the biggest question when starting a tshirt and decal business

[@RDIdecals]

get RDIGOLD MEMBERSHIP to use the calculator here:kzbin.info/door/Qzy8l6-NIsBdWkB2MzE0ogjoin Use our CALCULATORS in our Website: stickeraficionados.com/rdi-decals/ GRAPHTEC PLOTTER (NEW VERSION):uscutter.com/Graphtec-CE7000-Vinyl-Cutting-Plotter/?ref=StickerAficionado TITAN PLOTTER:uscutter.com/USCutter-Titan?ref=StickerAficionado CAMEO PRO (24 INCH PLOTTER):uscutter.com/24-silhouette-cameo-4-pro-electronic-cutting-tool/?ref=StickerAficionado ORACAL 651:uscutter.com/oracal-651-sign-vinyl-outdoor/ TRANSFER RTAPE AT-75:uscutter.com/rtape/?ref=StickerAficionado TAPE APPLICATION ROLLERS:uscutter.com/APPRoller-Tape-Application-Roller/?ref=StickerAficionado RAPID TAC FLUID:uscutter.com/ACTION-TAC-Vinyl-Application-Fluid-1-gal/?ref=StickerAficionado CUTTING KNIFE:uscutter.com/avery-dennison-snitty-vinyl-cutting-knife/?ref=StickerAficionado REPOSITION SMALL MAGNETS:uscutter.com/Yellotools-Speedmag-Hd-Graphics-Mounting-Magnet/?ref=StickerAficionado SQUEEGEE:uscutter.com/siser-easysqueegee-vinyl-application-squeegee/?ref=StickerAficionado

[@joeysumma4465]

Another great video guys, learning quite a bit from ya'll. You inspired me to bite the bullet and I went ahead and purchased my first plotter - Graphtec CE7000-60. Looking to get some starter vinyl and I want to start with rolls of white, black and orange (orange for personal use). Question i have, what's the most common preference in your experience - Glossy or Matte? Thanks in advance.

[@RDIdecals]

We only have black Matte the rest are gloss colors

[@paperedpaknship7697]

Thank you!

[@stephaniemachulis832]

What's the best car/shirts decal calculator ?

[@shereenbassette5125]

Hey there, Is there another transfer tape to use with the orecal 651? Or the AT-75 is the best to use? I'm using the 651 and applying it to vehicles.

[@RDIdecals]

Depends on type of surface you planning to apply to for wall decals we use AT-60 since is a low tac transfer and we don’t want to damage the paint, the AT-65 we use it when applying on glass and the AT- 75 when apply on metal but again it all depends on surface and type project for wet application in a cool environment we recommend a low tac transfer like the AT60

[@terryw5500]

I am a little consufed of how you got the number of 8.93 when multiplying those numbers can someone explain this

[@shane46947]

Where do you live in Indiana? I'm from logansport north west of Kokomo

[@RDIdecals]

Hello! We’re close to downtown Indianapolis

[@navpreet_sidhu]

You guys are very helpful thank you. I started the business in canada but can’t able to find good suppliers You know any one in canada 🇨🇦 Thank you again

[@RDIdecals]

Hello! Unfortunately our suppliers are in the USA, we’ll inform you guys as soon as we find a trustworthy supplier in other countries. Thank you for supporting our channel 🙏.

[@VHSigns]

Do you guys take deposits for graphic design?

[@RDIdecals]

That is actually our sales pitch, we offer free estimates but when we send a sample we put watermarks to our designs but that is just us

[@terryw5500]

@@RDIdecals hi, trying to figure out how to reach out to you guys. I am confused with the math. if you are saying to mulitply those two numbers 53.6xx2 when I mulitply it the number does not come to 8.93 please expalin

[@RDIdecals]

@@terryw5500 when I said 2 I mean 2 feet or 24 inches it’s same there is a calculator in the DECAL CALCULATOR just go where it says Wanna find out how much you pay per square foot on top of decal calculator click and way bottom you will see a calculator that turns inches in to square footage just put the length by height and you will get the square footage of any design

[@terryw5500]

@@RDIdecals got it

[@terryw5500]

Now when I go to break down the square footage to know the price it isn't bringing it up. I just put in 24w 50yards and put in the price uscutter gives of 130.99 and I hit calulculat it says $NaN