NEW TOOL TUESDAY FEATURING LISLE AND OEM TOOLS!

[@justramit1]

I do enjoy using and selling lisle tools.

[@FountainCityVol]

I’m not a mechanic, but you’re definitely entertaining.

[@CPthetooladdict]

Well hell that's better than I expected

[@PhillipDrumz]

Great work Chad!

[@georgeferlazzo7936]

Hello again CP Thank you for another Great Video.

[@jasonglynn7686]

I came across you a couple months ago and I Gotta say...Drop the Mic!!! I got some ocd myself and Really enjoy my tool addiction. Your knowledge and Obvious understanding of using the right tool for the job and the finesse that it gives you is impressive! Your delivery of that knowledge is F'ing Money!!😆 So glad that you showed up on my feed Brother CP. You Rock 👊

[@CPthetooladdict]

Thanks, man that's a great compliment!!

[@georgebonney90]

Hey buddy i found your channel a few weeks ago and im going back watching your older stuff im really enjoying it👍

[@CPthetooladdict]

I have 900 vids so enjoy lol

[@tctwg1]

I thought Lisle had come out with a speaker when I first saw the thumbnail 😎

[@CPthetooladdict]

Lmao thats awesome

[@andrewchristiansen8311]

5:12 The giant 2-5 inch socket set we had at the owner operators in Detroit I worked at were by Blue Point & made exactly the same way. Out of about 12 gauge stamped steel with a 1/4 inch plate. Boss said that set ran like 3k$+. I had to use the 48 inch 600ft-lb 3/4 torque wrench with those sockets for doing spindles, bearings & S-cam replacements on the air brakes on trailers. Big 3 inch nut clamps it all in. That's a solid buy.

[@davidwalle5025]

Good video. I like lisle also

[@randysmith9636]

Good morning from mid Tn. I hope everyone has a great day. As a sponsor I want to thank you for all your hard work and dedication to the goal of making a truck load of money from the internet. Those ratcheting rope tie downs are the boss. I have them in 1/4, 3/8 and 1/2 inch sizes. I haven't used just rope in years. Every mechanic needs a straight edge. I have found, on two occasions, heads that had over heated and warped. Yes to the Great Nick ratchet, many, many years ago but it is just so cool, how can you not love it. Stay strong brothers.

[@CPthetooladdict]

Where is this truck load of money you speak of?

[@randysmith9636]

@@CPthetooladdict Actually brother I was hoping you could point me ot that direction. Personally I am amazed at the wingnuts that have been so dang successful on KZbin. No actual content just spewing silly crap and people just seem like they can't get enough. The Kardashians comes to mind. I get that they now have businesses but early on they were just "famous for being famous " I guess. Anyway, thanks for another great video brother. Stay strong

[@ericgessner2618]

I buy from Nick all the time I've been to his store few time

[@CPthetooladdict]

Great guy

[@1pieman]

Lol You are welcome ROLMAO 👍👍

[@ronaldanderson4185]

Awesome informative vids as always my fellow Dmacc alumni

[@CPthetooladdict]

Heck ya thanks man for the support!!

[@agtech4580]

I have a few of those rope ratchets they are extremely handy for holding stuff out of the way and lots of other things

[@CPthetooladdict]

Absolutely 💯

[@Winters1250]

Great neck. That's a name I haven't heard in a while

[@gilmansgarage6341]

Perfect looking drain pan for coolant..coolant is like a magnet for tools & bolts ..I do tend to prefer my green pans for coolant only & black for oils..Thanks Buddy 👍 Henry 🐇

[@CPthetooladdict]

They have green available also I just got black it's easy lol

[@gilmansgarage6341]

@@CPthetooladdict awesome Thanks..

[@chelle5025]

So glad you believe in yourself - it's important for success! Keep up the good work dude!

[@palmbeachcane9523]

I thought I was the only mechanic with a Sidewinder. The youngins always ask me about it in my box.

[@BooherFarm]

I have 2 of those 4in axle nut sockets, one NAPA Carlisle and one ATD I use them regularly on MFWD axles on tractors

[@CPthetooladdict]

Thats what I have a job doing on a case magnum lol

[@BooherFarm]

@@CPthetooladdict leaking or did it grenade?

[@CPthetooladdict]

Just leaking

[@BooherFarm]

@@CPthetooladdict easy money then!

[@glennfrost6038]

i have some of those big sockets for working on trucks

[@AK-IT]

Your intros are top notch!

[@macgyver2417]

That ratchets is called a sidewinder came in a socket set with locking extensions, sae & metric sockets.

[@CPthetooladdict]

Yes sir what a dream tool 20 yrs ago lol

[@lasallj03]

That drain pan is the the beez neez

[@ampegor]

That big socket is for axle nuts. Limited torque. Have a full set at my work.

[@ampegor]

And they make handy cup holders lol.

[@dennisrieger1508]

I need to get that straight edge, that'll come in handy

[@ForsakenSteel]

I hadn't thought of Great Neck in years. I had several of their tools and always loved them.

[@123donmaster]

Very nice pan keeps your coolant from getting dirt in it if you need to re use your coolant

[@CPthetooladdict]

Lisle 38800 No Splatter Pad with Supports, Black amzn.to/3ND5pth Lisle 17972 4.5 Gallon Oval Drain Pan, Black amzn.to/3t4x6Dt

[@timwindsor03]

Awesome video brother. Thanks for sharing. Keep the content coming. Nice tools. Hope you have an incredible night. Much love and RESPECT

[@drgreenthumb8137]

Can you use them rope ratchets to hold brake calipers up?

[@CPthetooladdict]

I would say so no problem

[@123donmaster]

Keeps your coolant kleen

[@CPthetooladdict]

Keeps my tools clean lol

[@dodgesportsman772]

Another tool I need! Thanks CP. I do a lot of 3500 oil changes on the ground and I need a new pan... I'm buying this one.

[@shawnmoore610]

Another great video CP. Thanks for doing these, I see new tools all the time but never brave enough to buy. Afraid there going to be junk.

[@owenruff4796]

Those rope ratchets are nice, that sized one I believe is rated to 75 lbs but they have ones that go up to like 250 lbs on their 1/2in model. Use them to hold up brake calipers and they work amazing

[@djosbun]

You do such a great job with the Lisle Tools items (along with everything else!) their marketing director needs to reach out to you and get you on the payroll!

[@CPthetooladdict]

Well we have a great relationship and I'm pretty happy with how it is going so if it's not broke don't fix it right?

[@djosbun]

@@CPthetooladdict Absolutely!!

[@fishingmontana1564]

well I pulled the trigger I am getting my new matco 80 series box on Friday I love the toyota look I can't wait

[@U_ever]

The Deuce Bigelo reference made me blow diet coke out of my nose ! ! !

[@firsttimediesels6289]

Them big sockets are called axle nut sockets, I use them everyday working on semi trucks and trailers

[@dainsmart6237]

Hi mate The OEM straight edge is it non-ferrous ? 👍🏻

[@CPthetooladdict]

No its steel.

[@drgreenthumb8137]

Hey CP. review the FZ2 two pack from snap on. Find us something similar as well. I feel like I need some of these but I would really like your opinion

[@drgreenthumb8137]

And will OEM warranty great neck

[@drgreenthumb8137]

Just found your video on them. Your a step ahead of me.

[@CPthetooladdict]

I'm sure they will they don't have much of a choice since it is their company lol

[@larryborkstrom3580]

The straight edge is a must have for any tool user no matter the trade

[@paulmendenhall5226]

i have been using the rope ratchets for years the small ones are good for holding calipers up but i have some big ones that we hold gates shut in a recycling plant and i have one of those ratchets I bought years ago at Walmart mine is a popular mechanics but looks just like that

[@johnwhite993]

Where’s that tan and purple tool box C.P. We all know it’s hiding in the shop somewhere out of view

[@scrapmetal100]

Why would you need a anti-splatter pad on top of the oil drain tub? I have never dropped the plug in the tub or spent 5 minutes trying to find the oil filter wrench because I lput it in the bottom of the tub before I slid under. Yes, sir I order these just to save the environment from oil splatter.

[@CPthetooladdict]

Lmao true story I always drop in coolant that's what I hate!! Lol

[@pl5624]

Axle nut socket...way overkill as those spindle nuts aren't tightened that much...

[@kylesonsalla7620]

400-500 ft lbs isn't that tight?

[@pl5624]

@@kylesonsalla7620 you're crushing wheel bearings that much?

[@kylesonsalla7620]

@@pl5624 If they're Conmet preset, preset plus, or anything else that uses a cone/spacer between the races, absolutely.

[@pl5624]

@@kylesonsalla7620 good to know.

[@justinrose407]

would be interesting to see how those no splatter pan works seems like it would be a mess very cool design for sure for keeping fluids clean. one of the coolest cupholders ive seen! great video as always!!!!

[@lasallj03]

I hate everything I pick up is made in China even snap-on is starting with that garbage