Restore headlights with PRO LEVEL results + We test out Boslla's new 100w super bright LEDs!

With our recent exterior mods, the Legacy GT was beginning to look GOOOOD! But, as you all pointed out in the last video, the headlights being hazy and yellow were really throwing things off. I see this countless times a day, it affects light output which is a safety concern as well as making an otherwise clean car look terrible, so here I am showing you all my favorite way to restore headlights, make them look new and best of all LAST longer than a week without yellowing again.
To really put the finishing touch on things, we also had a chance to test out Boslla's new 100w slim line led replacements, and I was very happy with how they worked out. no cutting of the rear caps, and the light output is seriously bright..
Here is a link to their product I used, and the website where you can check out their other lineups!
www.boslla.com...
---------------------------------------------------------------------------------------------------------------
Products I use/ recommend - Purchases made with links directly assists the channel even if you do not purchase the advertised product!
From this video:
Mini buffing pad kit for drill - amzn.to/425s0Gw
Headlight Polish - amzn.to/3Huvzxl
Headlight Sealer - amzn.to/3HyiVxw
2K Clear for Headlights - amzn.to/3HvlCjm
Assorted sandpaper - amzn.to/3Nv2INt
Sanding Kit for drill (less elbow grease?)- amzn.to/3LrULGa
ALL-IN-ONE KIT (This kit gets pretty good results) - amzn.to/3HASFme
TOPDON Jump Starter - amzn.to/3nm9Il9
TOPDON Battery Charger/ Tester BT - amzn.to/422byH0
From past videos:
Small Oil filter wrench (spring loaded) - amzn.to/3IcLxNU
Mid-range Oil Filter Wrench (spring loaded) - amzn.to/3I3QloR
Hose Pliers 3pc set - amzn.to/3VvO4G5
Gear Wrench swivel socket set - amzn.to/3C7hXWo
Gear Wrench X-Core extension swivel set - amzn.to/3Q2VcZh
Nice Subaru Coolant Funnel - amzn.to/3Em3BTp
Subaru Oil Funnel that screws on - amzn.to/3UtkEsi
AN Wrench - amzn.to/3UIPZI2
Company23 Quick Disconnect Fuel Line Tool - amzn.to/3ClKt77
---------------------------------------------------------------------------------------------------------------
**All Music/SFX Provided by Epidemic Sound

[@shiloh5199]

Good video Matt, really miss your videos and guest appearances on Smeedia.

[@MatlasDI]

Thanks buddy, miss you guys too. Back at subaru selling cars so it's been eating up a lot of time. Hope once the garage is back together I'll have some time for videos again 🙏

[@shiloh5199]

@MatlasDI Your videos are great and you have a really good presence on video.

[@MatlasDI]

@shiloh5199 appreciate you dude 🙏

[@Subject_Proto]

Woooooo! New vid from Mat! I’m definitely going to be getting a set of those LEDs, that cut off is perfect.

[@MatlasDI]

Dude, I was very surprised. I've typically been a morimoto guy, but my 2 stroke 1.0 and 2.0 didnt last longer than a year in the outback and were a pain in the ass. Going to be picking up additional sets for the outback with how these worked out. 👌

[@liketolearn141]

I wish people watched you more. And they could appreciate your knowledge like I do along with the vibes you two put out.

[@MatlasDI]

Appreciate you dude 🙏 no big just got to keep at it 😆

[@subiemod6776]

Big facts!

[@michaelblades917]

Beginning to think you retired from the you tube. So your one of those guys I can’t stand to pass at night. You can see fine and I can’t see anything at all. Ready for next video.

[@MatlasDI]

Haha nah, not retired, just trying to structure things financially in the background a bit. The cutoff is good so I don't think they're too bad on other drivers, but they do make leds that are nearly twice as bright as these that might be a little more painful 😵 Appreciate it man, thank you 🙏

[@darthmikey9180]

You always release a video on a job like the week after I do it😂

[@MatlasDI]

My bad dude 🤣

[@jonnydakota7107]

Made such a huge difference. Looks hella better. NICE JOB MAT 👏

[@MatlasDI]

Thanks bro 🙏

[@omialmanza1900]

Been a minute Matt, good to see a video drop!

[@MatlasDI]

Thanks buddy, yeah been a lot longer than I wanted 😅

[@AzureCrux]

Big ups on the 2k clear. IMO it lasts a LOT longer than a standard sealer, and takes wax/ceramic coating better. Love how the lego progress is turning out

[@MatlasDI]

2k is the way 👌 I shot this video about a month ago 😱 and applied a second coat of the sealant a few days afterward, followed by some ceramic. They still look perfect, but I'll continue to reapply UV sealant every few months to keep them protected.

[@walterhagans1465]

Lots of work to clean those headlights up. Looks great. I used the cerakote ceramic on mine

[@MatlasDI]

Thanks Walter, yeah the cerakote all in one kit works great. Normally what we'll use when they aren't too far gone with nice results 👌

[@jayc5470]

Looks good man! Had to swap my headlights out cause I cant see shit at night even with new LED bulbs. The JDM headlight are worth it. 🤙🤙

[@MatlasDI]

Those blue bezels are preeeeem. Have wanted a set for a while.

[@vannevels6758]

What makes them so worth it?

[@MatlasDI]

@@vannevels6758 it's the jdm hid setup. They're high quality and becoming more and more rare, kind of cool and different, but they do have the cutoff on the wrong side, so require some modification to make proper for US use.

[@foxunfocused]

I'm not a big fan of white light headlights, but that line looks great! Those might not even blind me head-on lol

[@MatlasDI]

Nah youd be good 👍 Issue is normally people putting hids/ leds in reflector headlights, or poorly aligned reflector headlights, which happens way too often 😆

[@mickrichBMXWRXJapan]

I really need to do this to my '05 Hawkeye headlights. Interested to see how these look after a few more months, so please post an update for us. Thanks Mat!

[@MatlasDI]

No problem man, Definitely 👌 as long as you reapply every couple months on the sealant, they should hold up well. The 2k option is a more permanent route that requires less maintenance for longevity. 🤙

[@goodwoodjohnson1692]

Thanks Matt!

[@MatlasDI]

🙏🙏

[@BosllaLighting]

Clean and bright!!!

[@MatlasDI]

Yes! Thanks again for letting me test them out 👌Massive difference from the oem halogen.

[@brandonlee3624]

Big improvement! I just resurfaced mine a month ago, so happy I did. I used the drill attachment for the sanding and buff (really saved my arm!). That rounded dome bit in them middle around the main light was tough though because of the angle where it meets the flush part of the lens. Might need to redo it with the sealant though. The product said it had protectant in it, but I'm thinking a proper topcoat/seal would be good. I kinda hate when the LEDs drive behind me...but I might have to get on that bandwagon...

[@MatlasDI]

Yeah that part was pretty annoying to keep even. I reapplied the sealant a couple of days after, and plan to apply it again every 90 days or so to keep things protected, but may go with the 2k on the next set I do, as it requires a lot less upkeep. 👌

[@daviddin8863]

Cerakote headlight sealer is the best.

[@MatlasDI]

We've used their kit on a few cars with very good results 👍

[@DarkWolfWRX]

Sheesh, you are taking as long as me between videos😅 Glad to see an upload. I should probably do this to my beater daily....but....all funds go to swapping in the STI drivetrain into my VB first 😈

[@MatlasDI]

Yeah, dude, I've been taking my sweet time. Don't really have the space or means to make videos around everything else currently, so I've been back burnering things pretty hard in favor of other stuff. Hopefully, I'll be back to it soon. Might switch more to short format and lives as it would be easier to do more often 😩😂

[@DarkWolfWRX]

@@MatlasDI yeah, between work and being majorly LAZY outside of work, I don't make near as many vids as I could. But I have invested in more cameras and actual mics so I really need to get some use out of them haha. But keep at it, I enjoy watch you and Tanners channels the most. They are much more relatable than most other channels I have come across!

[@MatlasDI]

Feel it. Been trying to work at getting some cash flow going to be able to pursue things, and it's been a little tough. Would like to work more on my cinema/photography side and get a company properly put together. Need to get to work 😤😤

[@DarkWolfWRX]

@@MatlasDI Well I got no doubts you'll pull it off and find the stride that's right for you! Lookin forward to what's commin! 👍

[@brandonlee3624]

Been missing your vids and hope you are well! Hope to see you and some sexy wagons at BIG NW Subaru Meet tomorrow! ✌✌

[@MatlasDI]

Thanks, man. I hope you all had fun at bnw. Wasn't able to make it this year. I started a new job recently, so I am getting finances back on track and then hope to be able to have things set up to keep making content in the future and doing more to the cars. I'll be putting out a little update soon for people on what all is going on, life update, etc. Appreciate you, dude 🙏

[@brandonlee3624]

@@MatlasDI for sure man, I totally get needing to buckle down and get stuff in order! You were missed but I was there repping LGT wagons! Too few of us, but maybe that's what makes them feel so special! Looking forward to whatever content you come out with, just glad you're doing alright. ✌️

[@hatefunwrx]

I would love some for my hawkeye and the fog lights but I'd want a more purple hue

[@MatlasDI]

They looked super blue on the Sony, but they are basically pure white. I'd love the fogs that switch white to yellow, but don't have fogs anymore 😢😂

[@hatefunwrx]

@@MatlasDI for me at least (on my screen) they came across super white with a blue tinge on the edge

[@MatlasDI]

@@hatefunwrx Yeah, the best show of how they look is the last 3 test frames from the 5d, which is properly color balanced prior to shooting.

[@hatefunwrx]

@@MatlasDI very nice

[@jordanbeck640]

You did a great job Matt! However I strongly suggest meguiars sealant seriously

[@MatlasDI]

Thanks man 🙏 I'll have to try theirs out as well 👌

[@jordanbeck640]

@@MatlasDI Sure thing Mat! Thanks for the always informative video, which I just did to my 08' LGT headlights & turned out well, but think I shouldve buffed it twice like you did to get clearer results. Good tip 👍

[@jordanbeck640]

@@MatlasDI Ah I just remembered I was recommended the affordable Meguiars headlight sealant from an old Scotty Kilmer video believe it or not 😅😆

[@MatlasDI]

Ah good old 'Rev up your engines' himself 🤣

[@jordanbeck640]

@@MatlasDI Exactly 🤣🤣🤣

[@cww-tv3267]

I have the 3.0 and they work just like that

[@MatlasDI]

Nice, have wanted to try them out for a while. I liked my 2.0s, but for some reason they failed within a couple of months in both thr headlights and one of the foglights. I'll have to test out the 3.0s in the future 👌

[@vannevels6758]

What did you have to do to make them fit inside the the grey cups? High beams?

[@cww-tv3267]

@@MatlasDI I like how you don’t have to modify the cup tho mine was Already modified for his but idk if you would with these or not

[@cww-tv3267]

@@MatlasDI it would be close

[@Mike_44]

Very nice job! I need to do this to my oxidized '05 OBXT headlights. No way I'm paying $200-$300 in headlights if can be done.. Hey Mat, my ej20x swap is almost ready!

[@MatlasDI]

Aye, let's go 🎉🎉 look forward to seeing it run 👌 100% can do it yourself to whatever results you're looking for, and learning how is nice for other forms of clear plastic as well. I linked a bunch of different products, as well as an all in one kit from cerakote, which we've used and had good results with fairly quickly.

[@Mike_44]

@@MatlasDI Awesome! Will definitely try it. Thanks

[@tommanning7337]

DAM!!!!! NOICE!!!!! 😁👍🏻👍🏻

[@MatlasDI]

Thanks Tom 🤙🤙

[@tommanning7337]

@@MatlasDI 🤙🏻🤙🏻

[@rpdallast5965]

Are you going to make anu more videos? Ive been waiting for you to install a 6 speed in the legacy.

[@MatlasDI]

@rpdallast5965 Hey, I've been weighing things out for a bit now.. I'm on hiatus from videos while I fix up my house and focus on some other aspects of life. Been a tough call, and I will wind up back at it at some point. Just don't know when that will fit into my life at this time, unfortunately 😔

[@85mmonroe]

Are the bulbs holding up well? Thinking of getting some after I refinish my lenses in spring.

[@MatlasDI]

Nah, I was actually going to write an update on that. Bulbs had flickering issues for a bit. Thought it was an issue on my part with the connection, then one bank on the passenger side bulb went out, so it was only illuminating half. Further research on the brand I found it doesn't appear they make their own products. The marking on these are actually from a different company entirely, just rebranded. Further checks and research.... Chinese rebrand. Do not recommend. They were very bright, that's about all I'll say about them. Stick to a good hid kit, or leds like morimoto/ diode dynamics. I will also add I did not try to contact them for warranty, so I can't fully state if it would have been taken care of by them or not. This was a product test/ review with products provided at no cost by them. I just didn't want to mess with it and switched back to companies I've used in the past after finding out the products I was sent aren't actually manufactured by them. 🤙

[@WraithlingRavenchild]

Plus side of being ambidextrous, when I did my headlights I could swap working arm =)

[@MatlasDI]

A couple more headlights and I'll be ambidextrous as well 🤣

[@RobertSavello]

Please do a follow up video towards the middle of fall and let us know how this has held up. Or if not the fall then in 1 year.

[@MatlasDI]

Definitely. Has been a month now since filming and no issues. I do always recommend if not using 2k clear to apply the sealant a couple times within the first week, allow full cure (24-48hrs) before washing, and then reapply every 90 days for continued results and UV protection.

[@RobertSavello]

​@@MatlasDIHey man. Been a while since you've put out a video. Hope all is well. It's coming up on a year and I'm curious how the headlights have held up. Nobody ever does follow up videos on headlight restoration stuff and as a satin white legacy wagon owner myself, I'm invested in your project. Miss your videos man.

[@MatlasDI]

@RobertSavello still doing well, I should have continued sealing them to get the best results, so there's a little yellowing coming back due to lack if uv protection. Just haven't had time or space to mess with the cars at all. I'd personally recommend to do a 2k clear over sealant, but plan was to switch to a clear corner style like the outback.

[@vannevels6758]

So what are you going to do for the high beams? Oh, this method or all in 1 kit and why?

[@MatlasDI]

Either another led set from them, potentially the ones that do yellow or white, or just leave them. I don't really use high beams often where I'm at.

[@vannevels6758]

@@MatlasDI ok cool. This method or the all in 1 kit?

[@MatlasDI]

@Van Nevels I'd say personal preference. If you want them perfect, take your time and do this, if you're trying to save time and money and just clean em up a good amount the cerakote all in one isn't a bad kit. That's what we normally use to improve all the cars we pick up over on smeedia.

[@TheRisenOne777]

You should use cerakote headlight restoration on your headlights going forward! Its leagues clearer than these turned out

[@MatlasDI]

I believe that's just the camera doing it injustice, because we've used both methods on probably over 20 different headlights at this point. The sealant made it look abnormal before it was completely cured in camera. However, from having used the cerakote lens restore kit as well, it is a hell of a kit. 👌

[@The21stChronicle]

Can't wait to see what you do next. I'm working on my own 05 outback xt and your content has been a source of inspiration. I've always loved this car and i never really comment on this account, but it's exciting for me just getting into it all the things there are to learn. I appreciate your efforts for this journey you've taken us on, and hope you're taking all the time you need to make sure you create the best possible content without making many compromises. Here and waiting for the 05 wagon gang, and cheers to the future, whatever it may hold ✌️🤙

[@markjohnson3737]

We need more Matt and Tanner content!

[@MatlasDI]

Agreed. Would be fun to shoot more. Been a rough spot for me currently, but would like to get back to it. 👌

[@SUAVE541]

Okay man i was being nice but where the heck is our content? Lol

[@MatlasDI]

Sad to admit, but I ran out of money.. Went back to a normal job to get my finances back in check. I'm still around, but my job takes up 90% of my time currently. When I have money to keep things going, I'll get back to it.

[@SUAVE541]

@@MatlasDI well i hope the best for you man god bless you and your household abundantly 💯🙏🏽

[@MatlasDI]

@SUAVE541 thanks man, much appreciated 🤙 hope to have much cooler stuff going on this next time around.