No Motor Power Drive?? Ampd Bros E-Bike Loss of Motor Power Fix Tutorial

You may think its complicated but 99% of the time it is super easy to fix! We run through how to diagnose loss of motor power drive on your Ampd Bros Ace, Riptide or Chubbie Electric Bike and how to fix! If this does not solve your issue then please refer to your dealer of purchase for further help.

[@macw2234]

Hi from the Netherlands. Your advice was invaluable. My three wheeler wasn't working and your tip saved a fortune and tons of stress. Cheers mate

[@AmpdBros]

Wow thats amazing, glad we could help!

[@Maishu777]

Thank you very much. I have this exact bike and the motor stopped engaging on the peddle assist. I checked the wire cleanliness and connectivity. I also got out the Q-tips and rubbing alcohol and cleaned the magnets and censor on the sprocket. Nothing worked... still... Until I saw your video and you saying the little magnet wheel needed to be close to the censor and then I remembered how my little magnet wheel could spin and back and forth from that censor. So I pushed it up against the censor, picked up on the seat, and gave the peddles a go. Sure enough the motor kicked in like new. :) I was able to fix it. Thank you very much. I bought my Shimano off of Amazon and went back to possibly buy it again, but Amazon is currently out and might not get them back in stock. Again thank you very much. :)

[@davidpalacios8502]

rocking you this sums it up i came in sreach of advice and came away with the FIX .

[@francdubois7832]

Sir, thank you so much for this video. It turns out that I unplugged the pin cable by wheel hub when changing tyre. If it wasn’t for your fantastic vid I’d have remained totally clueless.

[@AmpdBros]

Wonderful, glad we were able to help! :)

[@thedarkproject]

Excellent tutorial keen them coming. Good to know toubleshooting!

[@AmpdBros]

Thank you! Will do for sure!

[@5kplamse]

just curious, do you know why my ebike motor cuts in and out when it reaches its top speed? why cant it maintain its speed?

[@CarlosFarra]

Solved the issue this is very helpful!

[@AmpdBros]

🙌🏻🙌🏻🙌🏻

[@theamazingmikelee9857]

Thanks guys. This video solution is a great idea.

[@AmpdBros]

Thank you! 🙂 we plan to do much more educational videos as possible to make everyone’s life much more easier! 😄

[@scottcairns9752]

Hey guys that helped I have the brake issue. Do you have a video on how to fix that?

[@stephendavis4480]

Was my brake sensor disconnect. Thank you so much!

[@AmpdBros]

You’re welcome 😄

[@user-zx9yy6lu9p]

My motor turns over with pedal assist but then stops turning over ,the sensor is blinking the pedals are tirning.only when the wheel slows down wil the motor re engage when i again pedal whats going on

[@molji5070]

Does anyone know how to factory reset lcd display e cycle

[@squeezerdsqueezerd2427]

What if your display won't turn on ?

[@sirgordan3279]

i have the carrera espec the dosplay is lit up but there is no pedal assist

[@AmpdBros]

If our mentions in this video don’t help then we would recommend speaking with your bike manufacturer more from here.

[@sirgordan3279]

@@AmpdBros i fixed it! it was the crank sensor :)

[@RahimMastafaPhotography]

Why the fudge did you put music over the video!?

[@rhondarozanek421]

Background music too loud! Couldn’t watch it