Our Chevy C10 square body project gets HOT and HAMMERED!

[@RaceRebuildRepeat]

What in the HELL should we do with this C10? Comment ideas below!

[@faygoforthejuggalo]

Silver Lake trophy truck

[@Guesswho69650]

Tell me to come pick it up!! Will wing it from there. Lol

[@JameyCampbell_54]

You two idiots will never get it put back together without Dan lol

[@jamestroymurray]

Frankie needs a drag truck

[@nolimit4730]

@@jamestroymurrayI do like this comment bit unfortunately she’s to far gone 🎉🎉

[@jimetyetty4000]

I'm glad to see the subs rising, y'all deserve it

[@v4yt126]

50k subs well overdue, the quality is top notch.

[@Beezenberry]

Leo has always had the best montage soundtracks on KZbin period! Love me some TMG. Keep it up guys, you are killing it. #TMG4Life 👍 from 🇦🇺

[@obs_willard]

You two make a great show cant wait to see where this project takes off too

[@MrSelmo85]

Derrek from Vice Grip could tell ya a thing or 17 about that truck..

[@thepreciouslucy5983]

The 700R4 can be a nice transmission. Keep the TV cable tight. The early ones weren't great. They were still being used in the mid 2000's just electronic shift. If you put upgraded parts in them and planetary gears from the 4L65E they can handle some power. The transmission shop I worked at when I was young, we would put them in alot of "street/strip" cars. One that stuck out the most was a 442 Cutlass with a carbed 455 running 11s. The syclone has one.

[@Hugs-hearts-and-horses]

This truck is Pure Michigan!

[@AJ_Jabber]

Entertaining fellas, always looking for that notification for your vids. Keep at it guys!!!!!!!! Looking forward to seeing you guys do some racing!!!!

[@leonard383]

Put a big block in it.. you won’t regret it! You guys will be tickled to bits with the torque she would be putting down. Look for an old square body dually with a bigblock for a donor or an old camper that has one. Slap some good heads and a good cam in it..

[@gavindenney3365]

Tmg at its finest the c10 is a great project for you guys great watch for when you finish work ❤

[@4koffroad]

Was worried you guys were not going to post tonight. Glad you proved me wrong!! Thanks guys!🎉

[@garyg736]

I always loved the looks of those trucks Should make it into an off road rig prerunner style

[@wdchamp2389]

I'm really enjoying the mix of content

[@backfireproductions4362]

Currently motor swapping a 72 c10 with my dad, so excited to see how this turns out

[@imagri1]

13:16 made the same mistake a few weeks ago. Have the $16 puller from oreillys now and it works amazing lol

[@thmike]

700r4 is a great daily trans. Pretty easy to build.

[@RyanMayo-cb9vg]

U can put the 305 heads on a 350 it will bump the compression up to like 9 to 1 also most parts are interchangeable on older Chevy small blocks if it is a 350 u can buy a stroked crank cheap and make it a 383 which loves the revs which u need for franks heavey foot also motor size should b in the vin

[@jakekohtala3032]

Frank has to have a come along around there somewhere. Couldn't you crank the tensionon that to pull out while you're heating it up?

[@geezerracing2895]

Frank, the way you swing that hammer, you could have a strong future in Mill Maintenance!🙂

[@hunterswiski8398]

I have never liked a video more than making hammered machinery good again

[@AustinK95]

Love the mash up of content you guys are absolutely going to blow up. Keep killing it homies 🤘🤘💯💯

[@RACEIT2THEGRAVE-os]

That hilarious i have a 700r4 i had rebuilt by an old retired trans expert in his back yard ive beat the snot out of it for 5 years now still working flawlessly i think its more or less who builds the trans and what they know

[@joshuabadzinski9793]

People are building with temu parts and blaming the transmission.

[@RACEIT2THEGRAVE-os]

@ isn’t that the truth lol

[@aarongrillot5555]

Needs a 383 stroker

[@kenleppek]

Everything bolt on is the same between a 305 and 350. The heads on a 305 have a smaller combustion chamber. If that's the stock motor from that truck then it's an 87. That the only year a square body 1/2 ton pickup got a TBI motor. 86 and older are carbureted and perimeter bolt valve covers. Those are center bolt.

[@mikemccabe7124]

the 700r4's are a decent transmission once you throw a few upgrades on it.. if you install a corvette servo and pump kit which can be got round $350 from different speed shops like jegs and summit and throw on a 2200-2500rpm stahl converter so still streetable or get cra cra with then like a 3k rpm stahl but I'd keep the 700r4 save you money plus with the corvette stuff installed it'll suprise you how much u can control the shift points plus with that overdrive it'll make cruzin it on faster roads way more enjoyable cuz engine won't be wrapped out at 3k rpm at 65-70 mph

[@kenleppek]

@mikemccabe7124 it's pretty much the same as a 4L60E only controlled through a TV cable and not solenoids. Good unit with minor upgrades. And 4 speeds vs 3 in a THM 350.

[@larrywhitman5163]

Pumping out the content 💪🏼

[@bubbaraylindy01]

Literally a banger video 😂🤣 and I had a 90 GMC with the 350 and new from the factory it was rated at a whopping 190 horsepower. And the TBI injection is 💩

[@CWILK1800]

As always another BANGER 🤙🤙

[@nealescue5172]

Back right corner of motor just right of distributor it’ll say 5.0 or 5.7

[@timcarroll6952]

I dont remember a TBI 305 in any truck but i could be wrong either way Tbi heads are terrible for flow

[@AustinHerrig]

Well....that escalated quickly 😄

[@mikenapper3725]

Great video ❤

[@ryandaleo6951]

The identifying numbers are on the passenger side of the block table that sticks out of the block

[@davidcason2668]

ATM can also build you a carburetor to the specifications of your engine via the heads and what can you put in it

[@Decoy72Racing]

The numbers are on the flat spot above the left water pump hole.

[@nolimit4730]

Why didn’t you comment during the making of the video lol 🎉🎉

[@Decoy72Racing]

@nolimit4730 they didn't tell me they were making it. Lol

[@nolimit4730]

@@Decoy72Racingit was a joke from few videos ago 😂😂 Fyi this is Frankie 😉🎉🎉

[@Decoy72Racing]

@nolimit4730 Ahhh. Well, next time, give us a heads up. Haha. But ya, the numbers on the front will tell ya exactly what it came out of. If ya can't find a web page with the break down of the code let me know. I have the books to decode all sbc.

[@brandonevans2015]

Look across the front on the heads. If they are offset it's a 305

[@markclark-qy6tf]

the flat pad above the passenger side waterpump port should have some numbers stamped in it

[@fmftalon726]

Ah roller block! Nice!

[@leonard383]

Little heat and pb blaster would of help with the pulley deal

[@mennodegoede33]

Hahaha love the mangeling of junk great vid!! Keep it up!!!

[@brandonfloyd6321]

Heads have casting numbers under valve covers. 4 bolts.

[@randalsweeting661]

Make a dune truck. Long travel suspension, paddles.big v8...zoomie exhaust

[@Bad-decisions-and-good-times]

gap rings and spray the hell outta it with a spray time controller

[@TYREEACE]

On the back of the block by the distributor on top of the block where the trans bolts on is a stamp says 5.0l or 5.7l

[@dcoyle1971]

you need to put a full manual 4l80 its the same as a t400 but with 4 gears ( by going full manual you wont need a computer to run the trans it will take a beating

[@Jdscustoms]

700R4 FTW set the kickdown tight and floor it

[@doitalldad3032]

This video brings me back to the days of “Trucks” with Stacey but it’s Two Morons garage and far more entertaining haha

[@AustinHerrig]

Two Morons Garage now has a body shop? Those Hibachi fellas better watch their step 😂

[@RaceRebuildRepeat]

We don’t use body filler we use sledge hammers

[@noahmitchell5218]

We now have both extremes of auto body 😂

[@robbovay8324]

If you squint its mint

[@robbovay8324]

😂

[@tedlambert1988]

It wasn't until 85 or 86 that they put TBI in the pickups and all of the parts from the first generation heads and intakes can be swapped with a little modification to the center two intake bolts ion the exhaust cross over runner on the intake

[@leonard383]

700’s are not bad if you build them.. 1200 buck around here too spice that up. But franks heavy foot your gonna want a turbo 400 in it.

[@DUNEATV]

That looks like a 1988 to 1994 TBI either a 305 or a 350

[@scottlance2404]

There is a specific puller for the power steering pump pulley!! Lmao. I was telling the whole time!! No don’t do it!!! Hahahahahaha. Welp. Too late now. Keep up the amazing content!! Oh and the numbers are on the block back by the distributor.

[@daniels6643]

Pretty sure what you got there with a 1987 Chevy pickup first year of the throttle body last year of that body style

[@leonard383]

lol you guys need a portal cable and a plasma cutter in your garage.

[@nolimit4730]

Even better we have a torch and big freeeeaking hammer 🎉🎉

[@anthonycapolingua4898]

Thats a hard NO 👎 lol Awesome episode of 2MG

[@sneezinhatch]

Ditch the tbi slap a carb and some nitrous on it, else case take it to can the man

[@keithteixeira1800]

Looks like a 5.7 Looks like a headlight swap only Radiator support still looks factory

[@davidcason2668]

And another thing if you're looking for fuel injection a newer company that is out is called Ace they seem to have some good quality lower expensive

[@KnownSender1]

💯💪😎

[@RaceRebuildRepeat]

Can you drive up and remove the engine with 1 hand?

[@KnownSender1]

@RaceRebuildRepeat yep when do you need it done

[@Floppydongers]

383 stroker would be sick but nothing wrong with a 350 with heads and a cam

[@midbc1midbc199]

You got quite the gallop there........ guaranteed that your cylinder pressure is not all the same and you need new rings I'm guessing

[@DirtyKnuckleFab]

Just cut both front end horns off and weld something better on the front end lol..!!😂😂😂

[@fmftalon726]

Instead of Thor's hammer! Frankie's Hammmer!

[@garynordby6789]

Big block burnout truck

[@Ilovetheinterweb.]

400 small block

[@Hyngyynj]

Gotta be a better way to identify that engine 😂

[@paul340mopar]

Welcome to a New Episode of 2 Moron's Garage.

[@justingonzalez9854]

ATM Carburetor!! Omg/SRC guys know

[@Stl5ltr]

Big block it and have a sqaure body burnout contest. I think you guys vs Merrill muffler mans yellow sqaure LS.

[@nolimit4730]

I whooped him last year with lil smokie 🎉🎉🎉 That is an idea tho 😁

[@ryandaleo6951]

The numbers are on the back driver side of the block it will tell you whether it's a 5.7 or 5.0 I'm guessing it's a 305 I've changed out quite a few of them. Build a 406 with nitrous Or a couple of turbos

[@77reynoldstroy]

It’s a lt-1 block.

[@fmftalon726]

Throw a f150 smokem in it! Coyote! The whole engine drive train and suspension collaborate with cleet and make this a bad bicsh!

[@michaeldudley9068]

Chain frame to tree and back up till she stops a few times. Or use comalongs and pull straight.

[@nolimit4730]

Go watch the video when we first got the truck. Bigger red comes into play 🎉🎉

[@wesleywaite1294]

J35 twin turbo swap. Team up with the boostedboiz. The content of everyone's heads exploding at car shows is worth it alone. 🤯

[@michaelreicks381]

Motor swap and boost before anything. Brakes next

[@nolimit4730]

Definitely 🎉🎉

[@RaceRebuildRepeat]

Who needs to stop when you have a fkn terba

[@michaelreicks381]

Or maybe find a local selling a circle track engine. 13 to 1 would sound sick and be fun for a little bit. Whatever you guys do I'm glad im here for it!

[@Mr_Beegs]

Should say 5.7 near the distributor on the block

[@foxryder7c]

At 4:35 A 327 is a 5.3L guys

[@RaceRebuildRepeat]

He did a Gen 1 sbc vs new gen 5.3

[@FangOfTruth]

That’s a Bubba truck if I ever saw one. One that you can beat on relentlessly without worrying about it. Just maybe your life.

[@Duraturd]

Go with Big block Chevy !

[@sleddheadxp800r]

They make special ps pump pulley pullers

[@nolimit4730]

Ours was special 🎉🎉

[@sleddheadxp800r]

@ yeah it was

[@LloydOAdams]

Nice

[@nolimit4730]

Deed man 😂😂

[@harlandmcnall2579]

Ha I got 454SS on the like lol

[@TylerBecham-xr9is]

Bro put a big block in it no other way to go

[@ScottVernon-y3u]

I’m from south western Pennsylvania, I have a Mercedes Benz om606 turbo diesel engine that’s already converted to manual injection you you’d like to do a om606 swap on it I’ve done 3 so far I have 1 in a jeep wrangler, 1 in a OBS gmc and 1 in a f body

[@nolimit4730]

That would be neat

[@ScottVernon-y3u]

2jz diesel with a ppump injection basically

[@JameyCampbell_54]

They’ll never put that truck back together lmao

[@drewl4762]

Franky could use some better lights in the shop!

[@nolimit4730]

Big facts I blew a wire behind the wall somewhere 🎉🎉

[@faygoforthejuggalo]

Let's go

[@RaceRebuildRepeat]

🎶 Send yo momma straight up to the store, tell that bitch to bring home a Faygo 🎶

[@fmftalon726]

Looks like 89-92 5.7 out of gmc which is pretty much same until 99 I believe

[@johnsnyder1046]

More TMG (Two Morons Garage) content 😂😁

[@theglitch99]

Cummins swap can't go wrong,........ .

[@nolimit4730]

Frick🎉🎉

[@theglitch99]

​@nolimit4730 you know it' would be great....😊

[@SandDogs]

I had a younger brother that had a 69 Camaro that he put a 327 in it and it was somewhere around 425+hp and that was on the low end of hp, that was untouchable it was a bad ass car and this a Ford guy who is bragging about it..

[@jimmyshepard6231]

On the back of the block will sat 5.0 or 5.7

[@HellmuthsHotRods]

My vote, 500 horse tree fiddy NA, T56 gear banger, drag and drive truck in the 11.51 range so no roll bar needed. That would be a cheap ripper.

[@HellmuthsHotRods]

I made this comment before you went under it on a rust tour............................

[@jessidunn8635]

Please fix it right and use it as give away I love the way it looks as is

[@nolimit4730]

This thing is way to far gone for that brother 🎉🎉

[@corbastang84]

I know it won’t happen but a coyote powered square body would be cool

[@Buy_MadeinUS]

632 crate engine.

[@burpengaryjosh5614]

Chuck some stock steelies on it, with 215's, she'll fry em'🛻🌬️

[@sociallyaggravatedgarage397]

Loss the TBI and put a Holley on that thing

[@jacobcapps8325]

“He stole money from us” meanwhile keeps posting and side by side blog doesn’t, the truth is out and they put it out by there own body language, keep making the good videos

[@AJ_Jabber]

I also believe if leo was a bad dude that you wouldnt see him invited to cleetus events or hangin with other you tubers or getting sponsors.

[@sneezinhatch]

Really if it was that bad they would go to court its been 2 years and nothing both sides have secrets will we find out probably not

[@jonhesselink795]

If you can't prove that shut up

[@c0c0asauce]

Just fyi, bringing it up does more harm than good.

[@jaredjohnston8061]

Cleet brings the video and money makers in. Don’t hate on sxs. If it weren’t for them they wouldn’t know who the fuck these two are. They got support from people taking sides. Essentially they made this channel happen. Like it or not. And they are also knowing when to get out of this world and have a normal life with their families out of the spotlight and endless hours. Never hate on someone for wanting a normal life just because you want to be up making videos at 2 in the morning.