Nv Nova Jet, Lustre & Boost Review + What's the Difference Between Them?

‪@CarCraftAutoDetailing‬ 👍Please Like the Video 🔔 Subscribe 😀Enjoy
If you’d like to support this channel and future content please consider buying me a coffee at:
☕️ www.buymeacoffee.com/CCAD
The promotion code has ended, thanks to everyone who supported the channel through it!
Visit the CCAD Amazon Storefront for my top detailing products:
www.amazon.com/shop/carcrafta...
Products reviewed in video:
Nv Nova Jet: www.waxit.com.au/products/nv-...
Nv Nova Lustre: www.waxit.com.au/products/nv-...
Nv Nova Boost: www.waxit.com.au/products/nv-...
Nv Nova Boost V2: www.waxit.com.au/products/nv-...
ℹ️ Some listed products in the description box contain Amazon and other affiliate links. By clicking these links I’ll receive a small commission on purchases made without any additional cost to you. If you purchase through my affiliate links it greatly helps support this channel and future content so thank you in advance❣️
Music tracks in order:
Orange Foot by Dan Henig
Wrong by Dan Henig
Lust For Love by White Hex
For R & S by Density & Time
#nvcarcare #nvnova #carcraftautodetailing

[@Biscuitabuse]

*has 3 layers of Jet on car* "How do you dry your car?" "I hose it down" Drops Mic.

[@adhithyasodhi3203]

Lustre is my favourite coating & leaves the slickest surface I've ever felt. Quite addictive and would be my go to - if I was rich :)

[@WarwickJaensch]

Awesome video! Love the discount codes, thank you!!

[@matt7996]

Love all these in combo with each other!! Great vid bro 👌🏼

[@jimmason9488]

Love using Lustre The shine is incredible Brake dust washes off Car looks like it’s ceramic coated Very hydrophobic

[@HeliconPath]

Very happy to see this ;)

[@neilbenzie3618]

Awesome video and truly awesome products 👍🏻👍🏻👍🏻😁😁😁😁.And thank you for the discount code 👍🏻

[@TG-cx5bn]

Great work Sandro. Fantastic idea for the coupon, would like to see more of these.

[@safekraka]

Awesome video mate. I found out about Jet through Pan the other day and from that found my way here. Love your methodical approach and great way of explaining the process to a weekend washer like me. Subscribed.

[@jtschump]

Thanks again Sandro - Love the Concour/Nv product line. Been using Boost over EVO and it's AMAZING!!

[@autoprofinish3453]

Great video and feedback, just what I was after thanks Sandro

[@korpharm]

Thanks Sandro for the video. I was a bit confused but wanting to try them so thanks for clarifying. I just got all three and used the discount code which was awesome. I love the "evidence based" nature of your videos too. Side by side comparison and an objective approach is what I love to see rather than just opinion or company press release. Cheers.

[@frankfedele483]

man i love your videos. Appreciate the time you take to do the hard work for us

[@markradovic4493]

Congrats Sandro, yet again another great comparison video. I personally use Boost over a dry application of Meguairs HCW and find they work together very well. I like the idea of the discount coupon and that you acknowledge NV as Australian Produced. Keep up the great work, love the channel and have learnt so much from your content.

[@4agePower]

Fav combo! Its effortless. CCAD needs some merchandise - happy to support! #1

[@larrysing]

I love these products! Thx for the info!

[@JacksonStrain]

Have been meaning to buy some boost and try it out on mine and my partners cars that I have coated in UK 3.0. So with the discount code looks like I'll finally place an order thanks Sandro and waxit 🙏

[@RedlioNxTR]

The ending is literally awesome

[@kerrymillikin7242]

Exactly what I was looking for, Professor. Well played.

[@CyberMikes]

Great review and tutorial. Ordered mine. Glad they are now in the US as well.

[@hudsonatlantis6754]

Fantastic Video 👍

[@seyoungkim4694]

You're a legend Sandro!

[@seyoungkim4694]

Lol. Boom. Ordering 1l of nova jet rite now.

[@youcanthide004]

Another outstanding video, thank you.

[@sunmode3205]

Nice review Sandro 👍

[@MLife1972]

Thanks so much for putting this video together. Their own website isn't very clear on what the difference is and the retailers seem to repeat what's on the official website.

[@charlatanshost18]

Really great review.

[@alvslvfdo]

Thanks a lot, Sandro!

[@Bobby-wo4ub]

Thank you for this great content!

[@thetraindriver01]

Great vid Sandro mate, hope you had a good Christmas 👍😜

[@7071t6]

Thanks Sandro, your the best, please keep it up, as i have said i will be buying the nova jet luster as soon as i run out of the meguiers spray hybrid spray on SIO2 Ceramic wax. :).Also i will be recommending to my friends as well, what to use and where to by, when it comes to various issues with there cars, all based on your uploads, as your the best as far as i am concerned in relation to basic car detailing ie: the average car owner DYI, also those in the business of cleaning cars for a living as well. :) So basically your channels is the best of both worlds. :)

[@gregmannos]

I probably won't be buying any of these products I appreciate the video none the less. You break down the info extremely well..

[@alecsantos6399]

Thanks For this Sandro! Excellent explanation of all 3 products!

[@CyberMikes]

I Nova Jet Coat my Tesla Model Y today.. Wow!! Third day of ownership but what a simple system and application. I'll be applying a second coat tomorrow and lustre later.

[@patrick11736]

Well done

[@richardhoang6115]

I got all 3 and I'll buy more where is this description box thing? *Found nevermind forgot about the arrowhead facing down lol* Even easier someone post the code! Cheers Sandro! Huge fan of Nv thanks to you! I'll try out their glass coating too!

[@BrianW1612]

Hopefully these become available in the UK at some point as they look like really impressive products.

[@christopherweir9419]

Awesome review as usual Sandro. And as usual you make me spend more money 🙄. Seriously though, Jet I feel is becoming my go to topper for all the reasons you stated. The only downside when you compare it to other products here in Australia, is cost.

[@sbrick9589]

I have and use all 3 and love all 3

[@hanginwithsing1118]

Ur videos are amazing.

[@jonoklease5562]

Awesome Video Sandro once again, my go to brand and products, anything in the works for NV as far as new coatings? Cheers I also find personally I can apply lustre to the hole car then buff off, still super easy to buff off and it might be in my head but I find it bonds better from doing this technique.

[@chadrandolph9874]

Hey Sandro! Nicely done! NV is definitely on the rise....and if they ever get a distributor in the US, they will set a new bar! P.S.....Have you heard of ‘GlossBaus’? They are a company/manufacturer out of Canada that makes this coating.(GlossBaus) I would love for you to do a detailed video on ‘GlossBaus’...they seem reputable and the product seems to be good....from afar that is! Cheers mate 👍🏾

[@kennethmack2410]

I have coated a black roof with Cquartz lite and then Reload. Have used BOOST as a topper but have found that once the car gets hot or out in the sun it seems to fog up. It can be wiped off but will reoccur again. A non BOOST area shows no sign of fogging. Wonder if anyone else has experienced this. Love your videos, great for the layman and I suspect experienced detailers.

[@pheenix1976]

Wow. Didn't realise NV was Aussie. Will give em a go at some stage. Jet looks impressive.

[@Bobby-wo4ub]

Thanks! for all of your support!

[@CarCraftAutoDetailing]

Appreciate it mate, my pleasure and thank you!

[@davidduignan7924]

Great video, I have been waxing my vehicle and then topping with P&S Beadmaker, the vehicle is undercover at home and work and I find it lasts 4 months. I brought Jet and Lustre, will stick with wax first and layer Lustre, Jet and maybe use P&S Beadmaker as a topper.

God damn it Sandro. Just popped in for a little know how and I've ordered Lustre and Boost and I don't even have a car!!!!! My wife is gonna kill me.

[@tonymontana897]

There's nothing like bead porn ! Thanks Sandro for this excellent report. Your hard work making these videos is truly appreciated. I have recently just received my order for both Jet and Lustre and am waiting for Boost to arrive. I will be using these on my Concourse Black E36 M3 which has already had the paint corrected. It looks amazing now, but can't wait to see it after the NV application !

[@mahmoodalkahalifa206]

Great video as always . i have a question for you , Have you tried polish angle primer spritz and cosmic spritz ?

[@CarCraftAutoDetailing]

Thanks but no, I used to Invincible Primer followed by Comic Glasscoat V2, but have not tried Primer Spritz followed by Cosmic Spritz.

[@Ozzcaddy]

Thanks Sandro for a detail explanation on the difference between these 3 NV products. I had just ordered the NV Jet & Lustre from Waxit Car Care, as I had already purchased from them following your video on Boost, a maintenance kit which included Boost and Snow. Thanks for arranging the discount on these products, it is much appreciated. Cheers.

[@bluecent]

How’d you go with Jet over Lustre ?

[@Ozzcaddy]

@@bluecent As it has been a year ago, from memory I had preferred the Lustre over Jet. I used these as a topper for the Opti-Coat Pro+ coating that I have on the car, which is now just over 2 years since having it installed. I now use Turtle Wax Seal N Shine (Improved Formula) as the topper. The car is parked 24/7 outside, and Seal N Shine just keeps the car much cleaner and continue gloss and last longer than the other products I have used for a topper, including Opti-Coat Hyper Seal. I have neighbour's who comment on how clean the car is, even though I know it is dirty and requires a wash.

[@4syth]

I used Jet over Lutre for the first time today.... wow, very happy with the result. What would be the best car wash to use to gently clean and not noticeably diminish Jet, I plan to use Boost after every wash.

[@MrGodSinx]

I would mix those two Lustre and jet 🔥

[@acigarsmoker]

Hi Sandro, What would you use to enhance a silver car, Lustre, Jet or stack them? Thank you for all the great videos and knowledge you share.

[@CarCraftAutoDetailing]

You could certainly stack them as they both have great paint enhancement abilities, but Lustre would be the one of the two that has the superior ability to add gloss and depth that’s hard to achieve on silver paint.

[@AlessiaandFamily]

Nice video..did you have try a product Carlack/Carluck 68 ?how about it ?

[@paulclaeys7631]

Hi Sandro!! Always great to check some of your older videos. This review is again spot on, and makes me very curious to testing them out. Unfortunately, as I live in Belgium, Europe, I can't get a hold of NV Nova here... at least not if you're willing to pay an extra 100 bucks just to import them. This brings me to my question: what is a good alternative to, for example Nova Jet? What brand provides the same capabilities? I'm curious as I am a big fan of excellent water behaviour 😊😎 Thnx! Happy NY!

[@CarCraftAutoDetailing]

Thanks and happy new year! A couple of other sealants that I’ve found to be very hydrophobic and should be available in your area are Sonax BSD and Meguiars HCW

[@lawrencegambale3683]

Awesome mate. Thanks for the discount code, it will come in handy in buying 1ltr amounts! As for future discounts/giveaways etc. I'm all for it if it helps your channel etc. On a side note - do you decide how many ads are in each video you upload or is it youtube?

[@lawrencegambale3683]

@@CarCraftAutoDetailingNo problems mate, you give so much a few ads don't matter too much. It just varies sometimes on how many ad's are in each video. i think I had 3 on this, so not too bad. And I love the last few minutes, the music and just the beads was pretty relaxing!

[@joshuat4141]

@@lawrencegambale3683 I often skip to the end of a video, let it run the last little bit to the very end and then back it up to the beginning and have noticed the adds go away.

[@philipbaio2237]

OK I will give him a call and thank you

[@brittoncross3410]

Thanks Sandro for your videos, very informative and has got me wanting to be more fanatical about my car. I was thinking of getting a paint correction then treating it with these NV Nova products. Is this a reasonable way to care for my car ? Should it be polished/treated with something in between ? Unfortunately I live in Sydney, otherwise I would love to get you to work on it. (It's a 2009 White Audi A5) Would appreciate any advice.

[@CarCraftAutoDetailing]

You certainly don’t have to correct the paint before using then, a good wash and decontamination can do wonders in preparation, but correction will obviously help in further improving and preparing the paint for any paint protection and getting a little more out of them. But don’t feel you have to, you can always just try them to start with and always try correction layer on.

[@BradleyNilsen]

Would love to see Jet and Lustre up against GTechniq's C2v3!

[@monirulhaque8405]

Great review Sandro. Looking at getting all three Lustre, Jet, Boost. Which combination of microfibre cloths and how many should I be using from the Concours range (4 seasons, Jetstream, Thunderstorm) for each of these applications?

[@monirulhaque8405]

@@CarCraftAutoDetailing what about the Thunderstorm and Jetstream cloths? Do you recommend using these for any of the layers?

[@majesticdetail3422]

I'd really love to see you do a review on Clarify, Earaser and Meguiars Surface prep. There's been a lot of controversy over two of these IPA's. If you need you need some help with products reach out to me and I'll be more than happy to help. Your breakdowns and knowledge are beyond no others.

[@qwikss4469]

What is the controversy?

[@atrimmer3009]

Great review Sandro, many thanks for the explanation and the coupon discount. You must have sent hundreds of customers to these suppliers over the years from your channel ! Q : Do you have to discard the microfiber towels after leveling and buffing off ? I heard with other ceramic coatings the towels get crystallized deposits in the fiber. Cheers

[@atrimmer3009]

Ok great - thanks for the tip Sandro, will look to get some Nv and get to it, cheers :-D

[@ZetaTango83]

Jet streaks/smears like crazy in warm weather. Even my gf notices the haze on my car surface after jet is applied. Beadmaker has more gloss than lustre. Boost is just a specific cleaning agent for coated surfaces. I have used jet n lustre and went back to bm n paint gloss on my ppf. The remaining jet is used as a drying aid on my windows.

[@ZetaTango83]

@@CarCraftAutoDetailing Yea i guess its the material(ppf) that i'm applying to and the hot climate that does not give me a good experience with jet. I need to use a damp towel to fully wipe off and it feels very grabby after that. Lustre, Bm and paint gloss are very slick during the final buff:) Definitely recommended for paint n ppf!

[@aaronmconie534]

Hi mate is it possible to do a review on the Nova Evo hybrid ceramic coating? Really interested to see how it works and what it’s like with nova jet and nova lustre on top. Might be asking a bit much lol

[@djjzz1234]

Hi Sandro i really like the Nova range but recently tried out the Lithium car car products and i have loved them especially Color Crush and Trim Serum have you tried these ones ?

[@CarCraftAutoDetailing]

No I unfortunately haven’t tried them yet!

[@c6z061]

I decided to purchase Nv Jet & Boost(I'm in the USA). I applied Jet to my magnetic metallic mustang GT last weekend. Application was very straight forward. I used a MF applicator for even coverage, then buffed with a low pile cloth. Buffing off took some elbow grease, but it came off with no streaking/smearing, with only a few wipes. Did not feel slick upon initial wipe off. No big deal. I'm really looking forward to the water behavior with the first wash in a few days. I will use Boost sparingly as a drying aid.

[@hayden199516]

Update? How did you end up liking it?

[@joshuat4141]

I have traditionally used Jescar power lock and used various toppers over the years with the most recent being beadmaker. I am looking for something exactly like this. Thank you for the video and coupon. Using the all 3 method, is it safe on trim and glass, and will this be equal or better than my power lock step? Can I use the boost as a drying aid after each maintenance wash rather than a dry application and get close to the same results. Thanks Again

[@lawrencegambale3683]

Joshua - My Powerlock (which I love BTW) sits in my cupboard, no longer used since I discovered Jet! And I use Boost after each wash and found it extends the life of my Lustre/Jet combo by quite a bit!

[@Brian_N]

Just ordered all 3! Along with some of their soaps. Thanks for the code! Can you do another review and or offer when NV Pyro is rereleases? Please!!! I want some of that too! Going to test this system on my car vs Carpro system with UK 3.0 on my dads side by side for the next year. Testing my theory to see if coating still makes sense in 2019/2020. If my car holds up as good as a car treated with cquartz uk 3.0 and topped with reload. If it works as well I might have to call consumer coatings dead for the time being. Luckily we both have the same car. Around the same age. Should be a like for like comparison.

[@hayden199516]

Did you end up testing, if so what were the results?

[@Brian_N]

Hayden Mcfarland yeah I did the carpro is a little more slick than my car with the NV trio of spray ons. The carpro also seems to sheet water better than the NV. Beading on the NV is great but yeah at the same time I think the carpro has a better balance of beading and sheeting from what I can tell. So yeah I think the carpro has a slight edge overall even thought more of a pain to apply. Traditional coatings still may still have their days number though. At least in my book. There is some stuff that should be announced at SEMA this year (if there is one). That should be pretty awesome. I can’t say exactly what it is. But I have tested in person. Super easy wipe on wipe off and a unique carrier of the SiO2 that is totally different than the rest of the market. Should last around a year maybe two I am told. We will see!

[@jukkarinta8670]

Any thoughts about using these on a waxed car (Collinite 476s)? Maybe I missed it, but appears the expectation seems to be ceramic coating as the base...?

[@brokenSnake]

I can't believe how streak free lustre is

[@JeFFskiees]

How often would you reapply lustre + jet? Every 6 months? And just maintained with boost after maintenance washes?

[@BleachKid264890]

would i still be able to reuse the microfibre cloth that i used to apply these coatings at a later date or would i be required to use a new one for every application?

[@gregsullivan7408]

Just got Jet. It must be fairly benign because i had a lot of streaks (due to incomplete buff-off), but this was easily removed hours later by spraying with an ONR solution (1:256) and gently wiping off. (I suspect plain water would have worked too). It is very hydrophobic though which is great. I'll see how it goes.

[@gregsullivan7408]

Update: I've just done another area, taking more time to prep, and paying more attention as I went along. It's actually very easy to buff off, requiring very little pressure on the cloth. I was able to almost get away with simply wiping it on until it disappeared, without flipping the cloth. (I still did, just to be safe). It dries & flashes off very rapidly, so it's best to spread it rapidly, to get the most out of the product.

[@CarCraftAutoDetailing]

Great to hear that mate!

[@briankrohn7482]

Hello I have a question I need help with. I live in the United States and just recieved my order of NV JET and NV BOOST. My truck is coated with Cquartz UK 3.0 for a year now and I use reload as a topper. I will be decontaminating the surface and re-polishing with carpro essence plus. OK so I have 1 1/2 bottles of reload left and don't want to waste it. Would you recommend I use reload as fist layer over coating then JET then BOOST since the carpro products with sio2 would all be meshed together. I would love any help please.

[@insanemig]

I would definitely try these products but Unfortunately it’s not available in Europe . It looks to be the real deal

[@aalfonso4706]

Hi Sandro , have you tried Boost V2 ? I’m thinking of ordering it but was just searching to see if you have done a video on it . Thanks

[@CarCraftAutoDetailing]

No video but I have used it quite a bit, I think it’s a fantastic sealant that is as easy to use a quick detailer and certainly recommend it.

[@tzitzos77]

Sandro ciao. First of all thx you for your amazing videos. Because of you i have learn ( steal learning ) how to care my car my friend. I almost have watch all of your videos. Thx you so much. The guides that you make and the way that you make them are really on another level. I want to write down what i have learn from you and what products i was using and what i use now ( only S20 black and only lake country HDO pads) but it will take toooo much time and you will read until tomorrow :p :p So one question. If you had to choose between this products below what you had choose? 1. Soft99 Fusso Coat + Soft99 Fusso Coat Spray 2. CarPro Reload + CarPro Elixir 3. Gyeon Q2 CanCoat + Gyeon Q2M QuickDetailer ( or maybe better the new Gyeon Q2M CeramicDetailer ) 4. Nv Nova Lustre + Nv Nova Jet I know that a true ceramic coat will be better but i prefer the products kits that i have mentioned on the top. The first of every kit products will be use every 3 months and the second one for the maintenance every 1/2 week that i wash my car. At the moment i have use the first two kits ( i mean the soft99 and carpro ) and to tell you the true i think Soft99 beats by far the carpro kit. The 3 and 4 from yours experience will be better? Thx you m8 and i really appreciated if you will answer me. George from italy

[@CarCraftAutoDetailing]

Hi George, that’s really great to hear and I really appreciate the kind feedback! Gyeon can coat is actually a true ceramic coating so you will probably find it lasts longer than all the rest, and I think it’s actually pretty good overall. I haven’t used Q2M ceramic detailer, just Cure so I can say what it’s like. You probably know that I love Lustre and Jet so I do tend to recommend them, but if longevity is more important, then can coat should last the longest, Lustre may give you more gloss and Jet will tend to be the most hydrophobic, so in the end it depends what’s most important to you!

[@tzitzos77]

@@CarCraftAutoDetailing Thx you Sandro, Thx you very much for the answer. I will try to found a way to buy this Nova Car Care products to try them out. Boost is important or Lustre + Jet it's ok? I mean for every 10/15 days maintenance it's ok to use Jet (after put first Lustre) ? or it better Lustre + Jet + Boost? Maybe 3 products too much? I don't care about longevity thats why until now haven't try out can coat ( also i don't like too much Gyeon products :p the only one that i use adter trying some of them is Wet Coat to my rims ) or use another ceramic like Uk 3.0 that i have bought it but never use it . Yesterday has arrived also the shinamate EX620 15 after seeing your review and i want to try it out to refine a little more my Jaguar F-Type (until now i used shinamate ero600 ) The problem with your videos is that you make me spend too much money :p :p :p (joking of course) Thx m8 George

[@CarCraftAutoDetailing]

Lol yes there’s always money to be spent on detailing products! But I think you’ll like the 620-15! You don’t have get Boost, maybe just start with Lustre and Jet and see how you go. Everyone is s little different, most people seem to like Lustre more than Jet and some people don’t like Boost as much, so it’s hard for me to say what you will personally like, so maybe just start with those two and if you like them you can always get Boost layer on.

[@user-bf6go9nf6g]

Lustre looks amazing on my car! Do you know if it is SI02 based or traditional polymer? I do not see any SI02 on its MSDS sheet, but maybe it is excluded from the sheet. Thank you!

[@CarCraftAutoDetailing]

Yes it contains SiO2 ingredients

[@JNDK]

Sandro, Pan the organizer has just made mention of you in his latest video 😊

[@CarCraftAutoDetailing]

Yes he notified me via Instagram, it was great to see him give Nv a go!

[@gufiaito69able]

Damn it, these where my go to products that gave me the edge now every body is going to jump on the train.

[@fastmonaro05]

Oh, Sandro. I was one who asked previously questions so I am looking forward to watching this several times. And thanks for that. Love this discount opportunity. And YES YES I am interested in those discounts and the comparisons you do. The explanation was great as well. So now we all know how to apply, choose and layer these great products. But I do have to ask. Your previous results with EVO & Pro were truly outstanding in the levels of gloss, looks and protection even after several months when getting those cars back in. Did you or do you recommend using any of these over EVO or PRO existing coatings as some suggest as the sacrificial layer or just carefully wash the original coating and leave alone???? Certainly, after seeing the results Luster for sheer looks and Jet for that incredible protection. And Boost is the new kid for the renovation of any existing protection which can be wax, sealant or coating, great you pointed that out too. Yes, ALL THREE would cover all bases. The point I wanted to make is if you already have a super-duper EVO or PRO coating with all the prep time and their already brilliant properties are you not going backwards by covering that up with any of these???? Or I assume they are designed to work together and instead enhance???? But again Sandro THANKS for the time taken to educate all us people passionate about making cars look their best. I appreciate like many others as it really gives us professional knowledge just by watching and saving us heaps of time since you already have conducted the experiments. You would make a good scientist. Reminds of the high school days trying to blow things up!!!!!

[@philipbaio2237]

Where could I order Lustre

[@fastmonaro05]

@@philipbaio2237 Look up WAXIT online. That is where I get mine or try Detailingshed.

[@John-gl3ky]

Hi Sandro. Have you tried cquartz lite?

[@kevindugan8247]

How long should I wait between layering luster and jet.New to the product line.

[@BradleyNilsen]

Hi Sandro! Is Jet built on an SiO2 framework or is does it use another base? Wondering how Jet would be as a 6 month maintenance on CarPro Coatings instead of reload

[@christopherweir9419]

I use Jet over CQUK3.0 and it works great. I have found that it has a better chemical resistance than Reload with slightly better hydrophobic properties.

[@stevecheshire5046]

Boost I found easy to apply n remove. When I used lustre it was smearing and difficult to wipe clean.

[@kylechow6072]

thats odd because i have all three and i find jet quite difficult to remove, and lustre the easiest of the 3.

[@c6z061]

Hi Sandro, did my first wash a week after applying jet. I foamed with Griots surface wash. When I rinsed, the water behavior was insane. After hand washing using P&S soap, which is supposed to just clean, I noticed the water behavior dropped off a bit. I would assume it left something behind that required a lot of rinsing. Which soap do you find doesn’t require a lot of rinsing or leaves the least behind?

[@gregsullivan7408]

Did you consider the other possibility - that the wash removed some of the Jet?

[@LuisAc]

Is Nova out of bussiness ?? i can't find any of their products in the US or the links you provided.

[@bobbymelanson]

Hey Sandro...was hope you could help me with some advice. If I didn’t have the option to do paint correction would you still recommend do all other paint preparation and using the Jet/ Lustre combo? Specifically, I was wondering if I should clay the car with concern that I may add scratches or marring prior to applying these products considering I won’t be compounding or polishing. Would you say to still go for it and do all standard decon steps to best prepare paint for application? Thx for all the help you provide us!

[@CarCraftAutoDetailing]

Yes I’d still tend to recommend doing a full decontamination as removing fallout and traffic film is important to do periodically for the well being and health of the paint and it will obviously also help produce a better bond with your paint protection products. Unless the paint is very soft you shouldn’t cause too much marring with clay, but using something like Nv Finesse or another light polish even by hand should take care of any clay marring and additionally deep clean the paint which should also further improve or the performance of Jet and Lustre and boost the gloss and clarity of the paint, but it’s not mandatory.

[@bobbymelanson]

@@CarCraftAutoDetailing thanks Sandro! Very helpful. Hope to come train with you some day.

[@jatiyanon]

How can I order some ship to Thailand? I remembered that the NV/Waxit website had previously been allowed to order, but now it's closed.

[@stvcrgy55]

Would love to try these but man are they hard to get in the US.

[@sonnynguyen3312]

Hi Sandro. What sequence would you apply the three for Black Euro cars, Lustre + Jet + Boost or Jet + Lustre + Boost?

[@CarCraftAutoDetailing]

I would personal go Lustre, Jet, Boost

[@mahmoudbenrabeh2106]

Hello dear , is amazing video , please i want ask if i can use nova jet + lustre jet and wish the first to use ?

[@CarCraftAutoDetailing]

Yes, and like using Lustre then Jet and Boost last on top

[@mujjuman]

What is a good alternative for Nv Lustre? It's currently out of stock for the US. I'm thinking CarPro Reload? I want to top it with Nv Jet... already have Jet on order.

[@mujjuman]

@@CarCraftAutoDetailing Thank you!!

[@mag1vl]

Hey Sandro I've been doing the Lustre + Nova Jet and Boost but I'm getting a new front bar + painting it, so long before I can start using the goods on it? Thanks

[@mag1vl]

@@CarCraftAutoDetailing Thanks very much Sandro and cheers :)

[@alexmatheny9295]

Would Jet still work well using a spray on and rinse off method? Im looking for something that makes the surface super hydrophobic that you can just spray on and rinse off and then blow dry the car well. I work at a dealership car wash and we dont have the time to truly apply stuff and work it in around the whole car.

[@CarCraftAutoDetailing]

No, your best bet would be something like Carpro Hydro2

[@philipbaio2237]

Could you let me know when they come in. I will buy all 3. Thank you for your reply.

[@CarCraftAutoDetailing]

Unfortunately I’ve got nothing to do with the sale of these products, but if you contact Nick at Parks detail through the website I’m sure he’ll help you out!

[@chadj8349]

I want to try all these products but until NV/NOVA gets a distributor in the states it’s not economical to pay the huge shipping cost.

[@prestonbeast]

So I am not a professional and want this for my own personal vehicles. Would the best bet be to wash. iron decon. panel wipe. than lustre than jet than weekly boost toppers? i do not compound and polish.

[@Matthew-yi3bm]

Hi, I ordered Jett and Lustre from the NV Nova site and mentioned Car Craft Auto and Pan. Got a 10% discount code immediately. I was wondering, Would you use Lustre firstly and after two hours apply Jett or you prefer to use Lustre as directed and maybe add Jett two - four weeks later on top or Lustre ??? I actually have both products in hand ready to use but would like some guidance before I use one or both. Thanks

[@CarCraftAutoDetailing]

There’s really no rules either way. I’d normally apply Lustre first and then add Jet either an hour or two later or after the next maintenance wash.

[@Matthew-yi3bm]

Sounds great thanks.

[@spasticflies]

I applied lustre followed by jet after having my car professionally evo ceramic coated but it was a windy winters day and not sure if i did a good job. I was thinking of reapplying lustre and jet again. Can I reapply on top of the existing coats or do I need to clay the car? I really hope I dont need to clay the car. Dont want to ruin the ceramic coating

[@CarCraftAutoDetailing]

No you certainly don’t need to clay, you can just reapply them

[@rotemshoshani424]

Hi Sandro, you sold me on these and I was able to order all the way from Israel using NVs US rep. I have Gyeon Cancoat applied about 3 weeks ago, would really like to top it up with Lustre for that extra gloss/slickness (highly metallic white paint), would the hydrophobicity of Cancoat be decreased with Lustre? Have you ever tried topping a ceramic with it? Greetings from Israel, I’m a big fan of your videos!

[@CarCraftAutoDetailing]

Lustre’s strongest characteristics are its super high gloss and slickness, its hydrophobicity is still very good but may not be as hydrophobic as CanCoat. The new Boost V2 may be worth a go as it’s really a balance of both Lustre and Jet and will be extremely Hydrophobic if that’s top of your list.

[@rotemshoshani424]

@@CarCraftAutoDetailing so topping cancoat with it would mask the hydrophobic properties..? Might do a test panel and see if i enjoy it, 2nd car has Fusso on it and IMO slickness and self cleaning seem touch superior to cancoat, i like the feel of w drying towel on it and thought Lustre on top of cancoat would be able to achieve that Thanks for taking the time to reply! ❤️

[@qwikss4469]

Hi Sandro, did NV changed the formulas when they be switched from Nova? Brian from Apex showed that NV Jet darkened more than Lustre, you got the opposite results.

[@CarCraftAutoDetailing]

No the formulas haven’t changed, but there’s always variations in tests from one person to another which depends on many things like the specific application, the specific paint the lighting used to view it and even the level of prep and correction before they are applied. I have my way of doing those things and others will have there own way which can certainly influence the results, not only on the darkening effect but all other tests and results.