Nissan Altima Thermostat / Water Valve Replacement

[@hectorres286]

Less music, more camera angles.

[@gregsullivan8065]

Thanks for a good how to video. Not sure why folks are throwing the hate on the music or your narrative. Seems pretty clear to me.

[@terryallen5451]

Being a bit of a novice ,i just couldn't see enough of what you were doing

[@rafars2246]

That funnel is awesome. Never saw it before.

[@truger4u]

best video on this task ive seen especially the explanation on the orientation of upper valve, and the purpose of bleeder holes on valves, great job Thanks.

[@contactjunior909]

Good instructions but needs a lot less music and a lot more close up shots

[@angelcolon1644]

Awsome job.i like how you showed it step by step.thumbs up.love the video.

[@nicholasparisi3002]

Mechanic is clear & easy to understand. Need far less or no music & some really good close ups. His back is to the camera most of the time when he's working on removing the key parts. Did the mechanic install a gasket on the water valve t-stat prior to replacing???

[@reyesracing7630]

Thanks for the comment, greatly appreciated. The Thermostats come with an O-Ring on them so no need for the conventional gasket or silicone.

[@cameranbarbieux2802]

Thank you for the video! Makes perfect sense. Music isn’t a poor choice or too loud. Those that can’t focus while music is playing are soft and have weak bloodlines.

[@linoperez5816]

Hey thanks for the close ups! Great video

[@gonuclear98]

Clear and to the point. Thank You

[@nhatvule6705]

Very informative about the overall procedure. But it would be nice if you re-edit the video by inserting the close-up how you replace the thermostat as well as the tricks. Again thank you and keep posting new videos.

[@miguelangelv.galloarce9248]

Good video, I only have a doubt about the torque needed for each bolt?

[@MC-ph7gr]

Hello. I have a 2010 Altima 2.5L. My check engine light is on due to a thermostat warning. My engine heats up a little late but not too late. When I took out the thermostat, the top part was completely close and the bottom completely open. What can be the problem? TY

[@karenbarr3928]

Thank you great tips, on how to get the job done right.

[@war47war]

Ok I am late to the show ..working on the car now.. that metal pipe next to the main thermostat, do you need to remove it to get to the bottom bolt?

[@nathanielcurtis270]

shut the music off. hard to hear or understand you.

[@johnfredrick5339]

I really enjoyed that video I have a 2007 Nissan Altima by the way where did you get that funnel and what did you say the name of it was

[@anthony.fsanchez1176]

Great video my man ! I was wondering about that funnel you used at the end ,Was that used to prevent air bubbles going into the system so it doesn't overheat? I noticed u never mentioned an air bleeder valve like what my Dodge charger has whenever I have to work on my cooling system I always have to bleed it out or she'll overheat.

[@davidgoodman8542]

Dude this video shows how to do nothing. Like people need to see what ur taking off what it looks like c'mon man

[@cameranbarbieux2802]

C’mon man, he’s not doing this for people with a Chevy Cruze. Like, whoah, he might be doing this for people with a level of comprehension higher than a toaster.

[@jeffreyharvey4542]

Did I miss the part where you which thermostat goes in each location since they have two different temperature ratings?

[@robertetcitty5798]

Pretty much what i needed to know.. Thanks for info

[@robertetcitty5798]

@bryan guilliene there might be a crack in one of the hoses or the heater core crack.. Otherwise it's probably needs tighten on the hose clamp

[@davanansalick6126]

Thanks bro! Awesome stuff man

[@MrTeltel06]

Fantastic Video! Thanks a lot.

[@Sunshine58051]

Very professional. Thank you sir!

[@leewilliamson3367]

Very helpful video! Thank you!

[@4mbrad642]

Very helpful! Thanks

[@jamessolorzano7537]

Only video on KZbin on how to swap thermostats for this model Nissan. No close up. just points at the engine 😒 very helpful! it’s the two bolts right there and right there. Dude there’s 10 million bolts on the entire car! Where at exactly!? Zoom in! Then work

[@2plus2niloko]

what is the used of this video if i can't see what the hell are he doing...

[@MauriceD101]

I have a video on my channel for anyone to refer too. More detail in where the bolts are and what needs to be removed.

[@aarongrady3186]

Great Video, does the thermostat with only 2 bolts (the easy one) require a gasket? Thanks

[@reyesracing7630]

it doesn't have a traditional gasket. the thermostat has a built in o-ring style gasket around the outside of the thermostat itself.

[@aarongrady3186]

Thanks for the information! That's all I needed to know to start and complete the mission.

[@antoniojimenez372]

Great video and how much a mechanic would charge for this job

[@percspot872]

Top thermostat the 200*? Lower 180*?

[@kalansi35]

Would’ve been better to have someone recording up close so we can see what are you doing which bolts are you removing. you left the camera far away The music is louder than you

[@MauriceD101]

Khaled Alansi please refer to the video on my page, more detail and explanation

[@playero5656]

Great and helpful. I just changed my Thermostat on my altima . I put the top Thermostat backwards the 1st time. After watching your video i fixed it. Could it be messed up now. Cuz my car is still overheating.

[@pono321]

Hahaha

[@zoinbergs]

The official FSM's specify both facing SPRING TO BLOCK.

[@luiszelaya2823]

My God, that bolt right underneath the heater pipe defeated me. The problem is that the heater pipe needs to be removed in order to get access to that bolt. I removed the front bolt of the pipe and there was no way it would come off... I wish you showed with a lot more detail how to remove it.

[@patrickhamilton565]

Luis ZELAYA I spent 3 hours on that POS last night. I hope it’s not as hard to get back in

[@zeusleon1954]

Any advice on taking that heater pipe out

[@jeffs2242]

Are you sure the direction of the top thermostat? The diagram of the part I bought shows the spring side facing the block

[@sheeshalready]

Yes, the diagram shows spring towards engine. However, when I removed mine, spring was facing away from engine. And, every you tube video of someone working on the 2007 Altima, also, facing AWAY from engine.

[@MauriceD101]

please refer to the video on my page, more detail and explanation

[@zoinbergs]

Personally, I'd trust the official FSM's on this topic that specify both thermostats facing SPRING TO BLOCK.

[@douglasthompson9482]

Good video…thank you

[@davanansalick6126]

Wowwww...I actually just peeked at the comments below...people can be people sometimes it seems...anyways, I thought u did an awesome job of presenting...good on u!

[@JohnwOrtiz-eh9zn]

Yes he does good work but honestly that loud music is a distraction and as a professional im sure a boss would not like u listening to such loud music i need to focus on the job t hand especially if ur going to explain it to someone els.

[@davanansalick6126]

@@JohnwOrtiz-eh9zn ...”as a professional”...a most often misused and ill-conceived phraseology...pardon my French, but what the F does that mean...some do their best work while jamming out...not everyone is a damn square...and I’m damn glad of it...have a great day sir

[@Twobarpsi]

Why do these engines have 2 thermostats?

[@terryallen5451]

Loud irritating music.

[@anthonyolvido9890]

Where are you located? Can I bring my Nissan to you for the same service?

[@skybleuh24]

Can you do a video of how to replace a radiator on a 2007 altima? Great video btw!

[@Ghst95]

Junie luv that’s easy you can find it on KZbin

[@glennfonsecaii4206]

Probably a dumb question but is the 2 thermostats the same? I gotta change them P0128 code came up. I already changed the sensor so i gotta change the thermostats now. 2007 nissan altima 2.5s (4 cylinder ).

[@MrLilNizzel]

Glenn Fonseca II you want to change the 1 in the front for that code the main thermostat

[@MauriceD101]

Glenn Fonseca II please refer to the video on my page, more detail and explanation

[@victorgaytan5771]

Buenas tardes y el termostato que esta abajo maneja una velocidad y el grande maneja la segunda porque en mi caso mi altima 2008 2.5 si arrancan los abanicos pero a muy baja velocidad y hierve el depósito del refrigerante cual termostato me recomiendas checar saludos desde saltillo,coahuila

[@richardhenry886]

I wish you could actually see what you're doing

[@johthor]

Please, please, please put the camera where we can see what you are doing. This is not the way to make a repair video. Check out what other KZbinrs do when they make a repair video.

[@cameranbarbieux2802]

Good thing he doesn’t require your validation or to conform to what anyone else is doing. Welcome to KZbin. If the difference between his video and others causes an anger within you, you are showing signs of autism. Not a bad thing. Just learn how to cope with subtle differences and you’ll manage nicely.

[@usagiv1rus536]

@@cameranbarbieux2802 😂😂😂 bro stop dick riding I've seen you comment on everyone else's comment defending the KZbinr be realistic not everyone is gonna like the video

[@chfrazier]

That was good.

[@moamenhelmy9510]

which one of those should I change it frequently as a predictive Maintenace?

[@MauriceD101]

Moamen Helmy please refer to the video on my page, more detail and explanation

[@Dollar714]

When filling with coolant, how long did you keep the engine at 2000 rpm ?

[@reyesracing7630]

I think I ran the car for about 5 minutes. It's best to run it until the fan turns on.

[@keithwaring3799]

Are the 2 thermostats the same part number...and wht was the issue with the car in the video did they need to be changed..

[@reyesracing7630]

The two thermostats have a different part number... check the video description if you need to replace one or both. The car had a thermostat that stayed open because it would take a long time to warm up.

[@LiilTyweezy]

But how do you know which one goes where

[@johncasey4310]

How about getting a direct fit cat on a driver's side 2004 Audi A6 3.0 ...without being up in the air

[@guirlainenoel8739]

Please net time cut the music so i can hear u and focus

[@KMM667]

music too loud friend I can't hear anything you say

[@juliof9670]

Leave. Metal gasket on and put new on top to aboid leaks soft gasket wont stop leaks double work. It happen to me. Then i left old metal gasket with new on top and good as new. 👍

[@soldierf5680]

I’m sorry, what was the point of this video?we can’t see damn thing!!!!smh...

[@rbntamez]

Hey when replacing the Main thermostat do you still need to drain the coolant?

[@rojeliolopez2632]

rbntamez hhjjjkoovgkoppjkkopouiooftvhhjjjpppppoppuiitgvmKj e Ed v ecezezbtc j👯‍♂️👯‍♀️👯‍♀️👯‍♀️💅🏾ob. Bb XX.

[@poloridesolo33]

DUDE FIRST MISTAKE YOU MADE WAS TRYING TO DRIVE THE NISSAN UP ON PLASTIC MADE RAMPS ON A POLISHED FLOOR??? WTF??? AND GET RID OF MUSIC!!! BAD VIDEO FROM THE JUMP. PERIOD...

[@Jedi_Luke]

Terrible video. Unnecessary music and the camera is way too far away.

[@roberey6821]

Good video just what i needed to know..

[@marv.mon.9845]

Honestly bro you have allot to learn about making an instructional video. You lack allot of confidence when your explaining things. You may want to invest into a head cam since you don't have a camera man. I admire your enthusiasm but maybe take the time to watch other KZbin channels before going on your own. Don't give up keep trying! Good luck

[@MauriceD101]

Marvin Moncevais please refer to the video on my page, more detail and explanation

[@renemanubes6400]

How to change the heater cooler from odyssey Honda??

[@soldierf5680]

I like your intention, but very poor explanation.

[@nunyabizness1079]

Can't see a thing you're doing once the air box was removed.

[@cameranbarbieux2802]

It made perfect sense to me. If you have an Altima, you know what he’s talking about. If not, then this video isn’t for you and doesn’t need your validation. Hope your thermostat replacement is successful.

[@blackhawks1870]

How much would this job cost

[@curtisbeedles4363]

Can't see what your doing

[@cesarsantini4370]

How much antifreeze came out

[@reyesracing7630]

I didn’t measure the amount that came out but I put about 1.5 gallons back in.

[@cesarsantini4370]

Reyes Racing thank You! Can you post more videos about repairs on the Altima!!!!!

[@ProWilson21]

Turn down the music and show what you are doing not your face🤨 I have no idea what your hands are doing down in that area…🤔

[@je-voughnmcgregor5929]

Horrible video man can’t see anything your doing

[@erinf4092]

The music makes it very hard to hear. And, we can't tell what you are doing.

[@cameranbarbieux2802]

This ain’t a tv show. Do you have an Altima for reference? Because I do, and it made perfect sense. The music is lower than the voice, take your ADD meds.

[@petertyrrell6690]

why the awful music?

[@altafmubarak]

You shd have show the thermostate how you are removing

[@cameranbarbieux2802]

That would require taking off both radiators and grill. He explains what he did. He doesn’t required your validation.

[@chickenmansgames]

Are both thermostats the same?

[@dealerauctionnightmare4689]

No, the front one is 180 deg and the side one is 203 deg.

[@robflores640]

Gauge going crazy but car dont overheat is the thermostat the problem or sensor idk

[@soldierf5680]

Usually heater not working(blowing cold air)is first symptom of failing thermostat. Of course engine light on.

[@sheeshalready]

For the upper radiator hose thermostat, the diagram shows spring towards engine. However, when I removed mine, spring was facing away from engine. And, every you tube video of someone working on the 2007 Altima, also, facing AWAY from engine. For the life of me, I could not get my thermostat with new or old seal to squeeze back into the recessed housing. I finally had to remove just a hair of material around the thermostat itself (decreasing its diameter) in order for it to fit properly, and it was genuine Nissan from the dealer. Another thing, my original thermostat was 95c, while the replacement was 82c. Dealer says they changed it, just like they changed the radiator cap pressure threshold.

[@leakyjeep5.9]

What year and motor?

[@dankpotato7817]

Every Altima of this type has the same place where paint fades out.

[@Whirldwind.Thru.Cities]

Horrible video, i think you should come to my house and show me how you do it on my car so i can see. If your going to save me money save every penny not just half.

[@jerylcarter330]

Can't see what you are doing.

[@vashnigraham4384]

Great job safety first. Always disconnect ur battery.,

[@rodrigoboleche6385]

Not very thorough..sorry..try again

[@MauriceD101]

Rodrigo Boleche please refer to the video on my page, more detail and explanation

[@TryMeFoolYT]

i cant hear u nor see anything bye felicia

[@victornunez1587]

the top thermostat goes with the springs away from the block

[@norbertocartagena2487]

Always try to take pictures when disassembling to then put parts back.

[@jeffs2242]

The part I got shows the springs of top one going towards the block. Which is correct?

[@zoinbergs]

The official FSM's specify both facing SPRING TO BLOCK.

[@mgarc1960]

Why music in the background,? distracting.

[@cameranbarbieux2802]

And you are?

[@jonathanmurphy3282]

Next time make it without the music. Very hard to concentrate

[@teriwilliams4255]

Can't see anything ugh

[@MauriceD101]

Teri Williams please refer to the video on my page, more detail and explanation

[@jkhan08]

Why music tho? Hard to understand especially you speak low. And it would’ve been helpful if the camera showed the engine bay.

[@cameranbarbieux2802]

Music came as ADD kids might get distracted by the lack of action by coolant pouring. Now the autistic have a problem focusing while low music plays. He doesn’t require anyones validation, but I heard and understood what he was doing just fine.

[@speedwrenchmobilemechanics6089]

70s porn music and no info too funny

[@randy80ism]

On that thermostat on the bottom do we have to put it on? Can I guess we're moving and leave it out? Lol

[@pfconrey]

Great info; music is too loud.

[@baccaraty]

I left the video from 2. min just because of the music.... bad choice

[@cameranbarbieux2802]

Imagine being so fickle, that music in a video makes you leave.

[@ronkey4796]

Horrible video & music !!!!!!!!!!!!!!!-

[@pono321]

I love it it's good video

[@yazmingamboa6834]

I too cant see anything till its removed...👎👎👎

[@christophermayes3035]

get rid of the music

[@Charlies_Outdoors]

Good info but the music over you explanation of what to do is annoying

[@JohnwOrtiz-eh9zn]

Im sorry as i said last time we can't hardly hear you with that loud music in the background u really need to fix that issue first before u explain about any repairs to any cars ok i do work on cars and i would never have loud music distracting me please fix this issue first thank you.

[@cameranbarbieux2802]

I can hear just fine.

[@timothyfakhoury8466]

Is this a 6cyl

[@gregsullivan8065]

Definitely not a six cylinder. This is a 2.5S. You can tell by the plastic wheel covers, and the plastic sound insulator cover on the motor. As well as the exhaust heat shield in front.

[@otto63dec]

good video but turn the music off please

[@kanedalokk5245]

Horrible demonstration

[@LifeOffTheWall1]

Fucking horrible. No close up of screws/bolts no instruction on taking out parts needed for repair

[@cameranbarbieux2802]

Maybe you should make a video that does. Good luck with removing both your radiators and the grill.

[@shaunaird2133]

Can’t see shit!!