T-Motor Feather 120 // Low Weight // Backyard Cruiser

[@NickBurnsFPV]

Of course between my recording and publishing all sorts of vendors now have it. The FlyWoo FireFly does fly longer on 1s. RaceDayQuads - bit.ly/3PhfPza Banggood - bit.ly/3JCaEsl T-Motor - bit.ly/3JEQI84 PyroDrone - bit.ly/3zBIbhA HobbyRC UK - bit.ly/3A0OpIf AliExpress - bit.ly/3JGSdm1

[@jumpstartfpv]

But the firefly does sound louder

[@GMx_1]

I was just about completely sold on this drone until you said - no stickers! I mean wtf? No stickers? The funny thing is I am kind of half serious! What a cool little quad though. It just goes to show... a year a ago i did not know jack squat about fpv, now i know squat but one thing that i have come to understand is that these smaller quads are really not the juniors to the 5" racers, or at least they stand their own ground quite well and not only are not a compromise but in many ways very much the equals. And of course like you summarized towards the end, this is perhaps not for veterans but then everything has its place and of course this is not a racer but heck, to me anything over 5mph is a racer! The silent nature of this quad is something very appealing, keep those nosy "i am going to call the cops on you" neighbors and other people minding their own business. Thanks Nick, great reviews as always.

[@wesorama]

I'd like to see how it does on bi-blade props.

[@justalex7416]

I agree, very curious to see a gf3018 in this quad.

[@KOrnhOliO1]

Let's see how it flies on 2S! Board is rated for it and 7800kv motors is easily for 2S! Let's RIP this baby!

[@bkmahaffey]

Funny motors are for 2s, But has ph2 connection. Need to replace ph and go with 2s and that thing will rip! This is like the builds Quad66 builds. It will get rid of prop wash on 2s at that KV.

[@Toddsnightmare]

Yeah I'd like to see this on 2s for sure price might be a little better if it can do it

[@wmnsriteslol]

Higher voltage won't fix prop wash and bounce back...thats down to the tune (P to D ratio) as well as the torque the motor is able to produce based on volume.

[@stelic9515]

On 2s is possible to overheat the motors, 1102 are to weak for that props

[@okkie_2656]

Just ordered one, almost new to FPV flying. The fact that it's basically almost silent appeals to me alot as that will allow me to practice in my garden alot without freaking out the neighbours. Soldering on an ELRS receiver is going to be a daunting task for a beginner like me but well; it's gotta start somewhere. After that getting it all to work using betaflight and who knows what will be a challenge as well. Yeah, I should have bought a ready to fly kit. I know that, but this one had the perfect appeal for me. Thank you for this review.

[@brianfreland9065]

Be careful! Those elrs receivers are super tiny and extremely difficult for ppl new to soldering. Don't be afraid to ask for help if you're not confident. Happy flying!

[@okkie_2656]

@M M It went quite well all in all. Binding was a hassle indeed. I remember having to make sure elrs both on the drone and the receiver had to be the same version before it worked. Also found out the USB cable didn't always connect just like that to get to the drone in betaflight. It's quite some hurdles us beginners have to take at first.

[@airheadbit1984]

I had to purchase Sequre SI012 Pro Mini Soldering Iron since my $400 rework station does not have a tip small enough for 1mm pads. Get the TS-ILS tip, it is the smallest tip I can find.

[@Gosuminer]

Thank you for the review. I just moved to a small town where there are lots of nice spots in parks and playgrounds but I definetely cannot fly my noisy 1407 specced 3" there so a very quiet toothpick is exactly what I need. I would consider the Feather 120 but wifey just convinced me that I have too many quads already 😄.

[@NickBurnsFPV]

Maybe time to sell one to move onto others? :)

[@KOrnhOliO1]

You must have a 2S quad that will be just about as quiet as this and will RIP, vs. this being a cruiser.

[@frankcastillo8869]

@@KOrnhOliO1 no he doesn't

[@deathpunchrigby1664]

@@KOrnhOliO1 what 2S quad would you recommend?

[@KOrnhOliO1]

@@deathpunchrigby1664 Flywoo BNF Firefly 2S Nano Baby 20 looks like the closest thing to the discontinued Diatone GTB229 that is still my favorite. The Flywoo looks like a clone of it. But, the GTB229 had 1103 motors, and the frame was much beefier and stronger.

[@erikvf7]

NIce review, Nick. It's really impressive how quiet it is.

[@dougkresl7538]

Close, but should of been 2S. One of my favorite old quads has 1104 7500kv with bi-blade HQ 3x3 props. Tons of power and pop, and is super quiet. Perfect for back yards or a small park flyer.

[@NickBurnsFPV]

We might be able to try it on 2s. I think if the motors/esc can handle it, it will be more aggressive capable.

[@KOrnhOliO1]

Total Agree! 2S is in a whole other ballpark!

[@dougkresl7538]

@@NickBurnsFPV Maybe with a light bi-blade it would work and not draw too much amps. Those tri-blades seem to be overkill and causing a lot of "wobbles" even with a light wind.

[@drunkskunk00]

7800kv motors are just Begging for Bi blades and 2s!. Maybe drop down to 65mm bi-blades since it's 1102 motors. Its a tempting little quad, begging for a few mods. Thanks for the great review!

[@GKW25308]

1S, Great flight time and SUPER quiet, my favorite aspects.

[@johncarold]

Hi Nick Great video and review of the T-motor Feather 120. What NO STICKERS ? I love the size but I don't know if I like that you can't change the angle of the camera. Thanks again for the video and information

[@jdnic1]

Yes the motor are for 2s. But I've been doing builds like this, where I take a 6s motor (lower kv) and run it on 4s. The lower kv meant that it has more windings, therefore more torque. The trick is now that you are running a low kv motor, you now have to match it with a prop that's higher pitch. That's why on this build they went with a 3 blade prop.

[@661FPV]

+1 for the 2s and biblades suggestion. I see alot of others agree. I had a 3" with 1103 8500kv on biblades and 2s and it flew great. Still think 1102 is too small for a 3" triblade, but if it's light enough it will work. Mabey like 2s 300mah (2x 1s)

[@StuckOnAFireHydrant]

Haha same for me nick with the rubber band, but for me I think it's an "ocd" sort of thing. Very similar flight times to my ultralight babytooth. I'm using a diamond fc, 1.5mm thick frame, a 450mah and some biblades and I get similar flight times with some punch outs and tricks in there. Probably won't pick this one up since I have a babytooth but still looks very good nonetheless! Going to pick myself up a .5g elrs receiver for my babytooth soon and that new tx12 so I can get some more range

[@NickBurnsFPV]

Elrs will certainly add control link range. Works so well

[@BeardieFPV]

I would love to start building more of these lightweight cruisers. Not because of the dumb "drones under 250g don't need to be registered law", but for the reason that they really are a blast considering to can fly much smaller areas and the noise level is so low.. great video as always Nick!

[@BeardieFPV]

@Grim FPV yeah.. those people.. lol

[@stelic9515]

And when crushed not much damage!! I started with 9 inch but now I also like small and light.

[@GMx_1]

Good review, the quiet nature of this quad is very appealing. To me that could be a big reason to buy. Also as i am listening to this video I can't help but laugh along, After 12 min in. Nick notes how it took him quite some time to get the canopy back on and then at 12:42 he mentioned that the quad did not come with any info on the FC. And when he went to the website he could not find one. Not surprising, this hobby seems to do this quite often and as a newbie it can make figuring things out next to impossible. Or at least it takes a lot longer to eventually find the info you need than is necessary. And I do find the fact that so many companies do this very puzzling - I mean I know that it would be a little extra work to get that info. in the box or at least on the website but it is not that much work so please FPV companies, do better with your support and documentation! acknowledges that it ever existed. And that link was for the Caddx app to change settings on the camera system.

[@NickBurnsFPV]

yea, it seems the fpv hobby is dependent on trial and error and hours lost to research before just trying something.

[@KOrnhOliO1]

yeah, in a few ways, this quad is like those back in 2016! No manual, no pin out, no adjustment to camera, board says 1-2s, and motors are only 7800kv, yet says 1s only. Seems T-Motor is covering their AS$ so they don't get claims of it going POOF! ❤‍🔥🔥🧯 Yet, in 2016 this would retail for $99 !

[@GMx_1]

@@NickBurnsFPV Yea right. I bought a quad a year ago - but I bought it in parts, everything seperate so no big deal right? OK so how do you wire everything? Where are the schematics? What the heck is Betaflight? What is the CLI dump? How do I know what board I am using (when buying a kit, not when you bought it like i did) etc...

[@NickBurnsFPV]

@@GMx_1 We go to bed with our head spinning sometimes. Others might even have trouble sleeping. This hobby can be so frustrating, in the long run.....worth it 😀

[@GMx_1]

@@NickBurnsFPV Yes it is. It is just when I got my first quad - a BNF from HobbyTown about 7 years ago I opened the box and saw... Betaflight and flashing and CLI information and... what is a flight controller anyway? My heli's and planes don't have them... and the shop had little ability to support as that was not something they had experience in at that time. So I got my quad going with my spectrum radio and receiver and crappy FS goggles (the older ones were really not good... plus I am sure the VTX was probably not that good either)... Flew numerous times but all of a sudden one day one motor was not working - so OK, lets fix... OK nothing wrong with the motor, the ESC checks out... so lets take a look at the FC - well long story short I thought I backed up the firmware and CLI data but that turned out not to be true and I flashed the wrong firmware and bricked my $350 quad. So I left that hobby for a number of years until 1/1-2 years ago where I thought things have moved forward so much let's try again... So I bought all individual parts to build one and wouldn't you know it... the documentation and info available was pathetic and that is being nice... in some cases not available, in one case it was wrong!!! My FC for the quad I intended to build came with the wrong info and as a result... could not get it working and could not understand why as I had exactly followed the info about the board layout... which was giving me the wrong info! So POP, magic smoke, and one less FC in this world as a result. And I am out like $80! for NOTHING. That one hurt! And so it was right back in that same spot when I left years back... but now I have seen so many KZbin videos of people having so many good results and fun including your great channel so I said i have to overcome this... so I bought a BNF... and guess what... it did not work out of the box!!! I contacted the vendor for help and went back and forth try this try that.. hmm that's odd kind of stuff... As it would turn out it literally had a defective FC... but the vendor was awesome and very supportive and apologized and they felt bad and gave me a 10% discount on my next quad purchase - which I applied to the replacement one for the defective quad. that was a lot of trouble to go through for about $15 but i do feel that they did the right thing for sure, it was not their fault. So finally I am actually back flying after all of that so I can imagine that if this was my experience that it is possible and probably likely that lots of others are having a similar experience. So message to the people that make the electronics the FC, the ESC, the VTX, any on board DVR like the Turtle from Caddx, the cameras, all of you PLEASE provide clear and accurate info. on your products. And to the bind and fly folks - PLEASE provide a clear list of exactly what components are in our BNF so if there is trouble we know exactly where to look for information. And yes, recently (and possible for longer but I only know what I had in hand) many of these products are coming now with adequate documentation which is so helpful. I recently bought a GEPRC Cinepro and the documentation that came with it was very good. All components used in the build were identified with a manufacturers PN, the components on board all had good documentation... except for the Caddx tarsier, that was not so good but at least the thing works and this story is long enough so I will end on the note that this thing is a ton of fun to fly and yes, this took me a long time to get here so if you are having difficulties (not you Nick) I think if you just take a deep breath and start working the issues you will find that the answers are not that hard to find anymore - there are so many great forums to help and YT videos available - take a lazy Saturday and watch a few hours and you will learn a lot. Cheers!

[@MCsCreations]

Oh... Sweet! I loved it, Nick!!! 😃 Fantastic flying and review as always!!! For those who like to explore like myself... It seems like a fantastic option! Anyway, stay safe there with your family! 🖖😊

[@KOrnhOliO1]

1S lipos have soooo much sage if they aren't brand new batteries. I much prefer a 2S, as they will RIP and cruise, where this is cruiser only...with a crap canopy with no adjustment! Back to 2016 we go! 🤣

[@stelic9515]

Thanks alot for review This is my favorite category of quads Light, eficient, silent and durable

[@kaskalo2]

I might be late for this particular video, but there is one fore sure. It is Moblite7. I know you reviewed it, but I don't know the timing difference. But you can easily get 8 mins, and in really slow cruisy flights, even up to 10 mins.

[@duduoson1306]

Is that wobble really wind? I don’t see movement in the leaves in the trees and shrubs. I had a similar wobble w a loose camera on my fpvcycle baby tooth.

[@PropsOff]

Sorry Nick, didn't realize, you've been busy. Like smashed here as well...👍🏻🍻👊🏻

[@smiththemyth]

Great video Nick! You never disappoint with the videos

[@NickBurnsFPV]

Thank you sir

[@thenorthorangesquad1738]

@@NickBurnsFPV how u know it’s a guy?!?

[@smiththemyth]

@@thenorthorangesquad1738 he’s not wrong, not a lot of girls fly fpv

[@thenorthorangesquad1738]

@@smiththemyth wait, do you think girls can’t fly fpv?? What is wrong with you

[@smiththemyth]

@@thenorthorangesquad1738 I didn’t mean it like that, you are twisting my words, it is commonly know that there are a lot more male pilots than female in fpv

[@nikotttin]

At 1:12 did you say the poop ph2 connector? Rightly so when speaking about the rolled pins… 😂

[@NickBurnsFPV]

I don’t think I tried to say that but I may have or at least sounded like that 🤷🏻‍♂️

[@nikotttin]

@@NickBurnsFPV It is actually pretty fun and well placed 😄

[@NickBurnsFPV]

@@nikotttin lol. I made a joke then. Happy accident. 🤣

[@RCOverKill]

Have you flown it on 2.5 props, or bi-blades? It probably loses a minute or more on 2.5, but I bet it flys much better.

[@NickBurnsFPV]

I have not. In reviews I generally fly them as they comes. Tinker time comes after 😁

[@lemonsquareFPV]

Agreed! 1102 with 65mm bi-blades or better yet GF2015 and that weight will fly very well. KV is WAY too low, but that’s just me, I like stupid high KV.

[@NickBurnsFPV]

@@lemonsquareFPV kv gives us that fun "pop" when we hit the throttle. Like a rocket ship :)

[@lemonsquareFPV]

@@NickBurnsFPV yes it does! And isn’t fun the name of the game 😁

[@jebrc]

almost seems with kv and all it would be more of a 2s flyer but i like it alot either way.

[@NickBurnsFPV]

Yea it seems it would have been 2s capable

[@SOLARFPV]

Maybe try different props for 1s. I find the 4 bladed old gemfan 45mm props or HQ bi blades 65mm work great on 1s micros.

[@NickBurnsFPV]

Yes I am going to try the 65mm on 2s. See if it can be lively

[@KernsJW]

Maybe you can adjust screw lengths to change the camera angle? Cruising for 6 minutes isn't bad at all. Glad to see your review and look forward to a 2s try

[@helmutNO]

The garden is coming together nicely! It also is impressive, how silent this quad is. Nice flight time, but also looks a little boring, I think.

[@NickBurnsFPV]

Yes it won’t be for everyone for sure. I am going to try it on 2s with different props

[@shakeymikesadventures6793]

This looks like a good one for 2.5 inch props,let us know if you tried. The camera looks like it'll blow out with periodic bright lights/sun, other than that even i like it.

[@NickBurnsFPV]

I haven't tried that yet. I am checking with the company on trying it as it on 2s. I suspect the esc might be two small to handle the amps.

[@ultrazep]

I'm still enjoying my Moblite 7. With 1S 650mah I get around 9 minutes of flight time.

[@fatpoorvagrant3662]

I'd love to see a video of you flying it with a 2s battery 🤘😎

[@NickBurnsFPV]

We might be able to to that. Ofcourse we need to change the battery connector and the pid tune :)

[@KOrnhOliO1]

YES!

[@Mupshot]

seems a little pricey, but these days so does everything. My first build was the Dave C rekon 3. not a performer, but it got me hooked.

[@NickBurnsFPV]

yea, the last two products I have reviewed are at basically the same price, 26months ago they probably would have been $99

[@gmascagni]

Great job with the review. Id like to know your favorite 1s outddor quad and why? Either custom or BNF. Thx Maybe a shoot out video on best 1s outdoor ?/ back yard flyer??

[@NickBurnsFPV]

probably the rocketrace with 1002 motors, or the starlord on 1102 18000kv, or even the the mobeetle6 as it can be inside and out :)

[@nbchowning]

I bet this thing would fly way better with biblades. I've flown a lot of 1S 3" toothpicks with biblade props on 110X motors

[@NickBurnsFPV]

I plan to try it out on 2s with 65mm biblades

[@scherlocker1]

Cool quad

[@SALESPRODUCTIONS]

Question - could one of those incredibly light cameras be used with this ( Insta360 ) ? and have a decent size/capacity battery and still be under 250g ? ( I will also add that I don't want an aggressive flyer - just a smooth cruiser for nice videography - and I am impressed by how incredibly quiet it is )

[@NickBurnsFPV]

oh yes, but the more weight we add, camera and battery the worse its going to fly. If to much weight it will not fly long either, maybe even not get off the ground.

[@CameronDasso]

I looked on their web site and don't see the PID tune. Do you have a link to it?

[@NickBurnsFPV]

Scroll way down on the feather page. It’s linked below the last image. Zip files

[@CameronDasso]

@@NickBurnsFPV I only see a VTX file and the other one seems to be a .step file for 3d printing.

[@broken4999]

Sick flight nick cool little quad.

[@NickBurnsFPV]

Thank you

[@ToyotaCamry-re4bl]

Hey nick great vid do you think 19000 kv 0802s would spin 2.5?

[@24kJames]

Here you go: kzbin.info/www/bejne/f6q8nIdsndytbLc

[@justalex7416]

I never think a 3" 1s will fly so good on such a small kv. Impressive.

[@stelic9515]

3 inch can fly well on small kv. I fy darwinfpv baby ape that have 4300kv on 2s battery. On 550 mah 2s battery the fly time is almost 9 min.

[@grzegorzstaszewski7672]

Are there any similar drones (quiet, 1s, elrs) on the market? I can't find any 🙁

[@NickBurnsFPV]

Depends on how quiet we are looking for. But this is certainly more quiet than just about anything I can recall.

[@grzegorzstaszewski7672]

@@NickBurnsFPV Thanks for Your reply. I'm flying a Meteor 75 right now but looking for a 1s toothpick to have something faster for outdoor flying utilising the same batteries. I just don't want it to be louder than Meteor to not disturb the neighbors.

[@NickBurnsFPV]

@@grzegorzstaszewski7672 maybe check out the crux3 1s. Be careful there is another version that is 2s. This is the 1s version kzbin.info/www/bejne/f6eqap19fqyhpLs

[@grzegorzstaszewski7672]

@@NickBurnsFPV You are right, this is the best choise. I will have to purchase it from china as it is not available in stores in Poland. Love Your videos, they are the best reviews on YT 👍

[@NickBurnsFPV]

@@grzegorzstaszewski7672 ah gotcha. I do have a secondary review on it where I run it on 2s after changing out the battery led.

[@aerialcombat]

Nice cruiser!

[@luisLP5752]

Hey there!! Do you do commission builds?

[@NickBurnsFPV]

I don't. As I have a day job I like to keep my fpv a fun hobby.

[@billmcdonald4335]

Nice review, as usual. I'm impressed with the flight time, but I gotta say, it's a tad pricey for me.

[@NickBurnsFPV]

I am seeing this price point more and more. Pretty sad but might be a sign of the times

[@billmcdonald4335]

@@NickBurnsFPV Yep. Fortunately, there are cheaper units out there, otherwise I'd be S.O.L. ;)

[@derrogers]

I have a spare set of 1202.5 6000kv and an Zeus 5a AIO... when I want to build something similar, is it flyable with 1s or do I have to go 2s because of the lower kv?

[@NickBurnsFPV]

I would go 2s. 1s will work and the larger size of motor will help control the prop on 1s but the flight will lack performance. 2s will bring out the performance

[@derrogers]

@@NickBurnsFPV perfect, really want to try that ;-) I wasn't sure if the esc could handle 2s...

[@NickBurnsFPV]

@@derrogers I suggest going slowly, amp draw with motors and props can be a bit of a wildcard. Put the amp draw on your osd and cruise around noting the values, then pump the throttle to see what it bumps up to. If it gets to close to 20amp 5amp x 4 esc, then we might need to do a throttle/motor limit to keep it safe.

[@KOrnhOliO1]

@@derrogers I get a 12 amp board. I don't trust those 5 amp boards...don't know why they still make them!

[@revfpv7908]

Remind me of the damfast with the old BetaFPV 12a fc from the hx100 and the 1103 8k 3”. Except that looks better than this one to me.

[@NickBurnsFPV]

Wasn’t that one 3s? I need to go back and look. I still have it but haven’t flown it in a while

[@revfpv7908]

@@NickBurnsFPV mine was 2s and flew great

[@NickBurnsFPV]

@@revfpv7908 Mine might have been 2s as well. Not with it in the moment to take a look.

[@richardprideaux3128]

Not sure if it's been said but the moblite7?

[@NickBurnsFPV]

Hmm what about the moblite7? Seems unrelated as that one is prop protected and 40mm props.

[@richardprideaux3128]

@@NickBurnsFPV just responding to the "1s" that flies as long but fair call on the unfair comparison :-) love your work mate!

[@NickBurnsFPV]

@@richardprideaux3128 Okay Thanks for clarifying.

[@trajanfpv]

Wait, don’t I remember you saying you had a TBS Fusion on order? What happened to that?

[@NickBurnsFPV]

I have that module. I don’t use it much, I found the interface a bit combersome

[@trajanfpv]

@@NickBurnsFPV huh, I find the interface to be better, but maybe because I use it more often. Now three of my flying buddies have sold their rapidfire to buy the fusion because of the sync issue.

[@NickBurnsFPV]

@@trajanfpv My largest about of time with it was a weekend testing the different modules I had at the time. I didn't spend much time just using one. But yea, I likely got very used to rapidfire and need to spend more time with the fusion to get comfortable.

[@jaziborilistyle5811]

That thing is sooo cuteee but dont mess with it 🤣🔥🔥🔥🔥

[@NickBurnsFPV]

Fire? Are there reports of them burning?

[@nq0amark138]

It is quiet for sure. I thought at first your audio was not recording...One little gripe, why do these companies used rolled pin ph2 connectors anymore. I changed out my tinyhawk 2 ph2 connector recently for a solid pin ph2 and it makes a big difference. It can't be that much more to use solid pin, I wish they would just stop doing that already !! (Emax) :-/ Anyhow I'm here to give a thumbs up for your analytics. Cheers ;-)

[@cinemoriahFPV]

Seems to me just flying around the backyard you could leave it on 25mw and get even more flight time.

[@NickBurnsFPV]

it would be very very little difference. The power consumption from 25mw to 200mw isn't all that much. It would be small enough we wouldn't know if it was just a slight different in the flight (less turns, few high throttle moments), or if that battery just performed slightly better.

[@kieren7763]

A mobula 7 2s board will make one of these I made a printed frame around 110mm but I run 1103 motors 11000kv with 50mm 2 blade props a 550mah 2s with xt30 connectors gets from 5 to 11 minute flight times depending on how aggressive you are may be abit fast for nicks backyard though if anyone is interested in the frame I can put it on thingiverse it's tougher than that carbon frame

[@djSpinege]

would love to see someone freestyle it

[@a2jadam]

Moblite 7 fliying longer

[@cyclops-fpv]

Try it on a 2" prop and see if that improves matters some!!👍

[@NickBurnsFPV]

That will help or even bi blades

[@KOrnhOliO1]

@@NickBurnsFPV Yup, bi-blades with 2S! We want you the RIP IT, Nick! :)

[@NickBurnsFPV]

@@KOrnhOliO1 I hope the amp draw isn't to high could be 🔥

[@KOrnhOliO1]

@@NickBurnsFPV like others have said in comments, switch to bi-blades. Treat it like a toothpick. Use low amp draw props. The board says 1-2s and the motors are certainly low enough kv.... Heck, if the board could do 3s, I think those motors could too. This would be such a better seller for T-Motor if it RIPPED on 2s! 😎🤘

[@paulgeorge1069]

1404's on 2s would make that little thing rip

[@snapgarrett1]

I can't believe how quiet that is. I makes my th3 sound like a helicopter

[@radfield6089]

its crazy that they want 160 for this when the emax nanohawk x exists

[@radfield6089]

@M M so was the nanohawk x, still better.

[@radfield6089]

@M M your t motor you cant get bound? damn

[@jpaul8589]

My sweet spot copter turned out to be Xknight frames, 1408 motors, racekraft bi-props running 550-800 4s batts.

[@cloverhuang]

💓💓awesome！！！

[@loryriga]

Omg this quad definitely need a serious pid tuning session. I don't get how they sell crappy flying things like this

[@imager09tube]

The perfect backyard drone! Will buy one!

[@Kaarzah]

1102 motors seem a bit overkill for that size/weight quad, surely 0802 would have made more sense with 65mm bi-blade props.

[@NickBurnsFPV]

Then we also need a much smaller frame too 😆

[@cccagley5276]

65mm props on an 0802 motor is no good IMO. Maybe 1002's but not 0802. Those are for 40mm props.

[@GMx_1]

Also I might suggest to the manufacturer that a small increase in the size of the canopy could go a really long way. Yea, I get the every gram counts on a 1s quad. Also to all manufacturers, there is ZERO excuse to not provide clear information and documentation regarding the components... after all even at $160 to me and I am sure to many others that is a lot of money and we deserve to be able to maintain these without spending a few hours scouring the internet hoping that someone has some information... Your video says "their response is I had finally figured it out..." So i take it that their response was no response and I am guessing that this was just a little lounge tie moment in narration. Yea, I do not like that. Perhaps you meant something different than this but that is what I could hear... So how awesome would a quad be that goes up just a touch on the motors, same props, 2S, perhaps with HD Zero... It is like this design is pushing the limits of these options so there should be a design where everything very comfortably falls into place and the performance would reflect that. And a question - you mention in this video you mention your favorite quad but you did not way what it is, can you tell us?

[@vanlifefpv6340]

flies terrible

[@jondoe6618]

moblite 7 10 min

[@fluoxethine]

Maybe silent but lacks HDZero xD

[@justainchoe6141]

It’s sad that this is supposed to compete with DarwinFPV’s version of babytooth. It’s not, but we all know it exists. Brings pretty much nothing to the table. Honestly, this is why fpv sucks, because it’s Chinese companies who have zero idea of what’s really cool. They just don’t have the diversity of ideas and the competition for it or something. I’m ranting now, but seriously, I cannot believe that this is what t-motor came up with. Low risk, low reward, and I.p’m ashamed that Nick even reviewed this.

[@NickBurnsFPV]

Not every quad is for everyone…as I say. Some really want this for the flight time and silence, even knowing how poorly it flies. Being ashamed I reviewed???? I am not, if no one reviews a product how is the market to have any idea what a product is like. There is a service to the community to review products I don’t like or I don’t want to fly. That service is information. Before my review did anyone know how it flew or the lack of AIO wire map or that it came with no tune or vtx tables? That’s valuable information. If we turn our nose up at a product based on paper specs we also can miss the opportunity to find a diamond in the rough. That’s my rant 😁. Not mad just my perspective on the topic and why I review some products.

[@brianlangford7278]

Anyone interested in this platform, check out babytooth setup, much much better