Next Level Racing GTtrack Assembly Video

[@scm6079]

Pedal plate is mounted 180 degrees off at 6:52 - you can see it the correct way near the end. May save someone else some time knowing this! Butt kicker is also mounted in a different location than the manual suggests.

[@kevanhandley7521]

Do you mean upside down?

[@scm6079]

@@kevanhandley7521 Rotated so the rounded part of the tray that should be at the front further away from the driver is instead facing them. The adjustment bolts/pedal fit work better the way the manual shows, which is not the same as in this video.

[@marka6487]

@@scm6079 Good catch, also when the bottom bracket of the pedal assembly is first installed, the front bolt is in hole number 4 but later in the video it is in hole number 5. In the instruction manual they point to hole number one being the hole to use but using hole number one makes it too low and not provide enough support. Also it is easier installing the bottom plate upside down to begin, then flipping it after the first two bolts are in.

[@shashikiransundi]

Thank you to the designing team of Next Level. You have made the rig of my dreams - A rig that is a proper racing seat that can also be stored away when not in use.

[@NextLevelRacing]

You're very welcome!

[@Dr_Ruuu]

Hey, nice tutorial. I'm thinking about getting one, but I'm not sure whether it would fit. What is the lowest hight above the floor, you can set the wheel mounting plate to?

[@nassarnassar6332]

Thank you I really appreciate that .. i can't find anyone setup the belt .. thanks god i found you 🌸🙏🏻

[@NextLevelRacing]

Great to hear! The GTtrack is used by professionals and the 4 point harness is a great way to add more immersion to your racing experience. It is also great if you are planning on adding one of our Motion Platforms in the future.

[@Morcs33]

Cant wait to get this. Will there be a any sales in future ?

[@NextLevelRacing]

Visit our website and you can find out where to get yours!

[@arrakis101010]

What is two plates with a drilled logo? Looks fantastic, i will use it to raise pedals in V3 version.

[@DG53]

Loved the end hahaha :D

[@ersin5485]

Mein Paket ist eben gekommen, sicher und stabil verpackt und alles heile 😍 . Einleitung war super aber dank diesem Video war alles perfekt 😇. Macht weiter so mit den Videos das hilft sehr. Aber ein Tipp für die Zukunft: Der Kollege wo das Video dreht soll auch Zeigen welche Schrauben in die Hand nimmt und ob washers dazu kommen oder spiked washers.. Habe erst halb alles so zusammen gebaut und dann alles wieder raus und die washers dazwischen rein dann wieder aufgebaut 😃. Grüße Ersin

[@NextLevelRacing]

Thank you for the great feedback! It has been passed along.

[@ghastous]

Been building this all day and it as to be the worst thing i have built also on the 5min mark when the top is getting installed 1 of the holes the screw wont go into it at all. Not matter the hole on the bar its the same. Regretting buying this now cos its just awful to built.

[@NextLevelRacing]

Hi there! If you need assistance with building the cockpit, please reach out to [[e-mail]]([e-mail]) where our Customer Service team would be more than happy to assist!

[@abhijeetjsawant]

Building this is a fckn nightmare, due to misalighned holes. You'd think after 5 years of products existence their quality check would have improved.

[@NextLevelRacing]

We're sorry you've had a poor experience! if you need more help building our support team would be happy to help! [e-mail]

[@JB062]

I came for the assembly, but stayed for the music.

[@NextLevelRacing]

We are glad you stayed!

[@dodgeviper5647]

Thank you just got mine this cleared so many things up

[@NextLevelRacing]

Glad we could help!

[@divejumpshooter6947]

Save time with electric drill/screw driver and proper hex key bit

[@NextLevelRacing]

Thank you for the feedback. We do recommend that the electric drill is set to a setting that will not damage the frame of the cockpit.

[@Jamsaladd]

why doesnt my seat fit in like that????

[@josep1554]

How long is it?

[@NetBlazellc]

When do you put the wheels on if you have the motion platform. It doesn't show that happening. Just shows them appearing. If you follow the logic of the non motion - it should be after installing the motion V3, but before the seat?

[@NextLevelRacing]

Hi there! Great feedback! You can install the wheels at any point in the build, some wait until it is completed, and some install the wheels once the base frame is together! Hope this helps.

[@NetBlazellc]

@@NextLevelRacing Ok. Great, thank you. I figured it didn't really matter, but good to have confirmation. Can't wait to get it all sorted and try it out.

[@NextLevelRacing]

No worries at all! Exciting times!

[@jeremykarwoski6913]

So only 12 bolts come with it for the accessories?

[@NextLevelRacing]

Hi there! Yes, 12 bolts.

[@rougewolf9703]

Hi people at Next Level Racing, would there be a model of this coming out for Xbox

[@NextLevelRacing]

Hi there, Thank you for the feedback! Our Cockpits are all compatible across all consoles like Xbox, PlayStation and PC.

[@rougewolf9703]

Hey. I mean an Xbox logo on back of the chair

[@andreas_kuhn]

ich will kaufen !!!

[@baflabies]

Got mine today:)

[@NextLevelRacing]

Awesome! Make sure to share you photos with us!

[@brigildea]

may upgrade from a playseat challenge :)

[@nobroblem1]

Wow cool ,,, thinking to buy

[@NextLevelRacing]

Link is in the description if you want to find out more!

[@kakitayuri]

Man, thank you all for putting this together! Just unboxed mine and the instructions are great, but some of the angles are a little hard to see and this just instantly cleared it up! See you on the "track!"

[@NextLevelRacing]

Awesome! Thank you for the feedback, we will make sure to always provide instructional video's to our community for quick and easy assembly.

[@SuperSensei420]

Great tutorial. I just have one question. Could i put the plate for a shifter and handbrake on the other side??

[@NextLevelRacing]

Hi there! Yes you can place the Shifter and Handbrake Plate on either side!

[@SuperSensei420]

@@NextLevelRacing thank you 👍

[@FreestylerAlbert]

Hmm weird because i nthe box I didn't had enough washers. (I put washers on both sides of the screws). And I'm short on at least 4-6 washers. (From the M8 washers)

[@NextLevelRacing]

Hi there! Please reach out to our Customer Service Team if you are missing these washers. You can reach them directly at [e-mail]

[@idontknowyou876]

My heart when you stood on it....☠️

[@minis7782]

Great review ! I am ordering same Next Level Racing GT Track with v3 motion with a traction Plus Motion Platform for my kid. Any advice ?

[@NextLevelRacing]

Our Advice is to have fun with it and look up motion profiles that others have created for specific game titles! There are some great ones out there! Our Discord has a community just for Motion Platform owners where a lot of profiles are shared for easy application. They are also very helpful if you have any questions, so make sure to join.

[@andreasbalan11]

The pedal plate flex a lot

[@NextLevelRacing]

We would love to address this, are you able to send some photographs through to [e-mail]

[@joeallen4587]

Are you considering a rally/drift style setup adapter for the shifter/e-brake mounting positions? Just need more height really. Otherwise perfect for me, especially given how well you guys are doing in the motion advances.