Nissan 3.5 valve cover gasket replacement Murano and Quest

[@FixitFelix529]

click below if you need to buy the valve cover amzn.to/2MPoYjD click below if you need the gasket amzn.to/2TAkArg click below if you need to buy the silicone amzn.to/2UHIZeH

[@robertocruz1201]

you don’t have a video for the back valve cover gasket

[@therenegade1735]

Hey dude why didn't you change the other one??? was it too difficult for you...?

[@parmeetdhillon8890]

it’s not leaking why would he

[@pnv8477]

It was kind of hard to tell, but it looked like there may have been cracks on the tube seals. Those tube seals are also nonserviceable so the entire valve cover needs to be replaced if that’s the case . Again, I did pause the video and zoom in. I’m pretty sure I saw cracks on some. Mine was the same with cracks, just replaced both yesterday.

[@AllanWatney]

Thanks for the video. Just a note, you don't actually have to remove the spark plugs, but you should replace the spark plug coil tub gaskets with a new valve cover..

[@RedBoyPooh]

just said screw the rear valve cover huh? the one that requires actual work? oh okay yeah

[@anthonycollins4914]

Is this about the same as a 2009 Nissan Murano?

[@vincentlambert2911]

Hey Felix my name is Vince, and I have to ask you what should be done for a code po732.. Now because of the mileage it tells me that seven items need attention.. The set of seven items is 5% replace catalytic converter 8% replace camshaft sensor CMP 8% replace camshaft pigtail 6% probability replace intake manifold runner control solenoids MRC 8% probability replace ignition coils and negative battery cable 8% replace O2 oxygen sensors 5% replace air fuel ratio sensor AFR now is all this really necessary in order to get rid of this code PO 732

[@C000DY]

I have a 2009 murano. And I am not a mechanic at all.. She won't run.. Got hot one day and just stoped.. Now I'm at a loss.. Have no idea what to do.

[@pnv8477]

Hope it worked out for you

[@richardr8465]

Do you have a video on rear valve cover gasket replacement,mines leaking and hitting exhaust pipe and stinking the car with oil smell

[@charlotteberry9492]

Thanks for this video I have a 2006 nissan murano Had the same problem I did it myself by watching this video

[@FixitFelix529]

Nice!! I am happy to hear that. Thank you

[@ChicoDeon]

ThankYou Sir

[@j-anaya3624]

Thanks for the video. I'm going to do this today. Lucky for me the front is the one leaking. UPDATE: replaced it today and pretty much just as you said. Only issue was sliding the new cover under and through the wiring without knocking the gasket off the cover. Had to remove again and place gasket back but second time I was more careful and got it in just right. Also made sure to use enough rtv on the left side corners. Thanks for the video.

[@NFLYoungBoy223]

Hey anybody I have a 2007 Nissan Murano with 193,000 miles and I was just doing preventive maintenance by changing the valve covers because when I changed the spark plugs at 170,000 miles one spark plug was covered in oil the ceramic and where it sparks at and changed the 3 rear ignition coils but anyways this week I replaced the valve covers front and rear and that took me 4 days since it’s very cold in Chicago and it was snowing and so when I was working on the front one I had the front ignition coils in a drawer and they were kind of getting snowed on so I just wiped them off and closed the dresser to dry them and install them tomorrow so when I put the car back together I had a code that read P0081 then I looked around the engine and I just reconnected a harness and I reset the code then it was running fine for 30 seconds then it got to running rough again and got a code P0300 and wonder if it’s the front ignition coils but I replaced all the spark plugs at 170,000 miles and only the rear 3 ignition coils

[@trey6543210]

25% of the work the video was promising. other side and all the coil seals need changed to finish with intake manifold gasket to rebuild

[@NFLYoungBoy223]

I love my 2007 Nissan Murano with 193,000 miles but mine does leak oil to I had to change the spark plugs at 173,000 miles and did notice 1 spark plug covers in oil and figured that was a valve cover gask

[@lalolalo1233]

Felix, you forgot a link for the sparkplugs. Can you direct me to one with not so expensive ones but close to the originals? Thanks man and yeah, nice vid!

[@higherpowermeditation557]

I like the way u explain the step by step procedures.. Great job.

[@gustavofuentes7942]

Le cambiaste solo la d un lado del motor en V q sucede cn el q está al lado de la admisión?

[@mef12727]

Remove in any order. But when tightening you need to follow the torque sequence

[@arturolanderos4450]

You didnt Put the glue in the gasquet?

[@jd_stash3934]

Helped me out so much thank u

[@NFLYoungBoy223]

I Changed the valve covers on my 2007 Nissan Murano with 193,000 miles and now it runs fine for 30 seconds than starts misfiring I got a P0300 code

[@Tootoojackson]

Check the coils and new spark plugs p0300 is a random misfire

[@gabrielrojas2940]

Where are you located so you can fix my car

[@alex-amal89.]

А другая сторона клапанной крышки?

[@georgepulido3258]

One quick question bro is the front valve cover considered the right or the left

[@relativederp8497]

Left

[@scottfirman]

Thats the easy one, try the back one.

[@Larry-d6r]

Very good

[@edwardofrias8220]

Gracias Manito

[@limingyao9503]

Nice video

[@sigidelapaz254]

Nice job

[@abramrodriguez3898]

Thanks

[@FuninallQueenieKavya]

👌🏻

[@VeronicaRodriguez-mu9yx]

Thanks for this!!