Our business changed our lives / Home Business Ideas

In this video we are going to talk about how our business changed our lives. We will also talk about the equipment and materials you will need to start this type of business. If you are looking for small business ideas or you just want to make some extra money from home, you should consider investing in a vinyl cutter.
Get your equipment & materials through uscutter: uscutter.com/?ref=StickerAfic...
Or through Amazon:
Graphtec vinyl cutter: amzn.to/3pIrIkS
USCutter Titan 28 inch Vinyl Cutter: amzn.to/3yC1jwn
CAMEO 4 (12 INCH): amzn.to/3dPBRvA
CAMEO PRO (24 INCH):amzn.to/3POgbNO
Oracal color guide ( only for 651 & 631 vinyl ): amzn.to/3W6Q0ow
Siser color guide: amzn.to/3ZuQJ60
TRANSFER ROLLER TAPE:amzn.to/3e1yYb3
Magnum magnetics 24"x25' : amzn.to/3P6AHdJ
Blank yard signs: amzn.to/2IBiGWM
RAPID TAC: amzn.to/37ZMl5O
Oracal 651 vinyl 10 yard roll: amzn.to/3ulmXRJ
Cutting mat: amzn.to/3uidBWZ
Blue safety ruler (31 inch long) amzn.to/3slsrKy
Squeegee: amzn.to/3bmZK8Q
Small magnets to hold vinyl in position: amzn.to/3kdE6bt
Cutting knife tool: amzn.to/3sbDTYS
Adhesive remover goof off: amzn.to/3eXrNS2
00:00 Introduction
00:13 Equipment and materials needed
02:40 How our business changed our lives
04:17 Cutting our vinyl
08:42 Weeding out
12:24 Layering vinyls
16:48 Applying decals
24:10 Tips before starting your business
24:59 End result

[@RDIdecals]

Get your equipment & materials through uscutter: uscutter.com/?ref=StickerAficionado Or through Amazon: Graphtec vinyl cutter: amzn.to/3pIrIkS USCutter Titan 28 inch Vinyl Cutter: amzn.to/3yC1jwn CAMEO 4 (12 INCH): amzn.to/3dPBRvA CAMEO PRO (24 INCH):amzn.to/3POgbNO Oracal color guide ( only for 651 & 631 vinyl ): amzn.to/3W6Q0ow Siser color guide: amzn.to/3ZuQJ60 TRANSFER ROLLER TAPE:amzn.to/3e1yYb3 Magnum magnetics 24"x25' : amzn.to/3P6AHdJ Blank yard signs: amzn.to/2IBiGWM RAPID TAC: amzn.to/37ZMl5O Oracal 651 vinyl 10 yard roll: amzn.to/3ulmXRJ Cutting mat: amzn.to/3uidBWZ Blue safety ruler (31 inch long) amzn.to/3slsrKy Squeegee: amzn.to/3bmZK8Q Small magnets to hold vinyl in position: amzn.to/3kdE6bt Cutting knife tool: amzn.to/3sbDTYS Adhesive remover goof off: amzn.to/3eXrNS2

[@ot9355]

You guys are doing great and honestly it doesn’t matter who sponsor you. As long as you guys are genuine about speaking what’s good for people’s business that’s all it matters. You definitely don’t need to explain yourself to the negativity that people attack you guys with. Your business is your business, nobody else’s. 💪 keep up the good work, I’m always here watching you guys for great tips.

[@RDIdecals]

Thank you for your kind words and support 🙏

[@EVILxHEMI]

For sure! Ignore those fools or ask them how well THEIR decal businesses are doing. Poorly because they don't have any decal businesses and are jealous of yours. And the ones who spew hate in Spanish? Ignore them, too. Their grammar/spelling is bad and I doubt they are as fluent in English as you guys are. No - don't waste your time on that. They aren't worth it. They don't like it? They don't have to watch. Trolls suck and the Internet is loaded with them. You guys just keep on keepin' on and do your thing! I'm ordering my first roll of transfer tape through your link today so you get credit and I will get a discount. Keep the videos coming! I'm going to practice applying vinyl to my windows at home to hone my skills! Let's see how much I've learned so far! HAHAHA! 😁

[@chiparooo]

That was a big project! Really turned out nice. I enjoy watching you guys working together as a team. Thanks for sharing!

[@RDIdecals]

Thank you very much for your support 🙏

[@milyundlrsmile]

Yall seriously need to get an eco-solvent printer! You already have the customer base for it. Your business will boom!

[@idadejesus931]

Hi guys don't let what their saying get yous down just keep doing what your doing godbless

[@thegtarpplug]

Congrats on all your success guys!!

[@RDIdecals]

Thank you 🙏 we also wish you the best for your business

[@rororania-oo1il]

I forgot to say thank you so much for your videos so much

[@RDIdecals]

You’re welcome! Glad you like our videos, thanks for watching!!

[@idadejesus931]

Great job always looks perfect thank u

[@theregoescb]

mi raza making me proud love seeing the hustle! you all have inspired me. i got my first order for 10 signs at $25 a piece for a small excavation business. using a cricut for now but hope to get enough business to grow into something bigger! thank you guys and you all have a new subscriber keep going!!!

[@RDIdecals]

Thank you Joey we wish you the best in your business 😃

[@AM-dn4lk]

Thank you for another great tutorial. I would like to see more videos on Corel Draw, drawing and creating the cut drawing from the Corel Graphic. Thank you.

[@myendurochallenge8885]

You guys are awesome...I'm thinking the same path as you and I'm following closely thank you

[@RDIdecals]

Thank you 🙏

[@Flaviodallas]

Thanks for your generosity! I really want to be on this business and you are the best reference I have now!

[@RDIdecals]

Thank you 😊

[@baffoebainn2405]

Am very happy to have come across your page. I will say mu problem is solved. I have bought XL-721 ABJ contour cutter how to set it has become a problem

[@emriktrading6207]

How you decide the price for job ? Whats general rule for sqft?

[@armani0994]

Would love some more info on how to price a job too

[@northernfinn2998]

Thank u for sharing

[@RDIdecals]

You’re welcome!

[@veronicanoble8118]

Great video I learned a lot

[@RDIdecals]

Thank you 🙏

[@carrolbrooks2143]

Just a tip, a vacuum table works really well to hold your vinyl backing pieces in place while you weed them.😉

[@RDIdecals]

Thanks for the tip! 😎

[@inkcityco]

The graphtec ce6000-60 👌

[@RDIdecals]

Yes, best investment! Thanks for watching 😎

[@TheSignGuy254]

I’ve learned a lot from you guys

[@RDIdecals]

Thanks for your kind words and support!

[@ernieRUOK]

Thanks for a the good videos guys. It’s helped me a lot. People are talking about cameo, the only other consumer brand is cricut and it’s terrible for business 🤦🏻‍♂️ people are just haters.

[@VAisForGrowers]

What abt vevor is that a good company. I see their plotters alot

[@BruceLeef]

Looks great... Do you have any videos on setting the registration marks in the software .. thanks for sharing

[@RDIdecals]

Thank you! We haven’t uploaded recently but I will leave a link to an old video, hope this helps: kzbin.info/www/bejne/aWLHkqOleLKlf5Ysi=iwxqZ-wO9OAFIN-3

[@angieramirez5642]

How do you guys charge for your jobs? By the size or yard? What if its more than one color? If you have to go their house to get dimensions or to do the job, do u charge for that too?

[@simpatiko2k5]

Are you guys Filipinos? Isn't it much safer and fastest to do is spraying the bottom layer with water and dishwashing liquid before applying the top layer?

[@baffoebainn2405]

I don't know which coraldraw can communicate with it well

[@kahcreations]

The Rtape transfer tape, do y'all purchase that from Amazon or directly from their site? I don't remember seeing any links for that in any of your videos

[@RDIdecals]

hi we get it from uscutter just search for Rtape At-75 and here is the link thank you for your support: uscutter.com/?ref=StickerAficionado

[@VAisForGrowers]

How come you have to use coraldraw then import it to the graphtec software. This is all brand new to me and I'm totally blown away by all this. A week ago I had never heard the word cutting plotter before lol so I'm truly starting at the bottom

[@RDIdecals]

Hello! Sorry for delayed response, we use CorelDRAW to vector the logo-vinyl cutters only work with vector images-and the software that comes with cutter is for adjusting cut force, speed, make copies of projects, etc.

[@sotosbrother9389]

Would you guys recommend layering the two colors before applying to vehicle ?? Or layering direct on the vehicle ?? I would think as a beginner it would be safer layering before applying to avoid mess up’s ??

[@RDIdecals]

Hello! Sorry it took us a bit to reply. I think layering vinyl before applying it can be risky as you only get one shot to layer it correctly. If you live in a warm state you could layer it directly and use the wet method, this gives you time to correct should anything go wrong. Thanks for watching!

[@MahbubTalks]

Hi, I really appreciate all the information you always share. I have a small question. I am trying to start this same business from my home. I live in the UK. My first and main concern is how do I reach potential clients as I don't have a shop and I don't know many people in the town where I currently live. Would you mind sharing your opinion, please?

[@RDIdecals]

Hello! We get most of our customers through Facebook local groups, eBay and other social media. When we just bought our equipment we used to pass the word around, in fact our first customers were our friends and their friends 😅. This worked for us. Thanks for watching!

[@MahbubTalks]

Thank you so much for the kind information. All the best to your business ​@@RDIdecals

[@rororania-oo1il]

What state are u at and how how fast did it take your business to grow?

[@RDIdecals]

Hello! We are in Indiana. The biggest growth for us was when we were able to quit our jobs and do this full time and it happened in about 3 years.

[@armani0994]

How did you start finding customers?

[@RDIdecals]

Social media, eBay, Etsy print your self some business cards and put them on any product you sell online we grew our clients thru years just be consistent

[@armani0994]

@@RDIdecals Thank you!

[@baffoebainn2405]

Please help

[@baffoebainn2405]

I wish I can communicate with uiu guys on phone or email