Norton Nemesis V8 rebuild - Episode 10

[@billygingerguitars2791]

A million times better than watching England play football

[@alanr2609]

a very welcome antidote indeed

[@soylentgreen326]

🎯❤

[@GTRider69]

"Play" is a bit rich!

[@susanboucher2116]

Yes, he knows what he’s doing.

[@Dave5843-d9m]

Have they blown it yet?

[@timelapsetown]

Opened up the laptop, Alan posted this vid 12 seconds ago. So that was just perfect.

[@michaelcurley7801]

Yes, I'm really pleased with that

[@Plexxarn]

​Standby for hedgehogs in you garden..

[@patreich3637]

34. minutes.

[@thomasmeadows256]

❤

[@Richard-r1x7d]

@@michaelcurley7801you beat me to it

[@clivewilliams3661]

Not only are Allen's builds 'just perfect' but so is his production and camera work that makes it a joy to watch.

[@АлександрГордиенко-щ4д]

Даешь ежикам номинацию на Оскар!))

[@COMA69BAND]

just sat down with a cuppa and a muffin, perfect timing....no annoying music, just the clock ticking and Alan's dulcet tones for company..... absolutely perfect.

[@Deepb1u]

Allen made a mistake but still included it in his video. That level of honesty is a good bench mark for all of us who both teach, and know we can still learn.

[@ninja1150]

Agreed, fair play to him for including that mistake. Hats off to him

[@daniels.2720]

+ we all learn from our hopefully minor mistakes ! Cheers to Allen.

[@manjacovus5342]

My revered English lecturer at uni used to say, We grow by experience, and here is living proof of it.

[@jamesrindley6215]

I was just going to say the same thing. In the age of all kinds of fakes, honesty really stands out. Was just recently watching wristwatch revival rebuild the same watch 3 or 4 times because he'd made a mistake and wouldn't be satisfied until it was perfect. A lesson for us all.

[@PAULWICKS-xy6kt]

and what a mistake.! how could Mr A.Millyard do that.!,? …oh the modesty of the man.

[@anixie]

No CNC machine anywhere close, just a good old fashioned lathe and highly experienced machinists hands, love it

[@WorksopGimp]

Hand files crank cases

[@julianpritchard2558]

@@WorksopGimpcuts crank cases with a hacksaw!!

[@4418CARLOU]

Why would he have any use for a CNC?

[@chriswild2458]

I bet the liners were produced on a c n c lathe

[@gdijkema]

@@chriswild2458 Came to say that

[@slewisedwards]

My wife doesn't know the difference between a spanner and a hammer. She knows motorcycles have two wheels and that's about it. BUT - she asked what I was watching, and has now watched all of these herself at least twice. She loves them.

[@AllenMillyard]

That’s brilliant 🙂

[@kingfishstacy]

Lucky you wish my wife would catch interest in something of mine. 😅

[@kingfishstacy]

Lucky you wish my wife would have some kind of interest in something I'm passionate about. Or maybe not because it would end up I'm doing it all wrong. 😅

[@andystokes8702]

Not knowing the difference between a spanner and a hammer is not that important, every tool eventually gets used as a hammer.

[@mryorkshire3623]

She might be secretly watching it to pick up some cup cake baking tips from Mrs. M.

[@SteveBernard42]

Watching Allen work is a privilege, genius at work.

[@LS-uv9gg]

Hearing an English Craftsman say: "...to my horror, I..." has got to be one of the very best mental pictures of elegantly understated, self deprecating humour on the planet.

[@ianwalton9109]

I was driving home from work the other night, a car had stopped in the middle of the road (country lane) i stopped to see what was up, 2 young lads trying to move a Hedgehog off the road, i picked it up and placed him on the other side of the hedgerow, but hats off to the youngsters for not just running over it, think they are a couple of good-uns

[@AllenMillyard]

That’s really nice of them

[@Honkawsuzyamal]

At one time I had a tiny baby hedgehog in my front garden where a road ran past. I couldn't see the parent or any other hedgehogs around so I put him safely around the back where the whole Street is sealed off.

[@ducatobeing]

Had we mere mortals have attempted this task, the crank being the wrong way round (quickly remedied) would have been the least of the issues. Like any true expert, Alan makes what are actually difficult tasks seem effortlessly simple. The fruits of great skill and experience. Everything about this was a joy to behold. Thank you Alan.

[@henrydorsetcase]

I love the whole "I'll just spin that up in the lathe and give it a tickle up till it fits just perfect"

[@garfield2279]

If he wanted to, Allen could have edited that bit out, and we would have been none the wiser just goes to show even the best of us makes mistakes, credit to him for leaving it in.

[@ChopperCindy]

I have reconditioned, machined and rebuilt engines for a living for 50 years. I am sure I could not possibly watch anyone else doing this work. It is such a departure from the modern TikTok rubbish with captions ,portrait video and music blaring that I find it so refreshing that I could watch it all day. Thank you!

[@richardmoorhouse8030]

The best 22 minutes of the weekend are over….. Are England out yet? Mind you….. who bloody cares when there is a new A.M. film to watch!

[@paramarky]

I'm struggling to think of another man on this planet, who could have done this restoration and rebuild as well as AM.

[@RG-gk4yi]

The only ones that come to mind are the Binky boys and My Mechanics. I think if all 4 of them collaborated on a project my brain would explode

[@henrydorsetcase]

@@RG-gk4yi The issue would be waiting for Binky...... we have been waiting over a year for Ep 39. Just saying.

[@gasdive]

There's probably some guys in or from F1, and some of the old guys who designed the GSX-R, maybe Hiroshi Fujiwara. After all, much of this bike is a pretty straight rip off of his design.

[@stephenscholes4758]

Don't be so ridiculous...why does Allen's fans have to resort to this type of zealotry?

[@grebermuncie3904]

@@stephenscholes4758 Agreed. There are hundreds, if not thousands, of people around the globe with the skills to be doing this same task.

[@keithfarrell3370]

"I just skim this ring on my lathe". Just shows the skill and professionalism Allen possess. Great vid as usual. Thank you

[@generalmassive1907]

I don't know what's more therapeutic, watching alan work his magic or listening to the clock tick in his garrage 😂

[@Malcolm-nj8ky]

Love the clock ticking in the background (no music 👏)

[@aldntn]

Allen is human but readily admits it. Beautifully done.

[@gasdive]

Sign of a master. Just perfect.

[@Birky_41]

Anyone else like the video seconds in without even watching it through? I love these uploads

[@fidelcatsro6948]

of course!

[@fransb8543]

No matter how stressful my day has been, watching Allen meticulously working his magic is as soothing as anything.

[@stevenrowley9481]

Allen, you do realise that you will have to get another project ready for when you have completed the Nemesis! For many of us, we can't go without our weekly 'Millyard' fix! It's the perfect antidote to the stresses ofthe week!

[@jamesrindley6215]

I was just thinking, perhaps Allen will take 2 GSX750 engines and make his own version of the Nemesis, without all the crazy nonsense like needing to take the forks out to change the front tyre of course!

[@allanthacker6072]

From what I’ve heard Allen’s next project is the complete disassembly and reassembly of a top of the range Rolex!

[@davidcatanach2620]

Somewhat encouraging to see even the GOAT makes the odd boo-boo.

[@BaffledApe]

Not only a real old school biker, but a real old school toolmaker and mechanical artisan. Respect!

[@lesleysmith5623]

Allen, that was bloody marvellous. Slip set brought me right back to my apprenticeship about 50 years ago.

[@therealtony]

From one machinst to another: your machining skills are top notch!

[@dbmail545]

I am gobsmacked that your were able to machine those sealing rings without distorting them. Even more surprised that the crank could go in wrong and that you would show it.

[@glennwoods2462]

That's why I watch Mr Millyard... he's that skilled...👍

[@johnchapman3601]

When he opened the box of slip gauges my mind jumped back 55yrs to my time as an engine fitter in Chatham Dockyard 😊

[@jetskifisher7825]

Great attention to detail Alan as ever, from a 50 year engineer using all the machines and hand tools you use, brings back great memories, keep up the astounding work.

[@zawzawaung6789]

I've learned a lot by watching your videos. I usually work on old airhead BMWs, which have their weird quirks. You've taught me to persevere on fiddly bits, and not give up. You've taught me to distrust new-fangled tools, and to go with older tried & true ones. I don't know what your "day job" for MOD entails, but I bet they know they're employing a national treasure.

[@ggmtv1394]

As I watched the measuring and machining of the liners, I was overwhelmed by the calm skill given the tolerances and was beginning to think that Alan had supernatural powers - then the crankshaft went in the wrong way round and showed he's human - human but amazing - endless patience and precise progress. This was an excellent episode, The hedgehogs put on a good show too.

[@4thdimensiontravels855]

It is so awesome that we get to see you in your element. Were all very pleased with that Mr. Millyard. Great job.

[@owensbama1923]

These videos always seem to fly by. As usual I can't wait to see the next one.

[@AllenMillyard]

Ep11 next sat 6pm

[@jessematilda]

Sheer poetry. Calm, precise, accurate. Love it.

[@rdaystrom4540]

Never would've thought about machining the cylinder sleeve gaskets like that. Allen is an amazing machinist, fun to watch, always knows what to do, and documents it on great videos.

[@1t_wasnt_me]

It makes me envious of anyone who grew up around this man, as my memories of older mates guidance tuition consisted more of, "when you're putting it back together, remember that the wee bit there, goes in first, then that other wee bit goes in after it.....and remember to use a wee bit vaseline!!!"

[@SimonDavies-o1p]

Its Allen's attention to detail that never ceases to amaze me.

[@RedJam65]

This is Allen in his version of a study, wotking away with the clock ticking in the background, very relaxing and inspiring to watch.

[@johnmccarthy5132]

Closing in.on it Allen! I can't imagine how appreciative the museum will be to have that Norton run without the prospect of it turning into a grenade!

[@MM_in_Havasu]

Allen, you make this look so easy, and the way you managed to hand-fit the liners without much in the way of measurement is mute testimony to your fabrication skills! An absolute pleasure to watch these episodes on the restoration process of this V8 Norton motorcycle's powerplant. Cheers to you & yours, and do enjoy the rest of your day!

[@doccops]

Oops, easy mistake we've all done similar. Your videos are a delight Allen - thanks for taking the time to do them, and to edit them so well.

[@markspeller5722]

You just know when Allen finishes this, it's Going to be smoother than a cashmere cod piece.

[@randylucas2458]

I love watching you work on motorcycles it is my favorite thing on the internet. I just finished building a 117 cubic inch big bore Harley-Davidson motor with a 4.125" bore and a 4.375" stroke

[@chrisbowman4487]

This man keeps my attention for the full video The man’s a genius every thing Allen does is do to perfection

[@ReinhardPriller-ck9ny]

a perfect example, how brain beats machines. Allan with his know-how and skills is more precise on his lathe then others with cnc machines, costing millions.

[@kcraig51]

One thing I've learned over the years; The importance of wood blocks in a shop can't be underestimated. It's a good thing you caught the crankshaft in wrong. What a surprise it would have been when it took off backwards when you tested it!

[@tim2muntu954]

It's not what Allen does but the way he does it (and video's it). It's positively therapeutic; making the whole world inclined to watch his videos his apprentice is just a side effect. Only a very lucky few ever got to learn from masters like this in the past.

[@SGTDuckButter]

I love watching him work. Charlie Weaver has got to be 60 years old and still works perfectly. My grandpa had one at his farm and I played with it in the 60’s.

[@tonymarkey6525]

I’m glad to see that Mr Millyard is in fact fallible after all! A Great recovery was, of course, the outcome!😊😊

[@wretchedexcess1654]

Showing your humanity tells so much more about your integrity... ...not that there was ever a question about it!

[@douglasanderson153]

Beautiful work Allen. I didn’t know Norton built a V8 motorcycle. That tiny engine is a work of art.

[@pinger201046]

So pleased to see that I'm not the only one who fits things arse about! Thanks Allen, I'm picking up a lot of useful info.

[@michaelwatson6166]

Alan, if you were on the original tream, we would all be riding V8's great work, thank you.

[@fidelcatsro6948]

true..even im inspired to add 4 more cylinder to my 1200 bandit.. but of course we all know its not going to happen

[@Hungry_Hunter]

It truly is one of life's pleasures to watch skilled hands assemble and explain how easy it is to install a crank shaft back to front. Charlie spotted it first I bet.

[@colinbremner9030]

Thank you so much for this series Allen I just love watching pretty much anything you release.

[@charlesphillips8635]

So Mr Millyard you are human after all! Fitting the crank the wrong way round indeed😊

[@richardsprojects]

You were just checking we were paying attention when the crank was in wrong way round .As always , loving the content

[@MrACOUSTICPETE]

Thanks Allen for another of my favourite bedtime stories . Looking forward to the happy ending !!😴

[@joseywales3789]

Definitely got a glimpse of Sir Allen's Swiss Army Knife, Scissors ✂️😁👍... If I'd seen the Barbeque too... I'd be in heaven 😂🤣

[@MrPnew1]

19:10 even Allen can have a minor transgression with incorrect crankshaft orientation. This makes me fell better about all the things that I have done over the years. Fantastic work as usual Allen.

[@gazzafloss]

Beautiful work Allen, your vast experience with machining using ordinary "off hand" machine tools certainly shows. Thanks again.

[@richardraby6266]

So glad that you left the footage in with you installing the crank the wrong way round! This gives comfort to us less talented fellows who FAR more often do similar things. Richard

[@tomtruesdale6901]

Having never seen bore liners installed this was very interesting to me. Thank you for sharing with us.

[@toucheturtle3840]

Allen’s attention to detail is incredible. Always a joy watching his videos.

[@okgo8315]

Absolute genius..... who would've thought some sticky tape would be strong enough to fix the cyl.liners in the lathe??? I call that Rustic Engineering 😂😂.... brilliant..... thankyou Allen yet again✌️🇬🇧

[@steveparkes1]

The engine whisperer! Wonderful to watch, thank's Allen.

[@robinlarge1630]

Not into bikes really, but I could listen to this bloke talk about engineering all day!!!👏🏻🇬🇧👍🏻

[@Pats-Shed]

Thanks for another "Oasis of Calmness" , I'm not sure i could maintain such composure after realising that I had made a mistake as you had with the crankshaft. I would be always anxious when using a brush for the assembly lube, in case a bristle was left behind.

[@JamesesGraves]

You sir are a living legend. Absolutely love how you always have home cooked/baking and wild animals in your videos . Takes a man to admit to his mistakes, hat off to to you sir

[@noelcastle3986]

Allen's commentary is so calming and the expert way he handles all tools shows his natural abilities with these complex machining and fitting tasks.

[@mutters40]

A masterclass in engine rebuilding. Thanks Allen.

[@tonycamplin8607]

Another just perfect video. It's reassuring that even Allan gets it wrong sometimes. Eagerly looking forward to the next episode.

[@gwaithwyr]

I am always pleased when Allen says he was pleased.

[@billdagoe7371]

I love watching these videos by Allen. It's like watching a surgeon but with metal. Fascinating!!

[@kornman]

You not only have admirable engineering skills and a perfect hand. You are also very good with the camera. You show us exactly what we want to see, at the right angle, with the right focus and you choose the right scenes.

[@AllenMillyard]

Thankyou it’s all done on my iPhone 🙂

[@michielderuyter6011]

Like to watch this everytime. Don’t stop please. These are really too short episodes😅. Tnx for making us a part of this. ❤

[@AllenMillyard]

22 mins is manageable for me to shoot, edit and voice over in a week

[@michielderuyter6011]

I understand but it is so calming to watch. Carry on please. Gr. From the Netherlands✌️

[@ninja1150]

Fair play to you Allen, for including the crankshaft installed the wrong way round, odd the gears lining up both ways 😮 Quickly rectified after realising. Now its just perfect. Always a joy to watch and can appreciate your methodical method.

[@BMW7series251]

Thanks Allen for a superb video. Guys, does anyone agree with me that watching Allen work is a bit akin to a surgeon doing his job? Cheers, John.

[@rekleif]

Your videos relax me like no other is able to do. It is probably the clock together with your voice that does it for me. It's also very relaxing watching a master of his craft, like you Allen, and watching in total amazement the perfectionist in action.. God bless and lots of love from Norway. And thanks for the video.

[@CharliePower-mx7tj]

Cannot wait to hear it spring into life again, it will purr 👌😊

[@iceman9678]

I was screaming at the monitor trying to help you reverse the crank. Glad you caught it.

[@nickhellen6303]

I can’t believe it. I’m in shock! Alan made a mistake ( crank in backwards) I love the way it was fixed. No fuss. Not one swear word. Just efficiently done. Unlike how most mortals would react.

[@DavidKing-jx3sg]

Very calming watching these videos, beautiful detail, can't believe it's all done in a garden shed

[@charlottegrieff662]

I can't wait for the next installment. I'm very much enjoying this series.

[@grenvillephillips6998]

A perfect demonstration of Zen and the art of motorcycle mechanics - anxiety about how long something is taking, is one of the recurring and persistent gumption traps.

[@petercowan6936]

Brilliant precision as always Allen. Better than the original build. Can't wait for episode eleven. 👍🥞🥐🍩😄

[@joshuaanothereraseddad]

You, sir, probably have the only set of human eyeballs that could be registered as accurate to .00001 eyecrometers. Another superb video on remanufacturing this machine. Thanks!

[@DW-we3qn]

This engine is going to run just perfect. Can't wait to hear it run.

[@ericwilson2585]

Hey Allen! I gotta say, having patients is awesome. Cheers Charlie!

[@oluffriesthomsen7680]

Amazing, Allen is Actually able to make mistakes, put the crank in the wrong way. That shows he is Human, not Actually super Human. 😙 So soothing to watch his videos, love them. Just perfect. 😉

[@ianmurray3820]

Don’t beat yourself up Allen !! I mean who hasn’t put a Norton V8 crank in the wrong way around.!???😁💪🏻💪🏻💪🏻

[@caseywolters6532]

Absolutely brilliant, Allen-- your attention to detail is beyond belief... I would love to meet you someday, to shake your hand and compliment you in person👏

[@scottwatson8648]

It’s nice to see that even someone as experienced as Allen can make a boneheaded mistake. It’s also nice to see someone of his caliber honest enough to show it. Good on you Sir!

[@splodge57]

I was screaming 'you've put the crankshaft in the wrong way" ... admittedly that was after you'd told us but even so. Another great video, cheers.

[@AllenMillyard]

🙈

[@gonegliding2966]

Another 22 minutes that just evaporated. Just perfect!

[@ianr7023]

This is very addictive and therapeutic. Can't wait for the next episode!

[@paul-thomasjewell2163]

Wonderful - I loved every second! Exciting to see the pistons put back and gearbox attached!

[@ametti000]

Good to see he is human and it's not always "just perfect". Great work can't wait for it to start up.

[@alisonmoxon7519]

We were waiting and up you popped Allen... Amazing .. no football here... Shed/Buried and Motorbike Show whilst waiting . Top job . 👌

[@chipperkeithmgb]

Bloody football

[@Pushyhog]

dont forget lights action camera, camera location, Edit timing, etc., incredible!

[@snowballed4]

Just perfect post-Sunday lunch viewing. I feel at one with the world after each time I watch an episode. What a talented guy you are Allen.