"One of One" Custom Scotty Cameron Newport

[@FlagstickPutters]

You were a huge inspiration for me to get into putter refinishing. I refinished a couple over the last month or so and pretty proud of myself for how they came out!

[@igolf906]

Update: Thumbnail has been changed to its CURRENT paintfill colors 🤩🤩🤩🤩 My next goal is to get to 5000 subscribers!!! I know it may not happen but lets see if we can do it before the end of this year!! Also, any new project ideas feel free to shoot them to me! Always looking for new things to try! Thanks for your support!!! Also, was told the music in this video was Royalty Free. KZbin doesn't think it is so, am in the process of a muting it in the video. Sorry if that takes away from the quality. If so I may reupload later.

[@micahbrown4431]

Best of luck reaching 5k! And as for the music it's no big deal, gives me the option to listen to my own music haha

[@ryanbeveridge4167]

All ur favorite parts in one putter! Very nice. The wrap looked like it turned out good!

[@igolf906]

Thanks!

[@kenmykietowich3625]

Nice work! The black shaft was a nice touch

[@igolf906]

Thanks!

[@EFreeman1970]

I love the updated paintfill! What size tap and die did you use for the button back screws? What size drill bit? We’re the screws a special order? Thank you

[@igolf906]

Screws are 6/32 - 1/8 buttonheads. Ordered through McMastercarr.

[@mrosaine]

This is beautiful!

[@igolf906]

Thank you!

[@micahbrown4431]

Unreal man! Great job on this one.

[@igolf906]

Thanks!

[@hjchoe6192]

Love this!! I am wondering if you treated the face of the copper plate in a special way in order to prevent the color of the plate from changing? because the color of copper face turns dull as time goes.

[@igolf906]

It actually darkens. And no there's no coating on it. I like the raw feel of the copper itself and the character of a copper patina makes it stand out over time. But if your bothered by it there are solutions out there that will clean it up.

[@EFreeman1970]

Dude, amazing! Cool idea too!! I really like the welds on there. Now I want to put a long plumbers neck on my Jet Set Newport 2+. I need a good machinist

[@igolf906]

For sure!

[@jonaspareja]

These were some of the worst models in the last 10 years IMO! You made it more desirable!!! Great work my man!!! 🙌🏽😍🔥

[@igolf906]

Thanks. Nothing better than a solid copper face in my opinion. That's why I used this model.

[@jonaspareja]

@@igolf906 What’s the name of the epoxy you use for the shaft? And where do you get it from? TIA! 🙌🏽

[@igolf906]

@@jonaspareja It's Brampton Pro Fix. Can get it anywhere online.

[@홍순호-f8y]

It's great. I'm curious about the bolt size

[@igolf906]

They're 6/32 - 1/8

[@kramerdesignco]

I dig it. Are you considering picking up a welder for yourself? Maybe even a mill, down the road?

[@igolf906]

Thanks. And probably not. This hobby turned into a part time job for me, so after I start taking putters in again late Fall, I will be taking it easy. Probably only take them in small batches. No plans on expanding. Plus I like the opportunity to work with other guys in the industry and support them with the custom work I send them so, it's a win win.

[@igolf906]

With that said I do have a mini mill. In its current state not able to properly face mill but with some modifications it could easily do it. Not sure if I will ever take that on because I'm not experienced. And I definitely don't want to be ruining peoples putters. I don't have the welder to fix it 🤣

[@adamwhite1552]

What kind of wheel do you use to get the imperfections out of the putter?

[@igolf906]

It's a convolute/unitized deburring wheel. Check my description for links to all the tools I use.

[@kall3467]

Think you found a big enough hammer?😂 Great work as always man, I am kinda curious why you went with a black wrap instead of just getting a black shaft though... As for future projects, I would love to see you do an old school bronze anser putter. Do something modern to it like have the face milled, but keep some of the dings and dents to give it character. 😊

[@igolf906]

This is my personal gamer, and I had a few shafts laying around and one Black wrap left so. Otherwise probably would have got a KBS CT Tour like my last one. And good idea! An old bronze PING has always been on my mind.

[@kall3467]

@igolf906 I just picked up an old anser a few weeks ago for posterity sake and I gotta say, I like it. Not as much as my piretti, but I like it. 😆 I soaked it in vinegar for a couple of days to get it back to more of a natural color and that's good enough for me.😉

[@boschlotz]

The applicator for the black paint fill...is that something you purchase on Amazon? I have been using cheap ones and the needles pull out, inconsistent paint flow or basically just pieces of crap! Any suggestions would be appreciated...

[@igolf906]

Gaunt Industries. They allow you to build your own custom applicator tools.

[@trevorj6463]

You do such great work!Keep it up!!

[@igolf906]

Thank you so much!

[@darraghgubbins9653]

Hi how would too recommend doing this at home with just sandpaper and a Dremel and polishing kit

[@igolf906]

It can be done. But honestly with out a glass bead blast, you will never get this type of finish.

[@valderja]

Is it face balanced with the shaft in that position or still a bit toe down?

[@igolf906]

It was a few degrees toe down

[@drew2180]

Great work! What did you use to wrap the shaft? did the weight change drastically with the movement of the neck?

[@igolf906]

Its a wrap from ShaftWraps. And it essentially turned it into nearly face balanced so if you're talking swing weight I'm sure there's a slight difference. I also swapped out the weights for 5 grams. Wanted a lower head weight so it's currently at 315 grams.

[@aaro8365]

What was the tape that u used to make the shaft black?

[@igolf906]

It was a wrap from Shaftwraps

[@BJK13]

Here's a couple questions. What Guage needtip paint bottles do you use? Have you thought about getting a milling machine to do your own faces? This was so awesome. Love your content!!!

[@igolf906]

I believe they are 20 gauge tips. And no, it wouldn't really be cost efficient for me, as this is just a hobby of mine, and space is currently limited.

[@DooterEMT]

What size Allen wrench is it to take the insert screws out?

[@igolf906]

.05"

[@TheFoz1983]

A carbon steel head getting a hot black oxide finish would be cool to see fit a idea. Not sure if you can do that just a thought. Great work

[@igolf906]

I've contemplated trying out hot black oxide. Not many people offer it so it would be something I'd definitely look into!

[@mangakcg]

how do you maintain the copper so that it doesn't tarnish?

[@igolf906]

Personally I don't. I like when it tarnishes. Just adds character. But simple mixes of lemon juice and baking soda will take it off. Or white vinegar and salt. There's a few ways.

[@frog222100]

@igolf906 what kind of vhb tape do you use?

[@igolf906]

5908

[@boschlotz]

How do you get that paint fill so smooth?? Looks great...

[@igolf906]

Sometimes use alcohol to line the dots helps. Otherwise you see in the video I use a small torch that you hit it really quick and gets rid of bubbles and smooths it out.

[@boschlotz]

@igolf906 That makes perfect sense. I actually missed the torch part, so I will need to watch it again.

[@Wavez41510]

Why you cut it off and make a center shaft putter?

[@igolf906]

Thats what I wanted. And I didn't like the center shaft options that Cameron offers.

[@ericstuckey7620]

Where are you located?

[@igolf906]

U.S.

[@ericstuckey7620]

@@igolf906 what state, I’d like to you my Scotty. Do you have a email , I want to send you a photo?

[@Dadmoves49]

👎🏼 for no audio

[@igolf906]

I had to be muted. Music was suppose to be royalty free.