iGolf906

Пікірлер

@hardyboysfishing 3 күн бұрын

What type of paint did use?

@igolf906 2 күн бұрын

Tamiya

@notto777 5 күн бұрын

"906" - Are you located in the U.P. ? I grew up there and visit every summer (live in Florida now)... from the Gwinn area. These restorations are great!

@igolf906 5 күн бұрын

Yes I am! Cool! Thanks!

@brianpetermeyer7462 5 күн бұрын

Incredible. Does the razor blade take out minor nicks and scratches? At what point do you use a buffer?

@igolf906 5 күн бұрын

Razer blade? I only used a razer blade to get the adhesive off the sole plate. Otherwise, I hand sanded the nicks out. This putter was in good shape, so didn't need to use the deburring wheel on it. I don't use a buffer for standard restores.

@brianpetermeyer7462 4 күн бұрын

@@igolf906 I didn’t realize it was sandpaper you were using. That’s what I get for fast forwarding!

@brianpetermeyer7462 5 күн бұрын

That is so sexy.

@daniellam3477 6 күн бұрын

How does this dude not have more subscribers???

@igolf906 5 күн бұрын

🤷‍♂️

@doranmaxwell1755 6 күн бұрын

yeah.. been doing some nickel plating myself. As you show, prep and polishing are the big deal. For steel it is pretty simple to copper plate then nickel over that. It is also easy to nickel over steel or existing nickel. Getting copper to plate over nickel tho? mostly it takes an 'activator' in my experiance... kinda just an acid that gives a little bite to plating. Stripping off all the old nickel works but that can be a real chore.

@igolf906 6 күн бұрын

Definitely is something that takes time and practice. I haven't tried plating anything since but I have tried stripping and nothing seems to be working properly 🤷‍♂️

@doranmaxwell1755 6 күн бұрын

@@igolf906 For a bad nickel job I did when I was learning I had plated an extra barrel for a 36 caliber cap and ball Colt clone. sooo... what I did was just sand and polish it out till it was smooth which of course did not get all the old nickel off but because the part was now highly polished I just ran it through the nickel again and it came out great. That is how I would have done your top break if you wanted a nice glossy finish which...you did not but.. that is the way I would do it. One very cool cordless tool I use a lot is a Ryobi hand held belt sander that takes one inch belts. sorta like a small chain saw but with belts instead of a chain... anyway you can get belts from 60 grit down to 1000 or maybe even finer. The rounded pulley part in the front is also good for some curved areas. It works particularly well on the octagon barrel flats. I use it a lot for all sorts of things. I actually do a lot of work right at my desk with cordless tools. Very handy

@tylergibbs8578 7 күн бұрын

What the blocks you prepped the wheel with do you have a link for that?

@igolf906 7 күн бұрын

amzn.to/3QkXHH1 amzn.to/3u0uyti

@beveridge1313 12 күн бұрын

very nioce

@J.C.LeatherCo. 12 күн бұрын

How much did this whole build cost if I may ask?

@igolf906 12 күн бұрын

I had the steel already, so not sure what it would be. Just had to get the hosel. Which was maybe $10-$20.

@AntonVanDerSar 13 күн бұрын

How does it sound with no padding btwn the face and the body???? Like an old PING? And what's the deal with making a Tiger replica then putting a cheap-o golf pride grip on it when you could get a PP58 for like $20? Why don't you like them? (...read that below)

@igolf906 13 күн бұрын

It's actually one of the better feeling Newports I've ever tried. It's GSS and the face is solid. As for the grips, it's just personal preference.

@AntonVanDerSar 13 күн бұрын

NOOOOOOOOOOOOO! You ruined it!!! It's supposed to have the black pearl finish. Now it has no finish at all. It looks like a lump of coal with Florida Gators colors on it lol. You put some chintzy grip on there when Cameron grips are like $50. Terrible. Just terrible. Would have been 10000x better to just leave it alone. [yes, I'm telling it like I see it. Yes, it's just my opinion. Yes, I have a Studio Design no. 5 that's in great condition and had a SD 1.5 stolen years ago so I'm allowed to opine lol. Yes, I keep it lubed with gun oil. Yes, it's the putter in my bag. Yes, I'm a golf nerd. And, for the record, I love your work, just having fun!]

@igolf906 13 күн бұрын

This putter was done exactly how the customer wanted. Grip and all. 🤷‍♂️

@ericgjerde686 14 күн бұрын

Never seen this putter before! Got to see it inside and out. I like looking under the hood and seeing how Scotty Cameron putters soften the impact behind the front plate.

@domeskeetz 16 күн бұрын

How long will that black last? Also do you do custom orders?

@igolf906 16 күн бұрын

I do yes. And cerakote is one of the most widely used coatings for putter Restorations and firearms, so it is extremely durable as long as it is not abused, and taken care of properly.

@domeskeetz 16 күн бұрын

@@igolf906 I currently have an old putter, a ping piper c Scottsdale edition. It has a black coating, with some red and white lettering as well. Does this sound like something you can restore? Should I message you on here or?

@igolf906 16 күн бұрын

@@domeskeetz Sure. Shoot me an email.

@arayner87 17 күн бұрын

Very nice brother. Just found the channel. Great work. I couldn't imagine the hours spent on this project! Cheers

@igolf906 16 күн бұрын

A ton actually. 😅 because I wanted to test out a much brighter bead blast finish. I remember hand sanding before blasting for 2 days haha.

@randyting 18 күн бұрын

What do you charge for a job like this. I have a putter same condition. Tks

@igolf906 18 күн бұрын

Shoot me an email.

@nnovillo 18 күн бұрын

This one is also amazing, thank you! I have exactly the same model, the insert is all rotten so I will be refilling it as you showed on your other video. I would like to know also how do you clean the paint surplus while painting the letters? Is the paint still wet and you clean it with a cloth? Or is it dry and you sand it? How did you logo in the grip? Mine is also in great shape and I would like to paint it in red, but I am not sure if you use the same painting and again, how do you clean the surplus off the borders... Thank you!

@igolf906 18 күн бұрын

The paintfill is applied, and let it dry. I then wipe with a cloth/paper towel and acetone. The paintfill in the grip is the same paint and method.

@nnovillo 18 күн бұрын

@@igolf906 Awesome, thank you!

@dennymade_ 19 күн бұрын

I’m trying to remove the X2 center shafted head. The shaft is just twisting but won’t pull off. Any suggestions?

@igolf906 19 күн бұрын

Keep pulling? Or slowly twist it off. There shouldn't be anything holding it back if it's spinning. I've never done THIS putter in center shaft. But I'm assuming it's an over post style shaft.

@nnovillo 19 күн бұрын

Beautiful, thank you? Could you specify the products and the amounts you use to produce the epoxy mixture? thank you!

@igolf906 19 күн бұрын

It was a simple two part epoxy mixed with powdered pigment.

@VictoriaNovilloSaravia 19 күн бұрын

@@igolf906 Isn't the curated final feel of the resine like glass? Shouldn't we add some rubber powder to make it a little flexible?

@igolf906 19 күн бұрын

@VictoriaNovilloSaravia No. It doesn't feel anything like glass. It's much softer than that. Almost like any other polymer or resin type insert.

@bobk.1428 20 күн бұрын

Awesome job except for the choice of grip

@igolf906 20 күн бұрын

I disagree. That's actually one of my favorite grips from GP, and it's extremely cheap.

@bobk.1428 20 күн бұрын

@@igolf906 you put a lot of time and work into that putter. In my opinion it needed a better grip to compliment your work. If you’re happy with it that’s all that really matters.

@bobk.1428 20 күн бұрын

@@igolf906 looks cheap too

@shmirginhymer1867 20 күн бұрын

@@bobk.1428That doesn't even make sense. He put the grip he wanted on it. Wtf does it matter to you? It also matches perfectly and looks great

@bobk.1428 19 күн бұрын

@@shmirginhymer1867 it doesn’t matter to me. Just expressing my opinion.

@hawblitzels 21 күн бұрын

We sent this putter to Corey. My wife found it in a garbage can at a garage sale. It was free! I think they were going to toss it. East Coast area with plenty of salt air and humidity. This thing looks even better in person. My 16 yo son is using it and loves it. Thanks so much!!

@igolf906 20 күн бұрын

Glad you love it!

@googleuser2607 21 күн бұрын

What is the black paint you use. will it scratch off

@igolf906 21 күн бұрын

It's Cerakote. It's extremely durable if taken care of.

@googleuser2607 21 күн бұрын

@@igolf906 I'll give it a try on my scotty as the black has started to silver from cleaning. expensive stuff though. £95 on Amazon

@igolf906 21 күн бұрын

@googleuser2607 Cerakote isn't just something you can throw on. It takes time and practice to get it right. Needs to be mixed, and sprayed from a certain size tip, and the gun needs to be setup properly. The part also needs to be blasted at a particular psi, and with a certain media, soaked, and bake the moisture out. Then after spraying, needs to be flashed, and baked at a certain temp and time. Otherwise, the quality and finish will not be correct. Just fyi.

@arthurmesa3320 22 күн бұрын

I need to send my Scotty Cameron putter to you. Amazing work. I’m dying for a replica Tiger Woods putter.

@igolf906 21 күн бұрын

Email me for info

@rrjones6667 23 күн бұрын

I have the exact same putter had it refinished a few months ago. I used white and lime green paint fill, may have to take it back for a new paint fill. The red white and blue looks great.

@jefferyzielke7665 24 күн бұрын

WOW! Absolutely gorgeous

@944own 24 күн бұрын

Would have been great if you showed the process of removing the insert. Nice work

@igolf906 24 күн бұрын

I have multiple showing the process. This one practically fell right out. It must have been worked on before because this style is usually pressed in.

@edwardlucksful 24 күн бұрын

Came across a beat up Scotty midslant recently, I decide to restore it. I just sanded out the imperfections (carefully) left the original milling and then polished it. Used nail polish to paint the lettering, it came out fantastic. Was well worth the effort.

@valderja 24 күн бұрын

Bloody lovely! The paint fill stages are almost like porn for me. Could you do some in slow mo next time?

@igolf906 24 күн бұрын

Haha. I'll figure something out

@Haydenwoodify 24 күн бұрын

Great work! Where do you find these dilapidated heads?

@igolf906 24 күн бұрын

Customer putters

@adamdillman486 24 күн бұрын

another great job! thanks for the email reply, keep up the good work

@ChristopherVass-pz2eb 24 күн бұрын

True Craftsman

@RowanClark-gr3cg 24 күн бұрын

Beautiful work 👍

@mpct5011 25 күн бұрын

What was the headweight before AND after the work?

@igolf906 24 күн бұрын

This was a customers putter, who wanted it exactly this way. Headweight wasn't an issue, so it wasn't weighed. A standard restore loses about 5 grams on average. I'd be willing to be it was close to factory

@HL_McCullough 25 күн бұрын

First off if you're the type of person who doesn't use a clubhead cover on your putter, give up the game of golf That's how you remove dings from all of your clubs 😂😂😂

@igolf906 25 күн бұрын

I agree...

@HL_McCullough 25 күн бұрын

@@igolf906 lmao

@kylemilligan5804 15 күн бұрын

Well since you clicked this video I think it's safe to assume that you also don't use clubhead covers so take your own advice and give your balls a tug Samantha

@randymayii1402 26 күн бұрын

What grit wheels do you use?

@igolf906 25 күн бұрын

240. Or just Fine for 3M wheels

@thekingofvirginia5014 26 күн бұрын

Rickie’s wasn’t a o works 😂

@igolf906 26 күн бұрын

Obviously.... I was just creating a replica.

@jonaspareja 26 күн бұрын

Love this!!! I hope you drop some 🐣🐣🐣 with it! Keeper or you selling it?

@igolf906 26 күн бұрын

This was a customer putter.

@xraiidanstar 26 күн бұрын

What size end mill for the cavity tour dot ? Thanks

@igolf906 26 күн бұрын

Not sure what Ohare uses, but I use 1/2". 3/8" is used I believe also just depends on the design your going for.

@davidspeers9833 27 күн бұрын

If u took it back to bare metal how would u stop it from rusting in future

@igolf906 27 күн бұрын

It's stainless steel.

@davidspeers9833 26 күн бұрын

@@igolf906ahhh I see because I reverbished a carbon steel one and it started to rust slightly so have to take it back to workshop and try to prevent the rust any tips

@igolf906 26 күн бұрын

If you're not coating raw carbon steel with something, then the only thing you can really do to slow down rust is a high polish. Maybe along side a torch and oil quench. But either way it's going to rust not be coated with anything.

@dannybrant6758 27 күн бұрын

Do you make money on these or are they just for your collection? Very very nice by the way.

@igolf906 27 күн бұрын

Most of these are customer putters.

@dannybrant6758 27 күн бұрын

@@igolf906 nice work.

@davidwangyy7831 27 күн бұрын

Hi I am David from Beijing China, I really like your videos, thanks for sharing it

@adamdillman486 27 күн бұрын

another great job! I'll shoot ya a pic of the stainless i did not long ago, thought it turned out pretty good. would love to see what you think? keep em coming, I get alot of ideas watching your vids