Nissan Versa Radiator Fan Replacement/ Cooling Fan Replacement (2012-2019)

This is a video on how to replace your cooling fan/ radiator fan on a 2014 Nissan Versa 4 Cylinder vehicle. The reason I replaced this cooling fan is because this vehicle was having over heating issues for a while. This tutorial is good for any Nissan Versa from 2012-2019. I go over the tools you will need and the issues you may encounter. I am by no means a mechanic but I am a save money DIY kind of person. Hope this helps you on your adventure. Thanks for watching.
Link to radiator/ cooling fan below:
www.amazon.com/Radiator-Assem...

[@ucanfixit1]

Link to parts in the description!

[@alanrobertson5802]

Good job explaining the process. I need to do my son's car today, and you just made my life easier. Thanks!

[@ucanfixit1]

Hey thanks for watching. I couldn’t find a good video explaining the steps so I decided to make one myself. I’m glad it helped. Good luck on your sons car, it isn’t a hard job just take it slow and you’ll get it done!

[@Gpeeler]

Good job very understandable

[@sigma6656]

Thanks for this video brother. I just completed a fan replacement on my 2015 versa hatchback. Took me about 3 hrs, but I'm very slow and methodical when working on my own car. I took about 25 pictures on my phone ever step of the way. Just in case anyone is wondering, I managed to complete the repair without draining the anti-freeze or removing the reservoir. It was slightly more of a pain in the ass at one point, but I think it's doable. I was kind of gambling that it was the fan motor. I couldn't get a multimeter down there to check to see if I had 12V coming in at the harness, but I knew the relay and fuse were good. The weird glitch that made me gamble on the fan is that I turned on the car, maxed the AC, and then tapped on the motor housing (fairly hard,) when I did that the blades moved just a little bit. Car off, tapping on the housing, the blades don't move at all. This morning, when I got the old fan out, I ran 12V directly from the battery into both wiring harnesses (blue is +) and it didn't move at all. Totally screwed. everything good now, thanks again!

[@ucanfixit1]

Hey thanks for watching! Happy to hear you got it done and really appreciate the advice. I hope you subscribe!

[@ucanfixit1]

Hey thanks for watching! Happy to hear you got it done and really appreciate the advice. I hope you subscribe!

[@markrusso3994]

Where is the relay for the fan? I found the fuse in the fuse box and it’s good

[@sigma6656]

@@markrusso3994 It's been so long, I couldn't tell you. I thought it was near or in the fuse box off the top of my head.

[@trentbriver]

Going to do this job tomorrow on daughters car. Good job being able to get clear video in such a tight spot. Thorough explanation. Thanks.

[@ucanfixit1]

Hey thanks for watching and I’m glad my video could help! Hope the job was easy for you.

[@IronMatixXP]

great video. just what i needed. just picked up my new fan today and now I know how to install it thanks to your video.

[@ucanfixit1]

Hey thanks for watching! I’m happy to hear my video helped you! I found a lot of videos but none of them ever showed me how to install they had to much talking and not enough showing and that’s why I created my video so thanks dude! 👍🏽

[@Mark-gf4fh]

My brother.... mad props to you for making this video. Very well explained for the regular Joe like me. Took me a little bit, but I got it. Thanks a bunch!

[@ucanfixit1]

Hey thanks for watching! I couldn’t find any good videos explaining the entire process so I decided to do it myself to help others like me. Happy to hear it helped and good job getting it done. Hope you subscribe!

[@bobbydjunior]

Thanks Brother!!! Doing my daughters car tomorrow and you took all the guesswork out of it for me. Good detail and explanation.

[@ucanfixit1]

Hey thanks for watching and subscribing I really appreciate it! Happy to hear my video helped! It’s a pretty easy job so you should have no issues! Good luck 👍🏽

[@its_me_austy7062]

This is very well explained. On the clip you used the curved niddle nose. You can use a socket to remove. Luke 10 mm

[@ucanfixit1]

Hey thanks for watching! Also thanks for the suggestion I will definitely use a socket next time. Hope you subscribe!

[@carmelomartinez9330]

👍 nice thanks for the video makes it more easier 🤟👏

[@ucanfixit1]

@@carmelomartinez9330 hey thanks for watching. I really appreciate the feedback. Happy my video helped hope you’ll consider subbing to the channel.

[@akitasettongumi]

Omfg thank you! My car's been heating up every couple of minutes and I was told it was the fan! I can fix it now!

[@ucanfixit1]

Hey thanks for watching! The job is pretty easy just follow the instructions in the video and you’ll get it done in no time! Hope you subscribe. ☺️👍🏽

[@jessemoral394]

You're awesome bro. Keep it up 🙌

[@ucanfixit1]

Hey thanks for watching and taking the time to comment I appreciate your support! Happy to hear my video helped. Hope you subscribe!

[@alexandermeyers9104]

hey man great vid. good job showing the ins and outs. you need someone to invest in a shop for you. i would but the pandemic cost me too much already. keep goin😃

[@ucanfixit1]

Hey thanks for watching! I pray your bouncing back from the pandemic and I’m working on getting a small garage/storage unit to work out of thanks for the encouragement. I hope you subscribe!

[@djproblem300]

Thank you.

[@ucanfixit1]

@djproblem300 Hey thanks for watching. Happy to hear my video helped you out. Hope you get a chance to subscribe!

[@mikestephens1419]

Thanks .

[@ucanfixit1]

Hey thanks for watching, happy to hear my video helped. Hope you subscribe!

[@ernestthomas5281]

You don’t have to remove the hood lock or the clips that attached the cable and you don’t have to remove the airbag just swing the bracket to the drivers side ounce the bolts are removed

[@ucanfixit1]

Hey thanks for watching! Appreciate the advice I’ll definitely try it if I ever have to replace the radiator/ cooling fan again. Hope you subscribe!

[@mattkinnard9934]

Do you have another link for the fan. Looks like the one in the description expired. I bought an aftermarket fan from advance auto but it was way too small. Hoping to not make that mistake again

[@ucanfixit1]

Hey thanks for watching. Sorry about the link I just put another one that works and according to Amazon it should be an exact fit. Let me know if it worked for you and hope you sub to the channel.

[@BreashaMcElliott]

IS THE PROCESS THE SAME IF YOU ARE CHANGING JUST THE RADIATOR? SAME YEAR CAR

[@ucanfixit1]

Hey thanks for taking the time to comment. Yes the process is similar you just have a few more steps to get the radiator out. Thanks for watching and hope you sub to the channel.

[@TmarkN]

I would never be able to put all that stuff back together. 😕

[@ucanfixit1]

Hey thanks for watching! I felt the same way when I was doing this repair job so that’s why I made the video to help anyone that doesn’t feel confident and to show them they can do it!

[@kirkmo1666]

I don't think my fan is working. The only time it gets hot is running it parked. I never seen the fan on. I'm probably in denial. The A/C blows cool when it wants. Anyways thanks for the video

[@ucanfixit1]

Hey thanks for watching! You can actually test the fan to see if it works. You can either wire it straight to the battery or disconnect your thermostat to see if it comes on. I have a video on diagnosing the fan for a Honda but the process is the same. Check it out on my page!

[@kirkmo1666]

@@ucanfixit1 God bless you

[@TheGTA6Times]

I cannot discconect the fan wires to save my life why ????

[@ucanfixit1]

Hey thanks for watching! You have to hold the tab down with one hand then pull it apart with the other kinda like wiggle it as you do! Hope this helps!

[@sigma6656]

It's a pain in the ass. inspect the harnesses on the replacement fan and you should get a better idea of how to do it. It literally took me 15 min to remove both harnesses, but i managed to do it non-destructively.