Yea Mittens!!! Doggies are a captive audience when you have food!! Can’t wait to see the down pipe and finished exhaust with Mittens running
@MatlasDI2 жыл бұрын
They are lol, Phoenix has been stepping up a lot as shop doggo lately. Proud of the little guy. Definitely, going to get things thrown on tomorrow and hopefully we'll have a more exciting video to give you guys on Monday 👌👌
@followtheornghat2 жыл бұрын
Eyyy I was in the video 🤣. Getting closer and closer every video. She runs now to finish mittens up.
@MatlasDI2 жыл бұрын
Yuhhh, downpipe came in today so we are a go on getting this thing up and driving now 😁
@christianp31612 жыл бұрын
I enjoy watching these videos while drinking.
@MatlasDI2 жыл бұрын
I appreciate that 😆😉
@walterhagans14652 жыл бұрын
That's awesome Matt, glad you got the win at the end with mittens starting 👍🏾
@MatlasDI2 жыл бұрын
Was a nice win over all the fails 🤣
@ayddinshaw86332 жыл бұрын
Love the videos man keep it up! 👍
@MatlasDI2 жыл бұрын
Thanks man, much appreciated 🙏
@superbike1552 жыл бұрын
Glad she runs. Soon it will be driving!
@MatlasDI2 жыл бұрын
Yessss, hope to drive it tomorrow if all goes well 👌👌👌
@SubieSqwad Жыл бұрын
Just catching up on some videos. MITTENS LIIIVVVEEESS!!!
@MatlasDI Жыл бұрын
Yaaaaas. Almost ready for etuning now 😁
@cughan_94822 жыл бұрын
Woooooooo! Mittens is alive 🔥
@MatlasDI2 жыл бұрын
Yuhhh. I'm excited to get the stuff on this weekend. Just got the proper downpipe 😁
@C4banchee2 жыл бұрын
Just remember to take your time and double check everything nothing sucks more then having to do the same thing 3 or 4 times because you rushed it. Good luck with the rest of it an may your parts show up in time.
@MatlasDI2 жыл бұрын
Thanks man 😁 Have received them as of today, so we're a go for getting this thing wrapped up and on the road. Definitely not fun having to redo things. We'll make sure to do the checks and everything so we don't run into something unexpected, but for the most part we've been able to test and correct any issues as we've gone. 👌👌
@omialmanza19002 жыл бұрын
Oh, boy! I just got one of those unplanned/successful install vibes👍🏼👍🏼
@MatlasDI2 жыл бұрын
Somewhat planned, somewhat successful 🤣🤣
@K-Zoo_Angler2 жыл бұрын
Your Outback slaps so hard man... 🥵🔥 I really want that Generation...
@MatlasDI2 жыл бұрын
Thanks dude 😊🙏 love the 4th gens, and they're ridiculously practical cars 👌
@K-Zoo_Angler2 жыл бұрын
@@MatlasDI Absolutely! I have a 2019 WRX atm...But with a Dog and 3 kids it would be more practical to have a hatch. My fiance has a 2019 Subaru Ascent, so that's the family whip.
@MatlasDI2 жыл бұрын
@@K-Zoo_Angler good combo. Dig the ascents. Super roomie and definitely the most luxury based vehicle subaru has ever offered. 👌
@K-Zoo_Angler2 жыл бұрын
@@MatlasDI 100% agree! Can't wait to see more build progress on your channel! Like to roll up there and see y'all sometime.
@MatlasDI2 жыл бұрын
@@K-Zoo_Angler definitely. Hoping we can start putting on more meets and things in the future 🤙
@liketolearn1412 жыл бұрын
That opening was funny
@MatlasDI2 жыл бұрын
Thanks man 😁
@subiemod6776 Жыл бұрын
Lmaoo🤣🤣🤣🤣 random noises ftw 💀💀💀💀💀 good job bro she runs!!
@MatlasDI Жыл бұрын
It never ends 🤣 thanks bro 🤙
@8145dwerdna2 жыл бұрын
If you have issues with those Bosch sensors they supply switch over to denso. The Bosch they sent with mine started reading wrong within a month. My denso has been spot on few months later still. They come in multiple lengths but p/n 234-5125 is the same length. Price varies where you shop. Amazon was around 105 shipped when I got it now its 77
@MatlasDI2 жыл бұрын
Dope. I've got a replacement sensor, but I've since figured out what was wrong. Came pinned wrong on the gauge side. Original sensor is good for now.
@ChristopherFranz Жыл бұрын
Mittens liiivvveeessss!! Very Exciting. Also, fuck that tree, how dare it drop shit all over Chewie!
@MatlasDI Жыл бұрын
Yeah that tree is an asshole. It's about to lose all its leaves and piss me off. 🤣 I need to fix a couple small things and drive mittens still but we've been busting out a lot of customer cars this week 🥲
@ChristopherFranz Жыл бұрын
@@MatlasDI Just cut it down.... :p
@MatlasDI Жыл бұрын
@@ChristopherFranz eh it really brings the room together. Stump needs to go first. 🤣
@thomasgalvin93852 жыл бұрын
I love the outback. Can't wait for the big boy build. Do the AEM gauges come with sensors?
@MatlasDI2 жыл бұрын
Thanks man. They should all come with sensors but there are a few variants. Look for a 4.9LSU sensor if you were picking one up. They work the best and are most reliable. They do make a version without a gauge as well that is just displayed on the accessport, but I would prefer the backup of having a physical gauge as well 👌👌
@deybi12 жыл бұрын
Yay it started.I started my outback but it smokes like a mofo until I get it tune
@MatlasDI2 жыл бұрын
Ooo very nice, once the exhaust is on we should be able to do preliminary checks and proceed with the initial e-tuning. Just hoping the stock 5eat doesn't eat itself quite yet. Lol
@tommanning73372 жыл бұрын
😁👍🏻👍🏻
@MatlasDI2 жыл бұрын
Alllllmost 👌👌
@shiloh51992 жыл бұрын
Swap in a manual 6 speed and the down pipe will fit. Hope to see more videos soon.
@MatlasDI2 жыл бұрын
🤣 now that's the solution we were lookin for 😄
@coffeeguydave81492 жыл бұрын
Ready to see it purr. Especially with that fuck boy can😂
@MatlasDI2 жыл бұрын
Dude the fuck Boi exhaust sounds great though. That's why I made the exception on the purchase 🤣 making it fit is going to be the interesting part. 👌
@poudrecanyonbiker2 жыл бұрын
Not sure if you've done it yet on the BP, can you do a video (if it's enough content) on top feed fuel conversion? I feel this is a topic I'm struggling to understand. 🤷♂️
@MatlasDI2 жыл бұрын
The tgv video should go into it a bit, but essentially most kits have a seat that reduces the tgv injector seat to that of a top feed, and they give you a rail that is properly spaced for top feed injectors. Have to replace lines at the same time, I can definitely work on a video going over it in a little more detail 👌
@acidmike35352 жыл бұрын
1320 performance has pretty good downpipe been running mine for a year and I have zero issues and the fitment is better then most of the big name brands i paid 400 for mine can't beat it for the price
@MatlasDI2 жыл бұрын
That's good to know. Picked up the cobb already, but will be needing to sell the perrin. Very unplanned expense.
@acidmike35352 жыл бұрын
I feel you I had to wait 3 weeks to put my motor in because I had to wait for a rear main since the first one I got was ripped and I didn't notice until I opened it
@MatlasDI2 жыл бұрын
@@acidmike3535 always setbacks. I think if a project is finished on time it's cursed in some other way. 😂
@acidmike35352 жыл бұрын
@@MatlasDI yeah there never finish or broken even when I get my LGT running I gotta get a new shield thanks to a tracker trailer get my inspection done and go get the air bag recall done
@acidmike35352 жыл бұрын
@@MatlasDI are you planning on doing cylinder 4 cooling mod?
@domziixayya Жыл бұрын
If I knew you were looking for a double vent pod I have 3. I just got all my gauges mounted up and wired
@MatlasDI Жыл бұрын
Daaaang. Yeah still waiting on the block8head one to show up so it's still a mess in there.
@hatefunwrx Жыл бұрын
Mittens will be sweet af
@MatlasDI Жыл бұрын
She's getting there, we're etuning finally new vid out today with updates 🤙
@hatefunwrx Жыл бұрын
@@MatlasDI oh hell yeah definitely have to watch it
@Thechaoscrusadors2 жыл бұрын
Are you gonna do a big wing?
@MatlasDI2 жыл бұрын
Probably something like a liberal or another madrig like the outback has.
@Thechaoscrusadors2 жыл бұрын
@@MatlasDI thatll be awesome!!
@lgt3042 жыл бұрын
Hoe much for the perrin downpipe ?
@MatlasDI2 жыл бұрын
Believe they go for around 680. Would be looking to get around 500 for it. Not sure how much shipping would be. Message me on Instagram or the discord if interested and we could work something out.
@Smeedia2 жыл бұрын
Sounded like a tractor lol
@MatlasDI2 жыл бұрын
Psh you like it, don't lie.
@funkthew0rld Жыл бұрын
sell me the liberal wing?
@MatlasDI Жыл бұрын
The carbon one on the outback is the madrig extended wing. A little different in shape from a liberal, but madrig now makes a carbon style of that as well 👌I'd keep this one to put on the legacy and probably get a liberal style or something to switch onto the outback.