OFF In 20 Seconds! | JD Customs USA Front Bumper Quick Release Kit For Evo 9 & Evo 8 | How To

[@jasongt5433]

3/4” spade bit works best

[@MiguelDsm]

I always wondered what they would look like color matched 🧐 you can barely tell!

[@Genevo9]

Thank you bro! Yeah gonna have the body shop color match when I get my bumper re sprayed 😅

[@littletophersmith3625]

Damn that hurt a little when you were drilling into the bumper lol. Looks awesome though👍.

[@Genevo9]

Thank you bro! Yes it hurt a little for sure, but it’s a great tiny mod for sure!

[@andrepauli3143]

Nice little DIY project there Genesis. Measure twice, cut once...I love it, good stuff. I will check out your merch too and pick me up some cool swag. Happy New Year brother!

[@Genevo9]

Thank you so much for the love my friend! Means a lot! Happy New Year Brotha!

[@dinokadribasic9192]

Not gonna lie I was pissed when I saw the title of the video but my mind changed when I saw how clean it’s looks because its colored match. Very nice detail!👌

[@Genevo9]

Thank you for the change of heart my friend 🙏🏽😊 I was scared to do it at first but I ended up liking it, if I didn’t I was going to the body shop to get it filled haha. Thank you for tuning in!

[@lzeel-jg3hn]

Can't even tell where the buttons are unless your close up 👌 great vid 👍

[@Genevo9]

Thank you so much Zee! I’m going to get it colored match with my paint. Have a great new year!

[@DiggerNik]

What about the middle bolts. Shouldnt they be holding the bumper too?

[@mrdavidwest10]

does the evo 9 have the intercooler spray button? if so don't forget to reattach the water spray tube/piping (like i did on my evo 7) before you put the bumper back on.

[@TonyTurboRST]

What are you doing to make your splash guard fixings and top part of the bumper quick release?

[@Genevo9]

To be honest I only have one plastic river on the splash guard and 2 10mm bolts on each side of the top part of the bumper, you really don’t even need those 2 10mm to be honest

[@TonyTurboRST]

I used 1/4 turn quick release fasteners on my splash guards. If you don’t fix them properly the wind while driving will push them into the tyre, and the tyre will eat them. As I found out. I use 4 x M6 bolts on the top of the bumper for now. Keep up the good work, I enjoy your videos :)

[@user-vx9uo8xg6m]

Did you need to remove the plastic bits on the fenders to get it to sit flush or can I leave those?

[@Genevo9]

You can leave those bro. No need to remove anything, just the bumper to make it easy access.

[@vOpTiOnZ]

Great video! For sure going to buy! Question tho, do you ever put on or remove the two bolts by the in cooler? The ones that are behind the little circle covers? Everytime I take my bumper off I always lose and drop those bolts it’s a pain. Do I even need them?

[@Genevo9]

Thank you so much bro! To be hones bro I forgot about those! You dont really need them IMHO, but it wont hurt to install them for extra support, but the quick release and two 10mm at the top should suffice. Thank you again for tuning bro!

[@akositomgutom5222]

Nice bro!!! You did it!!! It still looks clean!!! And functional! See you next year!!!

[@Genevo9]

Haha thanks broSki! Happy new year bro!

[@muhdsyakir5401]

do they have for the top bolts just like the side bolts?

[@Genevo9]

Hi bro, unfortunately no. The top bolts are still the old 10mm.

[@Gattsu1986]

Hey dude, does your bumper line up flush with just the quick release buttons or do you have to use the other fixings at the top? Thanks man

[@Genevo9]

Lines up well 👍🏽😊

[@AlohaStateofMind]

Whoa... didn’t know you had a YT channel. Dope stuff bro!

[@Genevo9]

Thank you bro! Yes I’m a KZbinr since last year haha . Thank you for tuning in bro and the support! 🙏🏽😊. New videos weekly!

[@BlackBeautyG37SCoupe]

As always , great looking evo bro.

[@Genevo9]

Thank you so much bro! and thank you for tuning and your support! Happy New Year!

[@turdferguson1021]

And the bottom? You saying that your whole front bumper cover is held on by to quik connects?

[@tgkg]

Did you remove the under splash guard on your evo?

[@Genevo9]

Hi bro! No I kept them, engine bay will get dirty without them

[@markjimenez6351]

Made it look so easy, thanks bro might run this in the future

[@Genevo9]

It’s a great little mod that I was hesitant at first but super glad I went through with it, plus if i change my mind in the future I can have it filled by the body shop later.

[@ValkyrieLightwing]

Gonna be honest it hurt seeing the bumper be drilled into, but honestly I think it was worth it, or will be. Will be a huge time saver, and time is money. And, it looks actually a lot cleaner than I expected it to, you can barely see them.

[@Genevo9]

Thank you sooo much for the love and support! I will be color Matching the buttons when I take the bumper in to get the license plate holes filled and repainted! Thank you again for tuning in! Have Happy New Year Bro!

[@Dustin_LA]

Sold! Thanks for the video. Appreciate ya

[@emilewallace8074]

you really deserve more subs

[@Genevo9]

Thank you so much bro! Please spread the word on my channel 🙏🏽😊

[@tonychristensen6714]

Hey bro , do you ever have any trouble when putting the bumper back on with the gap under the headlight not being right? I Tried to get mine right but it won't lign up very well ,pne side will be perfect but the other side a bigger gap under the headlight , is there a trick to it ?

[@strizi83]

Dope Video as always Bro!

[@Genevo9]

Thank you sooo much! 🙏🏽😊

[@jasonmane8847]

I have these as well , good job 👍

[@Genevo9]

Thank you! Did you color match bro?

[@jasonmane8847]

Genevo9 no I did black on apex silver because all my accents are black

[@davidperez4028]

I'm late this time but shes looking good man 🥰

[@Genevo9]

Thank you so much! Have a great new year!

[@emolutioning]

U cant Quick release the bumper if u have got the OEM stock protective undertray which is secured with 12 clips to the bumper lower lip isnt it? 9 year evo9 owner

[@Genevo9]

I just secured the front half for the undertray connected for to the front bumper with 2 clips which is connected to the tab so I can easily access and remove it Brotha. No issues so far 👍🏽😊

[@emolutioning]

Nope in your vid there is no plastic oem undertray. this undertray is connected with 12 or more clips to the front bumper and then maybe around 4 more clips secured to the chassis more rear to the bumper.

[@Kimballliin]

EMOLUTION9 SG yea looks like maybe the previous owner took it off. That under tray can be a pain when doing maintenance.

[@TFritz82]

@@emolutioning yep, I've learned to live with all the fasteners and refuse to ditch that under tray. It's an aero item and helps keep the bay cleaner 🤙

[@CulturePuncture]

You doubled your subs since the last time I checked you

[@Genevo9]

Thank you bro🙏🏽 I hope you have a great new year!

[@JonArevalo]

Clean!

[@Genevo9]

Thank you bro!

[@MrShadyss]

Always thought the “gen” stood for generation 9 of the Evo lol

[@Genevo9]

😂 that works too!

[@عبدالرؤفالمغربي]

❤❤

[@Genevo9]

Thank you!

[@hollywood4n6]

What’s the purpose of the gloves? youre not using paint, grease or oil so.... it’s pretty pointless.

[@hollywood4n6]

So knock off Quik•Latch and you still didn’t put on the bumper fully to get an accurate time. I run Quik-Latch hood pins, front and rear bumper releases and interior upgrades including amp rack in my FD. It takes 2min 5sec to completely pull off my front bumper from 7min 48sec originally. qL is rated at 150lbs break point and it’s about $10 cheaper than this.

[@AndyZULUL]

@@hollywood4n6 homie, who tf asked

[@LP-bt4jk]

@@hollywood4n6 because of Covid protocols

[@hollywood4n6]

@@AndyZULUL and you’re being a dick because?