One Day Shower Prep!!! MUD PAN with Kerdi and Ardex 8+9 : TileCoach episode 28

In this video I show how I take a shower from studs to ready for waterproof using a mud shower pan and Schluter Kerdi membrane with Ardex 8+9 over the top.
Many installers don't know this, but you can actually install over fresh dry pack (deck mud) mortar. Our projects are time sensitive and we need to take advantage where we can shorten the time between each step.
I show how to install a Kerdi drain, how to slope a dry pack pan, how to install a curb, how to install the kerdi membrane over fresh dry pack, and how to install Ardex 8+9 over it.
Please leave your comments in the section below, and find me on instagram @tilecoach.

[@scottbrownconstruction8008]

I'm a general contractor (new construction, remodels, etc) and have been in the trades since I was very young. I've experienced the same frustrations that many have mentioned here. It's not always easy or glamorous and yes, there are times you lose work to lesser qualified contractors after spending a lot of time quoting it. However, I completely agree with you about entering the trades, especially for those who are younger. If I had a little advice, it would be this. Whatever you do (tile, flooring, framing, plumbing, etc) learn to do it well and never quit learning to be better. Don't be in a hurry to be your own boss. Rather, find someone who will teach you a trade, not just how to do the work. Lastly, look for a need and fill it. There's an electrician on every corner, where I'm at, and a serious need for plumbers and quality dry wall guys, as an example. The trades are not a get rich quick scheme. Instead, they're a path to a rewarding career that can provide a very good living and future for you and your family. It has and is for mine. Thanks for your enthusiasm and encouragement!

[@TileCoach]

Great comment. Pinned.

[@roostermcghee9506]

I just want to say, while I am not a KZbin personality at all, I truly enjoy following both of you. My story is a bit different from yours. In my youth most of my training came from making my own mistakes and being penalized for it. Tradesmen were not so eager to share then. Or maybe, I was not a good student...lol. Possibly... However, upon finding my niche in floor coverings, I found tile to be very exciting. Everybody here in GA claims to be a tile setter. Many of us make jokes about a certain ethnicity being assumed to be very good at it. My point being, both of you gentlemen demonstrate the tenacity to do quality work, as well as enthusiasm for the next generation of tradesmen. Thank you for that! I don't know about Cali, nor NZ, but I have difficulty finding help in the generation after mine of any reliable quality. 20 years ago I could just pick up an 18 year old kid and they mostly were eager to learn. Not so much today. We need people to learn from the proverbial old timers (more so myself than you gentlemen as age goes). Otherwise, who am I going to pay when I can no longer do the work myself? Though, in my experience, presents another set of problems...😂😂😂

[@izzdiesel8556]

I agree, a construction career is a marathon not a track meet but when it starts to come together the sky is the limit.

[@powderpuff1964]

I’m only handyman but I believe in taking your time and carefully follow instructions and then do that extra 10% extra I always use the best products I’ve done a few wet rooms now and none have Leaked Internet is great for cross-referencing advice and opinions and then eventually you come up with a really good idea to look sound in I do like your carpentry videos and a few ideas from you you are a really good craftsman

[@kirkdunn1379]

Amen......been a GC for 20 yrs and started as framer than finish carpenter but learned most trades after awhile.....do a good job, do your best to please client and learn as much as you can.....have been lucky enough to learn and be efficient at most trades and do most of my own work on remodels.....and still it seems I come across new things after 35 yrs......construction is an art and still feels good looking at what you built at end of day To me it seems like common sense but clearly it isn't and has been pointed out that its not, lol

[@jamesyoung4633]

I'm a 75 year old DIY er I owned a 37 unit apartment building for 17 years in Cass corridor of Detroit. My son and I did most of the renovation on our own. I love vedios where I can learn and expand my knowledge weather it's used or not, because knowledge is a powerful tool. Thanks for your vedios.

[@Stevelemontrudy]

Thank you so much for how thorough and well-explained your videos are. You tube is full of people making how-to videos that are sped up with little to no explanation. I really appreciate your long form format and great explanation of not only what you're doing, but why you're doing it too. Thanks again!

[@BahRod00]

I agree. I'm a DIYr and had a lot of questions. Thank you very much for taking the time to explain step by step, and for advising on products to use. God Bless!

[@jimeisley8041]

You are an excellent teacher and your workmanship is impeccable, this is coming from a retired electrician after 48 years in the trade👍

[@fourtheusual]

I'm a diy individual. You have helped me with my planning of my remodel. Thank you

[@tndryb]

i just watched half a dozen videos on this subject and this is by far the best, clearest, and most informative instructional video. thank you. so glad to have found this resource!

[@johnbutts1743]

I have been a flooring installer and tile contractor for 25 years. And I must say. You have changed the way I do things. You have definitely taught me alot. I think you!!! JB flooring

[@GregoryGuay]

I have an existing dry pack mortar pan that had some moisture issues so I ground away some little problem areas. I’m thinking of adding some thin set and then another thin layer of dry pack mortar to smooth it out and then perhaps the Schutler liner or shower kit. Did he put a dry pack mortar on top of a flat concrete floor or over an existing dry pack mortar pan?

[@rudydog8008]

I install Kerdi showers. I have also seen most of the the videos on shower and tile preps for showers and Your technique and quality is far better than anyone out there. Your shower will not leak. It is nice to see someone enjoys doing it right. Keep up the great work.

[@seephor]

Great video. If you’re a newbie, you can cut 3/4 strips to the correct height for the correct slope and level them around the shower that way you have a straight firm place to screed from. Once it’s sloped, you remove the strips and fill the void.

[@sucmanh]

How can I better visualize what you said?

[@vancouver4sure]

Man your such a artist/professional! Knowledgeable and well spoken! Thanks for sharing!

[@georgeescaped6035]

this from a finish/trim carpenter, i like that you use possibly the most expensive level as a deck mud scree... NICE !

[@jam1324]

Issac, been watching alot of your videos over the past few years. I love your work ethic, demand for the highest level of craftsmanship and thirst for knowledge and understanding of all building techniques. Little tip with that stabila level when you set your drain, turn the level on its side and you can use both bubbles at the same time to level it across both planes in one shot, give a try some time and you will see how much easier it is.

[@rattown99]

I woke up this morning with the same job in front of me and 50 questions in my head about how to do it correctly. You answered every question I had! I have been following you since I started this job and feel confident that I am using the best system possible for a water proof shower Thank you for teaching us to be better!

[@dbeaulieu9730]

To me it's about ethics. If you want to call yourself a professional tradesman, then you have to constantly have to train yourself to do a better job each and every time. I agree with you about sharing information, it benefits us all. Keep up the good fight guys, I've been doing it for over 50yrs and still look forward to it every morning.

[@jmharrison3]

My man, I have been doing that method for Kerdi flanges since my union diapers, lol! So happy to see a fellow tile installer who has pride in proper preparation!!!

[@GregoryGuay]

Hey Mike, quick question- Did he put a dry pack mortar on top of a flat concrete floor or over an existing dry pack mortar pan? I have an old mortar bed that I grinded away some moisture damage and wonder if I can just put a layer of dry pack right over it….after setting a Kerri flange adaptor in.

[@kennycasillas901]

This guy is a pro. He knows how to pack mud, push it back and forth and stroke it continuously!

[@vinniegugger3317]

🤣

[@jefftilleman8824]

There are many options when it comes to jobs in the building trades. I love your enthusiasm for what you do.

[@timthomas4046]

Wonderful video, I am retired but I love making improvements to my house for my older mom. Keep up the great work. Thank you.

[@oldskoolwayy]

If you are retire we the people can always use remodeling advice, Do you think you would be interested in creating home improvement videos people would love to see them..We need all the skill advice possible..

[@Seawizz203]

I second your advice for young people getting into the building trades. I started out painting and contracting and did it for years. I later became a firefighter and did it part-time while on the job. It was a great living and even better today because of the shortage of good workers. You don’t even necessarily have to be experienced when you start out. You just need to be willing to work. Show up on time, work hard and learn your trade and you’ll do well in the trades. You’ll make more than a lot of people who’ve had four years of college once you learn your job. Nice video. I watched it because this is one area I have no experience in. Thanks!

[@pinecorey]

I've been into flooring for thirty years and have had 7 minor call backs. Why because i care what i do. Never made money like the other contractors but they spend a lot of time and money on their call backs which were all the time. Done the job right the first time so i could sleep nights. That i see is what you do, contractors need to care of what trade their in and do it right the first time. Love your work and care you put into it. ❤👍

[@owl1873]

Great technique youg man, one of the best tutorials Iv seen yet. We did things alot different back when I got started in 1981. Modern materials have made things so much easier for you young guys. Keep up the good work.

[@2manycatsforadime]

Use a grease pencil or sharpie around your parameter line, easy to see for a quick check. You put this backer board directly down into the pan. You trust this product over others. In the past vids you mention to keep the backer out of the pan. This is really beautiful work, wow! Great messages at the end of your vids, uplifting, thanks.

[@jeffostroff]

Ardex also known as insurance. this shower will never leak now! Good Job!

[@apex007]

never say never... depends on how much house moves.

[@thilltony3362]

BRAVO!!! I'm a 30 year veteran contractor/installer, and I started watching with the mindset of giving some suggestions to help you improve. To my delight and surprise, you did your install exactly as I or one of my good apprentices would. EXACTLY. The only thing we do differently, is we put metal lathe down right before placing the dry pack mortar. This may be overkill, but it makes us feel more confident. Besides that, there is nothing I would add to your presentation. I appreciate your suggestion that younger people look into getting into the trades. We need more young people to learn this stuff. If I weren't on the East Coast, I would swear that one of my guys taught you. While watching, I would say to myself, "Don't start packing it like.... Oh, you got it right." Then, "Make sure to work it into.... Oh, you got that right too." From then on, my smile got bigger and bigger, as it became obvious that you are actually a TRADESMAN, not just a guy trying to make money. A tradesman learns how to do his job properly, and is quick to make any changes to improve his craft as newer methods, materials or tools become available. Skillful work will keep you busy regardless of the economy. If you were in our area, I would funnel you tons of work. You would never have to advertise. I'm sure you will do well wherever you are, with your attention to detail, and concern for quality work. Again, BRAVO! -Tony Hill Anthill Construction VA Class A and BLD MD MHIC and MRHB

[@dougjones4987]

@@AOmega72 ha,really

[@kingsleymainwaring96]

Love the honesty and positivity . I agree that youngsters should get into the building trades. Earn a living creating great homes for people. Love from the uk

[@claytonlogan4240]

Bro, you're clearly passionate about your work and that's what it's all about! This video was super informative. Thank you so much for what you do. This will help me become a better installer!

[@owl1873]

I totally agree with your comment regarding the building trades. There's nothing more satisfying then then big pay checks for doing something you enjoy. Just make sure the work you preforme is detailed in excellence and quality because bad work dousent produced return customers and referrals. Also get familiar with and learn to preform the trades that accompany the work you preforme that way you can cut down on out sourcing things like plumbing and electrical and making more money doing so.

[@miketrombly6652]

It’s good to watch someone who is good at what they do

[@dlrwirelesspro]

You make it look so easy, experience is such a valuable tool. I fought mine for hours the other day. I should have watched a lot more videos, even though I watched a ton to begin with. I have a small low spot from smacking it to hard. I am going to test the water drainage before tiling the floor. Hope I don't have a place that water will sit. I am a avid, highly experienced DIY'er and you Sir have a true gift. Thanks for the videos!

[@eccrusr]

Nice work... I've been out of work in Houston since March. Had some experience with remodeling homes and grocery stores as a young man. I'm 62 and back to doing small projects. I appreciate the new product information you provided and the how to. Thanks!

[@tomphan5655]

Great video as always. Appreciate your honesty and effort in sharing your experiences. Your customers are very lucky.

[@barrysowell8216]

Thanks for the video, awesome craftsmanship. I just gutted my 40 year old bathroom for my first DYI remodel, and found walls covered in black mold. With what I’ve picked up here, I’m confident I can do this 😎

[@claymerritt3116]

I would add- always 1/4 twist when putting glue up plumbing parts together

[@dannytexas09]

This has to be my favorite shower setup.

[@rusodevelopment]

Been a builder for many years. Excellent work.

[@joshuamendez2962]

Thank you for leading and who you are. You inspire me thank you!

[@billbarberconstructioninc.17]

Great video brother... I'm a GC in southern California. Riverside/ San Diego. Def need to inspire more younger generations to join the trades... I'm a third generation remodeler, been self employed now for 5 years... I can't believe it took me this long to switch to kerdi and schluter systems... I was still using hot mop in 2019 haha. Any of you younger guys looking for a full time apprenticeship jobs, leave me a comment... Keep up the great work Isaac

[@ianmiller3204]

Thin set on a freshish mud pan is next level flexing

[@dillardnorg]

Thank you very much. I'm a retired machinist with time on my hands learning to do my own work. Thanks again.

[@ericrogers9253]

Always had concerns about the seams in the Schluter system. Your solution of using Ardex 8+9 to address the seams issue is awesome. It is going to be an absolutely must have when I do Schluter showers.

[@shelygirl6386]

I just had to rip out our early 70s bathroom because, a-our very blue toilet and sink corroded and failed and b-we just couldn’t take the mildew smell anymore. We are on a slab. The old mosaic tile was set right on to the slab and the shower tile right on to the drywall. The shower wall that is on an outside wall was getting moldy behind the drywall, no wonder the room smelled. After watching a few of your videos and seeing how even the best trade person could run into an eventual failed shower, I know I could never install this myself. And I’m glad that you’ve done these videos so I know what to look for and ask in a competent bathroom remodeler. I also love how you are going above and beyond for anyone that happens by your videos to put them in touch with a tradesman in their area if they’re interested in learning. I’d love to learn it myself but I’m afraid I’m too old! Thank you for your time and effort!

[@laurenharper1510]

Wow I really loved how you did that shower. I just did a dry pack on concrete and it was really fun. Then I laid a beautiful tile floor that I’m so happy with. I’ve been remodeling a long time-30 years - but I’m also a teacher. I really want to stop teaching because the public school system just frustrates me and I cry on a daily basis. I may be asking you to help me get set up with a good tile company after next summer. :)

[@robertfish6617]

Thank you for your excellent videos and being a champion for the trades. In my younger days in school they were pushing us to go to college which caused me great failures. I have now been in the trades for many decades and wished I had started sooner.

[@matthewsaltzman5573]

One of your best vids so far! I love all the detailed explanations, and I can tell you have all your procedures honed. That is a ton of work to accomplish in one day. And only possible with experience and smart processes.

[@josephmedlow536]

I'm and HVAC contractor for over 10 years bro, and my impression of you is good people. May you succeed in everything you do. You teach me what to do in my home project.

[@vcorn9544]

Thank you for the excellent presentation. Been in the trades for more than 30 years. Recently decided to go on my own again but this time doing remodeling. Thanks for the encouragement.

[@Someonereallycares]

This is amazing reference and great resource for shower installation. Just got a project and will be utilizing this method. I love this video.

[@stevenrennie2612]

Am watching all ur videos as one day I’m gonna rip out my old bath and install a walk in shower, so I’m trying to get as much research and advice as I can before I do it, I’m a multi skilled kinda fella but I’m not a shower expert but can’t wait to get my teeth into this project

[@MrOpinionCantSignIn]

Thank you for affirming all my reasons never to deal with this system Time, money and a whole bunch of question marks . Gee, just caught you saying that Schleuter has acknowledged their shortcomings . Hot mops are still my favorite ... and if I need something 'quick' .... a gut - one piece - properly folded un-cut vinyl liner is what I'll put my reputation on

[@LorenLew]

Wish we knew you were this close to us when we had our 2 baths redone😢... Love your work and patience

[@09hockeydad]

Isaac, after watching all of your stress tests on these products, I came to this exact same conclusion myself. Honestly what does it hurt to double the waterproofing protection while you are building the shower and all is open. Bc if there is a problem you have to rebuild the entire shower again. So even if you are using an extra $100, it makes more since than wasting a couple thousand in a call back. You are a great guy and contractor for being humble enough to show your mistakes and how to make it better my hat is off to you sir bc we are far and few between. I often come behind bad contractors to fix their mistakes. I am always looking for a better way and new products, thanks for all the awesome information, you are helping me be better at my job! Baker Improvements LLC, Groton, CT.

[@gunslinga7077]

Guys are badass squeezing in the deck mud pan float , and the wall floats foreal that’s badass . takes me and bro a day to prep . No floating on the walls and the pan . We just use the shhcluter pan

[@philsutton1632]

I just had my shower done in my new house. I hope he did as good of a job as you do. I will be checking it out tomorrow.

[@philsutton1632]

I am worried. I have not had very good luck with contractors.

[@barbarathomas1808]

Isaac, I appreciate the time and effort you put into your videos. Your testing of the different waterproofing products has been an eye opening ...Many Thanks...I live in Regina, Sask.Canada. I was able to locate a local supplier for Ardex products and picked up some Ardex 8+9 today..bit pricey, but I trust that it will pay for itself. Would like to wish you, your family and community wellness, especially at this time.

[@jasgui3013]

Awesome video! I've been using Kerdi for a few years, no call back so far. I like the idea of Ardex 8+9 coating for additional protection. I will defintely use it on my next bathroom project.

[@torkdork69]

Batta Bing!!!! Nice Work. About to get back in the flooring saddle. Good to watch a few of your videos just to re kindle the flames of the artisan.

[@jesseaguilar3421]

Enjoy watching video and love your positive outlook. Great to see thanks

[@tbreezzy9162]

Thanks for looking out for the glass guys dude. Im down in Napa doing showers and appreciate the tile guys that look out for stuff like that

[@marttionermaa3732]

Schluter has changed their wording . . . water management? Due to exposure by qualified professionals like yourself who have done extensive research and learned a few lessons. Thanks again for sharing your wisdom and experience. Be blessed!

[@BillSW]

a wonderful video for others to learn. your a great coach and can see your pride of accomplishment. your positive attitude will inspire many others.

[@ranger2316]

Oh ... for a new set of knees and a back! Thank you for doing this! Excellent video and narrative.

[@V8charger1]

Your work is amazing. I watch a lot videos and wow. Never seen anyone as good with tile showers as you.

[@amunderdog]

Interesting channel. Thank you. I would like to see an linear/invisible drain with no entry curb system.

[@cbastardo1971]

Awesome video! One tip recommendation I learned over the years is when you glue abs or pvc together, once you press the glued fittings together, turn it a quarter turn to make sure glue spreads evenly between the connections. It just ensures a better seal and less chance of air trappage or separation.

[@maxgilbert18]

It's illegal in most jurisdictions to glue abs and PVC together even with the transition glue. It will not hold over time. In my jurisdiction you are only allowed to glue abs and PVC together at the junction between an abs septic tank and PVC home plumbing system or vice versa. All other applications require the use of a rubber clamp coupling.

[@jimbobsmith2496]

@@maxgilbert18I don’t think you understood what he said. His statement is ABS to ABS, or PVC to PVC, not ABS to PVC. Any plumber knows to give the fitting a little side to side twist to get everything to mix evenly

[@maxgilbert18]

@@jimbobsmith2496 Your right. I must have read that incorrectly.

[@Spc_Garza]

I love painting and doing flooring and tile work

[@vincentrepettojr.7569]

My dad and I have 40+ years experience (east coast) and do old school wet bed. Always build curbs out of wood then wire, cement. Always use durock or permabase board (cover screws with thinset and tape seams). First coat of cement, pvc pan 6” up, second coat of cement, and everything gets 2 coats of red guard. Takes time but it sure does work

[@vincentrepettojr.7569]

Also, you mentioned the glass door guy screwing through the curb. That’s a big no no. Those screw holes will leak over time

[@caruana133]

Hey Issac. The reason it flakes off is because when you pound your deck mud to much you actually bring a large portion of the water to the surface. You pound the the granular to the bottom and bring to the surface the water. Thanks for what you do brother.

[@joev1848]

This guy is the man ! Love his vids.. keep doing what you do..

[@Canadian_nomaD]

Awesome video bro!! I learnt allot from this one. I’m starting to float out my pans instead of using schluter. Smart idea on the curb. I have a sheet of 2” and it’s been sitting forever lol

[@johndooley9003]

I worked in the trades most of my life and was never out of work in good times or bad

[@nothingnew69]

Have you tried to get inside work this year.....

[@Pedro.Chapps]

Wish i felt as energized on a Friday :D Great vid and really helpful info. Im doing a shower pan like this soon for a Friend,. In Ireland we have precast trays on 99.9% of jobs so very rare do i get to do this kind of work. Again thx for taking the time to make our job easier when try to figure this shit out,.

[@nicksimms9577]

Inside corner mud knife saves so much time when doing inside corners..

[@nicksimms9577]

@@skiprope536 ... because they mud one side of the tape, let it dry and mud the other, or they sand out any imperfections when they use 6 inch mud knives on both sides.

[@russellwright9418]

@@nicksimms9577 I hate inside corners or outside corner knifes doesn't work for me.

[@nicksimms9577]

@@russellwright9418 there deffinatly is a learning curve, I dont like using them with plaster or joint compound, but I really like them for waterproofing inside corners. I like to use a 6 inch mud knife to apply thin set, corner trowl to spread it out, apply fiberglass tape and smooth out again with corner trowel no bubbles and dont have to do the awkward dance with two 6 inch knifes. Also its fast enough that I can use speed set and ardex 8 and 9 emediatly

[@russellwright9418]

@@nicksimms9577 Solid info that's next thanks..

[@mikeunt44]

I like this system, looks full proof, nice job.

[@ScalpingSATs21]

Hey Isaac. I just found your channel today. I'm a contractor in Alabama and I do a lot of tile work. I've enjoyed watching your videos today.

[@williamdoeland7948]

Hi , here in the Netherlands we compact the sand cement mixture thIght but add a plasticize aditive like Ardex E25 to the mixture for the bonding and top strenght. Also mechanical mix all your mortars and thinset. Great video's btw

[@wallacegrommet9343]

Great idea. I roll it on after the deck mud placement is complete.

[@xIBLeeK]

I agree that the building trade is a great place to look for work and it can be difficult. But honestly its not for everyone. Most of the guys just want to make quick money and never learn anything. Ive been in the construction business since I was a boy and its tough and you feel like quitting sometimes. That passion keeps you going forward and once skill kicks in, everything becomes easier. Seek your passion.

[@qhpainters]

Man you really did it the way it’s suppose to be and beyond!! I never seen or even thought about putting thinset between the floor slab and the mud so it can truly bond!! 👍👍👍 awesome job I gotta check out some other videos on you

[@EddyFlexy]

what an awesome job! I like how you used Schluter but modified it to make it waterproof.

[@davidkilpatrick3689]

Did Schluter 2x becuz customer paid for it,but I used Schluter All set and Tec Power Grout.

[@larryjohnson150]

I’m glad to be finally be in a place like Isaac where I don’t dread going to work every day, it took me a long time to get here but I’m working as a gunsmith in a super high end shop with a very professional work environment. Some people seem to be able to work a million hours at any job no matter how crappy or boring the work is but for me factory work and jobs in corporate environments drove me friggin crazy. Anyways figure out how to do what you love!

[@davidharmon5112]

Love watching your videos . Learning a lot as I am about to tear out my tub for a shower because having knee replacement surgery soon.

[@jeffconley819]

That was an excellent video. Man I learned a ton. You talk about getting into the trades. What about for older people..like 60.

[@cdean3140]

You did a beautiful job on that shower Isaac! It's like watching an artist at work. Also, it's great that you're encouraging people to get into the trades, especially youngins. It's so rewarding to have your own business and know that you're doing a great job. (P.S. if you can recommend a shower install / tiling expert like yourself in Los Angeles please let us know, thanks!)

[@dr.m-beenzunamwiinganakazw9106]

Thank you for your DIY. You neat. I used cement thin set... Was too easy. Next time i will try your procedures.

[@image662]

God bless you continue to do what you love and help others!!!

[@donovanlucero380]

John Roberts taught me how to glue the first layer of 2” K-board curb down to the floor and use it as a screed when mudding the floor. Let the 2” mark ride all the way around the shower floor. Once you are done screeding the mudbed, clean up your single layer 2” curb and glue your second 2” curb on top of it.

[@frederickj.rileyjr.4072]

You're an amazing craftsman/artist. I have a suggestion to try a hook blade in your utility knife for cutting products in place due to any scratches that can possibly compromise the integrity of the flange or underlying liner.

[@arjaurigue]

I've been looking for this EXACT kind of walkthrough. Its perfect!

[@crlynmrls]

I love love love the trades and diy rehabbing

[@mountainlife1985]

Thats a clean install. Super helpful information. Thanks for the detailed clear instruction.

[@thuglivintv824]

make a section where you talk about estimates and how long a job takes to complete. No tile guys talk about that ! Thanks for the knowledge coach

[@clownworldpa2590]

I agree with you 100% If you don't like doing this type of work.. get out and do something else.. So many people out there that give people a bad name... I got 23 years experience in the home repair/remodel scene.. and I love it. It doesn't seem like a job to me. It's more fun.. (except for painting ! I hate painting.. good thing I have 2 on the ready for those days). But looks great.... Always like to watch and see how others do their work.. I know my way is not the only way... (Not hard headed) Thanks for the video.. P.s. ya missed a spot

[@HD-rn7kn]

Great job I do enjoy the job as well and learning new ways to improve my work 👍🏼

[@GarDog54]

I love it brother!! You are my coach!! Above and beyond! Sleep well at night

[@greenbowlpacker3462]

I enjoy your videos. Tile contractor in Eugene Oregon. Keep up the good work! 👍

[@joemarshall712]

"The quality of a person's life is in direct proportion to their committment to excellence, regardless of their chosen field of endeavor." - Vincent Lombardi. I started out as a plumber in the Air Force over 40 years ago and learned from the old school guys. Thanks for advocating for the building trades. Nowadays you can make a real good living and if you're good at what you do, word gets out and you'll be more valuable than gold. Thanks for a great video. I've been on the fence of how I'm going to do my shower, whether to use a pre-formed base or not, but after watching this, I'm confident that this is the way to go. If you were to do this over a second floor bathroom, would you lay down a 1/4" sheet of cement board on top of the plywood sub-floor before the dry-pack?

[@seanmellows1348]

Good stuff. Redundancies make me confident too, I typically used redguard on schluter seams in the past. Recent years, I’ve been relying on my skill with the product, so I’m interested to note the change in wording (water management). Maybe I should go back to my old ways.

[@conradszymkowicz7152]

Great, thorough, well expressed and illustrated. Thanks so much!

[@marceltheroux210]

You did a great Jonah and I would like to thank you for your directions and that you gave step by step detail u have helped me to give it a try lol.🇺🇸💪🏻🙏🏻🇺🇸

[@gusbus9119]

. . . and this is how you waterproof a waterproofed system 👍

[@johnwallace1729]

Nice im digging tile work ,you rock bro