Specs of this build 1 (note these links might include affiliate links which earn me a commission at no extra cost to you): Motherboard - Asrock Z790 Livemixer kzbin.info/www/bejne/iIPUgY2Ki7ShmpI CPU - Intel Core i9-14900K (amzn.to/3QH6uUv) RAM - Crucial DDR5 6000MHz Pro series RAM amzn.to/3UnPS6t NVMe SSD - PNY CS3150 amzn.to/3KVWZNZ SSD - Crucial MX500 2TB and Crucial BX500 2TB kzbin.info/www/bejne/f4Ctf6yYgL9nrc0 PSU - Lian Li Edge1000 Platinum amzn.to/45PIXat AIO - Lian Li Hydroshift LCD 360R amzn.to/3RRwJZi Fans - Lian Li SL120 V2 kzbin.info/www/bejne/bmfJkop6e8Rqors Case - NZXT H7 Flow RGB kzbin.info/www/bejne/onarqHqGbtiff6c GPU - Gigabyte Vision RTX 3090 amzn.to/4bvNLTM NZXT Vertical GPU mount amzn.to/3XM38UN Specs of build 2 Motherboard - Asrock Z790 Livemixer kzbin.info/www/bejne/iIPUgY2Ki7ShmpI CPU - Intel Core i9-14900K (amzn.to/3QH6uUv) RAM - Crucial DDR5 6000MHz Pro series RAM amzn.to/3UnPS6t NVMe SSD - PNY CS3150 amzn.to/3KVWZNZ SSD - Crucial MX500 2TB and Crucial BX500 2TB kzbin.info/www/bejne/f4Ctf6yYgL9nrc0 PSU - NZXT C1500 Platinum amzn.to/3VSqZ3E AIO - NZXT Kraken 360 kzbin.info/www/bejne/fWbVZIZ9aKZ2rac Fans - NZXT F360 RGB Core fans kzbin.info/www/bejne/jKWripSbhquNbs0 Case - NZXT H7 Flow RGB GPU - Gigabyte RTX 4070 Ti 12g OC - kzbin.info/www/bejne/lV7FpmmnedaYjaM Or Asus ROG Strix RTX 4090 OC White Edition (amzn.to/3tr1nzc)
@EduPimentel3 ай бұрын
Did you run into any issues mounting the vertical GPU mount? Nzxt s own FAQ say it's not compatible with this case ... Something about a 2mm gap for the screws, but you didn't seem to have any issues ..
@Kapono51504 ай бұрын
I really like how the bottom fans sit flush with the panel
@R6ex25 күн бұрын
I'm slapping on Silverstone dust filters onto this case when I buy it next year.
@McÐädi4 ай бұрын
NZXT H7 Flow is a amazing case. I have 3 x 140mm rgb fan in front. Rear 1 x 140mm rgb. Water cooling with processor and radiator on top with two 140mm rgb fan. All fans and water cooler of course also from NZXT.
@BigNickTx4 ай бұрын
nice to know that 140mm fits on front and back, and cool name btw ;)
@SobeR9992 ай бұрын
Hello. Does it stop dust from entering?
@MorgFlame4 ай бұрын
For my next pc build for 2025/2026 this is 100% my case unless we see a huge case thats so good it changes the pc case industry
@TheProvokedPrawn4 ай бұрын
There are plenty of interesting ones. I expect NZXT will have some intriguing ones by next year too.
@iTzBr1an112 күн бұрын
one issue with this case is the little foot on the NZXT vertical gpu mount does make contact with the case and I thought it would considering NZXT claims this Vertical mount work perfectly
@miticav37092 ай бұрын
Two months since the video. Are you still using this case? If yes, a few questions: - I use Define 7 now, and i like quiet/sound dampening panels it has. Once you have adjusted the SSD fan what was the noise DB of the case? - I ordered it and am thinking if i keep it, to buy some amazon magnetic dust filters, since i think it will get dusty, did you consider that?
@inksword602910 күн бұрын
I don't know how I didn't realize sooner and I feel dumb lol but the aio intake caused worse temperatures because the fans are too close to the GPU since it's so big, with a smaller GPU or a wider case I think push pull intake aio would've performed better and that's also why like side mounted aios since they get around this problem
@4cCr02 ай бұрын
great video and beautiful assembly, one question, were you able to see if the temperatures of your hard drives increased? since they go behind the cpu and according to what I read in that location the hard drives heat up more
@TheProvokedPrawn2 ай бұрын
That's not something I tested I'm afraid.
@Phenixzero3 ай бұрын
Does the vertical GPU bracket can be compatible with previous version? Or did NZXT have new version?
@inksword602912 күн бұрын
I wanted to build a PC with this case but I'm surprised the temperatures are worse with the aio on the front :/
@cheekster7774 ай бұрын
Thank you my friend.
@TheProvokedPrawn4 ай бұрын
No, thank you
@cheekster7774 ай бұрын
@@TheProvokedPrawn 🤩🫡
@freakiehammieАй бұрын
Hi, just wondering if this case fit the lian li TL fans?
@Psylentt4 ай бұрын
Very nice review! Question: I bought 4 Noctua NF-A14 fans (140mm) to replace the triple in front and add a fan as exhaust. I'm not running any fans up top because I'm using a Noctua NH-U12A air cooler. Do you think it's reasonable to shift the included triple fan from the front to the bottom and get decent airflow still or should I consider replacing the triple on bottom considering they are not as powerful as the retail version of the NZXT fans?
@mgoogyiАй бұрын
Most likely your best setup is to fill everything in the front and the bottom, one in the rear and add one at the top. The top one works well if it is behind your cpu cooler. How do you like your cases so far? What about dust?
@PsylenttАй бұрын
@@mgoogyi I really like the case! It was super easy to build in and the air flow is very good. Dust is not bad; there is a small amount of dust to wipe down the front and underside maybe once every 2 weeks? The underside could use a filter would be my only complaint. I will say that my CPU temps (peaks) are a bit high (90C) while playing something like Star Citizen at times, but I think that's due to my setup; 13900k + 4080 super. These are only peaks and don't ever seem to sustain these temps. I'd say under fairly heavy load, I get about 77C.
@AlwaysAstralАй бұрын
What software is that Fan Control?
@MorgFlame4 ай бұрын
Which case fo you prefer? H6 flow or the H7 flow?
@TheProvokedPrawn4 ай бұрын
They're both good. Quite different looks and I preferred the unusual design of the H6 personally.
@neteroipman44782 ай бұрын
#TheProvokedPawn can i use in that case those icue link fans?
@ProllytumnАй бұрын
Are the bottom fans included?
@R6ex25 күн бұрын
Nope, but I will reposition the included 3x120 front panels fans onto the bottom and buy 140 fans for front and back.
@boostedsti043 ай бұрын
Do the gpu temps change much between vertical and horizontal mount?
@R6ex25 күн бұрын
Horizontal lower GPU temps.
@AmateurGT4 ай бұрын
Would it be possible to take out the hydro shift aio fan and reuse my old SL inf fan from my Galahad aio?
@TheProvokedPrawn4 ай бұрын
I replaced them with the SL120 V2 fans but the logic would be the same
@Weyco234 ай бұрын
With all the m.2 slots on most motherboards now, why would you even put SSD’s, or old school spinning drives? I have 4 slots and 10TB of storage. More than I’ll ever need.
@TheProvokedPrawn4 ай бұрын
SATA drives are still cheaper for more capacity though
@Aquantia-xu4qw4 ай бұрын
If I have a Lian Li SL UNI HUB TL Series controller, can I connect the Uni Fan SL-INF fan to it?
@TheProvokedPrawn4 ай бұрын
each of Lian Li's different fans need their own controller. So no, you'd have to use two controllers.
@Aquantia-xu4qw4 ай бұрын
@@TheProvokedPrawn Thank you.🤝
@poopoppy4 ай бұрын
Nice build. That's annoying.
@Jarrahfe2 ай бұрын
5:45 made me think about it, and now confused
@TheProvokedPrawn2 ай бұрын
kzbin.info/www/bejne/p4LGqox-fNl0qNU
@Jarrahfe2 ай бұрын
@@TheProvokedPrawn fastest reply , thanks! 😃
@1davejsutdave14 ай бұрын
Why not use push pull with all that bottom space?
@TheProvokedPrawn4 ай бұрын
You shouldn't bottom mount a radiator as the pump would be the highest point and that would mess with the longevity of it
@dianaalyssa87264 ай бұрын
Seems a bit tight for the 4090.
@TheProvokedPrawn4 ай бұрын
It was when I did push pull but any normal build would be fine
@kanoeyuuko1953 ай бұрын
Does anyone own this case and RTX 4070 Super aorus master? does it fit in there?
@TheProvokedPrawn3 ай бұрын
@@kanoeyuuko195 I put a 4090 in it. A 4070 won't be a problem
@kanoeyuuko1953 ай бұрын
@@TheProvokedPrawn now i see i missclicked. i meant 4080Super aorus master but if the 4090 fits then it is fine
@Hxrshmello4 ай бұрын
Noice
@neuromaskАй бұрын
Rear fan still doesn't match idea of hidden clean fans.
@OGHawkeye4 ай бұрын
Don’t mean to seem troll like because I kinda criticized you on a recent video but I was wrong, and I’m still a huge fan of what you do. BUT got dannngg man that motherboard is so ugly and cheap looking I really wish you would stop using it for your showcases. Just personal preference I guess but I feel like it’s an absolutely horrible looking board aesthetically
@TheProvokedPrawn4 ай бұрын
That is definitely a personal preference. I think it's lovely. But I won't be using it again anyway as I've got some others to show next. 😜