Can you add a link for the upgraded rear axle and belt upgrades. Loving this build! Thank you!
@danielemulazzi16156 ай бұрын
Spettacolare... ciao dall'Italia
@rcprinter6 ай бұрын
Ciao e grazie!
@FIashOOT6 ай бұрын
Great work, 3d printers are really awesome
@rcprinter6 ай бұрын
Agreed!
@69fulmine6 ай бұрын
Ciao, davvero bello è soprattutto bravo !!
@rcprinter6 ай бұрын
thanks!
@ВячеславСидоренков6 ай бұрын
Very cool! Thank you!
@rcprinter6 ай бұрын
Glad you liked it!
@charlesyoung86006 ай бұрын
SO NEEDS A NITRO MOTOR!!!!!!😂
@rcprinter6 ай бұрын
That would definitely be more realistic
@jeremyyounger54426 ай бұрын
Great work any chance you could do a Forklift?
@rcprinter6 ай бұрын
That would be fun!
@kjkareemslim4 ай бұрын
BAD ASS ? WHERE CAN I GET THE MOTO AND PIPE
@sandofpv97196 ай бұрын
I recommend you watch these videos;Go-Kart 3D Printed RC and Go-Kart 3DPrint 2 of my channel in one I learned the difference between TPU 84a and normal TPU apart from modifying the design several times to get more control of steering wheel turn, I also designed a helmet and a custom articulated dummy that also moved the head by means of a servo, in the helmet he has a "gopro" with a custom hole to put an FPV camera, I would like to see your version of the rider, of tires, see you try the FPV and finally I recommend a Gyro is the difference Nowadays my kart is very different from how it was proposed, and I have learned a lot about steering, geometries of the RC world and settings apart from designing in 3D and adjusting the printer
@mc3dprintsАй бұрын
question. you show 2 different 3d printed rear axels. the one I printed off of Printables seams to short. Is there a different one I should be printing?
@thegamingfox52313 күн бұрын
I think ThingsIVerse has the bigger version.
@irvine40Ай бұрын
Would like to build one. Can’t seem to find anywhere the print settings
@rcprinterАй бұрын
Yeah it can be a bit hard to know what to use and the instructions for this build aren't great. Generally when printing these cars I use a standard 0.2mm layer height and standard infill % or maybe a little higher for body and cosmetic parts and then I increase the number of walls for any parts that I think should be more resilient such as drive train and steering components. For some of those I might even increase walls until those parts are completely filled with plastic.
@djserafin6 ай бұрын
where did you get the wheels and tires?
@rcprinter5 ай бұрын
Tires: rcprinter.com/products/f104-tires-for-openrc-f1-front-and-rear I used the original openrc f104 wheels for the front and made my own rears with 14mm hexes. If you check the facebook group I think there's options posted there for wheels for these tires as well or you can go with any f1 RC wheels with 14mm hexes.
@chribrian5 ай бұрын
Where did you find a 16t pully with a bore that matches the brushed motor ? Closest i can find is 4mm.
@rcprinter5 ай бұрын
I used an adapter sleeve like this: www.aliexpress.com/item/1005006877696942.html
@Poulpc6 ай бұрын
Nice video
@rcprinter6 ай бұрын
Thanks!
@kjkareemslim4 ай бұрын
? how much for you to print the parts for me. my printer not working at the moment
@MCsCreations6 ай бұрын
Brilliant work, dude! Really well done! 😃 Now you need to 3d print a pilot! How about a... Mario? 😬 Anyway, stay safe there with your family! 🖖😊
@rcprinter6 ай бұрын
Thanks Man, Mario is a great idea!
@stevenhunter76196 ай бұрын
Please provide a link for the wheels and tires. Thank you
@rcprinter6 ай бұрын
The tires are the F104 tire option from the openrc F1 car with 3d printed rims: rcprinter.com/products/f104-tires-for-openrc-f1-front-and-rear
@stevenhunter76196 ай бұрын
@@rcprinter what about the link to the rims please. Also noticed a few have asked about the air filter on the motor. This looks awesome and finishes off the engine perfectly. Can you please provide a link for the air filter. Love your work, thank you and I will have many hours of fun with my new toy!
@ripmax3336 ай бұрын
What wheels/Tires did you Use?
@thehydroblade6 ай бұрын
Yeah, they have a mold parting line down the middle, so probably not printed.
@rcprinter6 ай бұрын
The tires are the F104 tire option from the openrc F1 car with 3d printed rims: rcprinter.com/products/f104-tires-for-openrc-f1-front-and-rear
@thehydroblade6 ай бұрын
@@rcprinter Cheers!
@thehydroblade6 ай бұрын
Please mount a GoPro camera in the seat for an amazing FPV video!
@rcprinter6 ай бұрын
That would be cool!
@akshajabhay6 ай бұрын
Could you please provide the gear ratio and the motor specs...
@rcprinter6 ай бұрын
I used this brushed motor/esc combo: rcprinter.com/products/540-motor-60a-esc-combo-kit . You should use a 16T pulley and the 3D printed belt drive gear has somewhere around 70 teeth I think.
@christianerazorecalde40886 ай бұрын
Thanks for uploading this video. Is it okay for you if I put a link into the files on printables? I hope you enjoy the Kart :-)
@rcprinter6 ай бұрын
Yes for sure! Thank you so much for all your work on this project! I found that the files for the project on printables were less complete than the ones on thingiverse which is why I put those ones in the description.
@VrhoAirlines6 ай бұрын
What is the scale(size) of GoKart?
@brysonturner28519 күн бұрын
I think it is 1/10
@divadonroda56 ай бұрын
Where you get the drive belt.
@rcprinter6 ай бұрын
amazon: www.amazon.com/dp/B0CM6RSR6Z
@IlicIlija5 ай бұрын
What 3d printer are you using?
@rcprinter5 ай бұрын
Prusa i3 MK3S
@IlicIlija4 ай бұрын
Thanks you😊
@kjkareemslim4 ай бұрын
I SEE YOU DONT HAVE THE PIPE HEADER IN THE FILE
@FarmerFpv6 ай бұрын
Belts are less efficient than direct-drive gears. No need to use a belt since you are not using a jackshaft.
@toepunch0016 ай бұрын
Where’s Mario for it?
@rcprinter6 ай бұрын
future upgrade for sure
@futurizonfr33686 ай бұрын
A real karting has a tubular chassis, it would have been nice to do it in 3D printing...