SCRAPED RENDER good money but hard work

Want me to show you how to fully leverage social media and Google to bring in so much work that you'll be begging me to make it stop?
hit the link
👇👇👇👇
onthetrowelcoaching.carrd.co/

[@Michael-di5cl]

wow kirk,im a plasterer but ive learned so much from your vids,i told my mates and an apprentice,its like having a mate while watching you,your so generous with your knowledge,i remember when laboring you darnt watch the plasterer at all because he would just stop work and ask what you doing? nice one keep going strong kirk.

[@user-qd5wm6ql1v]

Spot on pal

[@peterhaigh5764]

Great as always Kirk!

[@AlanOliver20]

When we do scratch render we always use weber mono throughout the whole process? No scratch coat with a different product. 10mm first pass 8mm second all same day. Interesting to see it done a different way. Definitely less air pockets and sag doing it your way

[@stevemagoo1980]

Lovely job mate. Great tutorial 👍

[@rockroll456]

Spot on Kirk I’ve seen a lot of jobs using mono and not use a base coat just use the top coat if that makes sense keep up the good work 💪🏻💪🏻💪🏻💪🏻

[@Itisinthehand]

Good teacher. Inspiring. I'd do that now.

[@spencerda1anonly]

Shown as it should be awkward areas an all. Top job 👍🏻

[@rickirosier7503]

I’m a plasterer never touched K rend but ur tips are very helpful m8 and u know a lot about the game nice fella good luck m8

[@Ash-gg2ql]

Amazing videos mate, sat watching on a Sunday night, well chilled, top bloke 👍🏻 keep up the good work 👍🏻👍🏻👍🏻

[@angejordan3064]

Great video as always. I enjoy your videos no matter the content with your personality 👍

[@lmilne4859]

Super job

[@MICHAEL-wg2lh]

Belter vid Kirk , cheers mate 👍

[@paulwilliamson6373]

Great job Kirk

[@waterboy8999]

Nice work

[@patricklynch236]

Great video mate👍🏻

[@Boxingfanatic-fb8zg]

Great video...Good man

[@ronniebarker79]

Cracking content captin go and grap that pint youve earned it buddy

[@Onthetrowel]

Cheers ron

[@frank__rizzo848]

I've been watching a few of ur videos. mate, the way you work is exactly the way I work too. I've been at it since I was 8 with the old man, now I'm 40. id have aright laugh with u. Last of the old skool pal. Bath n rake days haha! proper graft.

[@michaelwarnick5100]

Nice dose of accelerator matey. Time for quick bite then scrape away. Home by 3 . 🎉

[@SimonVerrechia]

Top video, content and skills 👌

[@ladgolf6330]

Watched a bunch of guys render a villa I was working out in Spain in Monocapa Kirk. 5 of them turned up in a Vauxhall Vectra and piled into it, 2 mixing, 3 applying - they had buckets of the stuff ready to go on the wall - base coat with fibreglass mesh, then top coat - they worked their nuts off mate.. On the last day they needed a bit more gear to finish the job off, so when they arrived, they had a few bags in the boot of the car and the 3 lads in the back seat were sat on 4 bags of render...🤣 You could always tell which houses were built by dodgy builders as the evening sun would cast some horrific shadows down a poorly rendered house. Imagine doing that when it's 35 degrees though - no thanks..

[@fatwalletboy2]

Dunno why but thats reminded me of Auf Weidesehen Pet at Ali's villa!

[@simonstorey5258]

EXCELLENT PLASTER WELL EXPLAINED

[@richardpowell9238]

Awesome work Kirk, did you do a video on the scratch coat too? I do miss some videos your post and do try to catch up but self employed with kids it's hard to find time

[@rubikasuto]

Huws gray nighties killed me laughing, my 3 daughters always got my freebies from the builders merchants and worn it as nighties 😂

[@allenmccormack24]

Immaculate

[@jasonappleton3976]

Brilliant job lads, very detailed video keep up the good work, I was told give it a light brush off with soft broom, didn’t notice u do it in video is this right or wrong , cheers Kirk 👍🏻

[@blackesteyes1133]

Always brush down with a soft brush afterwards.

[@TheWinaboy]

Hi ya mate can this k rend go over an sand and cement rendered bay if so would you have to prepare in any special way?

[@Michael-di5cl]

was that on top of a waterproof scratch coat kirk?

[@gorringeman]

Lovely job mate looks wicked, one question though - As you achieve a level surface by scraping how do you know 100% you don't have any low spots?

[@Onthetrowel]

You can tell by the texture where has been scraped and where hasn't mate

[@markrobinson1458]

You've got it all over the window 🤣🤣🤣🤣 ,👍

[@Onthetrowel]

Watch all the way to the end, we just clean it off. 🙈🤣

[@markrobinson1458]

@@Onthetrowel I know, I'm just having a laugh after you mentioned it at the beginning 😂 👍

[@kaimichael5444]

Hi pal get yourself a machine loads easier quicker etc. Stunning as always

[@karlsklips3268]

no need for using a mesh with the K-rend?

[@Cepcep77]

What did you put the beads on with bud?

[@Onthetrowel]

Base coat mate

[@jaimehewitt365]

Get on the tc15. So much easier and better looking in my opinion.

[@jamie.840]

An never used modern bagged render av used sand and cement. the bagged render looks much better to use

[@careerstreet]

What colour render is that mate? Class job 👍🏻

[@Onthetrowel]

It was krend polar white mate

[@ivelinaminkova2646]

so no need to wet the wall before sticking the render on?

[@Onthetrowel]

Depends on what type of rendering your doing. With this there's no need mate

[@johnharvey3627]

Hard 2 beat the Steel trowel 🇮🇪

[@rustybrownstein8985]

Don't get me wrong you're a top bloke and that's a cracking job.... But where are the sheets to collect all the crap that's falling on the floor. Oh and you got some on the window 😏

[@Onthetrowel]

Ground is getting landscaped mate and it was only a little job so we just cleaned the windows as we went

[@rustybrownstein8985]

Just pulling your leg 😜 👍

[@rustybrownstein8985]

Just out of curiosity. Can someone explain why these new continental rending systems don't use bells above doors and windows. The UK is probably one of the wettest countries on the planet!

[@Onthetrowel]

We no longer have wooden window frames so it's now more of a case of aesthetics

[@rustybrownstein8985]

Thanks for the answer , I've learnt something new today. it makes sense now you've mentioned it 👍

[@DavidSanchez-ot3it]

Why didn’t u wet the wall first sir ?

[@drm6089]

Wouldn’t touch the stuff Kirk i like lime render myself

[@alokhan3622]

You wanna be charging your t shirt for adverts

[@joey200867]

3 coats 😂 scratch and two over the top ? Not needed

[@Onthetrowel]

OK cheers mate, have a lovely day

[@chupapi3510]

Always wanted to be a renderer, but my IQ was higher than 10.

[@Onthetrowel]

This comment makes me think otherwise

[@jasper8252]

Could you pva it to help with the dried edge

[@carld9451]

We thought that the k render was the dogs bollicks years ago now I carnt stand it the mess the scratching back and if you don't get the timing rite to scratch it back ye fkd all so the waste on it you must loose a bag out of 3 plus putting it on is a nightmare its very messy no more k render for me now its the silicone render a lot easier thank fk

[@Onthetrowel]

I feel your pain mate, I'm with you

[@lloyds053]

Got that done on mine, looks far better than scratch coat, a neighbour got theirs done same time as mine an theirs looks like it's been on for years an looks shite when it rains, silicone thin coat all day out of the 2

[@plipertyplap4899]

Any illegal immigrants watching THIS IS CALLED WORK 😡🤬🤬🤬🤬🤬

[@richardharries5825]

Not being funny ? but Any illegal immigrants as you know cannot walk into your local job centre and apply for work. But all I do know is there are plenty of them that are prepared to work. Unlike some of the druggies in the uk that just want their drugs and that’s it. The illegal immigrants are probably watching. And ready to practice having a go at it. Plastering is not easy to do.

[@MartinBuchanan-zs4fw]

Your supposed to do your scratch in straight lines mate, juat saying😅

[@Onthetrowel]

Straight lines, waves and diamond criss cross, all have different uses for different things mate. I specifically wanted waves on this job for a specific reason 👍🙂