OLD 2013 - Benjamin Marauder Regulator - See the NEW MK9 Pro 2019.

[@robertlanedesign]

Very glad that they come across clearly. I used to go graphics & illustrational communication some twenty years ago, but very rusty now :-)

[@ThomasGutierrez-zy9hu]

I’ve only put one round through it and have had it filled for 24 hours. kzbin.infoUgkxuuTOBP7pzC6RDNNaxoSjjV4-7jpsUjXX No audible or visible leaks so far. It’s definitely loud. I’m impressed with the look, and I have to say that I’ve been avoiding this rifle because of the looks. It feels great to hold and it’s light enough to carry. It looks much different in person. I chose to purchase this one because it checked all the boxes for what I intend for it, minus the look. I’m very happy with this air rifle

[@azycray4801]

Excellent video to help me understand the workings of my new Marauder. Good thing you had those rubber gloves on, you might have gotten a nasty paper cut :)

[@neilwebster2050]

One of the most informative videos I have seen yet. Nice work thanks for taking the time.

[@StachiBCNR33]

Couldn't have done it better in Inventor or SolidWorks! Thanks for taking your Time to educate us!

[@andyprice4696]

Very well made and helpful video.

[@ulunnaulak5839]

how many pellet can it be shot after installing a regulator? please answer my question...........

[@miafrench9688]

A must have!!

[@krustyoldsmoker7997]

Come in 6 years ago well I dusted It Off and view the video I like it I'm just waiting for my PCP flashpup just show up this week I'm excited first PCP can't wait to get it break it down inspect everything put it back together take it out and shoot it have a great day keep shooting bang bang Bang he he he

[@HeshamALAhdal]

your information is really helpful, the way you describe everything is really impressive, informative and clear, in your opinion, what do you think about the design of Altaros regulator on Marauder? it is a narrow long cylinder shape that inserted inside the pressure block and threaded into the valve.

[@aronkeylfb023]

thank you very much I already have my regulator. All very well

[@redgum1340]

I'm thinking to myself, wouldn't you want to increase the volume between the reg and the valve throat? I'm probably thinking FAC purposes. But that would be the case, right?

[@redgum1340]

Hello Robert, can you help me out with the size of the spring in this regulator? Simply the OD, ID and length. I'd like to have a go at making my own as my rifles are quite different to the Marauder however the 'format' is very similar. I currently use the Chinese Bell washer regulators but I don't believe they are any good. Your spring system would be much more consistent, I believe. If you would help me with this info, I'd be grateful. Cheers

[@tubrobsamui]

Super presentation - really couldn't be clearer - and a real shopfront for your product. I'm in the market for a Marauder regulator and your unassuming yet completely authoritative presence has me sold!

[@robertlanedesign]

'Thank You' For your comments - I think a picture or video is a better demo than a written description aloan.

[@robertlanedesign]

'Thank You' - Bit rusty on the pen & pencil these days, I used to go graphics & communication years ago. Cut away of engines & pumps etc. last year to do that before computers came in.

[@consistentbass]

Will this fit the Benjamin Armada? I believe the internals are the same not 100% sure.

[@redpuntohgt]

if you remove the gauge the o-rings are provide the raight air seal so no air leaks can be found?because normaly all the airgun regulator providers suggest 0.5-2mm breathing hole. Great videos!!!

[@robertlanedesign]

Yes: You can mount it into the M-Rod in place of the Gauge Block.

[@wolff2233]

Like your drawings. Really cool!

[@Bjeka1970]

I too am the owner of the modernised rifle. I think that at you very small volume behind a reducer.

[@eqm95]

if i remove the gauge to fit the regulator, then i don't need to make a hole in the air reservoir right?? thank you

[@robertlanedesign]

That is correct - Please watch our other M-Rod video it is more indepth.

[@davidtuazon310]

Can you ship to Philippine a lower and upper receiver. . of airgun pcp if yes how much. .

[@Dutch.1722]

Shame they are sparce. They can shoot from Monday to Sunday at 11.5 fpe.

[@antoniofrancese2522]

vivo in Italia MK8 si può istallare senza portare modifiche con fori, se non sono contento potrei ritornare allo stato originale della carabina1

[@Ahsankhan-ij1qo]

if you want high power over 50 + FPE just put extra peace and than put regulator am I right?

[@davidborman6102]

Hello Robert, which you feel it will be optimal pressure (BAR) for the Benjamin Armada using your Regulator? I believe that according to standard ballistics, it will depend in the twist rate of the Armada barrel rifling twist (which I don’t know) and pellet weight combination for optimal stabilization. I was planning to use Polymag 1.62grams and or Haendler & Natermann Crow Magnum 1.72 grams. Please advise.

[@surfacedriller111]

Hello Sir, is this regulator for decreasing rifle power in countries where it is law limited, or just providing more constant performance?

[@robertlanedesign]

Just for more constant performance.

[@vuduongthiet9626]

Hi. I live in Vietnam. I want to buy a gun. he can not move about Vietnam.

[@001parkster]

Are you in the market for fitting these regulators for customers, if so how much would you charge?

[@robertlanedesign]

I am in the UK and we very very very rarely see them over here.

[@ChupaChoddy]

i like one please

[@pilomas1]

Factury for At 44 long?

[@pilomas1]

hello, envio a Argentina?

[@pilomas1]

Precio?

[@henrygarcia6078]

Will it fit Gen1. 22 marauder?

[@KAOSRIFLE]

Yes: But there is Now a MK9 which is Ultimate Ace = On Ebay shop LaneRegulators or www.laneregulators.com

[@joialjoial3435]

ok

[@joehunter3829]

I don't see the point of drilling A hole in a marauder just to use this I wish I could just pop it in and use it