Official Do's and Don'ts of Plasti Dipping Your Wheels

[@volpswagen_marco]

And this ladies and gentlemen is the classy way of showing the capabilities of a product. No need to bash other products.

[@cullenschwagler1341]

Another great way to mask off the tires(if you don't have the dip release) ive done many times in the past whether it was plasti dip or spray painting wheels. Take 2 decks (I believe you need 2) of playing cards and stick them in between the very edge/lip of the rim and tire then overlap the cards around the entire wheel. It greatly reduces overspray on the tires while you spray paint the wheels.

[@bri-manhunter2654]

Cullen Schwagler. I’ll try it out tommorow!!

[@guildensteinfoutch6232]

Use index cards they are super cheap and u dont ruin playing cards.. lol

[@Bvsterrrrrrrrr]

@@guildensteinfoutch6232 playing cards are free at the casino. And 99cents at a dollar store.

[@guildensteinfoutch6232]

@@Bvsterrrrrrrrr ah really didn’t think they was that cheap. But still index cards are better they’re bigger and you use less of them for the same thing and less chance of over spray . It’s just the way I’ve always done it.

[@Bvsterrrrrrrrr]

@@guildensteinfoutch6232 totally agree

[@smoove1011]

step 76: biceps

[@LorencRaci]

Another good tip I learned is after a few solid coats, move the car forwards or backwards to achieve a 180degree rotation on the wheels. After that, coat the wheels another 2 or 3 times for maximum coverage.

[@TrieuNguyen-im2jm]

this dude is hardcore,,he dipped his whole garage walls

[@cjthagod1959]

Hahah

[@jordangalvan369]

The while garage hahaha im dead 💀 🤣

[@taylorkeyes9650]

Golden

[@Supernaut413]

Its easy the get carried away

[@bustabeans7917]

I dipped my sack and now it's twice as durable. Thanks plasti dip

[@shad3128]

This is really helpful. Idk why so many people hate on dipping the wheels. When you do it right like you emphasize, it saves hundreds and even thousands depending on the wheels you have if you get then powder coated

[@DasGrinch]

The warm water tip is something I wish I had when I did my first wheel dip, it makes a world of difference, especially in December in Ohio, even in the garage. It goes from a splatter-finish spray into something that behaves a lot like regular spraypaint.

[@kevincharliefoxtrot9792]

The best I’ve seen regarding the prep. However, what about the lug nuts? Mask em? How well will a socket fit over several layers of coating? Thanks again.

[@Nivlaceel78]

i wouldn't be concerned with fit as much as the dip coming off whenever you go to take the wheel off. Or put the wheel back on for that matter if you took it off to apply the dip

[@ilandman4evr]

Thanks for taking the time to cover these tips. It means a lot to the diy minded person. Great vid Cheers

[@stevenjacobs6934]

I dipped my C6 Corvette wheels, i removed the wheels, cleaned and sprayed the huge barrels also...then painted the lugs seperately with Rust-Oleum. Turned out amazing and if i ever want to reverse the results just peel it off, i did 7 nice thick coats, almost a can and a half per wheel.

[@vavoo4971]

PSA about leaving wheels on the car or not: I decided to dip the wheels on my white Elise a nice matte black. As it's quick and easy for me to remove the wheels, I took them off for easier cleaning and access for spraying. Here's the problem: the space around the bolts is so tight that while putting the dipped wheels back on the car, the wrench touched the dip just enough to turn and tear it off. All the work was for nothing and I had to remove all of the beautiful fresh dip. If your wheels are designed in a way that there's not much space around the bolts and there's a risk of touching the dip while wrenching them back in, do NOT remove your wheels for dipping. I hope this will save somebody the trouble I went through.

[@titovelez98]

Vahid Saberin you could mask off the bolt holes

[@dirtrider88]

just use a micro fiber towel. over spray comes off of paint so fuckin easy.

[@Redbanano]

Thanks for the tip! I might dip my wheels and this tip just saved me from making a mistake ike that

[@poopipeboy3033]

Man you helped stop my life from being ruined because I would've done exactly that. Not only that, the plasti-dip gear would've cost me almost as much as a new set of rims, so I may as well just buy another set of rims in the color I want.

[@a.s.4914]

@@poopipeboy3033 im thinking of painting mine instead. One flat, or when it's tire rotation time, and this stuff is toast.

[@vladstr100]

I wish I had this video when I plastidipped my wheels. The tip about not laying the wheels flat would have been incredibly helpful in not getting a textured look on some of the parts of the wheel.

[@eliteshots7389]

vladstr100 If you plasti dipped them just peel the paint off and do it again.

[@alecsanderfuentes3913]

vladstr100 just re do it

[@hello-ef4bn]

lol yall saying just redo it a set of 5 cans is around 100 bucks

[@vladstr100]

@@hello-ef4bn Yeah, I definitely didn't have the funds for that to redo it. I just left it be but now after having the tires replaced a few times, the plastidip is lifted and the underneath is rusty, so it'd be more of a pain to redo it.

[@MrKhurramshahzaeb]

This guy is so legit. Refreshing to seeing good people doing good and informative no bs videos.

[@CyberLord5G]

What a good business Man.

[@asiancop]

Man, it seems like such a simple thing but I have always messed up spray painting things. Your tips on how to actually paint with the light layer and then heavy coats is great, thanks for this video.

[@Droopy578]

Really informative Fonzi, thanks and hope it's helps everyone out

[@taradead]

Fonzi, lol

[@AB-bm4xk]

wow, the camera clarity and audio have come A LONG way, since you first started doing these videos. Awesome step by step on how to do it right.

[@CVJordan]

I learned the hard way that warming the cans up before spraying is essential when you live in New England. Cans went from spraying thick chunks of goo to spraying a very fine mist. Good thing it was peelable!

[@s.flanders]

When I dipped my wheels a few weeks ago, I found it really difficult to get even decent coverage on all surfaces without moving the car to turn the wheels. After moving it, I was amazed how little coverage some parts of the spokes had, even though I tried to cover them with the first few coats. Admittedly, the can is much more likely to spray huge particles of product if you're using it at an aggressive angle, which is the only way to get good coverage on all surfaces during the early coats.

[@dipyourcar]

Depending on the style and design of the wheel - it's going to be necessary to rotate the wheel half way through the coats. We cover this in the Complete Guide video. There's no way you can hit every spoke properly without rotation.

[@MrRangerZr1]

Dipyourcar shows that in another video. They said to move the car half way through the job so the bottom spokes are exposed. Just be careful not to jam the plastic bag into your brakes.

[@s.flanders]

MrRangerZr1 I did watch the complete guide and knew I'd have to move the car. I just wish I had moved it earlier and more often, actually, not just once mid-way through the process. You also make a good point about the bags. The space between my caliper and the wheels is so small that the bags were essentially jammed between them, which messed things up a bit both when moving the car and removing the bags. In any case, I have useful experience for next time, and I do plan to redo my wheels soon.

[@silentassasin741]

Stupid Flanders just take your wheels off. It’s much easier.

[@John-gi3es]

Yes

[@Airbunnie11]

What did you do to avoid dipping the M and BMW badges? It didn't look like you taped them at all and just sprayed over them?

[@BLACKOIL99]

That color is pure fire.

[@dyccustomerservice1964]

100% accurate

[@kellerb1717]

I bought this product from Fonzi a few years ago. I must say it worked great and was easy. I used for about 6 months then bought new rims. The product still looked good just wanted dif rims. It was also fun and way dif then painting.

[@mindofmyown333]

Really happy I found this video! I’m dipping wheels tomorrow and was planning on laying them flat down but now I know better

[@DukeDennisLive001]

How’d it go

[@mindofmyown333]

AB Khan great! I followed this tutorial to the letter after purchasing their dip kit and I’ve now had my wheels dipped since I made this comment last year. I had no runs in the dip and they have held up really well. No pick spots, or worn spots in the dip on the wheels at all.

[@SynoAuRi]

@@mindofmyown333 they still holding up?

[@mindofmyown333]

@@SynoAuRi yea man! They still are holding up perfectly. Still no tears or pick spots in them or anything

[@SynoAuRi]

@@mindofmyown333 that's awesome dude 🤩 thanks for updating

[@richpal3019]

I think I'll try it on my spare first.

[@haxxorsheep]

I have dipped a few cars wheels in my time and KY works best on tires.

[@xinnytan9899]

KY in place of dip release?

[@alexstaun7996]

You should start a fitness channel too, I’m trying to get biceps like that 😂

[@amberrenee4268]

How would you recommend fixing tears on the lug nuts from taking the wheels off?

[@ennise25]

use a stencil or sharp tool and cut out the area of Plastidip where the lug sits to that it will not twist and pull the rest of material from the surrounding area.

[@da324]

@@ennise25 He said fix tears, not prevent tears...

[@-D-W]

I used the Anthracite Grey for my winter rims. I sprayed my rims prior to the tires being installed on the rims. I knew that as soon as the impact gun came into contact with the lug nuts, it would immediately ruin/tear the Plasti-Dip from the chrome nuts. Thus, I went out and purchased some black lug nuts instead. For myself, I think the black lug nuts look absolutely awesome set into the Anthracite Grey rims!!

[@honoredsage4946]

D* W* usually the black is just coated on the lug nuts , did the black stay on the lug nuts that you bought? Or did it get scratched or worn off?

[@-D-W]

@@honoredsage4946 Yes, the black was just coated on the lug nuts that I purchased. The first winter changeover, my mechanic got the tires mounted without scratching up the coating on the lug nuts too much. But after the changeover back to summers, then again to winters, the coating on the lug nuts were at the point that - with winter salt and elements taking their toll - they were all rusted up by the end of the 2nd winter. But, for myself, to have the look of the black lug nuts set into the dark grey rims, I will gladly shell out $50 (Canadian) every two years to replace the nuts with new ones.

[@claudet8706]

Followed all your instructions that you outlined in the video and got great results. THANK-YOU!!

[@bbeal2325]

Why is this frowned upon this is awesome easy and pain free I’m going to order mine soon

[@JamieBainbridge]

Haters are just dumb and will bash anything they can. The great result in heaps of high-res closeup videos on this channel speak for themselves 😎👌

[@xieyi3018]

How long do I need to wait for each coat?

[@trhenryvlogs9638]

20-30 minutes to be safe.

[@TRUE_GR1T]

One of the caps got clogged while I was using it, luckily I had a bunch of graffiti caps so I finished the job with a NYC fat cap

[@SirenOneMusic]

I bet you covered the whole rim in 2 sprays. Them NY fats ain’t no joke🤣

[@crod6431]

I like this technique instead of removing each tire and laying it flat. I would've covered the tires and car panels. Other than that, it looks great. Also, I prefer a gloss black color.

[@2purdy319]

I wish you would have showed how you completed the job around the emblem

[@dragorx000]

Well he sprayed them in the video so I’m assuming at some point he used the dip release on the emblem without showing it in the video.

[@kevinarnold7065]

It'll break off at the seam, plasti dip pulls apart cleanly at any sharp angle as long as you're pulling away slowly and not peeling away.

[@Jay-hp6pu]

@@dragorx000 You can assume all you want but people want to see the process. That’s the point of the video.

[@GenevieveBonjour]

I’m about to plasty dip my TESLA Model Y wheels and I’m SO glad I watched your video. The other videos I’ve watched of owners doing their Tesla Wheels obviously did not watch your video first lol. Great video: to the point, your voice is very pleasant to listen to and you’re a cutie pie. Cheers!

[@thomasmarshall4472]

2 Quick Questions: 1. What happens when someone takes the lugnuts off---Does it start an ugly uneven peeling that makes the nuts look half/silver half/black? Those impact wrenches are brutal. 2. Do you always spray over the center cap and then peel it off, or remove center cap first? Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@santan546]

What about around the emblem? The huge BMW circle in the middle ? Sprayed over it// but never took time to show us how to remove it - or any type of technique to remove that. - honestly - that was one of the things I was waiting to see -- after watching him spray totally over the emblems. :(. ?

[@louiville3091]

Your making a killing of plasti dip congrats I’m a regular car painter lol

[@ldontcomment]

Hello, your video was very helpful but I have one question. In your final product the BMW emblems weren't plasti dipped, how did you remove the plasti dip around the emblems? Thank you

[@ryanb1818]

Really Fonzi, you're going to release this a day after I did my wheels. I'm 3 hits in on things I f*cked up on lol

[@phorenzic_]

what were the first 2

[@thethree60five]

Nice form with the spray can, like a real paint gun. Move-press to spray-stop spray- stop moving. In that order. It will stop build up at the start or finish and give an even coat. This was the 5 video I watched and all of the others laid the wheels down and or didn't have the proper spray technique. Awesome lesson and tips!

[@alanvaladez6535]

Can't wait to plasti dip my bmw! The red rum video got me totally in ! Great tutorials

[@GeneralIzod355ml]

Can’t find one video of the wheel off application, I want to do it wheel off

[@ayeshasabir1242]

He is fine!!! I just need to retouch my wheels but I’m going to do it myself, it was way too expensive to have it done!!

[@victory065]

How does this product hold up when changing tires out?

[@midwestmotorin]

it's gonna peel off due the the process required for mounting and dismounting. While factory painted finishes go unharmed, the dip will start to peel and get damaged which is basically unavoidable.

[@-D-W]

I used this same color (Anthracite Grey) on my winter rims. I have gone through 4 winters now of swapping them out and the Plasti-Dip looks just as great as when I initially did it. The only problem area was the lug nuts. The dip peeled off the chrome lug nuts on the first rims changeover. To rectify this problem, I purchased black lug nuts instead. The black lug nuts added a super nice contrast to the Anthracite Grey rims!!

[@jakehiggins5118]

Would tire shine be an effective way of protecting the tires from overspray?

[@raomar0]

Yeah same as dip release just use tyre shine and then after spraying peel off the tire

[@arlequin241]

What did you do with the center cap? Did you just peel it off?

[@entegar3]

True...I guess that it mite as easy as he did with on the tires... Id cover it anyhow

[@arlequin241]

@entegar3 yea, I'm only asking because I want to keep my branded center cap, but I can't seem to find a video that doesn't spray over it. This video was the exception, but it's been edited out for some reason. I guess I'll try masking it before I paint.

[@entegar3]

@@arlequin241 better safe indeed

[@DJ_PhoenixRising]

When you need to take off your wheels and rotate your tires I imagine that the coating will come off around the lugnuts and perhaps get scuffed in some spots. Is it easy to touch up without it looking like it's been touched up, or do you really need to take it all off and redo the entire wheel

[@trentchew1033]

I have 2 questions in regards to dipping wheels while still on the vehicle? 1. What do you do about over spary on the car? 2. If you dip rims while still on the vehicle the lug nuts will be covered in dip, will removing the wheels ruin the dip on the rims?

[@jhawk1977]

How well do the lug nuts hold up when you take the car to get the tires rotated? What about when you need new tires and the wheels have to be removed from the tires and balanced, etc...Do I have to do the whole process over again?

[@robncasey1216]

I’ve got a 2008 Dodge magnum that’s a dark charcoal grey. I’m about to order the gloss white for my mags!! I’m super excited!!!

[@Amythrash10]

What do you do about the lugs?

[@mborromeo2618]

With all the LUG NUT questions,you an buy black lug nuts cheaply online.Great video but I would also cover your nice car to avoid overspray.

[@davieboy1970]

I have watched several videos and not one of them have said how long you should wait before each coat..

[@PrimalLiger]

Well i study auto body repair and usually when we spray we wait around 15 through 30 minutes between coat

[@alecsanderfuentes3913]

davieboy1970 just wait till dry or 30 minutes jeez man

[@da324]

There's a section on the product called directions; it's very useful!

[@honoredsage4946]

Yeah definitely says it on the can

[@dudleydooright]

I wish I could still sit on my feet like that. Those limber years are long gone.

[@rashidbelk2595]

what about the BMW sign on the wheel? i noticed it was black but changed to the normal color however he didn't show how he took the paint off the BMW sign part of the wheel.

[@bzorro1]

I'm wondering the same thing

[@slow_rednline4874]

He peeled it off

[@danc1197]

The cap is plastic, plasti dip only sticks to the rim. It will easily wipe off of plastic parts.

[@jeremeyandrews1138]

Dan C not true. It sticks to everything. He simply pealed it off the cap. When 2 surfaces meet, most of the time there is a gap and when you spray it doesn’t bridge over. Making it simple to peal it off the desired spot.

[@alecsanderfuentes3913]

Dan C plasti dip does stick to plastic I’m more than sure he added drip release

[@DaveSchnare]

Take the wheels off so you do not do the lug nuts and the center cap. I removed my wheels....that way I could remove the center cap. And more importantly if you have to take the wheels for any reason you won't rip the dip when you in bolt the wheel.

[@appalachhaun_adventures]

What about NOT dipping the lug nuts and also when you have to rotate the tires?? Does it mess up the plasti dip?

[@ocdetails]

My advice would be to remove the wheels. And while your wheels are off, do yourself a favor and paint your crust calipers. No sense in having a sharp looking car and wheels and then show off rusty calipers. I just paint mine black. No need to accentuate stock calipers. Red also gets dirty and gunky pretty fast, so black is the easiest color to maintain. Plenty of videos out there on how to do it. Plus you won't get overspray all over your car. Don't think for a second that it only gets on the sidewalls. The things you are wearing a respirator to protect your lungs from is also floating around and landing on your car. I take the wheels off in the drive way and paint them in the garage. Either way you do it, this is a great video on how to use the product. Seriously, man... You do have the best how to videos on KZbin. Keep it up!

[@matthewalston1226]

Getting kinda bossy there Fonzarelli😁

[@joshr19821]

Thank you I am just gonna use trash bags and put 5-6 coats on per wheel. Also not to take people away from you dip product, bc it does seem to work great on the tires but any type of good tire shine will do the same

[@jrb982]

I'm going to do this with the wheels off the car. Any suggestions for masking off the lug holes, wheel center bore, and the valve stem, so the dip doesn't peel when getting new tires or changing a flat?

[@Andrew-zt3bf]

Stuff it with plastic bag/shop towel

[@MasterShake300]

I bought a kit 5 years ago.. I'm about to finally use it on my new (to me) 3rd gen Mazda 3 hatch! Wish me luck!

[@dallaslegend9460]

How it go

[@MasterShake300]

@@dallaslegend9460 pretty well actually. The biggest time sink was prepping the wheels. I didn't get the dip release so I taped the tires. The other odd thing was when I got to the last 3rd of the can it was coming out in large chunks. Not sure if that's because it was 5 years old or if the can's temp got to low. I did put them in hot water before starting.

[@MajorCordite]

Dumb question(s) What happens when I get my tires rotated every 5,000 miles? Will the recessed area around the lug nuts be all scuffed up when the socket wrench is applied? When this is done the balancing weights are most always moved around, so how do you retouch?

[@socrateszayas6298]

What best way to fix rips on lugs when changing or rotating wheels?

[@adampennington8954]

Did this dude just say "you get a brake-masking bag for each wheel"? hahahahaha

[@San-jose-Ruussh]

love this plasti-dip made my car look 10x better.....i just forgot to rotate my tires so didnt cover 100% well lol

[@garyshimer9725]

Great video. Only question I have is about the lug nuts. After plati dipping as shown can you still get a socket on them? As it seems coating them would change the MM size. Is there any problems with that?

[@Bananovskyyy]

the dip will rip off the first time you put a socket on them

[@JeZuS19B6]

What about the bolts when u take off the rim will it tare the rest off with it?

[@maxnuccio2440]

What happens if it gets on car body paint? Also will it peel when you get tires changed?

[@daddyo824]

Overspray rubs off easily. Yes.

[@midwestmotorin]

Should have mentioned this should be done with newer tires on the wheels. The dip will peel and get damaged with tire dismounting and mounting. Don't get mad at a tire shop about it because it's basically guaranteed to happen.

[@Craftsmansteve]

That came out really good I love that color

[@toycarcollector]

These wheel look super nice. I gotta try this but first new tires. Pretty sure tire mounting would ruin the finish.

[@olayinkabalogun8244]

Fozi, I thought you had move the car forward a bit to get access to the blind spot which you couldn't see normally?

[@willoguy11111]

How durable is it on lug nuts?

[@nathanz1982]

Ok, what about the lug nuts? Your gong to have to take the tire off at some point.

[@da324]

That's why I took my tires off. I left the chrome lug nuts and dipped the rims. The chrome looks very nice to counter the black and it should minimize/eliminate damage if I have to take the tire off.

[@-D-W]

I used the Anthracite Grey on my winter rims. I knew that any plasti-dip on the lug nuts would be ruined as soon as the impact gun hit them. So I purchased a set of black lug nuts. Personally, I think that black lug nuts look frickin' sweet set into the Anthracite Grey rims!!

[@JamesExcell-InterJex]

How did you get the Plasti Dip off of the BMW emblem, along with an M emblem, on the rim?

[@xerotao]

Get a toothpick and pick at it before it cures

[@MAYBE12FLY]

use the diprelease on the eblem

[@allmotordc5rallmotorfa575]

waterside 😂😂😂

[@ChrisDan94_]

Tape or use a toothpick the minute you finish.

[@rrenegadoo]

waterside .... nooooo.... don't use your brain will be to messy, better use a toothpick..... 😁😋😜

[@iviaverick52]

Can you use plasti-dip on bare metal rims (potentially with pitting), or do the wheels have to have an existing undercoat?

[@chickenguru4]

Looks great with great tips. Anyone notice the kumos and Continental tires at the shots outside. The car looks great

[@bigmustache9057]

after you dip over lugnuts... next time you take those off... what's gonna happen?

[@georgestanley9140]

Don't dip your lug nuts, mask then with painters tape.

[@SladesVWBeetle]

I dipped my wheels, but when remounting then on the car something made me nervous! I’m tightening my lugnuts against rubber instead of the aluminum wheel. Feels strange doing that! And the torque won’t be proper?

[@claytonkohar2219]

How much time between coats.

[@eddie-g2143]

10-15 minutes....and the can must be kept warm during dipping......

[@CHB_98]

so happens when you take off a lug nut ? does it peel off how about surface prep if your rims have flaking or pitting will the dip cover all this ? or is there a step i need to do first ty

[@tonydido7804]

when you watch through the entire video because you enjoy the music during the walkaround ;) especially at 12:05 lol

[@ants3034]

i do the same lol

[@c7uk]

I’m in my garage now 😬 First attempt - wish me luck!!

[@sweetjonesjr3638]

C7TV gl bro 🙏😂

[@UjjalVallabh]

I just did mine today and it looks amazing! Easy peasy! Thanks for the tips!

[@torrieturpin3209]

Hi Ujjal How cans did you have to use and how many times did spray each wheel and when do you add gloss

[@josephmalinowski6817]

I believe there's a commercial by Summit Racing and they talk about products they sell from Bond to paint and they say that 90% is prepping your car correct 10% is painting it I don't know if those percentages are correct but that's what comes from the commercial

[@TriforceSamurai]

I was wondering if there was a way to have a deep black finish with a colored sheen to it? Like it's black but when the sunlight hits the car at a certain angle you can get a colored reflection. Would a colored juice in the clear coat on a black dip have that effect our would it have to be a very fine flake in the clear coat? I'm hoping for a black car with a purple shift, I guess.

[@jessicaroman236]

Hi. Did you ever find out the answer to your question? I want something similar and was wondering the same.

[@insaini87]

Obsidian black changes colour in light

[@Stropeedo]

There is the chameleon paint as well you could do a coat on top of the black it may work

[@sylwiagallo]

You are an advocate for "Dip your car" products. What about the lugs and emblem in the center ? It would be so much easier to just remove the wheels one by one. Don't you Think ? Don't get me wrong the product is seems extraordinary !!

[@falconeye577]

WOOOOOW Who does NOT have the tools to remove the Wheels from the Car? Every car/truck SHOULD have a Jack and Breaker Bar for Changing the Tires should you get a Flat No One should every say they can't do this, if they do THEY SHOULD NOT BE DRIVING I can not wait to do my truck

[@nleli8387]

Today was my first time Plasti Dipping my rims and after watching this video and doing it I feel like a pro 😂😂

[@dezzymeriei]

Hey fonzie!

[@dipyourcar]

Dezzydaze hey!

[@getrekt9999]

I definitely thought I was done after two cans.... couldn’t peel parts off afterwards! Won’t make that mistake again

[@jonvincentmusic]

Imagine not having the means or the tools to remove the wheels from a car at least one at a time. Where's it all gone wrong? It doesn't seem that long ago where EVERY CAR came with a jack, and a wheel brace and a spare wheel.

[@jonvincentmusic]

Fact is, lots of cars made in the last ten years don't even come with a spare wheel, so many owners these days haven't a clue how to remove a wheel. They see it as a garage job.

[@j_valentin13]

Run flats man. I just got my bimmer, but I’m still thinking of investing in a spare and a jack because although they say run flats will run for 100 miles, one can never be too sure. I completely agree, these new advances sometimes just eat at our basic skills.

[@Vykk_Draygo]

As much as I like spares, I understand having fix-a-flat kits on small sporty cars. Not much room in the trunk for a spare on my little Fiat 124 Spider. But yeah. I was like... who doesn't have the tools to do this? Then I realized he was right. Mind blown.

[@theoracle1945]

Removing wheels is simple. Putting them back on without properly torquing them is not

[@Jmonty580]

what if you don't have a flat safe surface to remove one wheel at a time?

[@scottcruse1567]

Hey quick question... I dipped my wheels but when I installed them back on my truck a couple of the lugnuts caught the plasti dip and started peeling it up. Can I patch it or do I have to start over? Thanks

[@nickbanks1034]

Wait so one can per wheel? Or no?

[@dipyourcar]

One can per wheel for a standard color like Black, Anthracite (used in this video), etc. There are color however that require a topcoat like gloss or pearl. Once you go to a wheel larger than 20", more than one can per wheel may be necessary.

[@eddie-g2143]

@@dipyourcar will it be enough for an 18" wheel?????i bought four cans of black,but....how many coats can be spreaded on the wheel with one can?????

[@MrRyanAlmighty]

Love your channel..looking to dip my wheels soon and this kit would be amazing. Also at the fraction of the cost it would to buy everything individually

[@Evanamartin]

Do you need to put on the Metalizer at the end? I love the look of the matte black

[@robert23396]

i just love that green M3

[@GlasgowBandit]

I'm going to be dipping in about an hour's time , and yea I mean my wife 😉

[@naaaron7378]

😂😂😂

[@Itaintyouitsme]

Great video. The owner has Kumhos tires on the front and Contenials on the back.