Onkyo TX-SR706 Sound and Video Fix

How to fix a no HDMI video out and buzzing sound out of the speakers.
Capacitors - amzn.to/49IWt0d
Flux - amzn.to/3LRPwj3
Solder - amzn.to/3HT2GeA
Solder Gun - amzn.to/3BaUu5B
Audio Fix Link - • Onkyo TX-SR806 Digital...
Video Fix Link - • How To Fix the Onkyo T...

[@Francis7Music]

Really useful video! Those caps aren't available anymore, though. Can you recommend others? I've never done circuit board work, only audio cabling and the like, don't want to mess it up. Thanks!

[@PostalRedneck]

Thanks. I updated the link to the same caps. I highly suggest getting good flux it makes it way easier. Heres the link to the caps - amzn.to/49IWt0d. Good luck and hope you have success.

[@Francis7Music]

@@PostalRedneck you're the man!

[@PostalRedneck]

NP. Its not a hard job and you can find these receivers every now and then on the market place with the same problem for cheap. I have done 2 of them now and have the one I fixed in the video hooked up to my living room still working great and the other one is out in my garage for jams.

[@MarlonBrndo]

That was a beautifully done job my man. Would I be able to purchace the whole board these days? Would you be able to restore my Onkyo TX NR-818 with a new board and or better caps? Thank-you

[@PostalRedneck]

Thanks. You could always buy the stuff needed to fix it and bring it to a shop to have it serviced. I dont know if you can get a new board for these anymore with how old of a model they are.

[@mannysalinas9349]

Quick question what was the Flux for ? Did you use it ? im having the same problem with mine

[@PostalRedneck]

Flux makes a huge difference in how easy it is to get the solder to ball up on the pads and wire. The better the flux the easier it is to work with. I use that flux any time I solder.