Nissan Rogue 2014- 2019 Brake Light and Assembly Change! Easy

Having properly working brake lights is crucial to the safe operation of a vehicle. Over time all brake light bulbs will go out and need to be changed. This video shows you how to change out your brake lights, as well as your brake light Assembly on a Nissan Rogue 2014-2019!
To Support Flashback502, please send donations to:
PayPal: www.paypal.me/...
Or
Fan Mail, Products & Donations:
Flashback502
Po Box 20201
Louisville, KY 40250

[@Constantean21]

This worked like a charm on our 2015 Rogue. They tried to charge me $80 at Firestone but when I said they didn't clarify that to me they lowered it to $60. This time I went to my local shop and got a pack of 2 bulbs for $12 and it took us 15-20 mins to change the bulb. Thank you so much!!

[@Flashback502]

You're very welcome! Glad I could help you save some money. Please subscribe like and share and check out our other helpfull videos

[@RiddimG]

Friendly tip for everyone, don't use a screwdriver. It makes the job way more difficult and it may scratch the car and crack the light. Just pull the brake light out from the back. The screwdriver isn't needed.

[@Flashback502]

Thanks for tip agree. Please subscribe like and share 🙏.

[@mc50992]

Oh, perfect. Thank you. I've watched a few of these that are longer than yours but still didn't include the details that I wanted. Your video is absolutely perfect. All the information that I wanted, nothing extra and nothing left out. Just every relevant detail. Thank you.

[@Flashback502]

Your very welcome glad could help. Thanks for commenting hope you check out the rest of our channel and sub

[@DebbieVeneable]

Excellent video! As a 57 year old woman determined to save money I followed your video and successfully changed brake light and did the little white bulb since I was there. If I realized there were 3 I would have done the 3rd! I did have to use the screw driver as light would not budge. I put a medical glove over the screwdriver and gentle pushed and it was easy to remove the light. So proud of myself! Thank you again!!!!

[@Flashback502]

Your very welcome glad could help thanks for tip.

[@themonstersquad4526]

I don't usually ever comment on youtube, but thanks for the info, i also never knew that about touching the bulbs so i appreciate the extra info as well. Just finished replacing and it worked perfectly!

[@Flashback502]

Glad I could help!

[@bobg6715]

Thank you Sir for this video, my driver side brake light just went out after 170K miles on my 2018 Rogue. This gives me a clear direction on what I'll need to do to get this task done... much appreciated!

[@Flashback502]

You're very welcome

[@Coconuthippie21]

This was such a good walkthrough! Made it super easy- worked a charm on our 2015. THANK YOU so much for making such a thorough video!

[@Flashback502]

You're very welcome! Glad I could help. Please subscribe like and share and check out our other helpfull videos

[@willistjohnson2543]

Just pull on it like a man using a screw driver will mar your paint job , yanking on it fast will pop it out just fine 😎

[@Pinkerbellx2]

Hi, I ordered a new brake assembly and it came and has all new wiring. I could easily swap it out after watching your video but with all new wiring I don't know what to do!! Any suggestions? Thanks. :)

[@Flashback502]

Should have converters so that it connects to your old plugs. Hope you get it fixed. Please subscribe & like and share if haven't already and check out our other helpful videos

[@plsmh3933]

🙋🏾‍♀️Thank You; was easily able to change my brake light!!

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@johnsereda9666]

Well done, explaining how the tabs go back in place is a great detail to include for reassembly.

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@carolinag211]

Your Video is Awesome! The dealership was going to charge me $35.00 to change the bulb, the bulb cost like $10.00...this was an easy task to do and you made it really simple..thank you n have a great one!

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@SpanisGuitarBest]

muy bueno gracias

[@dbokdbokdbok]

Good to know, things have changed over the 60 years that I’ve been driving.

[@MH-sh1er]

This video probably saved me about 150 buck to have the dealer change my assembly for me. Thanks for the video cheif.

[@Flashback502]

You're welcome glad could help please subscribe.

[@vipergtsmre]

Sweet, TY! I've owned many Rogues, but never had to swap a brake light bulb until now.😮

[@Flashback502]

Glad I could help

[@firstladyshelly6002]

Hello young man, You examples this step by step and I'm a woman so I can do this! Thanks so much! I don't like going to shops all day for a small job. Great job. Even touching the bulb with oily hands!

[@Flashback502]

You're welcome! Definetly dont touch the bulb with oily hands. Please subscribe like and share and check out our other helpfull videos

[@kriskane5450]

Thanks for the help! Wasn't sure how to get the light assembly off until I watched your video. Great point to cover your screwdriver with tape so not to scratch the paint.

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@Imperial_phantom13]

Thanks for teaching me bro. I’ve been trying to this for a long time and finally found you to teach me. You’re a legend 💯💯

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@nessay720]

Do not use a screw driver, it will take the paint off your car, even if it coated with tape. It the light assembly is stuck, go buy the correct plastic tool to remove it with for a few dollars at your auto store.

[@Flashback502]

Yes if light is stuck get a plastic tool to be sure u don't scratch paint.

[@WCGwkf]

Thanks to nissan design, the tail light trim is now broken! My Toyota has an access panel.

[@Flashback502]

Sorry to hear that.

[@TheSnappleman75]

Good video thanks

[@Flashback502]

You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos

[@Judge786]

I have 2016 Nissan sv model (usa) . Does 2017 model taillights work with 2016 i wanna modify taillights?

[@mavargas8701]

Hey got a question about the rest of the tail light attached to the trunk door. Does that require taking the whole back panel off?

[@JJL-1962]

I couldn't get it to budge. I was worried that using a screwdriver might crack the assembly. I finally tried a thin putty knife (with tape on it) and that did the trick. Of course I was given the wrong bulbs and have to do it one more time. lol

[@stephenianiere7330]

This is awesome. I need the whole replacement. Thanks for showing that, too.

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@wbmaxon]

Excellent video. Thank you for sharing.. Subscribed.

[@Flashback502]

You're very welcome thanks for sub.

[@shyamsriram2335]

Nice Expert walkthrough, thanks a lot

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@jeffreygamss6990]

You made it seem so easy but I didn't know the part number for the driver side housing. I contacted the Nissan dealer and was told the part number for my vehicle after providing the vin# is 26555-6FL0D. Wrong connection piece! My vehicle has the same connection piece for the entire housing as the one in this video, only on the driver's side. what part number is it?

[@Flashback502]

Sorry not sure I no longer have vehicle. Please subscribe & like and share if haven't already and check out our other helpful videos

[@wiggypop]

wahooo, you make this look easy! we gonna be changing our brake light tomorrrow.

[@rebeccabassett7043]

Excellent... you made it so easy for me to do the work myself .. thank you for this video :)

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@chrisvincent8613]

Great Video!! The explanation was spot on!! Thank you. I cracked my driver's taillight assembly. I'm changing it out tomorrow.

[@rs-op8bb]

Thank you!

[@ronaldmudenyo6281]

Thanks for the video. Very helpful

[@ShawnGS300]

Do you know if the 2017 to 2018 Nissan Rouge Taillight Assy will fit on the 2016 Rouge?

[@Flashback502]

Sorry not sure.please subscribe like and share and check our my other helpfull videos.

[@3Oui]

Concise!!! Thaaank you!!!!

[@Flashback502]

Your very welcome please subscribe like and share and check out our other helpfull videos

[@isabeldrinkwalter2633]

Thank you. Your instructions were so clear. I appreciate it.

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@adilfrandjean3326]

I have one 1questien sir I have a rogue 2015 can I put a light rogue 2017

[@vmack1851]

Great video. Thank you!

[@jacquid3618]

I wish the shop I went to saw this! Basically caused $$$$$ damage to the paint - should not be this difficult to change out a bulb!

[@Flashback502]

Smh, Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos

[@vMXRIX]

I got new tail lights for my 2016 rogue, Thank you for your video!

[@Flashback502]

Glad I could help!

[@1818omotunde]

Thanks very informative

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@lawrence4520]

I have a problem with the middle light on the assembly-its the night light, how to change that ?

[@karengroenweghe2246]

The guy at O'Reilly's tried but couldn't figure it out. Thanks to your video I did it myself! Wrap the screwdriver tip!! Thank you :)

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@douglasamundson7869]

Thank you!! Very helpful and saved us some $$$$!!! Took less than 10 minutes!!

[@Flashback502]

Glad it helped!

[@josiahoakley8656]

Good video. All helpful information and straight to the point. Thanks bro

[@Flashback502]

Your welcome glad could help

[@TheExtraTerrestrial]

Thanks, man!

[@Flashback502]

You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos

[@justinevasquez8867]

thank you for these videos! i live far from my dad and my reverse light went out

[@Flashback502]

Your welcome please subscribe like and share and check out our other helpfull videos.

[@tahkew]

I can’t get the brake light to come off even with a screwdriver 😢

[@juniory8489]

What should I do if I changed the bulbs and sometimes they work and sometimes not.

[@Flashback502]

Sounds like Bad or lose connections. Also Could have dirty contacts on bulb are in power plug. Please subscribe & like and share if haven't already and check out our other helpful videos

[@andygold]

Just for some clarification, you only have to worry about getting finger oils on bulbs that have quartz glass (halogen bulbs). If it's a regular incandescent bulb with non-quartz glass then there's no worries. The issue is that the halogen bulbs get a lot hotter than standard incandescent bulbs and the oils on the hotter quartz glass will cause the glass to turn black and crack. To get rid of any oils, use a clean paper or cloth towel with rubbing alcohol on it. Using just a towel alone is not enough to remove the oils from the glass.

[@Flashback502]

Thank for helpful information. Please like subscribe and share.

[@hi5338]

Can you make a video for replacing the assembly of the taillight that is on the trunk portion of the rogue?

[@Flashback502]

Will look into it 👍Please subscribe & like and share if haven't already and check out our other helpful videos

[@MakeupLover04]

This is supper helpful! Thank you

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@carsonstidom3521]

Thank you man, that was super helpful and easy to understand and follow along. Much appreciated!

[@Driftwood2211]

Thank you for the video as it helped a lot.

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@deeblair1026]

Thank you very much! Your video was very easy to understand and follow.

[@Flashback502]

Your very welcome!

[@GINAAGONZALEZ]

Thank you

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@joeponce9053]

Awesome thx

[@Flashback502]

You're welcome! Hope you subscribe and share

[@noahp4261]

Thank you! I don't know anything about cars. This is very helpful!!

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@Quacks0]

If you touch the bulbs with your bare fingers, you should use isopropyl (rubbing) alcohol to moisten your paper towel before cleaning the bulb, not just wipe the bulb with the dry fabric. The grease and salt from your fingers need to be actually dissolved and removed thoroughly.

[@MichaelS884]

Thanks for this video brother…..very helpful!!!

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@brounds6431]

Thank you very much. Very helpful!

[@Flashback502]

Your very welcome👍, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@robindauzat6756]

Thanks!

[@Flashback502]

Your very welcome! Thank you very much for your support of our channel! It means alot! 👍🏿 👍🏿 Hope you subscribe, like, and share!

[@JackDionne]

Now I know, thanks for helping me out!

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@sheridan1001]

Great to the point video! Thank you! spot on!!

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@Domico99]

Thanks. It was clear and precise. Have a good day sir.

[@Flashback502]

Thanks, you too! Hope you subscribe like and share.

[@mikelisse]

Thank you for sharing this. Thorough explanation and easy to follow.

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@akeemmartin3056]

Thank you so much.

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@jamesboland7019]

Thank you. This was extremely helpful.

[@Flashback502]

You're welcome

[@Zamson30]

Great video! Thank you!

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@MiguelOrtiz-be8hq]

Thank you so much for your help!

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@rubamann]

I tried to change the tail light bulb on mine, but the new bulb didn't work. I don't know if the current gets to the circuit, also I want to know what type of taste can be used to check the current?

[@JoseSanchez-rq5ht]

The you have any ideal luck this situation may Ac I trying to charge no take any freon inside the dash board the temperature is _40 please the you have anwser for that thank you again brother

[@johnwillyn]

Hello. Does anybody know if the 2017+ (facelift) taillights will fit in a 2014-2015 one??

[@butterflybaby444]

Thank youuuuu you are so good at explaining stuff

[@Flashback502]

Happy to help!

[@pertorres]

Where can I buy the bulbs? From any auto store?

[@Flashback502]

Yes.Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos

[@Panameno7809]

Good video and very explain I hope you make more videos

[@Flashback502]

Will do ☝ Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos

[@ChiRickyboy]

I was wondering if you could explain which fuse is for the backlight?

[@rs-op8bb]

Thank you!

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@GONZALUMA]

Thank you for the tutorial!

[@Flashback502]

Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@youweretheonlyone]

You rule! Thanks for teaching me 😊

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@JoseSanchez-rq5ht]

Thank you to teach me to change brakes light

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@joshh8833]

Thanks bro!

[@Flashback502]

Your welcome, glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos

[@dabar8801]

Thanks, great video!!

[@Flashback502]

Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@erinlubben2889]

What kind of brake lights are these?

[@Flashback502]

Just stander.Please subscribe & like and share if haven't already and check out our other helpful videos

[@mindiseverything5036]

Doing one now

[@shyskylark]

Super useful, super clear, thank you very much!

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@garrymoore335]

Hi hi

[@Flashback502]

Please subscribe & like and share if haven't already and check out our other helpful videos

[@zulikassim1909]

Thanks good instructions.

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@cheleesawoods26]

Thank you for this video! Very informative and quick to the the point

[@kathywright9578]

Doesn't apply to 2017

[@davidcorona1665]

Brother, you are a life saver. Thank you for this video

[@MrGwelenc]

Thank you

[@Flashback502]

Your welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@donf3268]

Very helpful

[@Flashback502]

Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos

[@ByteCrawler]

Thanks for the clear instructions. Just a tip I found a small hard plastic putty knife to be the best at popping the housing out without scratching the paint. It’s able to fit in the curved gap and gives a stable point to punch the top of the handle to release the clip.

[@Flashback502]

Thanks for tip 👍🏾Your welcome glad could help please subscribe like and share and check our my other helpfull videos.

[@duanemiller471]

I got all the screws loose and went to push light back but neither side will move. It was almost like something else was holding it place. The easy his came out was because he already had them loosen. When I pushed all I did was chip away at my lens cover.

[@chicksvp]

Saved my life in these streets thank youu

[@Flashback502]

Your welcome glad could help please subscribe like and share and check out our other helpfull videos.

[@DeluxnBonifide]

Is this the same for 2009 model?

[@Flashback502]

Sorry but I'm not sure you should be able to find a video on KZbin for your model year. Please subscribe & like and share if haven't already and check out our other helpful videos