New Stucco finish over existing

New Stucco finish over existing.
Colored stucco textures.
FYI, folks, here are all the basic tools we use and recommend on Amazon's website.
www.stuccoplas...
Live long and plaster hats, shirts, and other cool stuff. www.livelongan...
Kirk Giordano Plastering Inc.
Send pictures to Jay or myself at our sites below for immediate bids.
www.StuccoPlas... Kirk’s website.
www.GiordanoPl... Jason’s Website.
Here is some background wisdom from lessons learned from our past about stucco color changing and new finishes applied to every type of home known to man.
• Stucco Resurfacing Stucco home with new smooth plaster.
• Stucco Resurfacing Spread stucco a year later.
• Stucco Smooth resurfac... Smooth stucco over rough stucco.
• Repair bad stucco patc... Stucco color finishing correctly.
• Make rough stucco smooth Make rough stucco smooth.
Hello folks, Jason and I start all our videos by explaining what we’re going to do and how we, as professional installers and applicators of exterior lath and stucco or interior plastering, decide on the method of completing our task.
Remember, there are many ways to skin a cat.
Our method used to achieve our goals come from over 40 years of applied experience; folks can depend on us for sound advice no matter how much I may ramble about my past experiences.
Special tip, type your question into our channel, and like magic, a video will appear to explain how it’s done.
www.StuccoPlas... Kirk’s website.
www.GiordanoPl... Jason’s Website.
Thank you all for watching.

[@steveo6631]

Hey!!!! Just found your channel - better late than never they say.... I'm an EIFS/Stucco contractor in New England and enjoy the vids I've seen so far... Thanks for the content...

[@StuccoPlastering]

Howdy Steve, welcome my fellow plasterer.🥳

[@OLDAVE1000]

Kirk, I appreciate access to years of experience. You are helping me accomplish many more things at my home than I thought I could do. My next project is lime plastering a bathroom and shower. Our quality of life is improving from pros like you and your crew. You guys are are a God send and your work is important. Kindness and gratitude in all things! Thank you and all the best, Dave

[@StuccoPlastering]

Morning Dave Dude, that style of yours is working brother, thank you. 🍺

[@jdh23h]

Another great video Guyz !!! Kirk u are the Man!! Keep it up 👍🏼, makes me wanna re texture my house immediately 🧤

[@StuccoPlastering]

LOL, only if it's necessary.🍾

[@Fukuiraptor1]

Kirk’s the best. I like your style brother.

[@StuccoPlastering]

Howdy Fukuiraptor, LOL, I like your style also my friend.😏

[@asalisaterfield6007]

Kirk! Thank you for another post! You are the MAN!!!

[@StuccoPlastering]

Howdy Asali, thank you, my friend. 🍾

[@michaeleaston1819]

Kirk, I've been watching some of your videos so I can help a friend put in a new window and stucco repair and matching will be involved. I was happy to see that Your a bay aera guy like myself and that you had a union life just like me. I'm local 713 and eventhough I'm retired I still pay my dues. Your videos will be a big help and I've really enjoyed watching them. Its always a pleasure to watch a master apply his trade. Your a virtuoso my friend. Blessings over you and your family Sir.

[@StuccoPlastering]

Evening Michael, thank you for those kind words, my friend.🍾

[@mannycontreras5266]

Kirk I remember seeing you like ten years ago and always doing an awesome j. My point is that work has kept you in a good fisic. Always like washing your videos kirk. Thanks for always explaining the ins and out of plastering.

[@StuccoPlastering]

Howdy Manny, Thank you for those kind words. We still perform the rough, hard, dirty, dusty, and sometimes dangerous work of the world as it’s easier with the right mindset. What is the right mindset? Habit, what habit? The habit of training our minds and thinking thoughts like, wow, I’m getting paid to work out and play outside or with other similar positive thoughts. 🍾

[@justa2049]

Even when I'm not plastering, I'm usually watching it. 😆 Well done!!!

[@StuccoPlastering]

Howdy Roast Dude, thank you, my fellow plasterer. 🍾

[@jameszulu7120]

You're the best Kirk. I've watched a bunch of your vids and was able to install and stucco new vinyl windows on my house. I used all the tricks you show and they came out great! Now all it needs its a new color coat. Come down to Fresno Kirk lol.

[@StuccoPlastering]

Howdy James Zula, try my buddy Jake Johnson. Jake's the best in your area.707 660-1422. Meet him in this video, kzbin.info/www/bejne/haLFgpWaet6Gias/ New smooth stucco over rough stucco. Jake. 😉

[@jdh23h]

As a structural concrete man. I used your videos to learn the different textures of drywall and stucco . Added another tool to the tool box . Thank you Kirk Top G for the great instructions

[@StuccoPlastering]

Thank you my friend in the concrete business.😉

[@mrgaddafi6291]

Great job Kirk 👍

[@StuccoPlastering]

Mr.Gaddafi, thank you.

[@gorankovacevic3604]

Great people....i wish you all good from Serbia....

[@StuccoPlastering]

Howdy Goran Kovacevic, thank you my friend from Serbia.😉

[@T.E.P..]

it's great to see a pro go. Hope you and the family have had a perfect summer and the glorious SUN has been shining on all of you

[@StuccoPlastering]

Evening Thor, the sun did beat us up a couple of times lately as we had a heat wave, however, I happen to like 87 degrees for fun and work. 😉

[@kyletetro6418]

Looks awesome Kirk an jay those cementitious finishes are amazing so intriguing watching u float bringing out the sand love it

[@StuccoPlastering]

Howdy Kyle Tetro; glad you enjoyed watching. 🍻

[@clintprice2123]

Great job as usual! You all make it look effortless!

[@StuccoPlastering]

Howdy Clint, thank you, it's all about enjoying what we do.😉

[@davidmuise3960]

At the end, wow big family, respect that 👍

[@StuccoPlastering]

Howdy David, you want names and relationships? My nephews and nieces, sons and daughters, plus my sweetie. 💃

[@oldworldchris4187]

Great video, I like this way to finish a house, you don't have to cut boards around everything, and it is maintainable if done right!

[@StuccoPlastering]

Very true! Chris, maintenance-free, like a brick.🍾

[@Freshmillz]

Hi Kirk x-16 is a hot color right now everyone is choosing silver grey anyways good job like always!!

[@StuccoPlastering]

Hey Leo, Silver Grey does go with just about everything.🍾

[@jdh23h]

Did some stucco repair on a chimney for the neighbors house. 104* in south Florida. Thank You 🙏 For your videos

[@StuccoPlastering]

That is awesome!

[@marcleblanc7021]

Wishing you and the family a Very Merry Christmas and Happy New year!!

[@TheBigsmiles62]

Thanks for sharing your knowledge, brotha you guys make it look easy but doable

[@StuccoPlastering]

Our pleasure!

[@fbarr8540]

Lucky man, love your videos

[@StuccoPlastering]

Hello Mr. Barr, thank you, however, luck is earned or is the residue of being well prepared. And it's far from easy.😉

[@gladiator22666]

Hello Kirk , another interesting and informative video 👍

[@StuccoPlastering]

Howdy gladiator Dude, thank you, just another day at the office for us.🥳

[@EverydayPatio]

Knowledge!

[@StuccoPlastering]

Exzackory.🍻

[@ec6678]

Really enjoy your videos, learning so much!

[@StuccoPlastering]

Cool beans Daddieo, that's our job, teaching all.🥳

[@davidmuise3960]

Looks great Kirk

[@StuccoPlastering]

Hi David, thank you, sir. 👍

[@Stuccomandan]

That was a good job!

[@StuccoPlastering]

Hey Dan, it was kinda fun.Good morning.

[@brendanhealy3]

Let's say this is being done on hot days: 1. Pressure wash the wall 2. Apply bonding agent 3. After bonding agent dries, wet wall again (?) 4. Apply stucco color coat Is that right? You're the man Kirk

[@StuccoPlastering]

Yes, the amount of water sprayed to cool off a wall depends on the heat of the day.

[@cipher2]

8:54 = Kirk is a legend!!!

[@StuccoPlastering]

LOL, thank you

[@tyroneclarke1666]

You boys did a very nice job on that home. Hey Kirk. I thought you got rid of that big old work truck. A recent video with the beastie out front hehe. Must say that truck is a one stop shop loaded up. Cheers from Perth 👍🦘🇦🇺

[@jeromeduffy9270]

It's got it all. Don't remember him claiming to get rid of it 🤔

[@tyroneclarke1666]

@@jeromeduffy9270 He put up a video about the truck saying it didn’t conform with CA emission laws or something and had someone in another state interested in buying it. That’s why I’m confused he still has truck. Cheers mate.

[@chrisscullynz]

Youre like my favourite 47th person and we've never even met.

[@StuccoPlastering]

Howdy Chris, you are too kind my friend. Hopefully, in a year, I'll drop down to number 46. Stranger things have happened.😉

[@marcogutierrez1476]

Hello, I appreciate your knowledge! What’s a product I can go buy in a big box stores to re stucco my house. I have a very bad orange peel too lumpy. I’d like to skim over it to a sand smooth finish. Thank you again for your advice and videos.

[@StuccoPlastering]

@@marcogutierrez1476 Google, “Plastering Yards in my area” like, Westside Building Materials. Then buy a medium or heavy sand finish stucco, such as La Habra.

[@mannytadeo4604]

Amazing

[@steelarmour]

Love it. Thank you

[@StuccoPlastering]

No problemo

[@SalettaRocks]

Kirk, Love what you do! If color coating over naked stone/ pebble dash, would you need to use a binding sgent? The surface being already rough stucco should bond to the new coat, correct?

[@StuccoPlastering]

@@SalettaRocks Pressure wash and roll on a bonding agent, better safe than sorry. Nothing adheres to a dusty surface.

[@SalettaRocks]

@@StuccoPlastering thanks for the response. I watched some of your other videos and now understand that the porosity of the existing surface is important also. So, I think the approach will be to first clean, bond, then match the texture and even out the surface, apply bond then the color.

[@rcraigelliott]

As always a pleasure to see you work and teach us all. By the way, odd question but the woman you are with at videos end, is this your wife Jackie because she looks very different?

[@StuccoPlastering]

Hi Robert, LOL, She was my girlfriend, we split a year or two ago; The new lady is a soulmate from another era, we just happened to meet again in this lifetime. As far as the last girl was concerned, like Janis Joplin sang, she’s looking for that home, and I hope she finds it. kzbin.info/www/bejne/pmjPl4yAgJJsjck/. 🥳

[@als4817]

Is there a different red tape used on vinyl vs wood window frames? Is this what we call vinyl tape ? Great video,, this one captures some very important details,. Thanks !!

[@steveo6631]

Here in New England its called red stucco tape... It can stay on a window frame for many days, and doesn't leave the sticky glue residue when you take it off like duct tape would...

[@donaldnicoletti6520]

Hi Kirk, love your videos; I have a three coat rock lath ceiling hole to patch, and was wondering if I abut to the original plaster with diamond veneer if I’ll have a noticeable seem? Or do you think I should use 20 minute mud and taping compound to feather it out afterwards? I’d prefer to keep it close to Integrity to the original finish which is about 3/8 rock lath, 1/2” structolite and 1/8” of veneer. Thanks in advance and you should make a patreon id be more than happy to throw you some cash for all the knowledge and help you provide! Thanks

[@StuccoPlastering]

Hi Donald, you can use any of these materials, including structo-lite. A wet trowel makes structo-lite smooth but takes practice. Want more strength, use a lime finish plaster such as Diamond or Imperial made by USG. You might have to google plastering yards near me to find this lime plaster.🍾

[@mybleachhouse]

I color coated the font of my place in just base 100 and it looks super fly tnt . I would do sections in cloudy cool weather but last winter I waited months for a cloudy day and not one came....sunny california...yippie, so I had to finish the last section before the summer heat. So as a result there's one cold joint that is faintly off from the rest and was wondering if I should fog coat it or just leave it well enough alone.

[@StuccoPlastering]

Howdy Bleach House Dude, congratulations on your success by watching and paying attention. FYI, you can apply color coats in 100 or more degrees of sun and heat, but if you do, make certain that the walls are soaked early on in the morning and kept moist or drenched until ready to color. It may day a day to dry, but this prevents bleaching or ghosting, It takes practice. To answer your question, I'd leave it alone, as you no doubt will be the only one who will notice it, and a week from now, you won't, Cheers. 😉

[@ab-qr8fo]

Hello Kirk I had a question. I have smooth stucco on my house and want to paint it but I wanted to fix all the cracks on it. I see on the videos you like to use Mor-Flexx but I’m afraid that it has too much sand for my smooth finish. Do you recommend I use Elostopatch? Whatever I use I want to make sure that when I paint the walls that it’s not shinier on the cracks due to the product used in the cracks

[@StuccoPlastering]

Sorry, I don’t know what elastopatch is.

[@sheliabolwahnn9786]

I love the fade of the stucco caused by the sun. However, how can I lighten my stucco color under my porch that does not get any sun to help match?

[@StuccoPlastering]

@@sheliabolwahnn9786 Not really, the sun will naturally lighten it as the years go by. You can fog coat it but that’s takes lots of training. One could even fog coat it with a teaspoon of bleach mixed in 2 gallons of water. But this also requires a master at fog coating. It would be like accidentally pouring Clorox bleach on blue Jean pants then washing them if one try’s this without a lot of time in. You can simply paint it😉

[@davidsobodos484]

In an older video you demonstrated that you needed to thin the weld-crete with water for a thin color coat overlay or that finish would spider crack and look like alligator skin as it dries. I know that Larsons say not to, but your demonstration showed otherwise. Do you still thin the weld-crete??

[@StuccoPlastering]

Hi David, you would have to watch this video again or read the description for that answer.🤔

[@mynameisalin2948]

Where's Louuuuuu? Haven't seen him in a while now, he's my favorite character 💪💪

[@StuccoPlastering]

Howdy Alin, my brother, Lou, is still having foot issues, he down to working part-time, the other time he's at his full-time occupation of drinking of spirits. I'm not talking about the holy Spirit's. Like, Arnold Schwarzenegger said in terminator, he'll be back. 🍻

[@nicholasponsen5620]

Hello Kirk. I am plastering a huge block wall and it's too big for me to finish in one day. Question is is it ok to plaster the wall in multiple sections? And if so any tips or tricks that I should do for a good outcome?

[@kirchdubl1652]

Great stuff, question: How much is to put new stucco over old stucco for square foot ?

[@StuccoPlastering]

@@kirchdubl1652 Absolutely no idea, you’re thinking in terms of buying carpets, I think. There are too many variables to the cost of stucco.

[@JoseLopez-i2q]

If I want my house stucco house painted instead of this what paint is better,elastomeric or acrylic paint?

[@StuccoPlastering]

Elastomeric is acrylic based.

[@IEoutlaw909]

Hey Kirk! Is there a way to “burn” already installed smooth finish exterior walls more? Walls are white but I’d like a more “suede” look on the Santa Barbara finish. Work was done over 3 years ago

[@StuccoPlastering]

@@IEoutlaw909 No as it’s already set, you can try spraying, or rubbing bleach on the walls as bleach will lighten almost anything or discolor stuff. You didn’t hear this from me. 😉

[@IEoutlaw909]

@@StuccoPlastering haha ok I will try out a small area of the house see how it comes out! Thanks appreciate it

[@StuccoPlastering]

@@IEoutlaw909 Spray it lightly at first with a Hudson sprayer or backyard sprayer used for spraying bugs. Wait a while then if you light the lightning effect you can go heavier. It’s like poring Clorox bleach on blue Jeans.

[@IEoutlaw909]

@@StuccoPlastering ok so spray let sit then scrub or wipe until desired effect is achieved right? The company that did the stucco asked me if I wanted it burned more or kept more white, at the time the burn looked good but after it cured there’s more white with little grey or burn areas. I like the suede look I have it but it’s very light

[@StuccoPlastering]

@@IEoutlaw909 you don’t need to scrub and areas as that won’t do any good, in fact that would not give the desired effect your looking for. Try wetting the wall with your garden hose, then once it’s moist, not dropping wet, spay the bleach in various areas then wait until the next day to see the effects. Clorox bleaches all colors big time except, you guessed it, white. So experiment a bit before you go hog wild.

[@jerryriggins123]

I have a maintenance free stucco finish and i went to fix some cracks and underneath it has a heavy duty elastomeric paint with cracks.If i wanted to change the color do i need to have the new finish and elastomeric paint removed to do it right or do you just go over everything with new color.

[@IK-jz1ic]

Hi Kirk, what dilution ratio did you use for the weld Crete? Can you apply stucco within a day or 2 of applying the weld Crete?

[@StuccoPlastering]

Apply weld-create full strength as it says on the cans, however, when we professionals use it for bonding stucco colors will sometimes dilute it for our needs. To complicated to write up. kzbin.info/www/bejne/n5qmaXuLgLGsftU/ my experience with, Larson’s, Weld-Crete bonding agent for adhering to new stucco finishes.🍻

[@robertcraven1771]

Thanks for the video! Is the procedure the same for changing the color on an EFIS/dryvit type of surface?

[@steveo6631]

I've been an EIFS contractor for 32 years in the NorthEast... With Dryvit, STO, etc systems your options are wash and re-color with their color coatings... STO has a paint called "Lotusan", which is really incredible stuff - a little pricey but so good... To change texture you need to rte-skim the whole place with base coat and re-finish with new color/texture... Hope this helped and hopefully I didn't butt-in with my 2 cents... LOL

[@StuccoPlastering]

Howdy Robert, as a rule, dry-vit is coated with acrylics. Acrylic stucco finishes kind of means a rubber top coat. Yes, this system would work, but you're better off applying the other Dry-vit primer and acrylic stucco that come with all dry-vit finishes.💃 kzbin.info/www/bejne/mmTWeYVugKlkbMU/ Stucco Flex acrylic for retaining walls. kzbin.info/www/bejne/jpfIZpdoq6iKoMk/ Acrylic stucco primer and finish applied explained. kzbin.info/www/bejne/rJLcnIuNdth5eaM/ How to apply acrylic stucco. kzbin.info/www/bejne/aGmWdZaie9Z3rc0/ Acrylic stucco for duck pond stucco-flex. kzbin.info/www/bejne/hHSzYZqDZ8mEjLs/ Acrylic stucco for waterproofing flexible walls.

[@robertcraven1771]

@@StuccoPlastering Thanks!

[@robertcraven1771]

@@steveo6631 Thanks!

[@ChrisRubeo]

Aye, Captain!

[@StuccoPlastering]

Thank you, brother

[@DrElimelech]

Awesome! Can you choose any paint color?

[@StuccoPlastering]

Yes you can! At any oof the plastering yards they have color charts or go online and type in La-Habra's color chart.lahabrastucco.com/colorcharts.shtml.🍻

[@marcleblanc7021]

Captain Kirk, do you dilute the BA, a little bit or full strenght here?

[@StuccoPlastering]

Full strength. Happy holidays.

[@adamr4115]

👍

[@StuccoPlastering]

Cool beans, Daddieo. 🍾

[@royenri01]

Been watching your videos for years now. Could you possibly recommend a stucco/plaster company down in the Buena Park, CA. area in So Cal?

[@StuccoPlastering]

Howdy Ghost dude, I recommend you google “Plastering contractors” in your area. This may help you decide. This search may also bring up “yelp” Theirs is a paid subscription, so their reviews may be more biased than Google's; however, you can scroll and read through the Yelp reviews. Hopefully, with the help of both reviews apps, you will be able to find the best fit for your needs. If you’re still unsure, ask to view their completed jobs and/or repairs and, if possible, speak directly with their past clients. Best wishes, Kirk Giordano Plastering Inc.

[@royenri01]

@Kirk Giordano plastering Inc. Thanks for feedback sir! Much appreciated!

[@TapelessDrywallFinishing]

👍👍

[@StuccoPlastering]

👍💃

[@rkgsd]

Looks like an older home with no weep screed. Do you recommend that to owners or is that too much of a remodeling project in terms of cost than it's worth?

[@StuccoPlastering]

Hello my friend, excellent question. The fact is, 90% of homes in the world don't have weep or drip screeds. My home didn't either. It's not a big deal. The code specifies that all homes built after 1980 have them installed.🍾 kzbin.info/www/bejne/qauxdaVnjL97nK8/ Stucco weep screeds mud-sills for code and cosmetics. kzbin.info/www/bejne/inyxdp-FYrWHhsU/ Stucco drip screeds Flashing countering Z flashings. kzbin.info/www/bejne/rXnGYWarnbx6hLM/Counter flashing weep stucco screed over a Z flashing. kzbin.info/www/bejne/hYmqmKGmaqmshbM/Galvanized Stucco drip screed over copper flashings. kzbin.info/www/bejne/eKXEpaugg7udhNE/Install Stucco weeps or drip screeds below grade

[@nicks4260]

Can the bonding agent go over any paint?

[@StuccoPlastering]

@@nicks4260 Yes, more importantly, the painted surface must be clean enough to eat off. Cheers

[@tristanmarshall5633]

What technique is used for knocking down the previous stucco texture?

[@StuccoPlastering]

In stucco language a knockdown dash means you throw or spray on a dash finish, then use a trowel to lightly go over that finish. Good question.

[@franksuhuang6]

👍👍🌹🌹

[@StuccoPlastering]

Howdy Frank Su Huang; thank you, brother.😉

[@ab-qr8fo]

What would you recommend I use

[@StuccoPlastering]

@@ab-qr8fo I’d recommend, La- HaBra color finish.

[@DFord-rv3nz]

I swear if im not considered the weirdest weirdo then i will be miffed hahaha

[@StuccoPlastering]

I hear Einstein was conferred weird too.😉

[@DFord-rv3nz]

@@StuccoPlastering yes but he was also a snappy dresser

[@johnknightiii1351]

Ever do a finish that looks like a scratch coat? I've been trying to find pictures of it but maybe I'm the only weird one that thinks it might look cool

[@StuccoPlastering]

Hi John, I have done about 4 homes with this look. You apply the second coat then put scratch lines in it. It is a cool finish. 🍾

[@johnknightiii1351]

@@StuccoPlastering That is great, glad I wasn't the only one to think of it. Do you have any video or pictures of doing it? Thanks again for the amazing videos!

[@Dogsled1000]

I know this stuff is free to me to watch. But week after week the advertising is getting longer and longer. I have cable tv so I can tape the show and blow thru the commercials. This is getting just as bad. I used to have way more people I watched, but it is getting less and less. Is this format going that rout???? I would appreciate your thoughts.

[@StuccoPlastering]

Howdy Al, you think that sucks also? I too have to deal with that nonsense, it totally bites the big one, I feel like a fool or a flea on a rat worse than that, an amoeba on a flea on a rat. I mean, too low for even a dog to bite. Welcome to a reality that ain't going away. It's not my call, we just show how to do stuff. 🍷💃