NRG COMPLETE INSTALL GUIDE FOR QUICK RELEASE STEERING WHEEL. 92-97 Ford f-150, Broncos, Mustangs

[@kellypaul5424]

Great info that I’ll definitely use, interested in taking it one step further and using the cruise control still!

[@gotrain4me]

I was just wanting to see a video like this.

[@JJBanuelos]

Hope it has all the info you need.

[@gotrain4me]

@@JJBanuelos For sure. Keep up the detailed work on all the upgrade videos on this make and model. All the way down to listing the products in descriptions, good job man. Question: Any regrets not going with a "deep dish' wheel?

[@JJBanuelos]

@@gotrain4me thanks. No regrets I like the look of these wheels kinda gives it a sporty but aggressive look at the same time.

[@gotrain4me]

@@JJBanuelos Would you say the new steering wheel is smaller in circumference then OEM?

[@JJBanuelos]

@@gotrain4me yes by a lot. The OE one is I believe 15 3/4” & the new one is 14”

[@smithsbell]

Just bought the stuff off of Amazon for my diesel cummins swapped Ford. Thx!

[@smithsbell]

Ps. Nice name too! 😊

[@JJBanuelos]

Awesome, let me know how it turns out for you. Wait Cummins swapped? That’s something sounds awesome

[@gregdevenney1941]

Great video. I ordered this kit for my Bronco. Then I found your video. I’m sure I’ll be watching it a few more times.

[@JJBanuelos]

Awesome you’ll love it

[@vegaf2011]

This was so freaking informative 🙌🏻 good video definitely answers everything. I do have one question though how do you find the right hub and quick release for a certain model of vehicle?

[@benjaminwhite5593]

Just check their website. You can find exactly which one you need.

[@vegaf2011]

@@benjaminwhite5593 thanks already installed mine. Plug n play 🤟🏻🤟🏻🤟🏻 I got lucky af.

[@The1andonlyTMKGaming]

I wish they gave install guides in the boxes for nrg parts

[@racine1049]

Like your attitude bro, no bullshit just a good thoroughly explained video.

[@JJBanuelos]

Appreciate it that! 👊🏼

[@Mondo888]

Love the setup. Do you know which wires are for the cruise control? I’d like to keep the cruise control and put them on the dash.

[@JJBanuelos]

Thanks, I’ll check & find out for you.

[@coreylaughy1066]

@@JJBanuelos hey brother you find out how to keep your cruise control? Got a 1997 f350 with the NRG wheel and an empty cruise control harness. Any information is appreciated!

[@Pludplug]

@@JJBanuelos I'm interested as well

[@filiptrojanek5083]

Excellent video. Could you please post the part number of the hub adapter? The link you have no longer works.

[@LegoRx7]

Where did you get the ground contact plate? I just got my SRK-161 from your vid. Thanks!

[@transporter13956]

Great work on the video! Keep ’em coming

[@JJBanuelos]

Will definitely will. 👊🏼

[@Pludplug]

@TRAILBLAZER MVP right here. Really interesting in info on the cruise control wires to retain them. Thank you!

[@JJBanuelos]

Cruise control would be tough to keep it would have to mounted onto the dash panel for it to be retained

[@TheModAddict]

That lightening is Beautiful

[@JJBanuelos]

Appreciate it!

[@BVDsGoneFishing]

Those dang heavy airbags! Can't argue it looks better though! Great video.

[@JJBanuelos]

Appreciate that, looks & feels so much better. Thanks for watching

[@jesusmendoza-tw4nw]

Great info where do you get the plate for the horn thanks in advance.

[@JJBanuelos]

The plate is part of the kit when you order it.

[@fourwheelpeelful]

I got lucky and stumbled across this. I was planning on doing this to my bronco. Thanks for the links you saved me some cash compared to what I was going to have to pay through a different site

[@JJBanuelos]

Let me guess you were looking at Desolate Motorsports?

[@fourwheelpeelful]

@@JJBanuelos yes sir. That’s exactly who I was looking at. You saved me almost 200 bucks

[@JJBanuelos]

@@fourwheelpeelful cool glad this helped & saved you some cash!

[@seanneubauer9818]

Thank you for this vid bro! Worked perfect in my OBS

[@JJBanuelos]

Great to hear man! Glad this helped you out. How do you like it?

[@STR8SICCC]

Another awesome video! What's the MSD button on the left side of the steering column for?

[@williammendez5026]

Great video bro. Very descriptive and interesting. Thank you.

[@JJBanuelos]

Appreciate it that bro! Glad it was helpful

[@cesardelgado8460]

He'll yea I was just wondering how to change my old steering wheel as soon as I was done watching ur video I went and ordered me a set lol will get them April 2nd thanks man 😎💪🏼😈

[@JJBanuelos]

That’s awesome! Your going to really like it. Makes a huge difference in feel & looks.

[@cesardelgado8460]

@@JJBanuelos i already like how it's looks by looking at your pictures just gotta get it on my hands now lol....so wats next on interior mods 😂😂😂

[@survivalofthefittest351]

Where can I get that ground ring that you mounted on your multi function switch

[@mancar97]

Where can I get my door panels redone, I'm in San Antonio and mine are in bad shape maybe your guy can do mine if I can ship them

[@JJBanuelos]

I’ll let him know see what he says

[@EduardoSanchez-vd1zi]

Good afternoon, well your video, can I do this installation on a 2002 Ford F250? Do you think Gen 4.0 With Carbon Fiber Handle - SRK-700BK-CF is a good option? What do you recommend?

[@jujurock64]

Awesome … but what did u do with the cruise control switches on the steering wheel? Def a fiction I don’t want to loose.

[@JJBanuelos]

I just deleted this feature as I don’t do much highway cruises. You could always add them to the dash panel some how if you really needed it. To me it wasn’t worth it

[@kawaiiplayz8045]

Great video easy to follow along

[@AlexanderGonzalez-te6bj]

Where you buy the steering wheels kit if you can send me the link thanks you

[@christophermunoz205]

Is it the same on 98 02 towncar

[@JJBanuelos]

That I’m not sure on.

[@gottagrind2shine607]

You took all of the guess work out of my install, thank you

[@JJBanuelos]

Cool glad this was helpful! 👊🏼 let me know how yours turns out

[@gottagrind2shine607]

@@JJBanuelos I finished the install on my 07 crown Victoria yesterday. Huge difference in steering with such a smaller tighter wheel

[@spcromanlopez]

That wheel looks awesome.

[@cliftonhigginbotham2865]

Does NRG sell a kit for a 1998 Ford F150?

[@KnightDrives]

Could we sauter the wire to tje golden backplate? Would that work too?

[@mustangtom-e4541]

That metal tab comes with the hub?

[@shamrockfitness6509]

Awesome video, thank you for this. Only thing I have noticed is that when turning, I can hear the tab rubbing the ring inside of the hub, anyway to solve this?

[@JJBanuelos]

Only way is to push tab back further away from ring till it basically just touches it. It takes a little playing with it to get it right but ultimately it’ll still have a sound in order for the horn to work.

[@shamrockfitness6509]

Awesome, I will do some adjusting on it. Definitely an amazing upgrade

[@allentraylor5659]

Hey bro , I have a 95' mustang . I want this set-up , but I don't want THE wheel to be closer... Are you saying that even if I add the quick-disconnect with this kit . It STILL WONT BE CLOSER THAN THE "ORIGINAL" FACTORY WHEEL ??

[@EastCoast_SGS]

Still have that old steering wheel laying around?? Looking to upgrade the one in my f250.

[@oscarcobian6910]

FYI DONT FORGET TO USE BLUE LOCK TITE we do a lot of Desert stuff and they have come loose before

[@JJBanuelos]

Thanks for the tip.

[@luismandujano7735]

Sick ! Where did you buy the shirt ?

[@JJBanuelos]

I’ll have to look it up I don’t remember. Thanks for watching

[@greenreaper8663]

Great and very informative video! I want to do this to my 95 Eddie Bauer Bronco. Was there links I missed? I didn’t see them in the video.

[@JJBanuelos]

Thanks. Yes there is links below the description in the video. Let me know if you have any more questions

[@greenreaper8663]

Aha found them, not the smartest You Tuber out there…lol. This is one of the most informative videos I have ever seen. Very nice truck also, great work!

[@JJBanuelos]

@@greenreaper8663 appreciate it! 👊🏼

[@samschroeder25]

Great video. Is there anyway to install this and still keep a functioning cruise control?

[@JJBanuelos]

Don’t think so. Just able to keep the horn.

[@chelosauthentic]

Good video bro.

[@chrisurfer83]

That was super helpful thanks!

[@kylegibson9288]

Would it be possible to relocate the cruise control buttons to somewhere on the dash?

[@JJBanuelos]

Not sure but anything is possible. I haven’t looked into it.

[@billbond2045]

Did the air bag resistor come in kit ? Or did you have to request that?

[@JJBanuelos]

I want to say it did, you can also buy them separately from Amazon they come in a kit & are usually pretty cheap

[@TheyCallMeButtercup]

help, I did everything you did, but my horn wont work off the blue wire which I'll deal with later. My biggest concern is the air bag bypass is not working. my light still flashes. any suggestions. please

[@JJBanuelos]

Make sure your getting a good connection on the connector with the resistor plugged in. Also make sure you have the right resistor amount to little will not turn the light of it’ll act like a disconnected connection still.

[@adamskoruppa4743]

What are the part numbers for that kit I have the same truck

[@Chemogs]

What about cruise control buttons? Did you relocated those or what?

[@JJBanuelos]

I left mine off, I don’t plan on going on road trips with it

[@jesusmendoza-tw4nw]

Thanks for the info really good video .

[@JJBanuelos]

Appreciate it, I tried to make it as clear & informative as possible for you guys.

[@jcburwell112]

Great video.

[@filibertohurtado7674]

Does the power ring you cut in half come with hub or the quick disconnect?

[@JJBanuelos]

Don’t remember I want to say with the quick release

[@filibertohurtado7674]

@@JJBanuelos thanks for the reply and its come with the quick cause i just received the hub and i didn't come with it. By the way love the truck

[@laurencemason1513]

What is the name of the ring you used to ground the horn and where did you get it?

[@jamesblake7513]

Did you ever find the info you needed? I'm curious, too.

[@24Keeper]

Aloha, wondering if I Can use a SRK-160 hub instead of the 161?? Is there really a difference between the two? I have a 97 F-150

[@JJBanuelos]

Not to sure bout the difference in the hubs bro, you could always send it back if it doesn’t work. Why do you want the 160 hub?

[@24Keeper]

@@JJBanuelos it says 97 f150 to use 161-162 hub. I got the 160 though. Wondering if it would work if not I’ll send it back. Anyways I already ordered the correct hub for my truck. I didn’t even try using the one I have.

[@drippingtoohard2868]

what ended up working for u ? I have a f150 2003

[@lilboss82]

Does the horn work reliably? That metal ring seems kind of wonky. I done understand how that’s going to hold up over time

[@JJBanuelos]

I know it kind of looks cheap & like it’ll wear over time & loose contact but it won’t. Still working great.

[@fangrc3404]

Awesome vid bro, just what I needed.👍🏻✌🏻

[@JJBanuelos]

Thanks! What you putting a wheel on?

[@fangrc3404]

Yes, but I wasn't sure about the horn hookup. Got it! Thank u.

[@xxtheycallmeeli]

I change my OBS 250 to your original one now my Overdrive is off and flashing

[@davidrivera5184]

You didn't go over some wire that you removed right from where the key goes into the ignition. You just edited right passed it. Ever since I removed it, just like you magically did in the video, my truck won't start. It'll turn over but won't start. Do I need to put it back in, and where does it need to hook up too after that?

[@davidrivera5184]

I also noticed you didn't start the truck after the wheel was installed. So did you have issues with that? Did you have to reconnect the wire? Please let me know cause my truck is a brick. I'll see what I can find online but so far nothing.

[@JJBanuelos]

Sorry bout that yeah I didn’t have any footage of me removing that wire that went to the lock cylinder I do know what your talking about. Honestly I think it was for the chime, once I removed mine that’s all really what stopped. I didn’t have any issues with it not starting at all

[@martinmontes4819]

What steering wheel did u used like the pattern size

[@3rdcoastobs467]

Hey off subject of steering wheels, do you recommend a paint and body shop around here? The guy I was dealing with son took over the business and he just wants to do insurance fender benders, play frisbee golf and smoke weed now so it kind of screwed me since he bailed on my lightning. I Found a guy in Texas City that’s seems good but that paint job you got is clean.

[@JJBanuelos]

That sucks man. The guy I used also also worked out of Texas city but has then moved. Last time I talked to him he was trying to start his own little business. I’ll reach out to him & see if he’s back up & running & I’ll give you his info.

[@3rdcoastobs467]

@@JJBanuelos sounds good, I appreciate it

[@northwestmechanic8991]

I just did this on my 2003 Honda Odyssey EX-L.

[@JJBanuelos]

Nice how did it come out?

[@northwestmechanic8991]

@@JJBanuelos turned out awesome. It definitely feels better.

[@JJBanuelos]

@@northwestmechanic8991 that’s awesome

[@brettley____196]

Anyone know if you HAVE to use the nrg hub with the nrg quick release?

[@cesardelgado8460]

So I got my steering wheel and let me tell you it will NOT fit with out the quick release hub the back of the horn will hit on the bolt that holds the short hub it's not deep enough I ask if I could change it for one that will fit and was told that's how they are made so I would have to buy the quick releas 🤷🏻‍♂️🤷🏻‍♂️🤷🏻‍♂️

[@travisw6881]

Hmm my nrg short hub didn’t come with a gold ring?

[@kraigy28]

Do they have a way to keep cruise control

[@JJBanuelos]

Unfortunately no unless you make something custom

[@TheHollyshit123]

Great vid ty

[@JJBanuelos]

🤘🏼

[@jamesblake7513]

How much for all in the kit?

[@redeyetimmy1031]

Obvious question. Should you unplug the battery before starting?

[@JJBanuelos]

Most definitely, always take extra precautions with dealing with the airbag system on any vehicle

[@a.albertoosuna4917]

What is the main steering wheel bolt spec to tighten back up? Great video, thanks for all the information.

[@rasputin7277]

Approx 3 ugga-duggas

[@jacobn516]

Did you lose ur Cruse control with the new wheel

[@JJBanuelos]

Sure did but I never really used it so it wasn’t a big deal for me

[@leechao9185]

My Nrg hub did not come with the horn contact switch, where can I order one anyone know?

[@jonathonmanigault7698]

Nice I just bought a 96 bronco and the first thing I want is that ugly Sterling wheel off? Lol 😂

[@Wickedtrucker75]

What about a 98 Ford Expedition with cruise control?

[@JJBanuelos]

Would work but would eliminate the cruise control.

[@elideedrick5116]

Will this same steering wheel work for an 03f150?

[@JJBanuelos]

Steering wheel would work but the hub maybe different I’m sure they sell hubs for that model.

[@elideedrick5116]

@@JJBanuelos do you know where I can find it

[@Donnythelatemodeltech]

Looks like I'm getting a wheel now. 🤑

[@JJBanuelos]

🤘🏼

[@hrbc64mustang]

Will the hub work grant steering wheels?

[@JJBanuelos]

I’m sure it as long as it has the same number of bolt holes.

[@cameronpeterson9812]

Will this work for a 93 ranger?

[@JJBanuelos]

You know I’m not sure. If it has the same steering wheel like in video then yes.

[@3rdcoastobs467]

What ya gonna do with the old steering wheel?

[@JJBanuelos]

Plan on keeping it just in case I decide to go back but I doubt it haha

[@3rdcoastobs467]

@@JJBanuelos 😂 I hear ya...I’m keeping my old stuff as well, just had to ask...never know when you want it back on the truck again.

[@pelon2809]

In case you don’t go back to your old steering wheel I’ll buy it from ya!

[@vapinyoshit2735]

Would all this work on a 93 ford explorer?

[@JJBanuelos]

Definitely should be the same setup

[@7DLeathery]

I wonder what a steering wheel puller is..

[@JJBanuelos]

You could use one or you could also hit it with your purse 👜

[@7DLeathery]

My purse isnt heavy enough can I have you sisters?

[@7DLeathery]

I'm just hearing my grandpa's voice Sayin some snarky shiat.. I'm sorry man, I'm sure you've had your own grandpa or someone do the same.. enough indians telling you what to do, and not enough Chiefs

[@JJBanuelos]

@@7DLeathery 🤣

[@JJBanuelos]

@@7DLeathery it’s cool bro, there’s no right way to do things on KZbin anymore, even 1+1= 2 isn’t right. As long as you get the job done & the outcome is great & productive that’s all that matters. Appreciate you watching & your feedback.

[@tr3wats453]

Thanks 🙏

[@JJBanuelos]

No problem hope this helped.

[@jhrsmail]

Nevermind.. found it!

[@CisnerosMotorSport]

Does it work for a 04-08 f150

[@JJBanuelos]

Not this hub but I’m sure they have some that may fit your steering column

[@Dinghyman70]

would this work for a 1990?

[@JJBanuelos]

Yeah man should be the same

[@jswizzlenizzle9538]

i have a 1990 too did this kit fit?

[@mauryg6047]

Nice

[@pete-mz9vr]

D.O.T., approved??

[@JJBanuelos]

Doubt it since your removing a airbag from the vehicle

[@pete-mz9vr]

Federal law, against removing air bags

[@TheRoadhammer379]

@@JJBanuelos I linked the national highway transportation link regarding private ownership of a vehicle and the removal of the airbag

[@vegaf2011]

Wait what's alcatera wrap?

[@choppa8059]

Im 3 yrs late but its just a type of material kinda like suede

[@vegaf2011]

@@choppa8059 holy shit can’t believe this was 3 years ago. Thanks for update appreciate it

[@hughterry9636]

What about a ford f150 1998

[@JJBanuelos]

Should be the same they have the same setup.

[@TheFARM2019]

Sell me your old steering wheel and air bag?

[@JJBanuelos]

Sorry plan on keeping it.

[@TheFARM2019]

@@JJBanuelos oh alright... mines all taken apart and damaged (and thats before i got to it) i might just find something similar to this kit you installed... maybe do a wood grain wheel and change out some of my interior trim to wood grain as well 🤷🏽‍♂️ well see

[@TheFARM2019]

Well i gutted my interior this morning and found my air bag! Now i just need to replace the clock spring and cruise control switches, clean it all up while im at it and probably just put a new steering wheel cover on it to protect the wheel and myself

[@jorgestrohmeier6190]

Check out this steering wheel kzbin.info/www/bejne/oZqpk51mh72hbdU

[@jacobn516]

I have a 1995 f250 7.3 without a hair bag, will this still work for me?

[@JJBanuelos]

Yeah this should still work. They use the same columns

[@Treedogg7861]

Would this work on an 01 f150 xlt?

[@JJBanuelos]

The hub may be different for that year

[@timallred6789]

Do you think the universal one would work for a 04?

[@JJBanuelos]

The hub might I don’t see them changing the steering shaft much on these. It’s worth a try if not Amazon will definitely let you return it within so many days.

[@timallred6789]

@@JJBanuelos one more question how far did it change the length it looks like a fair bit but looks can be deceiving

[@JJBanuelos]

@@timallred6789 it actually free up some room maybe about 2/3”

[@timallred6789]

@@JJBanuelos alright then im not really a bigger dude but always hit my legs on the steering wheel getting out and that gets old after while😂😂

[@LegoRx7]

Hey, currently looking at this for my '02 F-150. Did this ('92 - '97) work for you? Thanks!

[@abelmedrano1993]

What about a 1997 f250

[@JJBanuelos]

Should be the same if the dash & steering wheel are similar.

[@TheRoadhammer379]

Yes for goodness sake. ANY F series from 92-97. Holy shit, I swear it's 2023 and no one knows how to do research for themselves.