Odyssey Putter Full Restoration

Please check out my other channel! Will be all NON golf related content!
/ @itry9066
This is an old Odyssey putter I picked up on eBay to restore for my brother. His putter is the same head design, but no name and all beat up. His go to colors are purple and black so, thought this would suit him well. Enjoy!
Any questions about anything feel free to ask!
[e-mail]
Instagram: igolf906

[@beveridge1313]

polishing the steel on that wheel was very satisfying. also that pour of the face turned out b-e-a utiful! nice job!

[@paulwatts9454]

I dig that insert. Now I see why Odyssey wants nothing to do with restoration. That's a lot of work

[@igolf906]

Thanks! I planned to replace that insert with a factory one but, had no idea it was a poured insert until I attempted to remove it. So I improvised!

[@FBRR2]

that "insert" is not level. and is not a good "putting" surface now!!!!!!!!!!!!!!!

[@patricksorigami]

Can't figure out what you used for the purple insert? ​@@igolf906

[@tommurphy2064]

This is awesome. Especially because it’s a lefty! I have an old school Ray Cook Billy Baroo putter that I’ve always had that I have been meaning to restore. Got it from my Dad, who is a lefty like me, so I have just always used it. This has inspired me!

[@markcoleman8568]

Sorry 😢 but it looks good - however, you kill the putter by pulling out insert and putting hard resin face?

[@igolf906]

I replied to an earlier response of yours but. Its actually softer than you may think. My brother used this yesterday for the first time and loves it. Its a nice soft click off the face which he likes.

[@isaacdiasabeygunawardena1575]

Could I send you My putter?!

[@igolf906]

Not currently taking anymore putters in. Check back here as I will post when I am ready.

[@jaybee7890]

Amazing job, but wouldn't that insert have totally different feel and roll characteristics which could actually affect putting?

[@igolf906]

I've putt with it before and after making the insert. It made it a more firm, audible click off the face. Feels pretty good really. And it was a gift for my brother. He loves it!

[@davehoffman1475]

I have that exact putter. I’d love to know someone who could restore mine that way. Excellent video, the putter looks beautiful. Thanks

[@igolf906]

Shoot me an email. We cant talk about it!

[@leegrocott4659]

Hey. Looking for some advice please. I can't get the stainless black in the UK & the product I thought would work the same really hasn't done anything. Do you have any products I could try?

[@igolf906]

Try this. Caswell has some of the best finishing options in the World. I've never used this particular product but I bet it's of the same quality or better than the Sculpt I used. www.caswelleurope.co.uk/stainless-steel-blackener-1-litre/

[@ross1880]

It looks cool, but is it as good as the original

[@igolf906]

My brother's been gaming it for almost two years now and loves it. I bet 95% of casual golfers wouldn't notice the difference between the two resin inserts. 🤷‍♂️ Even for me, it actually felt pretty good off the face.

[@ross1880]

@igolf906 Thanks for letting me know. I bought the same putter at a garage sale for $20, and I really like it. But it would be nice to restore it

[@ross1880]

​@@igolf906I also like the history of the putter, Nick Faldo won the 1996 Masters with the same exact putter!

[@igolf906]

@@ross1880 Very cool!

[@carlos97828]

In order foe the patina to activate do you need to bead blast the putter or would only sanding work?

[@igolf906]

Just sanding would work, it just won't be as uniform of a finish. Most importantly needs to be a clean surface.

[@leosotelo5119]

dang! great job bro!!

[@igolf906]

Thank you! My brother is still using this and loves it!

[@jontorrescomedy]

Did you fill the entire face insert area with epoxy? I'm doing a similar rebuild right now and I'm not sure how to fill in the face insert to put a urethan insert in

[@igolf906]

Yes. You would just have to fill it to match the depth of whatever insert you have. These Factory Inserts were also poured so any Inserts you're using might not fit. Definitely need to test fit them first.

[@williamavrett]

Why did you remove the insert? Changes everything about the putter

[@igolf906]

My plan was to powder coat the putter black for a super durable finish. That would involve baking it so I had to remove the insert regardless as it was a soft resin type plastic. I did NOT know that it was originally a poured insert so, I had to improvise. And the resin face actually feels softer than you may think. My brother used it for the first time yesterday and loves it.

[@rbslammed6163]

Soaking it in the acetone overnight would have taken care of the insert btw

[@igolf906]

Acetone barely put a dent in the insert.

[@Cookstanza]

Was your putter stainless or carbon steel? Debating trying to use gun blue but only works on carbon not on SS

[@igolf906]

This putter is stainless steel. That's why I used the special Stainless Black solution

[@rexy84]

What type of wheel did you use to remove all the dings? Great resto

[@igolf906]

Thanks! If you check out any of my newer videos, I list all of my current tools and equipment in the description!

[@fowlkeskm]

Outstanding Work!

[@igolf906]

Thank you!

[@oliverbrown4601]

Got the exact same putter and now fancying changing it to look something similar... good work

[@igolf906]

Very cool!

[@oliverbrown4601]

@@igolf906 shame I don't quite have the skills of you to do this😂

[@igolf906]

@@oliverbrown4601 Nah. If I can do it anyone can. Just takes time, and a lot of watching KZbin videos 🤣

[@nnovillo]

Beautiful, thank you? Could you specify the products and the amounts you use to produce the epoxy mixture? thank you!

[@igolf906]

It was a simple two part epoxy mixed with powdered pigment.

[@VictoriaNovilloSaravia]

@@igolf906 Isn't the curated final feel of the resine like glass? Shouldn't we add some rubber powder to make it a little flexible?

[@igolf906]

@VictoriaNovilloSaravia No. It doesn't feel anything like glass. It's much softer than that. Almost like any other polymer or resin type insert.

[@connectlogic]

should have just left it polished. im guessing a restoration like this costs more than a new club?

[@igolf906]

This was done for my brother. He wanted all of these colors as they were. And I'm not currently doing this type of restoration for anyone really but, if I were to put a cost on it, it would probably be close. Would be more for the person that has a sentimental club or maybe if they find a high end Scotty or something similar for cheap and wanted it restored.

[@connectlogic]

@@igolf906 ok ty for reply .ive got an odessy 7 i wouldnt mind restoring but if it will cost me over £100 i might as well buya new one and sell this for 40 percent of the cost of my new one .

[@Growhio330]

The face looks amazing

[@igolf906]

Thank you!

[@joanntalbot8004]

Now just needs to be balanced as its defo off.

[@igolf906]

It's perfectly face balanced and the headweight only changed by 3 or 4 grams. Overall weight is nearly identical to factory because of the grip that was installed. 🤷‍♂️

[@installutionslimited4375]

How was the face finished ? The important bit …

[@igolf906]

It was a custom poured polymer. Leveled out flat. Lightly touched with a torch to release any bubbles and keep it glossy.

[@jakedayley899]

Can you send a link to the wheel you used on your bench grinder?

[@igolf906]

Check any of my more recent videos. There's links to everything in there.

[@travismj33]

Cool video! What did you use to get the excess paint off? Paint thinner? Surprised it didn't mess with the stain at all.

[@igolf906]

Acetone. And no surprisingly didn't affect the dye. But I've since switched to cerakote so don't have to worry about any of that anymore. 🙂

[@travismj33]

@@igolf906 nice! I'm wanting to paint my red odyssey logo blue, so this video really helped!

[@igolf906]

@@travismj33 glad to help!

[@hugocadeddu7177]

What kind of wheel do you use ? Please 🤩

[@igolf906]

It's a Convolute wheel. Check my newer videos descriptions, they have links on where to get them.

[@rojalesgary7355]

It’s the sort of job that I would thoroughly enjoy doing as you have to be meticulous to do it 👍

[@rossandrews119]

What polishing wheel is that it looked great.

[@igolf906]

Thank you! Its actually called a Convolute Wheel. Or a deburring wheel. Its a very dense, but soft material that blends, and polishes steel quite nicely.

[@dbabaron]

Looks great! Motivated me to get to work on some of my old clubs. Was the original insert textured? Did the new insert being smooth effect ball roll?

[@igolf906]

The original insert was not textured. And for ball roll, I wouldn't say the roll was affected but the sound definitely changed. More of a soft click now compared to how it was.

[@골룸프로]

너 임마 오른손잡이잖아

[@iamaw30]

What kind of wheel was on that bench grinder?

[@igolf906]

They're convolute/deburring wheels. Check any of my newer videos I have all the wheels I use listed in the description.

[@iamaw30]

@@igolf906 thanks! I'll check those videos out for sure.

[@benitoclawson3743]

𝓅𝓇o𝓂o𝓈𝓂

[@stevenrandolph2011]

How did you get the epoxy on the face so flat ? Seems too little or too much could cause issues but yours looks laser flat

[@igolf906]

I leveled the putter prior to make sure it was as flat as possible. I also warmed up the epoxy so it could flow better. From there I used the popsicle stick to take out some of the epoxy so it butt up with the face as perfect as I could get. My brother still uses this putter today and its great!

[@stevenrandolph2011]

@@igolf906 I run a Cerakote coating company and I’m doing one like it for my daughter. It belonged to her late Grandfather so it will be special to her. I found there are some inserts you can buy but you have to clamp the insert off and fill the cavity from the shaft hole I’m guessing. Not sure which route to take

[@igolf906]

Yes, some are tricky with the inserts. I had to do the same with an old piece of shaft. And Cerakote is the way to go! I solely use Cerakote for all colored restores now. @@stevenrandolph2011

[@danielteeter1273]

As a fellow lefty I salute you. Great job! Love the black finish and the putter face. Very well done!

[@DooterEMT]

what is the putter face insert?

[@igolf906]

It's poured epoxy resin

[@austinhamby8699]

Looks amazing! I have the same putter! First one I ever bought! Needs refurb

[@nicholdas]

what kind of wheel was that

[@igolf906]

It's a convolute/deburring wheel. Check my newer video descriptions it has links to all my tools and materials.

[@efarney1]

Wow that was awesome, really great content! Thank you for sharing!

[@igolf906]

Thank you! Stay tuned. Video coming out in the next hour you won't want to miss!

[@salongkim5988]

I want to know the brand of epoxy I want to restore it I want to know. How did you mix epoxy?

[@Luke-rj6bw]

What Grit Sandpaper was used?

[@igolf906]

For the rear cavity, was 220

[@Luke-rj6bw]

@@igolf906 2 years later and you still respond, respect. And thank you for that info!

[@andrewdilworth9180]

Cheeper to buy a new one

[@andrewdilworth9180]

Looks great tho

[@igolf906]

Being a restorer, this is 95% time and labor. Being for myself, or as a gift, actual costs are irrelevant. As far as customers, most send in Scotties, which in that case is not cheaper to buy a new one.

[@zadecoley9337]

Is there a hardware store u can buy the steel blackener? Or best to just order online? U think a stainless steel shaft can be blackened this way too? Lastly, how long u think the finish will remain for a putter using it a couple times a week. Thanks and excellent work, keep posting cool videos. They are very helpful.

[@igolf906]

You will have to order something like that for sure. And I don't think shafts are stainless steel. They are chrome plated steel in which the stainless Black will not work. And my brother has been using his since this video and still looks like it did when I finished it. Just need to take care of it and use a headcover

[@johnnyparker9928]

Very nice, I wish I had the time and patience.

[@rotfan77]

I would be tempted to just leave it silver and put some new black paint on it( odyssey). It still looks really nice. No chance of it chipping that way.

[@igolf906]

This was dyed. So it won't chip. But eventually yes, it will wear out. This is my brother's putter so I'll check on it the next time we play!

[@tylerkreim1770]

Absolutely amazing job man. Love that insert and the whole process. How does it feel compared to the original?

[@igolf906]

Thanks. It may feel slightly more firm than the original but overall still felt pretty good.

[@rotfan77]

What did you shine the metal up with and take the divots out with,it looks like a sharpening wheel that you might use for sharpening knives or blades unless it was a sanding wheel? Thanks

[@igolf906]

It's a convolute/deburring wheel. Check any of my newer videos in the description I have all the tools and materials I use.

[@tristonmoses4046]

I’m looking to do a black patina on a odyssey putter I’m doing. Does it have to be sand blasted prior to trying to the patina? What are your suggestions? ALSO is your new idea for the cerakote for the finish on the putter or for the paint for the words? What is cerakote? It seems much more difficult to use in your Nike putter restoration

[@igolf906]

It's suggested to be blasted prior but it just needed to be absolutely clean from anything in order to get a good finish. And yes Cerakote is a whole process that takes time and practice to be done properly.

[@rotfan77]

Amazing job, I would be scared that I wouldn’t get the shaft lined up correctly after removal.

[@igolf906]

Thank you! It's a little difficult but there are a few tricks.

[@ClubCustom-hi6zy]

Hi mate great video, what grit is the buffer wheel on this? I'm using an 80 grit and seems to be scratching!

[@igolf906]

Everything I use is in my video descriptions. Check them out. I hope you're not using a stone wheel as that will ruin your putter. I use convolute/deburring wheels

[@codyrankin3062]

What clear coat did you use and how long until it was hard enough for play. I just cold blued one of my putters and I feel like even the blueing comes off if I’m not careful

[@igolf906]

I just used a standard spray paint clear coat. And just a very thin layer. Just for a little added protection to the black patina. The black patina is decently durable on its own so. The clear coat just protected it a bit more. Currently, for any black finishes I do from now on, will be cerakote. Super durable baked finish.

[@joshuahalewood9240]

What grit sand paper did you use with the dremel. I’m struggling to get a nice consistency with it.

[@igolf906]

I don't use the dremel all that often but the drum wheels are anywhere from 60 grit to 240 grit. But hand sanding is absolutely necessary also after using a dremel.

[@salongkim5988]

At this time, what kind of work was done before the epoxy swelling and then the second epoxy work? If so, what is the reason?

[@igolf906]

I poured the face originally, but I had done a paint job on the putter that I didn't like the results, so had to sand everything back. So I drilled out the top layer of the face and re-poured

[@tylerklasko2520]

Where did you purchase that sanding wheel to initially sand down the head? That looked awesome

[@igolf906]

I picked those up at SuperGrit. Theyre Convolute wheels and they're amazing! They do so much work easily. They grind and polish all in one. About $15 for the 6x1x1. I got them in 3 different grits.

[@tylerklasko2520]

Awesome I appreciate that! Gona go grab some. What grit did you use for the one in this vid? Or did you use multiple?

[@igolf906]

@@tylerklasko2520 I have 100, 220 & 400. I used all 3, but the 100 grit is used for very heavy gouging. Depending on what you're working on, the 220 might work fine. They also have grits in between. Like 120 and 150.

[@abdrazak08]

Where are you located

[@shmirginhymer1867]

@@abdrazak08 I believe his latest Golf video mentions hes in Michigan.

[@대구더블유골프무역]

폴리싱할때 연마돌은 몇을사용하는가요

[@tristonmoses4046]

For the face did you use the same epoxy as your assembly epoxy or did you use a thicker resin type mix

[@igolf906]

I use Brampton Club epoxy for all assembly. The face insert I used a high strength Loctite Epoxy.

[@salongkim5988]

I want to learn how to work on epoxy on the head face more delicately I want to learn what kind of ingredients and mixes they made

[@igolf906]

I used standard 2 part epoxy that you can get from any hardware store for the face. And then I use Jacquard Pearl Ex powder dye for the color.

[@alexandremalbec9732]

Awesome restoration, I just want to know what kind of stone you use on your wheel to polish it because i want to restore a rossie 1 i bought

[@igolf906]

It's a convolute/deburring wheel. A stone would ruin the putter.

[@StanCrafted]

Absolutely fantastic!

[@calebkirk2156]

Does this change how the clubs play, could you do it with irons?

[@igolf906]

In this instance it changed the feel because I changed the actual insert. But most Restores no there's no affect on the feel. And I've restored a set of irons before but only because they were unplated Stainless steel blades. Other style irons are mostly chrome and nickel plated so i dont mess with them much.

[@donhampton7174]

What do you use to dye the epoxy. It looked like a powder? thanks

[@igolf906]

Yes it's called a Mica Powder. The brand I use I believe is called Jacquard? Some cool colors you can make.

[@donhampton7174]

@@igolf906 thank you

[@donhampton7174]

When you dye and pour an insert with epoxy, is the epoxy the same as shaft epoxy or another type? Thanks Also any tricks in mixing the Mica powder so i dont screw it up?

[@igolf906]

@@donhampton7174 no I used a long cure loctite epoxy. And you just mix in it with a popsicle stick.

[@donhampton7174]

thank you. many years ago i used epoxy to fill inserts in persimmon woods then hand filed them down. How do you finish your poured inserts and polish?@@igolf906

[@wkndwarrior4733]

This was awesome. How has it putted. I was little concerned about the curve of the epoxy on the face not being perfectly flat

[@igolf906]

I made sure the epoxy was warm, and the putter was leveled before pouring. It's nearly perfectly flat. As for the putter itself, it was for my brother. And he has no complaints! I putt a few with it before giving it to him and wasn't bad. Sort of a soft click off the face.

[@leegrocott4659]

Love this! What do you use to apply the black dye?

[@igolf906]

I used just a standard foam brush.

[@BiggestHoss]

what attachments do you use on your dremel? what grit sand wheels?

[@igolf906]

It's just the small drum sander. And I'm not sure what grit they are. I believe they're the standard that comes in the kit. Probably 80 grit. Pretty rough. You can get fiber drums but I hand sanded the rest.

[@christianklein4084]

If we don't have the capability to use the black shrink tube with a heat gun, but still want that satin finish look on the shaft, what do you recommend as another option to achieve that look? Would acrylic spray paint hold?

[@igolf906]

Years ago I spray painted my brothers putter all black. If you prep it and clean it well it will last awhile, but eventually will start to nick and wear out.

[@aaronlozano2205]

What did you use to take off excess testors paint?

[@igolf906]

Acetone

[@salongkim5988]

When working on epoxy on the head face, I saw that it was set to a certain height

[@igolf906]

I'm not sure what you mean, but I did level of the putter prior to pouring the epoxy. Also the epoxy was warm, so it leveled itself out after the pour. Leaving the face nice and square

[@griffindepauw3998]

How did you measure the epoxy to get it flush?

[@igolf906]

Poured it until it was close, then while it was still liquid, used the popsicle stick to remove it until it was level. Insert is still going strong to this day. My brother is still using it.

[@johnguelfo3067]

On that wheel you have ...did you use the 5P , 7P or other?

[@igolf906]

Looking back at my wheels, they are 7P. I didn't even notice it until I went back and looked. I thought that was 3M's charting numbers.

[@Gabemartinez_]

What did you use to wipe of the excess paint from the letting ?

[@igolf906]

Acetone and a shop towel (paper towel)

[@Kevla74]

How does ball feel off that face? Looks amazing

[@igolf906]

Surprisingly nice! The epoxy is hard enough that it still provides a good feel, with a soft click off the face. I was afraid it was going to be way too soft but, turned out great! This was for my brother and he loves it.

[@matthiasschmidt95]

Did you sand the new “insert” to be flush with the face? All-in-all stellar job, looks absolutely amazing

[@igolf906]

No. I leveled the putter prior to pouring the insert. I also warmed up the epoxy enough to make it more fluid. It leveled itself out nicely, and also kept the factory loft.

[@willlazenby1050]

Sweet restoration, sub added!

[@igolf906]

Thanks

[@danjoe22]

Great job, looks great. Did that insert material change the club in any way? Did it change the swing weight of the putter or the way the ball comes off the face when you putt? I suppose you could adapt to anything, including sound, but changing the material that actually strikes the ball seems inadvisable to me.

[@igolf906]

Works perfectly fine! Weight of the putter barely changed. Maybe a few grams difference. And the feel off the face in my opinion is great! I like a little click off the face, but still feel a bit soft. But, this was for my brother, so all that matters is he likes it, which he does.

[@crispyduck1706]

I’m still using my putter the same as this and got a spare

[@igolf906]

I might actually pick up another one of these and do another restore eventually!

[@markshi7052]

Hi,looks great,what did you add to epoxy metallic purple look? thanks

[@igolf906]

Pearl Ex. It's a powdered pigment for glues and epoxies.

[@markshi7052]

@@igolf906 Thanks for the fast response.God Bless

[@mckeever07]

Love the final finish. Could I ask what paint you would recommend? I want to restore my putter to its original colours

[@igolf906]

Paint for the finish or the actual paintfill? This was a stainless dye. But anything I do in black now gets cerakote. A much smoother, way more durable finish. And the paintfill paint is just Testors.

[@mckeever07]

@@igolf906 thanks for the quick reply... Paint for both actually. It's a red Taylormade Ardmore but has plenty of dings and scratches. I'm from Ireland so it would need to be very strongly weather resistant

[@mksmith713]

What was the loft after it was finished?

[@igolf906]

The factory loft I believe was 3*. So when I poured the epoxy face I leveled it out to match the factory loft.

[@donaldpeck688]

Would love to buy this putter!

[@igolf906]

Thanks! But this was a one-off for my brother.

[@darylwizzard5832]

Awesome results

[@richardliu9368]

is that a nylon fiber wheel?

[@igolf906]

It is yes. Its a convolute or deburring wheel. But it is fiber. There may be different types. But nylon is the most common I believe.

[@mikewilliams1479]

OMG - makes me wanna send my TM Spyder EX to you to be repainted

[@igolf906]

I no longer use this method. But I do Cerakote though. Which is more durable in my opinion.

[@mikewilliams1479]

@@igolf906 Okay. Think I wanna attempt it myself. Maybe I can make it look half decent.

[@callumcronin6761]

Quite interested to know what the feel is like with that epoxy face?

[@igolf906]

I've only taken a few putts with it because it's my brothers putter. He loves it. And the little I putt with it, it didn't feel bad. Would think it would be mushy but had a nice click off the face.

[@callumcronin6761]

@@igolf906 awesome thank you for sharing, I’m restoring an odyssey 2ball currently with the same face, so will try epoxy also.

[@derrickewing99]

Wow awesome

[@salongkim5988]

shrink tube diameter ?

[@shmirginhymer1867]

5/8". Make sure to get the 3:1 shrink ratio. I find they fit a lot better and there's much less change for wrinkles.

[@cycle2suffolk]

What is the wheel you are using? is it a stone of aluminium oxide?

[@igolf906]

Its a convolute wheel. They're essentiallly made of fibers, with resin bonded abrasives inside. Making it a softer, conforming wheel, that can still remove materials, and polish. Unlike hard stone wheels.

[@igolf906]

amzn.to/3B7xipd These are the exact ones I've been using. They work great and they're inexpensive.

[@slimrick]

show the sand blasting

[@igolf906]

I've been doing my sandblasting at my brother's house, so didn't really film any of it. All of my new videos will include the sandblasting as I finally setup my own cabinet.

[@jimmyj244820]

Amazing

[@salongkim5988]

What kind of epoxy ingredients should be prepared?

[@igolf906]

Standard 2 part epoxy and Jacqaurd Pearl Ex dye.

[@salongkim5988]

@@igolf906 I want to know the brand and details of the actual two-liquid epoxy and dye used in the video

[@igolf906]

www.jbweld.com/product/clearweld-pro-size www.jacquardproducts.com/pearl-ex

[@BJK13]

Very nice!

[@chrismota158]

I am doing the same thing to my scotty right now same exact black stainless patina. I first made sure to clean it thoroughly and I just used a plastic tray and put the putter head in there and let it sit. after awhile I took it out and dried it off with a towel... now it looks dull and blotchy any ideas why?

[@igolf906]

I coated it, and steel wooled it multiple times to get a nice even finish. It was dull also, I put a light coat of clear on this putter. I will slowly be moving into powdercoating but. This worked out ok.

[@phettaepolchantara8122]

@@igolf906 what do u use to wipe off the paint fill for powdercoated putter? i use acetone and the powdercoat came off also.

[@igolf906]

@@phettaepolchantara8122 I haven't yet trialed my powder coater yet on a putter, so I will have to get back to you about that. Thats a little disappointing that acetone took the powder coat off! 🤔

[@phettaepolchantara8122]

@@igolf906 ok. thank you

[@chrisdorgan8802]

Love these vids

[@igolf906]

Thank you!

[@KyleSchwanz]

Wow, you crushed it!!

[@igolf906]

Thank you!

[@Diggz11]

Looks great, how did it work on the greens?

[@igolf906]

I did this one for my brother. He's loving it so far! I made few putts with it at home before giving it to him and it actually felt pretty good!

[@erk1957]

Just watched your restoration of the odyssey putter I have one exactly like it what material did you use for the insert

[@shmirginhymer1867]

It's quick but it looks like he used a standard two part epoxy. Maybe JB Weld brand from the looks of it?

[@igolf906]

Yes, I used standard 2 part epoxy.

[@backwoods518]

clean!

[@igolf906]

Thank you!

[@patrickreinking2721]

What wheel did you use to remove dings and scratches?

[@igolf906]

They're called convolute wheels, or deburring wheels. I got them from SuperGrit and they're amazing!! 3M sells them but they're between $40 and $60 a piece. Mines a 6" and they're $15-$20 in all different grits.

[@patrickreinking2721]

@@igolf906 awesome thank you, what grits would you recommend?

[@igolf906]

@@patrickreinking2721 I have 100, 220, and 400. The 100 is very rough and does quick work, but I would suggest just using something around 200 to start. They have a 150 that I may try out also.

[@kje1414]

Amazing job, are you aware if you HAVE to sand blast? Specifically curious if you have to for the patina.

[@igolf906]

Thank you! Sandblasting opens up the metal better for that type of patina stain. Its not absolutely necessary, but since I have access, its the quickest way to get a good surface. But sanding by hand and getting it VERY clean is the most important.

[@kje1414]

Thanks for the response. I have my new insert coming from SpryEvo. Charles did say the removal is difficult and he typically drills out the faces until no material left.

[@mjac8373]

Nice!

[@igolf906]

Thanks!

[@OcRobb]

Dope!

[@igolf906]

Thanks!

[@rojalesgary7355]

Out of interest are you living in the UK???

[@igolf906]

Nope, I'm in the U.S.

[@rojalesgary7355]

@@igolf906 Damn it 🤬 I don’t think I’ll be asking for you to refurbish my Bettinardi putter!?!?! 🤔😳🙂

[@igolf906]

@@rojalesgary7355 Sorry, if it would make you feel any better I'm not really doing this work for people right now. Just for fun really. But would be interested to see pics of your Bettinardi?