I want something that reads as functional to someone who knows guns. I'm thinking of saying it has the trigger and mechanism together with a floating linkage bar like the Kel-Tec RDB so it doesn't have a bad trigger, should it have a progressive trigger? Would that even work with that linkage? Plus any ideas you could suggest would be appreciated since you're familiar with bullpups, their use and the criticisms. Any design features you'd recommend would be welcome too.

[@sogerc1]

I wonder how long until rear serrations become obsolete.

[@shanetigue8048]

Also does the strike grip except the trigger module?

[@orangemountain457]

4:55

[@Clembassador]

If you live in the north central midwest you could be /Fleet/ and get one for 4 bones, it’s certainly better than /Farming/ your way up to the cost of a Glock 19 MOS which goes for 6.2 bones.

[@mghegotagun]

I wonder... if I got very creative with a dremel, maybe one could make magpul's frames take standard glock gen 3 internals...

[@Taprack13]

Glock hating has become a fashion statement.

[@mechaet33]

What is the grip angle? Standard Glock or 1911ish?

[@danliberty734]

So, taking the comparison further, P80 and Dagger lowers should also work with it, as well.

[@Shadow__133]

Using the word "work" for a Dagger is a stretch 😂

[@___meph___4547]

​@Shadow__133 Have loads of PSA shit and it all works just as well as my multi-thousand dollar guns.

[@TimHarperW5TAH]

No.. .

[@randynelson9620]

Wow....anybody think Tim likes the Strike frame better than the Ruger because It's a Primary Arms exclusive and they pay him??? Hmmmm..🤔🤔🤔🤔😂😂😂😂

[@Dr_K545]

Don't get the drone shot, lol.....Jason

[@michaeldaltonsr8954]

Don't kno about others, but when I went shopping( w/$$$$$ in hand), and found a GS that allowed me to handle/inspect a RXM, then, when I racked the slide, the magazine RATTLED! RATTLED!!( Like a plastic bucket falling down a flight of stairs) I thanked the GS clerk, laid the RXM DOWN, and walked out( w/$$$$ in pocket), SMH, cursing Rugger/and sayin WTF, Magpole?? You were FOUNDED on better chit than dis!!

[@Shadow__133]

It's a feature, makes it easier to track where you are pointing in the dark 😂

[@Aaron-pb5xy]

I had to hit google translate to understand this.

[@michaeldaltonsr8954]

@@Aaron-pb5xy Learning b uh gud thang.

[@JR15A2]

So, like a Glock?

[@ParrotTactical]

So what can a Glock do that this can’t? Seems like a better version of the exact same thing for cheaper.

[@lookfat]

Glock has proven reliability, this has no history whatsoever.

[@ricks.1092]

Not sure if it's a better version per se. Don't know what materials were used in the Ruger. I'm not a fanboy of any firearm. But what metals are used the process in how the metals are shaped. These things are important. It's the same argument with AR's. They look and shoot the same. But are they equal? No. Because cheaper models use different metals. 6061 aluminum buffer tubes over 7075 aluminum. And 7075 is twice as strong from 6061.

[@ParrotTactical]

@ I think ARs are a good example though. We don’t really see 6061 failing… we’re just all told 7075 is better. ARs are expected to meet accuracy standards whereas no one even bothers with pistols. With many stories of pistols going 40-80k rounds if the RXM lasts even half that it’s more than most people would shoot in a lifetime. And just getting through that 20k rounds on the low end would cost $5,000 in ammo not to mention range fees. I hear the concern but I’m thinking ruger may have a real winner here and the price difference may be all profit in Glocks pocket for their brand name.

[@Cavalier_survivalist]

Im a old country boy who gets sht from ppl bc i love ruger. Everybody's a glock freak nowadays. Dont have one and you couldn't give me one.

[@armstrong2052]

Cool. I still ain't buying a rugock.

[@Smitty_Werbenjagermanjenson]

I prefer "Gluger" or "Rugpul"

[@armstrong2052]

@Smitty_Werbenjagermanjenson You eat what you like, and I eat what I like. -Yukon Cornelius 😉

[@Stevee1505]

I have an RXM and want to throw a Radian After Burner on it, and according to Radian it will fit, but i've seen several videos saying that information is misleading and the Radian comp wont fit. Has anyone seen or heard different?

[@thomastatum4974]

Is the mag release reversible? One reviewer said it is NOT.

[@JR15A2]

It's a Gen3 Glock clone, so no. That didn't come along until Gen4.

[@EvendimataE]

because that is based on gen 3 glock, does that mean its automatically california legal?

[@damienthomas6655]

I wonder if Glocks new trigger will drop into it ??

[@jeff7.629]

Waiting for the 10mm version.

[@westonturner-gt4mu]

Best millimeter

[@bearray57]

Its a "Gluger"!!

[@petrkarv]

That new mounting system that Glock has is stupid if you can't adjust the rear sight.

[@JR15A2]

Why would you need to adjust a fixed rear sight on a Glock?

[@marknixon8604]

Can you get it with a thump safety?

[@davidwarring1572]

Just is ordered me a hell cat pro with Ambi manual safety. Don't think the Ruger has a Manuel safety, most micro sub compacts don't offer the manual safety think the shield plus has a model with manual safety but it's tiny and sucks to accuate.

[@irwin808]

Is the grip angle more 1911ish than Glock?

[@JR15A2]

A little, but it's closer to a Glock than a 1911.

[@frankbrowning328]

How is the chamber support? Is it a fully supported chamber?

[@MTNmyMAG]

2001 called and would like their Glock complain back

[@frankbrowning328]

@@MTNmyMAG Chamber support or lack thereof is a concern for those of us that reload and want to assure long case life and proper support for +P loads in 9mm

[@larrycaro1333]

Cool

[@DB.KOOPER]

SO Ruger made a 3rd Gen Glock and Trijicon made a Holosun 509T... how original. I'll care when/if they make a true G19 sized 10mm like Glock refuses to do. G

[@sentraselify]

Strike industries

[@okcjoesos]

Why does Trump sound like a lion except when he’s talking to Netanyahu or about Israel?

[@JR15A2]

What does that have to do with the Ruger RXM? Are you lost?

[@okcjoesos]

@ It doesn’t I’m venting

[@erroneous6947]

I agree but this has nothing to do with guns.

[@LukaszBlake]

It will cost as much as Glock when sold in California. If ever. What’s the point of this when other options are available in other states

[@anthonycoffee7683]

Still not buying it as long as the ATF exists. I don’t need one that bad. The ATF loves it because it serializes a part that is harder to work around. Glocks will still be the king of illegal activities, unless they steal them. Serial numbers mean nothing to criminals but I’m not getting involved in any of it. Go bug the real criminals and leave me alone! If I need a gun, you’ll deliver it someday.

[@PutTheLimeInTheCoconut]

If you buy a Hi-Piont for self-defense, you dont value yourself or your loved ones live..

[@rustynail7866]

Took a Hi-Point and a Sig to the range. Sear broke in the Sig. Hi-Point fired every time.

[@robertnickell8498]

I've had a Hi- Point 40mm for years, absolutely NO problems ever, oh and it's not my only fire arm.

[@matthewf6852]

Watch the IV8888 Hi Point series from like 15 years ago. They're heavy, ugly, single stack with bad triggers and terrible sights, but they work, and they're indestructible.

[@aliceakosota797]

Hi point knows what it is , the Sig is pretending to be something else​@@rustynail7866

[@akforge]

“Imitation is the sincerest form of flattery.” Another GLOCK clone. 🤢👎

[@alfredjr2k556]

Because it looks like Glock

[@Tom-cp6yj]

What's the point of this if you already have a Glock like most people do?

[@milkspank9140]

What’s the point of continuing to produce Glocks if most people already have them?

[@TuttleScott]

@@milkspank9140 so you can have 2 :P

[@CooldonkeyB]

Schöne Jacke

[@jameskelly7782]

new security guard favorite.... affordable.

[@nebretseh5107]

Cali price will be 550….🫣😳🙄🤪💥

[@hvymax]

I think the Palmetto Dagger is the primary competition for this. Palmetto has a ton of possible combinations!!!

[@mikewithers299]

I love the Dagger grip so much I carry it more than the G19

[@Shadow0fd3ath24]

this is even better than the dagger, and i say that as a dagger fanboy. Just wish these had the dagger slide cut options then theyd be PERFECT

[@danielgregory7200]

Nope, it's a straight up Glock contender. That already comes with all the upgrades. Glock refuses to do.

[@taylo226]

So many bots in the comments