New Trail Gear 3 link front suspension kit on Toyota crawler project

[@ElevatorCreator]

Very nice build, looks like it will hold up nicely in the trails!

[@Anderzander]

I enjoyed that. You can see you need to get the back done - all the flex happening at the front with the back axle still pretty square to the truck.

[@geraldmcclellan7921]

This is a great setup!! Do you remember the total length of the king shocks that were used?

[@TwoXJS]

Hope you did something about those brake lines??? Zip tie with a piece of fueline or small carb springs work great and cheap!

[@FastestIntegra]

Yes we zip tied them before hitting the trail.

[@mtm4x4]

very nice indeed i did my rear a few years back but havnt got round to doing the front gotnthe bits but just not enough time

[@BG-sn2zm]

Man that yota is the best hilux build I've seen so far! (atleast on youtube)

[@Krawl913]

Your bumper is legit!

[@FastestIntegra]

4 link rear coming next

[@FastestIntegra]

It has crapy double shackles on both sides. The left side is the way it should be the right side shackles has flipped over backwards last time we where out 4wheeling. Putting in a 4 link rear soon.

[@RobRenoRacing]

You make a stopper for your double shackles i did that and wow never a pain in the ass agian

[@FastestIntegra]

The 3 link kit brand is all Trail Gear. The dual rate coilovers are King shocks

[@mikeakamonster]

What rate are the coil overs if you could get specs gladly appreciated it

[@fishwilldominate]

Your lower coilover tabs don't look like they have much weld on em and look sideways as well... hope I'm wrong and that's not something you forgot to finish well or w.e haha.... looks good though!

[@ryansullivan5102]

Who makes those shock hoops and long are those coilovers?

[@FastestIntegra]

TG shock hoops and King coilovers.

[@trombone901]

did anything in the engine bay have to be relocated to clear the shock hoops?

[@4015_]

how would it handle at highway speeds?

[@buttcrackbandit1]

Nice. When do you think your gonna take it out again.

[@thelisa5115able]

how did you mount the top link? i am going to do that same 3 link kit on my first gen and cant tell where the frame mount goes? any pic would be great

[@FastestIntegra]

Really sorry this was my friends project build that he abandoned never got any farther I don't have any more details I do apologize

[@YotaCrew]

Bad ass! Wonder what it looks like today?

[@FastestIntegra]

Last time I saw it's been sitting in a Tow yard for the past few years because dude never got it registered and gave up on it.

[@YotaCrew]

@@FastestIntegra Damn shame!

[@DistantRelatives47]

What yard is it at? I need parts for my 83😈

[@4x4runr]

Nice!!! Need to do something about your brake lines though.

[@bearldavis]

Looks fancy?

[@ezramatthews4320]

By any chance do you remember the spring rate on the coilovers. Looking to do the EXACT same setup in my 84 but am running into issues with how to do it without full hydro. Are your draglink and steering rod the highsteer ones?

[@FastestIntegra]

I'm sorry that was my buddies build and he only had it for a short time. I think he just called trail gear spend a ton of money there and called RockShox and told them what he bought and spent more money there.

[@bope1469]

@@FastestIntegra lol

[@4015_]

how would it handle on-road or at highway speeds

[@SubePelayo928]

What length and spring rate are the shocks? Thank you!

[@mikeakamonster]

Yes please like to know the same there either 16 in or 14 in length im doing 16 just need coil rates now

[@thatdude4000]

Did u install that 3 link up front?

[@palaciosivan100]

What size shocks and hoops you using? Sick rig brotha!!

[@rcp916]

How did you remedy the front coil spring issue when it was in full droop? I was thinking it just need some limiter straps?

[@trombone901]

hows it been treating you?

[@stillburningstrong]

That kit Is made for Toyota trucks, you think it could be adapted to a different truck somewhat similar to the Toyota ?

[@FastestIntegra]

Other than the Toyota axle truss, I don't see why not. It's a weld in kit so proper measurements would be needed.

[@stillburningstrong]

right on, i was thinking about using a toyota axle since i need the differential on the passenger side. Thanks for the reply.

[@palaciosivan100]

Is that stock axel housings and axels?

[@FastestIntegra]

No it's got the trail gear trust kit on it. And ARB air lockers front and rear with upgraded shafts as well

[@palaciosivan100]

FastestIntegra so rear housing is stock but has upgraded axels and truss?

[@brandon2161]

Is this a kit. And I’m guessing those are D44s what did u take them out of. I’m debating whether or not to get a Cherokee or a yota and put a 3 link in the front and a 4 in the rear 🙂

[@Luke-jw6zn]

those are Toyota axles.

[@tannermorris8418]

😂😂😂 D44s, what a dumbass

[@WPowell420]

How long are those lower links?

[@Trofak3]

What shocks do you have?

[@anthonyreddy2834]

Why are your tender springs totally compressed?

[@DontGetBoard]

Can you move the axle forward with the 3 link or is it set where its at?

[@davidcartagena9640]

I’m trying to do the same 3 link set up on my 1982 hilux, I just want to ask you some questions I don’t know if you can help me

[@FastestIntegra]

I could try what's your questions

[@davidcartagena9640]

Oh thanks you so much for respond my text, I just want to know how long are your coil overs, and how much you lift your truck my truck still stock. Appreciate your time thanks you

[@alfonsocasillas7290]

What engine do you have in that Toyota ?

[@FastestIntegra]

Stock.

[@ceesum1]

@@FastestIntegra Stock is the very best!😎

[@calabao31]

cool TOY !!

[@hurleykid83]

Sweet

[@howardalteisen2281]

You need a lil bit bigger tire

[@mauroramos5613]

good jod

[@rockymountainhobbies1366]

What shocks r u using

[@FastestIntegra]

King shocks.

[@rockymountainhobbies1366]

FastestIntegra what size

[@jacksonpassfield6189]

@@rockymountainhobbies1366 you gotta ring kings, and they custom make them for your ute