Changing an ATV Belt - 2014 Brute Force 750 without pulling Clutch

[@teresalang7415]

Not a perfect video, no editing for the most part. Exactly how I do things. So in it's imperfection, its perfect. Thank you for posting!

[@NickPixelTV]

Thank you for this I hope it helped you

[@MasonGoodman1]

Been trying to fix mine for a while lol Ty man ur a life saver fr 🙏👍🤝

[@calebnunn6029]

i know im a couple years late to the party but this video helped alot thank you man!! Also Thank you for the 10 mm humor!!!!!

[@NickPixelTV]

Not a problem. Thank you!

[@berrry54]

Thanks for the video, I have to do it on the same machine and feared that would be much more complex. In the end you can even do it in the wood with limited tools :)

[@NickPixelTV]

Anytime my friend! Its not too bad just depends on how much mud is packed under the seat haha

[@BruteforceExplorer]

great information! Subscribed as Bruteforce Explorer :)

[@NickPixelTV]

Thanks Brute! They are fun machines eh ;))

[@BruteforceExplorer]

@@NickPixelTV yessir! I am also creating Brute vids, check it out!

[@xzkt]

That doesn't look like too hard a job. I might try changing belts on my 4 wheeler next time. Good job on the video. Phil

[@NickPixelTV]

Thank you Phil! I hope you are well!

[@jcims]

Public service announcement, fingertips stuck between belts and pulleys tend to separate from their owner. :P

[@NickPixelTV]

This is accurate information 💪

[@dancassidy7471]

Thanks for sharing

[@NickPixelTV]

Thanks for watching 👍

[@pinefighter1]

Thanks for the info,good video....nj

[@NickPixelTV]

You bet anytime :-) Thank you

[@tomdemoss388]

So my belt pretty much exploded on my 03 650 Prarie. There are still thin strands of belt stuck in secondary clutch, how do I get them out?

[@rijoanfahim2018]

wow great product

[@850.dmax6.6]

I have a 07 brute force and was riding it pretty hard today and my belt basically blew up on me and shredded. I haven’t had time to take the cover off and check it out yet. But I have noticed the fourwheeler goes into neutral fine and rolls perfectly fine. But I’ve had a problem with it going into gear. Will it go into gear once I put the new belt on?

[@NickPixelTV]

Mist likely it may also be in limp mode if the switch got tripped. I would pop the cover and check on everything out first.

[@850.dmax6.6]

@@NickPixelTV everyone I’ve seen who shredded there belt said there’s no way it would damage the trans so I’m hopin for the best

[@ayawoke9906]

Did you smell rubber after the first use? I just replaced mine and could smell a little.

[@NickPixelTV]

On a new belt you may smell a bit if rubber but it shouldn’t be that bad. Is the belt slipping at all?

[@04tsxpower]

Never once pulled clutch. Never knew this wasn't a common way to do it

[@NickPixelTV]

tell me about it lol i saw ppl pulling clutch i was like welll heres how i do it. thanks for stopping by

[@04tsxpower]

@@NickPixelTV lol good stuff

[@hightorquepulls8512]

My atv is going foward by its self when i put it in gear aly help?

[@NickPixelTV]

May have to adjust your belt tension. Also may just need broken in a tad bit also make sure everything is clean. A new belt will stretch when it's brand new. I would ride it a bit and see if fixes it. hope this helps

[@hightorquepulls8512]

I dont think its the belt tension because i removed the belt exactly like you showed in the video and before i changed it it was perfect

[@NickPixelTV]

@@hightorquepulls8512 A new belt is going to be tighter than your old used belt. Probably after running it it will loosen up a bit and you wont experience that issue.

[@guitardoc102]

How many hours or miles do you get on a belt

[@NickPixelTV]

guitardoc102 depends on how you ride. My first one lasted a good while prob 2500 miles and is still a backup. The others I replaced were because i let a friend use my machine and he tried to pull a stump out and smoked the belt.

[@guitardoc102]

NickPixelTV Im not that hard on it.

[@NickPixelTV]

guitardoc102 honestly i like to change mine every 3k miles give or take. I run my machine alot so its never really sitting for a chance to rot or get stiff. If you’re hearing noises or a big delay in gas to response probably time to change it

[@guitardoc102]

NickPixelTV ok thanks

[@matthewhickey4010]

Anyone have a problem with the belt .I got a 2021 and today I went in water amd it stopped moven but no water in it ????

[@NickPixelTV]

Hmm u sure it didnt just get wet and start slipping

[@matthewhickey4010]

@@NickPixelTV ya that's what happened

[@paulmccown753]

Did exactly this. Secondary clutch now locks up when in gear. What the heck?!

[@NickPixelTV]

Paul McCown can you explain a bit more. Ive changed like 3 belts on this machine never an issue. Sorry to hear that your machine is having issues

[@waynewillis66]

You need to adjust the belt tension .

[@kgamesh]

Reset belt light 😢😢😢😢

[@heribertomedina6490]

I have a 2020 750 n recently got stuck in a mud hole i floored it n smoked up my quad now I hear knocking coming from that area haven't taken it apart yet but could it be just a belt damage or clutch aswell?

[@NickPixelTV]

You probably smoked or shredded the belt. Take the housing off and see if the belt is damaged. I have also had this happen

[@NickPixelTV]

You’ll tear a belt typically before you damage a clutch

[@Dat-plati]

Why do you look like legends gio

[@NickPixelTV]

Lol

[@Dat-plati]

😂

[@jakegullickson89]

Story of the lost 10mm

[@ourpresidentswallows6017]

Dude it’s making noise cause you have a bolt missing haha. You shittin me. You can’t leave that cover without the bolts in there haha. There’s probably half a trail of garbage in your clutches lol. Good luck with that

[@NickPixelTV]

Theres nothing in my box bud. The old belt was trash and i put a replacement in the top after the video have done it before

[@ourpresidentswallows6017]

That belts trash. OEM kawi belt only

[@NickPixelTV]

I believe it's what I had at the time. I normally use a kawi belt. A belt is better than no belt

[@sylvainfraser1174]

0

[@NickPixelTV]

1?