How to install s550 Mustang MASSIVE Flame kit (Hotlicks) Wiring simple!

[@sinformant]

Just some words of advice from someone who built their own flame thrower kit years ago when i was in highschool( video on my channel) the spark plugs need to be placed in the pipes coming out of the muffler right before the tips. Placing them in the muffler like that wont work. You are just igniting the unburnt fuel inside the muffler cavity which at best at night you will get a backfire type flame out of the tips, not an actual sustainable flame. The reason your car keeps going into limp mode is because the ecm is registering missfires from when the coils are losing energy and the spark plugs in your engine arent firing. Newer cars will trigger limp mode anytime it senses the lack of an explosion in the cylinder whether it be a failed ignition from spark, or fuel injector not putting enough fuel in. Also if you have cats they will greatly reduce any unburnt fuel from reaching the rest of the exhaust to ignite and can melt your cats from all the excess unburnt fuel building up in them. Any questions you can respond to this comment. Just here to help and offer advice

[@holdenknight4197]

If the cats are burnt out do they just act as a straight pipe?

[@sinformant]

@@holdenknight4197 no when they burn out they generally melt, then break apart and chunks wedge in the rest of your exhaust causing a blockage. If you take them off, you can bust the insides out with long screwdrivers and a hammer, but I am not suggesting anyone do so for legal reasons. But yes if you break the insides out they will just be an open chamber with no flow restriction.

[@raindezed]

Do i need to tune my car or any exhaust modifications before installing this kit

[@sinformant]

@@raindezed no tune, but it works best if you don't have catalytic convertors as they burn off any excess. Unburnt fuel.

[@raindezed]

@@sinformant i dont want to cut off my cat (California) will this still worth a try tho?

[@S197_rexx]

I’ve been running my flame kit for about 6 7 Months now I love it 😂😂

[@key7k]

Do you have your cats and how much wear and tear does it do to the engine?

[@S197_rexx]

@@key7k Catless with a h pipe And it’s good bro and I mean it’s not just good for your engine to dry rev and pops and bangs but it’s been pretty stable no issues but then again u not gone be shooting flames every minute they out your day so I’m sure what u want to use it for it should b fine I’m almost to a year since I installed the hotlicks flame kit and I still rather this over a flame map cuz my 3v mustang gt had a flame tune and now she rest in piece

[@KevinChen-k3s]

@@S197_rexxmy spark plugs aren’t sparking but everything else works

[@Coledebord2]

So does cutting the ignition to dump unburnt fuel into your exhaust cause any damage to the engine over time? Apparently running too rich can harm the engine, and I would assume this is basically the same thing as running extremely rich? Or does it only cut ignition when you're off the throttle or something?

[@UrbanWearCo]

Yes, In all vehicles, excessive use will cause damage to your engine, however there are certain things that can attribute to this. For example, if you have an older less computerized vehicle the damage will take a long time to become noticeable and be fairly minimal. However with the newer vehicles, adding something like this can cause havoc on the computer and sensor systems. I have a 2015 f30 that I just had to take to the shop because i stupidly installed this and it sent the vehicle into a permanent limp mode state. I would not recommend using this on your daily, but if you have a project car or a beater, its pretty cool.

[@Coledebord2]

@@UrbanWearCo permanent limp mode? Unless something was broken (which can be replaced or fixed) I don’t understand what you mean by “permanent” limp mode… limp mode is the computer protecting the engine from damaging itself further if I’m not mistaken and a qualified person should know how to turn off limp mode and fix whatever is tripping it. It’s not like permanent like throwing a rod thru your hood if you can just reset the software or whatever and suddenly it works again lolll

[@UrbanWearCo]

@@Coledebord2 You are absolutely correct in your definition of "limp mode" Allow me to correct myself. My Bmw 335i is in a "rolling tin can" stage as quoted by the last of 4 major bmw technicians in the state of North Carolina. I have spent almost 12k for parts and labor and the bmw technicians are not even an inch closer to solving the issue of what is throwing the car into limp mode. We have reset/changed out the ECU and other major computer components, redid the entire ignition system, including the air-intake system, and other system reading components. The reason I used the term "permanent limp mode" is due to the fact that the car simply will not exit limp mode and has been that way for almost a year. I have plans to ship it to Chicago for one more go at it before I turn it into scrap metal and start over.

[@Cam94killer]

Why couldn’t I just use a separate battery, that I could place in the trunk to power the box and spark the plugs, then I would not have to mess with my fuse box on my brand new 2024 mustang and definitely void my warranty ?

[@CloutStang]

This works by cutting ignition, allowing excess fuel to flow into the exhaust. When you press the button, it basically sends fuel into the exhaust and when you let go, it sparks again, igniting the fuel and creating the flame

[@CloutStang]

If you do it right, you won’t void the warranty. Just make sure you hide the cut ignition wire well

[@Cam94killer]

So, it won’t work? I have an after market exsaust that’s pretty unrestricted, but you’re saying there is not enough unused fumes to make a flame.. I don’t need a giant one just a lil. Lol

[@Cam94killer]

I just thought I heard ppl doing this. But I guess I’ll stop being a bitch and just do it ! Lol

[@HayesTransport]

@@CloutStangno need to cut the wires, you can add in splice connectors that only bite into the wire. Look up “T tap wire connector”

[@blue5slow]

Did those two wires you used to connect to the purple cable come with the kit? Or do we need to buy those separately

[@CloutStang]

There was plenty of wire for it but I added my own just to differentiate

[@xboxdevin4163]

So I have a Lexus is250 when I do it, it sparks and small baby flames come out theirs no videos on a Lexus I think my car kills the fuel goin into the exhaust just don’t know what to do

[@philippebrebion6203]

bro you need to try with load for it to shoot flame i think, without injjector in the pipe,

[@ethanruiz8713]

I had flame kit on my mustang, but to avoid it going into limp mode when not driving and shooting flames and popping keep rpm’s above 2900rpm and car shouldn’t go into limp mode

[@CloutStang]

Thanks for the tip! I’ll try it out

[@S197_rexx]

@@CloutStangmy s197 I just got a hotlicks installed three days ago I been lovin it but I wanna learn how to master it while driving

[@ayuse01]

I just ordered the kit, i got a 454 BBC in a 71 Chevelle. It is carburated and rich i am anxious to install it and see the results, maybe i'll need a pump and some extra fuel to make flames while full throttle. I can't wait to receive my kit.

[@mertcan9344]

I will be glad if you share the result with us, my friend

[@ayuse01]

@@mertcan9344 good news, i just ordered another double kit, so i will be able to make blue flames when i cut the ignition, and big orange flames when i select the second kit with pump, nozzle and fuel spray. Can't wait.

[@Mav1x]

Wait i need to manually press it to make it flame or its a on and off press?

[@be30_Prod]

You gotta manually press it. Your comment was 1yr ago I’m sure you found that out by now

[@qiac]

im pretty sure the spark plug should go in the exhaust tip?

[@CloutStang]

Probably. Blowing my mufflers out now so they should also work

[@Subi_doo]

Oh buddy, it’s sparking lol… that’s how you getting the bangs… your problem might be your not getting enough fuel to make flames. You got enough atomized fuel to make and explosion just not enough to make a flame… curious to know what the issues. Ps: the company that makes those says the engine needs to be gutted cats or catless… if you have cats, that’s likely your issue

[@lil_countryboyyeeyee9726]

Hey man im trying to install it on to my 2013 v6 mustang cant find where i need to splice under the hood?

[@Mla_marlboromanki]

do i need the module for my honda monkey it has only one pipe

[@RagingWithGene]

Hey bro did you get it to flame ?

[@rsssnd_]

I have a 115hp car..do i have to remove the cat ?

[@AlexanderWayneLIFE]

Watsgood bro where did you get your welding kit from ?

[@CloutStang]

Harbor freight! I don’t recommend it

[@S550Reeve]

Do you know whether it needs to be catless or not?

[@JacobLima-t9p]

It’s not sparking because you are running too lean. Rev match downshift at speed if there is no flame you’re lean AF.

[@CloutStang]

I just have to play around with the button a bit!

[@420jovi]

did u get it to make flames?

[@420jovi]

i bought a kit but its only doing pops its not making sparks

[@crxjxe3075]

I’ve been watching a few videos on installs, some say that gapping the plugs can help a lot! Condensation also may stop spark!

[@CloutStang]

Thanks for the tip!

[@itsRedBeard47]

It’s been a few months since you put up this video. Is it working good still? I’m thinking of getting it up for my 6 speed manual 2015 whipple Supercharged Mustang. It is catless with a full corsa exhaust. Do you think it will work with my car?

[@CloutStang]

Catless will definitely work. You’ll have to mess with the activation times (when you press the button) but I’d say with the Whipple you’ll make some crazy flames

[@vetteluvnh]

How is sending raw fuel into the cats good for them?

[@CloutStang]

I don’t have cats

[@FelonieZGunnar]

"I dont want anything to mess with my fuel system" Installs something that fucks with the spark system instead 😂 Nice vid man

[@AlexguzmanGuzman]

I don’t know why, but I like that red Mustang

[@Kevvoo5.0]

Subscribed after watching this video man!!! That pro charger sounds amazing I’m thinking installing some flame kit on mines plus im on e85 and tuned and maybe I get louder bangs

[@CloutStang]

That would be awesome do it

[@jotahdezproduction4724]

Question: do you need to take off the cat right?

[@emmanuelmonroy1998]

Yes, if you have the cats on it’ll shoot baby flames and has the potential to blow your cats up

[@GoldZahn]

Can you make this on diesel?

[@CloutStang]

No, this cuts spark and diesels work a bit differently!

[@jaydagoat9108]

Diesel fuel works off of combustions and pressure. Diesel trucks don’t have spray plugs since no spark is needed to make the combustion happen.

[@assolutorc007]

Which screw size should be used?

[@harshlemon7530]

Can it work on an Ecoboost and would I need to get a new exhaust on it?

[@YumiA350]

you should get a clip of you downshifting with pops

[@CloutStang]

Working on it!!

[@Bikeliferobbb]

Need this to work on a f150

[@jhosephzeron-uf2uq]

Im hear from tt and I subed and followed

[@CloutStang]

You my good sir are the goat 🐐 ❤️‍🔥🙏🏼

[@solow_hb2933]

Chicken noodle soup!!! My car won’t shoot flames. I have spark but won’t do anything. My car just goes misfiring 😢. 2001 lexus ls430

[@CloutStang]

Haha you read the caption!!! Thank you. Do you have catalytic converters?

[@solow_hb2933]

@@CloutStang lol yup. And I don’t. Fully cat less. I cut the “inj” on mine. Although I see I have 2 ign relays.

[@CloutStang]

Oof you want the injector to work! Cut the ignition. So the injectors can dump fuel

[@solow_hb2933]

@@CloutStang yea I was thinking tht was the issue. But since my car has 2 ignition relays. Idk what to cut 😔

[@oo_wail_oo]

Hey bro is there a way you can help me do my Lexus is250 f sport

[@dilmann98]

Is it works on stock 5.0 i mean do we have to tune it or not?

[@CloutStang]

Yes! If you have your cats in though it likely won’t shoot the flames. Still backfires though. No tune needed

[@joaquin.a6067]

Is it bad for the engine?

[@Pilot_mouhamed5]

Fuck no

[@mememes8004]

It’s not working cause the module isn’t grounded sand the paint off

[@dannyb8022]

Did you remove your cats?

[@CloutStang]

Yes

[@BlimpLiveTv]

Your in Pa can you help me with my car? I’m in Philly

[@nickangela199]

Is this safe for cars with catalytic converters?

[@White_Fox_5.0]

Wont work cats are for burning excess fuel. Plus all the excess fuel in the cats is bad for them plugs em up

[@kyle6961]

No

[@adurra__7699]

Will this cause any long term damage to the engine? Looking to do this on my car, I have a veloster turbo not a gt lol so idk what long term effects this might have.

[@CloutStang]

Shouldn’t at all, as long as you use it properly! Not too sure about the turbo application, might cause some problems

[@staryymodzhd7270]

putting this on my NA slowoster😂

[@mladenpetrov1]

Can be installed on motorcycle

[@Davis2920022001]

No flame because pipes ain't hot enough

[@catal_yst]

does this work with the 2023 ecoboost

[@CloutStang]

Yes !

[@MakinMoneyISeasy]

massive flame kit? I didn't see any flame.

[@ricardomadrid4222]

Where you bay I need information

[@modale6125]

Can you pair the flame kit and 2 step together?? Since the 2 step already cutting off the ignition

[@CloutStang]

Sure can!

[@cryptonz06]

this video is giving me electrical wiring anxiety lol

[@niketansidhu6830]

Does it throw any codes ?

[@TehJMastuh]

He said it does go into limp mode..

[@JoseHernandez-hf8cr]

How did you get it to backfire?

[@CloutStang]

It’s a sequence with the button! I’ll post a vid shortly showing how I do it

[@JoseHernandez-hf8cr]

@@CloutStang ok cool bc I got the flames since you rev up to 4.5k rpm and hold the gas down as far as you want depending how big you want the flame and then let off the gas at 2k rpm but I haven’t figured out the backfire

[@Cutthroatfamilytv]

Waiting on backfire video !

[@TheSilverBenz]

Yoo man those are some nice welds.

[@CloutStang]

😂😂😂😂😂 bro they are horrible 💀 I had a harbor freight welder and as long as it works whatever lol

[@xXTH4TxKiiDXx]

Could i do this to my st with no problems

[@VON2TUFF15]

Can u do one hide and seek video and can u try and put turbo on it

[@CloutStang]

Hmmmm… possibly 👀

[@harisahmed5074]

What is limp mode? can anyone explain

[@crazyyking2352]

Happened to me before it’s just a mode ur pcm forces on the car because something super important Is bad. My pcm friend once so it threw the car in limp.

[@crazyyking2352]

Could also be if you overwork the hell out of the motor and completely fuck something up it would throw it in limp. There’s a couple ways but limp just restricts the car to not mess anything else up.

[@Stang_0perator]

My s550 keep going in limp mode how to fix it

[@emanuelramirez4744]

Question bro when you did it did the check engine light came out?

[@863Scat]

It did for me😪

[@essaalmuhairi4434]

Does it effect the engine life ??

[@felominaal601]

Yeah man pops and bangs are not the best tune to do in a car otherwise be prepared to buy a new turbo or cat

[@SeadOsmicic-u9c]

Love your mustange

[@CloutStang]

Thank you much!! ❤️‍🔥

[@demarcus_cousins6315]

My brother is doing this to his car he’s putting it in next week

[@rowdylexus]

Hella flooding your motor with gas but you didn’t hear that from me

[@srt998]

hella wrong heard it from me

[@jonb4952]

is it just me or are their zero flames in this whole ass 15 minute video

[@christopherryan1317]

Does it work on stock headers/cat?

[@d00der41]

...or get a turbo anti-lag system

[@davidpaulik9877]

rip the muffler and all of the gaskets

[@raze_mi]

I think its like the kill switch at a motorcycle

[@LifeOfPacheco]

🔥🔥🔥

[@CloutStang]

Yeerrr

[@VQSNOW]

Thought this was adin ross😊😊

[@BANDODEZ]

How

[@CloutStang]

It’s my alt page

[@angelrivera8367]

Yo how u make it backfire?

[@dirtfish.aditya]

Not good for smaller engines

[@ghosttentv9301]

All in this video is legal in UE to be honest 😂

[@CloutStang]

This comment section is DRY LOL

[@lwazilethoko9267]

😂Fr

[@NathanielChoh24]

12:21

[@richardgonzalez243]

Dudeee!! Perfectly when I need it! I’m installing this today, and we got the same car🙌

[@CloutStang]

Awesome! Let me know if you need any help with the kit install. I hope the video helped!

[@keepiton2carson]

DID YOU GET IT? im following this video tmr for mine

[@jasonthegamer2317]

dahm dats 😎 cooo

[@CloutStang]

Thank you!!

[@stangnutlx]

How gay!

[@CloutStang]

Just like you bby 😘

[@stangnutlx]

@@CloutStangLOL just messin with you

[@dnunley423]

Good way to cause misfires