How To Install HotLicksExhaust Flame Kit On ANY CAR | 2005 Ford Mustang GT

[@leoinfante883]

Sheesh finally I’ve been looking for ways to make my car shoot flames for the longest and you guys did it if you guys see this hmu I could use some extra help

[@mintyfresh.3v741]

Nice!

[@datchannel1]

Awesome to see old hotrod things on new cars

[@DrMatthewHudson]

Like what?

[@5.0Jeff]

So instead of wiring into my ingetion system i can basically just install a relay between the battery and a switch hooked up to some spark plugs grounded and be driving click a button and shoot flame. Sounds easier to me let me know if this wouldn't work.

[@juvenilesampang1857]

It works

[@Atorre554]

If you do this could you run me by step by step or explain it to me? I’m new with electrical and too scared to touch my ignition wire this sounds much more reliable and safer

[@juvenilesampang1857]

@@Atorre554 basically follow the instructions hotlicks provide but instead of cutting ignition, you’re only using two wires that plug to the module and the power source will be plugged towards your positive side on the battery

[@damianoch1538]

No it won’t work. Reason being switch to the ignition coil cuts off the engine sending gas into the exhaust. Without the excess exhaust (unless u r running a really rich tune) nothing will happen.

[@mintyfresh.3v741]

You have to kill thr ignition

[@CheesusSVT]

Nice how to, I won't install this on my car but it makes for something fun to watch at car shows etc.... for sure. 😁 Thanks for filming!

[@DresRacingChannel]

Lmfao you took the words right out my mouth

[@Dyl_Cam]

Yea not trying to be a corn ball on the streets... But... It is cool lol

[@DresRacingChannel]

@@Dyl_Cam it looks dope on other cars fr tho it’s just too much hassle to install it IMO

[@S197_rexx]

Shit hard

[@sebastiancoronado8774]

Are you doing the wot box 2 step at the same time your pressing the hot licks button? @34:15

[@DARKHSULT]

33:54 911 what's your emergency? I hear shots Ok m' am can you tell me what shots Ratata

[@mintyfresh.3v741]

🤣🤣🤣

[@deshawnwilson4046]

Giving me some ideas with my 2008 mustang 👍

[@mintyfresh.3v741]

Lower it, wheels , exhaust/intake/tune!

[@christopherbrooke2142]

What 2 step kit are you running? MSD or N2MB?

[@MUSTANGHUNTER]

That car is beautiful man

[@WayneBennet-m6u]

bloody good vid guy's,i own a 2022 mustang,i would love to do that with my car,but to much root'n around,again bloody good vid.

[@bssomal822]

Does it throw you in a temporary limp mode after shooting flames? If so, any way around it? Also do you have your mufflers deleted?

[@mintyfresh.3v741]

If you hold the button to long yes, but if you use it as instructed it will work. And yes I have a cat delete and a muffler delete

[@thekendallchannel2901]

Can u use it with a muffler?

[@somethingeasy7880]

@@thekendallchannel2901 muffler yes cats absolutely not

[@White_Fox_5.0]

​@@somethingeasy7880 why not with cats? I'm still watching right now, but doesnt it not affect anything beyond whats downstream of the spark plugs?

[@5.0Jeff]

@@White_Fox_5.0 pretty sure it’s because cats restrict the air that comes out so if you don’t have cats all of the extra gas and air comes out to be ignited but if you have cats all the excess gas will be filtered out leaving nothing to spark

[@danielhill5413]

is it just the engine #2 fuse on all 05-09

[@mintyfresh.3v741]

Yes

[@alexsmx10]

I have a 06 mustang gt 70mm turbo with hood dump 🤔🤔🤔will be a good idea🤔🤔

[@calebkevin4072]

Does it have to be tuned also?

[@mintyfresh.3v741]

no!

[@zulim97]

I’m trying to install one on my 2013 charger se but the only fuse I see is 33 and says ignition switch / wireless module . You should make a video on the camaro

[@kennyg0101]

I got everything hooked up. But I'm having trouble with the button like idk if I wired it right. My car still starts but I'm not gittin anything from the spark plugs when I press the flame button

[@ERLEO_Music]

Any tips for where to run the wires on the convertible version of an 06 Mustang GT? No folding back seats unfortunately, and I don’t want to try to cut/drill around any parts of the convertible roof

[@misterbulger]

Does it work if you have cats? I have an 04 GT 😎

[@peso5412]

Does the size of your exhaust matter?

[@ScrubPapi7]

please do a video on on making N2MB work with the hotlicks kit

[@deleted....2000]

I need to know which one is for a 2v 2000 mustang gt such as where to wire to the relay

[@brendanwalsh5213]

I have a g35 can't wait to do this

[@mintyfresh.3v741]

Do it!

[@daevincaldwell3201]

Hey bro, when pressing the button, you just rev it over 4500 while holding and let it decel? And just keep revving it and holding it for the flames? Or you have to hit redline?

[@lacedupantics3390]

rev then decell press the button

[@damianoch1538]

Anything above 3500 rpm’s and also depends what you drive. It all matters how much gas goes into your exhaust

[@mintyfresh.3v741]

Rev it tk aboht redline , then hold down the gas and hold the button, the whole time

[@Youngthugger54]

How you did you make it do like a 2 step sound are you tapping the button lol ?

[@mintyfresh.3v741]

i have a n2mb 2 step in the car too! i wired a seperate button to ignite the sparkplug without cutting ignition so i can use it while using the 2step

[@bryanmartinez1167]

@@mintyfresh.3v741 what If I don’t want it to cut ignition at all and wire it so it doesn’t cut ignition would I still be able to have the 2 step flames and the decelerating long flames?

[@nmk1111]

Does it changes something if instead of 8 inches i put it like before the silencer?

[@mintyfresh.3v741]

I belive it can

[@youTube0909b]

I really really want to try this on a 5th gen Camaro with a HOOD EXIT EXHAUST LOL. Do you think it would work? Do you think it would be safe? I would probably only turn on the kit when in park because while driving the flame would come towards the windowshield and probably end up messing up paint and staining windshield

[@damianoch1538]

Yes it will work!

[@mintyfresh.3v741]

It should work if installed properly!

[@xbmpr]

Camaros aren’t rollin coal per say so I feel like the paint and windshield would be effected years later

[@gabeb8047]

can u run this with res test pipes and down pipes?

[@mintyfresh.3v741]

That should work if your cat less

[@anthonyparas8086]

Hi, liked your video but im confused which wire to cut? because i have two, one is the IGN ignition switch and the other one is the IGN2 ignition switch2

[@tstimevato]

You running a two step in conjuction with this kit ?

[@mintyfresh.3v741]

Yes running the N2mb 2step

[@sierra5713]

@@mintyfresh.3v741 What is the N2mb 2step for? The hotlicks website says the kit comes with everything you need for the install

[@riammey]

@@sierra5713 it’s to get the popping flames that he had at the end

[@twistedgaming7999]

Do you have a 2 step installed too ? Or douse the kit make it 2 step a little like that ?

[@emiliogonzalez5302]

I have a 1998 mustang gt but i dont know where to find the ignition fuse. Do you have any tips on how to find it?

[@fixxerupper2138]

Going to try this on my e46 cheers!

[@DanielHernandez-fy6gl]

Does it also make it pop with flames like a 2 step

[@mintyfresh.3v741]

no, the hotlicks only gives you afterburner flames, if you want pops you have to get a 2 step

[@sysdjdhdhkvsuhvskj]

@@mintyfresh.3v741 is a 2 step bad for you car?

[@codywhite2853]

@@mintyfresh.3v741 How did you wire the flame kit to have it spit flames on the 2 step with the wot box?

[@heavyjoystick2352]

​@@codywhite2853 here for the same thing :)))

[@jayloncephas4947]

Where you guys located I’ll love to have y’all do my car

[@mintyfresh.3v741]

Virginia!

[@njhgv9192]

33:40 Is where its at.

[@schmidtygt]

Would this work with a carbed car? Or would just a relay to a plug be better

[@PauloHenriqueBittencourtP]

That’s work for a 2013 mustang ? I have everything done, besides the ignition coil wire. I already tried to cut the coil wire directly from the ignition coil, but doesn’t works. How can I do ?

[@dankstabs]

hold full throttle and button??

[@sebastianrea2959]

Will this work on AN AUTOMATIC?!!?? I got a 3.7 stang automatic and wanna know if itll work

[@mcmilo3617]

!help! Can I do it on a auto or just stickshift ?

[@joshs.4257]

how did you drill though it so easily my bolt tips are hard af to drill into

[@devineclemons2292]

How can I do this on the 4.0 2005 mustang I don't have the 2 red wires

[@casperdinero2099]

Did you figure it out?

[@feryairzeth]

So if only work as a 2step feature or can you used it while you’re driving and downshifting??

[@WarHeadinc1]

Most likely.

[@coystroud1636]

How did you wire the second switch? I’ve got the n2nb wot box on my 2012 GT. Do you just splice the button into a fuse? If you could respond it would really help me out!

[@tylerwittmann808]

I have the 2011. I don’t have any idea on what fuse to use. Any help?

[@mintyfresh.3v741]

I can look later!

[@masonprice9218]

Did you ever find it

[@ariankojefferson2758]

For Ford mustang 2011 v6, it is fuse 40.

[@danielhill5413]

hey man i have a 2006 v6 mustang and my fuse box wiring is different do you think you can help me because I installed mine and i'm not getting no spark but when i touched the spark plug it shocked me

[@austingudino8314]

check the relays, make sure you’re get the 12 V, flip them and test it out

[@mintyfresh.3v741]

The best bet it to call the hotlicks guy, but your spark plug should grounded tk your exhaust to work

[@parkerdahl1331]

i’m putting it on an 07 v6 and i can’t figure out which wire is the ignition coil wire to cut into

[@christianfontaine2390]

@@parkerdahl1331 i can’t figure it out neither

[@jaysix6779]

like how you showed how you didn’t use a welder, good shi

[@tylerknight8822]

How did you change up the rev (2 step) after pushing in the clutch. Like a little launch mode lol

[@gursewaksandhu6351]

Guys can anyone tell me how it will work on automatic transmission while driving?

[@henterdiaz9884]

Hello brother, congratulations for the video is very useful. I would like to know where to buy the 2 step. You do not have the video where you install the 2 step. thanks brother

[@OeazyTrT]

Any car🤔 I have a 2018 Impala the mufflers kinda point downward would this still work?

[@brandonholland1369]

do you need to be catless?

[@boofmaster_281gt3]

Hey buddy found ya! Finally shootin flames with y’all

[@gavinlaratonda2792]

Hey man I saw your car at Richmond meet I had the blue 3v by Derek's terminator

[@mintyfresh.3v741]

Ayyyy nice

[@XxFaDeClanPS3xX]

Im doing it on a 2012 honda civic, got the spark but not able to get a flame, did the same cable tap in to ig coil but couldn't get it to shoot, please some one that could help me

[@AllSoWavyReese]

Can u have resonators with this

[@drewmcdonald8077]

I have a 2004 chevy impala, I’m confused on the fuse part because that is all I’m missing. Could you help possibly?

[@mintyfresh.3v741]

Best is to call the hotlicks guy and get a wiring diagram for your car

[@drxz9x6]

will this effect anything if u have a tune?

[@mintyfresh.3v741]

Nope!

[@SuperiorDefense]

@@mintyfresh.3v741 it cuts the ignition. If you have anti lag or a burble map then yes it will 100%.

[@daevincaldwell3201]

@@SuperiorDefense like what? I have burble tune on my 3v and wondered what it would do when I install mine

[@SuperiorDefense]

@@daevincaldwell3201 contact the company that makes your tuner. Your tuner is tied into your ecu which controls your fuel, timing and ignition. This does the same bypassing the CPU. Your tuner isn't going to know what's going on when ignition starts violently dumping fuel and cutting. These are cool on hot rods at car shows but lame on anything else. If you want to shoot flames from a car it's not too hard with fbo exhaust, downpipe if you have a turbo and a tuner that allows fuel management and 2 step. Go on a forum for your car, someone probably has a 2 step map they'd share. It's also very bad to constantly do because of detonation but a few times won't hurt. Same with a burble map, not good in the long run no matter what some guy selling burble maps says. Subaru shops love them because how much money they make resurfacing your heads and cutting new valve seats after a year.

[@GGhxstyy]

You guys in cali?

[@Coyote_boa]

Do you have to have a two step?

[@fixxerupper2138]

No

[@merganbergan5490]

Do you have take off your cats?

[@ariankojefferson2758]

Hello, very interesting video. You are so amazing. I have a question to ask. I have Ford Mustang 2011 V6 3.7L Auto. But I was told to delete cats. Actually I didn't understand what it means. What I see in your video, does not show you removing the cats. Could you explain about this part? what if i didn't delete it. Will it work?? if you got another video about this, I would really appreciate you ❤️🙏.

[@somethingeasy7880]

Catalytic converter it's on your exaust you will have 2 if I'm not wrong and if you run this system with your cats (Catalytic converter) you'll just blow then up or they will restrict the fuel to the point you won't have flames.

[@somethingeasy7880]

Just saying cat delete in alot of areas might be considered illegal would be smart to buy a 2011 v6 mustang test pipe or if you want it permanent and it's legal wherever you are go to an exaust shop ask for them to do a cat delete

[@darwinlopez7883]

How much do you charge for the install ?

[@buccoroos4285]

Is the car paint turquoise ?

[@champagnepapi4425]

Can anyone help with the wirings for a 2018 mustang gt? Wouldnt want to mess anything up in the fusebox

[@deadlead03]

will this work with an automatic

[@lowkeydiegoduran4724]

Yes

[@The_HolySpirit_5.0]

Can you install this on a v6 automatic? Like what are things you need? Because I heard you cant have cats , do you need a tuner?

[@yousryyou6859]

You can have cats, but they are recommended to be removed, and you don't need a tune. I have a v6 and want to do this as well

[@ItsHayzar]

I see those kit coming without propane so my question if 1.4T(160HP) Could get some flames it staright pipe so its spitting little bit of fuel, What you thinking?

[@youTube0909b]

I have watched some other videos of small engine cars like that one for example look up "hood exhaust spits flames". and they don't spit as big flames or as often but if you're trying to get that impressive effect and wondering if it will work at all. It will work lol. and if you get a retard timing box (2 step) to dump even more fuel into the exhuast and straight pipe it (that is a must) it should spit bigger flames

[@mintyfresh.3v741]

It should work

[@alesblae2512]

How many wires did you cut off ? Is it only one or 2 ?

[@spencertchow]

how did u rev limiter and shoot flames at the same time??

[@matthewdilocker5234]

thats what i am trying to figure out!

[@dzipklubzabacsrbac805]

Hi guys,has anyone done it ona a grand cherokee wj 4.0?

[@Perspective2077]

i have nexon(indian car) can it possible to throw flames like that.can u suggest me exhaust and flame kit

[@maisonmariscal7128]

Did you have to cut the cats?

[@mintyfresh.3v741]

Yep

[@edelfurioso22]

Where you pressing the button quickly when it did the 2 step Like effect?🤔

[@mintyfresh.3v741]

I actually have a 2 step module and a seperate button to light only the spark plugs without cutting ignitjon

[@thatcarguyyurei]

@@mintyfresh.3v741 how does one wire that, do you hook it to the battery or something else to get the right voltage (im not very knowledgeable on running electrical)

[@JacobNorvald]

do you have to do anything extra to the car or do you just put this kit in?

[@leoherrera1783]

Do a 2014 mustang

[@emmanuelloaiza9257]

Hello, did you run both red wires from trunk to the switch or did you splice them together then run 1 wire to switch? Thanks

[@tonyseewah3344]

He splice the 2 red from the 2 module into 1 then run that 1 wire to the front switch

[@baddribblegod]

What rims???

[@The_low_and_slow_2.0]

“We’re broke boys” huracan in the back😤

[@nickiyanimations]

I feel like I've seen this car in south carolina

[@mintyfresh.3v741]

I was down there for mustang week👀

[@ItsJustVal.]

bro that is amazing! Now looking if I can do it to my ride LOLZ XD

[@s73pny65]

does it work in 482cc diesel?

[@damianoch1538]

Can diesel be ignited by a spark plug? Mmmmmm no

[@mintyfresh.3v741]

Deisel dosnt burn like gasoline

[@s73pny65]

Sadness

[@On_3]

What a comment

[@supccp9392]

Where did you get the decklid?

[@masonprice9218]

Is it the same for a 2011?

[@mintyfresh.3v741]

You have the 5.0 thr wiring is dofferent

[@masonprice9218]

@@mintyfresh.3v741 I figured it out for anyone else with 2011 and up it’s a yellow green wire under fuse box around a 16 gauge size

[@therealrealshocker]

Do you have to have a cat-less exhaust system to make this work?

[@CGLWolf]

Yes and no. If you don’t then the excess fuel in the exhaust will slowly deteriorate the cat because it will essentially be “setting the cat on fire”. Before I went catless my car was running rich for a little due to a cylinder misfire and just that little amount of time destroyed part of one of my cats.

[@therealrealshocker]

@@CGLWolf oh damn. Alright thanks for the info/heads up. I appreciate it

[@ariankojefferson2758]

@@CGLWolf so it means it doesn't shoot flame with catalyst right??? I got Ford Mustang 2011 v6.

[@Hebert104]

Does anyone have any clue how to wire this on a 2011 Camaro 3.6L ??

[@isicks2k128]

How is this safe? Youre washing your cyl with fuel

[@jessesanchez9364]

I have a 2010 camaro ss would the wire I cut into be on the actual coil pack harness and would I splice into both sides?

[@lifeofty5018]

Call Hotlicks for the 100% answer but I believe so.

[@diesellife3850]

I know how

[@pimpsticklee]

​@@diesellife3850Please explain how I'm trying to install one on my 2014 ss camaro

[@Manomalo]

I’ve been trying to install this to my 2018 ecoboost but everytime I look for the wiring diagram or colors I have to pay can anyone help me out?

[@nateperez122]

Contact hotlicks theyll tell you which wire it is. I had the same problem couldn’t find a diagram until I contacted hotlicks. They sent me a picture and i wired it up. I have a 2015 gt

[@arjunhuerta8990]

May i ask where do i find that spoiler?😳

[@lifeofty5018]

Brandonpolar66 on Instagram!

[@dxddyminato3145]

“We’re broke boys” Has lambo in back of view

[@atvelasco15]

Try installing that on an 02 Mercedes clk 🤧

[@trooper0198]

What colour name, code is that car?

[@mintyfresh.3v741]

It’s a wrap!

[@shitbox_ej2433]

Just wondering if this kit + a burble tune will be a good idea 🤣

[@kalebhicks2263]

Honestly this might go crazy wit a burble, I think you gotta control when the flames spit tho, idk to much about this spark plug in exhaust thing

[@shitbox_ej2433]

@kalebhicks2263 I can't get it on video but if I time the button just right I can get one loud ass pop that sounds like a mf frag grenade 💀 I'm scared it might crack my headers or something

[@codelucid9493]

@@shitbox_ej2433 i can get that super loud pop like all the time i just can't get it to shoot flames

[@lambofeaby_1262]

I want to see someone put this on a prius

[@smittyttg2029]

Bro do you have a tune to make your shit pop like that at the end?!? Jeez that was beautiful

[@omgkevintv5259]

can u just wire it straight to the battery with relays instead of the ignition? or plug it into the fuse box straight?

[@Adam-om9hu]

Lol, he says were broke boys, but has a lambo next to him in the garage 🤣

[@be30_Prod]

Bro plz how do you get that mf to 2-step?

[@alienmonkeymodz9184]

Does you have launch control on it ? How does it rev like that ?